flatman tft display driver free sample

Alibaba.com offers 1508 tft display 1.8 products. About 41% % of these are lcd modules, 9%% are digital signage and displays, and 1%% are mobile phone lcds.

A wide variety of tft display 1.8 options are available to you, You can also choose from original manufacturer, odm and agency tft display 1.8,As well as from tft, ips, and standard.

1 Configuration Manual FlatMan Industrial Monitor Optional with touchscreen and/ or bezel 8.4 / 21,34cm 10.4 / 26,41cm 12 / 30,48cm 15 / 38,10cm 17 / 43,18cm 19 / 48,26cm Language: English FB084SIxxDDxx FB104SIxxDDxx FB121SIxxDDxx FS150SIxxDDxx FS170SBxxDDxx FS190SBxxDDxx FS190WBxxDDxx F2150SIxxDDxx F2170SBxxDDxx F2190SBxxDDxx

3 1 INTRODUCTION 4 Product description 4 Package contents 5 Product features 5 Cleaning techniques 5 Additional - Power - Plugs - Power and extension cords - Environment 2 CONTROL FUNCTIONS 8 Control Buttons 9 OSD Control Panel - OSD control: displays of adjustments - OSD User s definition of color temeperature 3 INPUT DIAGRAMS 13 Input description 4 SETUP 14 Signal connection CONTENTS 7 MECHANICAL DIMENSIONS 20 Dimensions - 8,4 OEM - 10,4 OEM - 12 OEM - 15 OEM - 15 with bezel - 15 full metal casing - 17 OEM - 17 with bezel - 17 full metal casing - 19 OE - 19 WB - 19 with bezel - 19 full metal casing 8 SERVICE INFORMATION 27 Information 9 WINDOWS SETUP 28 Setup information 5 TROUBLESHOOTING 14 Troubleshooting guide 6 PRODUCT SPECIFICATIONS 15 Specifications - 8,4-10, (4:3) - 19 (16:10) s&t embedded GmbH Industrial Monitor Rev. 1.6 Page 2 / Display Modes

5 1. Introduction Product Description Congratulations on your purchase of a LCD monitor. It incorporates high quality display into a small light weighted module. It has power-saving capabilities and emits no radiation. You will certainly benefit from this monitor in lots of ways; to name some of them: comfort safety, and environmental protection. This LCD monitor incorporates a color active matrix thin-film-transistor (TFT) liquid crystal display to provide superior display performance. Its maximum resolution is ideal for displaying complex graphics and high definition images. Its other outstanding capabilities include audio system and OSD (On Screen Display) controls. 8.4 resolution SVGA resolution SVGA " resolution SVGA " resolution XGA " resolution SXGA "(4:3) resolution SXGA "(16:10) resolution WXGA Package Contents TFT LCD monitor D-sub signal cable (VGA) DVI cable Included with your LCD monitor are following items. If there are any missing accessories, please contact us immediately. AC power cord Power adaptor Manual Optional for touch screen models: - USB or RS232 cable - Driver CD s&t embedded GmbH Industrial Monitor Rev. 1.6 Page 4 / 32

6 Product Features High contrast color TFT LCD display Compatible VESA standards. Imbedded audio system provides sound performance. Power management system conforms to VESA DPMS standard. Support DDC 1/2B for Plug & Play compatibility. Advanced OSD control for picture quality adjustment. Detachable stand for wall-mounting application. Support HDMI V1.0 (Option only DVI model). Screen cleaning techniques - Gently clean the screen with a clean camel hair lens brush, or a soft, clean, lint-free cloth, to remove dust and other particles that can scratch the screen. - Do not apply pressure to the screen surface when wiping it clean. - Do not pour or spray any liquid directly onto the screen or casing. Chemical cleaners have been reported to damage the screen or case of the LCD monitor. Additional Read all of these instructions and save them for later use. Follow all warnings and instructions on the product. Product Do not cover block the vent holes in the case. Do not insert sharp objects or spill liquid into the LCD monitor through cabinet slots. They may cause accident fire, electric shock or failure. Disconnect the power plug from the AC outlet if you will not use it for an extended period of time. Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Do not touch the screen directly with your fingers. You may damage the screen, and oil from your skin is difficult to remove. Do not apply pressure to screen. The LCD is very delicate. s&t embedded GmbH Industrial Monitor Rev. 1.6 Page 5 / 32

