28.6 inch Bar TFT LCD Display with 1920x540 Resolution,700 Brightness a-Si TFT Active Matrix for Intelligent Home Control

This specification applies to the 28.6 inch Color TFT-LCD Module. This LcD module has a TFT active matrix type liquid crystal panel 1920 x 540 pixels, and diagonal size of 28.6 inch.

Headline：28.6 inch Bar TFT LCD Display with 1920x540 Resolution,700 Brightness a-Si TFT Active Matrix for Intelligent Home Control

1.General Description

This specification applies to the 28.6 inch Color TFT-LCD Module. This LCD module has a TFT active matrix type liquid crystal panel 1920 x 540 pixels, and diagonal size of 28.6 inch. This module supports 1920x 540 mode. Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot.

The display has been designed to apply the 2 channel LVDS interface method. lt is intended to support displays where high brightness, wide viewing angle, high color saturation, and high color depth are very important. Advanced wide temperature Liquid Crystal (-40-1100C) is also applied on this model to enhance the sunlight readability.

General Information
Parameter	Specification	Units
Size	28.6	inch
Display Area	698.4 (H)x 196.4(V)	mm
Outline Dimension	722.2(H)x220.2(V)x28.9(D)	mm
Driver Element	a-Si TFT active matrix	--
Display Colors	8 bit (16.7 million)	Colors
Number of Pixels	1920x540	Pixel
Pixel Pitch	0.3637 (H)x 0.3637 (W)	mm
Pixel Arrangement	RGB vertical stripe	--
Display Operation Mode	Normally Black	--
Surface Treatment	Surface Treatment	Haze =28%
Sunglasses Readability	Landscape Mode	--
Rotate Function	Unachievable	--
Display Orientation	Landscape Enabled	--
Operating Time	24/7	--
Frame Rate	60	Hz
LED Life	50K	hours
Surface Luminance (White)	700	cd/m2

Note 1: Landscape Mode: The default placement is T-Con Side on the lower side and the image is shown uprightvia viewing from the front.

Note 2: Portrait Mode. The default placement is that T-Con side has to be placed on the left side via viewing fromthe front.

2. Drawing