Product Introduction
This is an Active Matrix Electrophoretic Display (AMEPD), with interface and a reference system design. The 1.54" active area contains 200x200 pixels, and has 1-bit B/W full display capabilities. An integrated circuit contains gate buffer, source buffer, interface, timing control logic, oscillator, DC-DC. SRAM. LUT, VCOM and border are supplied with each panel.
GENERAL INFORMATION |
||
---|---|---|
ITEM |
STANDARD VALUES |
UNITS |
Display Mode |
1. 54 ARREY FOR EPD |
-- |
Screen Size |
1.54 |
inch |
Display Resolution |
200(H)*200(V) |
pixel |
Active Area |
27.00 x 27.00 |
mm |
Outline dimensions |
37.32 x 31.80 x 1.05 |
mm |
Driver IC |
SSD1681 |
-- |
Pixel Pitch |
0.135x0.135 |
mm |
Storage Temperture |
0~40 |
℃ |
Operation Temperture |
-25~60 |
℃ |
Pixel Configuration |
Square |
|
Pixel Pitch |
0.135x0.135 |
mm |
Weight |
2.1士0.2 |
g |
Support partial refresh
200x200 pixels display
High contrast
High reflectance
Ultra wide viewing angle
Ultra low power consumption
Pure reflective mode
Bi-stable display
Commercial temperature range
Landscape, portrait modes
Hard-coat antiglare display surface
Ultra Low current deep sleep mode
On chip display RAM
Low voltage detect for supply voltage
High voltage ready detect for driving voltage
Internal temperature sensor
10-byte OTP space for module identification
Waveform stored in On-chip OTP
Serial peripheral interface available
On-chip oscillator
On-chip booster and regulator control for generating VCOM, Gate and Source driving voltage
l2C signal master interface to read external temperature sensor/built-in temperature sensor
Send Inquiry