7 Power Use the type of power indicated on label. Plugs Do not remove any of the prongs of the monitor s three-pronged power plug. Disconnect the power plug from the AC outlet under following conditions: - If you will not use it for an extended period time. - When the power cord or plug is damaged or frayed. - If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician. - If the product exhibits a distinct change in performance, service may be required. Connect the signal input cable and tighten it by turning the screws clockwise. Do not press the screen with your finger for a long time. This may result in damage. Avoid displaying a fixed image on the screen for a long period of time as it might end with image burn. Use a screensaver if possible. Power and extension cords Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord. Use the proper power cord with correct attachment plug type. If the power source is 120V AC, use a power cord that has UL and C-UL approvals, If the power source is a 240V AC supply, use the tandem (T blade) type attachment plug with ground conductor power cord that meets the respective European country s safety regulations, such as VDE for Germany. Do not over load wall outlets or power cords. Ensure that the total of all units plugged into the wall outlet does not exceed 10 amperes. s&t embedded GmbH Industrial Monitor Rev. 1.6 Page 6 / 32

9 2. Control Functions Control Button Front View 1. Power Switch Power switch 2. LAMP LED Power LED 3. OSD menu / select Pressing this button pops up the OSD menu on the screen. Add used to select the OSD control options on the screen This button is used to adjust the increasing 4. Adjust (increase +) value of selected This button is used to adjust the decreasing 5. Adjust (decrease-) value of selected 6. Auto adjust / select Select this function to obtain the best display efficiency. OSD Windows display is function selection s&t embedded GmbH Industrial Monitor Rev. 1.6 Page 8 / 32

10 OSD Control Panel This OSD Window status will appear when pressing the AUTO button. The screen will be automatically adjusting. If there is no VGA or DVI signal input, No Cable will display for 3 seconds. OSD Control: displays of adjustments OSD Buttons Pressing the MENU button will display OSD Windows Pressing AUTO button: left face selection function Pressing MENU button: right face selection function Pressing + button: increase the selection function value Pressing - button: decrease selection function value s&t embedded GmbH Industrial Monitor Rev. 1.6 Page 9 / 32

14 4. Setup Electrical Connection Please follow the instructions below to properly connect the LCD monitor to external electrical source. 1. Connect the female-end of the power cable to the transformer. Connect the male-end of the power cable to the wall outlet or extension cable. 2. Connect the cable from the other end of the transformer to the LCD monitor DC IN located at the back of the LCD monitor. Signal Connection 1. Power off both the LCD monitor and PC system before connecting them. 2. Take out the signal cable from the box; connect it to the signal connector at the back of the LCD monitor. 3. Connect the other end to the signal connector on the back of the PC system. 4. Please make sure the connections to both the PC system unit and the LCD monitor are strong and secure. Please don t forget to tighten the screws on each connector end. 5. Now turn on both the PC system unit and the LCD monitor. 6. After you finish setting up the LCD monitor, please set the refresh rate to 75Hz. 7. After setting up the LCD monitor, please perform Auto Adjust in OSD so that the LCD monitor will be automatically set to optimal color display each time. Please note: When you disconnect any power cable or signal cable, please do not pull the cable by grabbing the cable body. Please grab the cable connector itself whenever you try to pull the cable during disconnection. s&t embedded GmbH Industrial Monitor Rev. 1.6 Page 13 / 32

15 5. Troubleshooting Check the following before calling for service and support No image is showing Is the power cord connected to the Check and make sure that the monitor? power cord is connected to both the monitor and the power outlet Is the power LED light next to the power switch on? Is the power LED orange? Is the power on but you still don t have a picture? Do you see a No Signal message? Do you see a No Cable message? Press the power button to switch on the monitor. The LED should be green. Press Auto Adjust Check the signal cable (VGA or DVI) Is the graphic card working normally? Adjust brightness and contrast If the monitor is on No Signal in a short period the device goes into the sleeping mode/ shuts down. Connect the VGA or the DVI signal cable Display image is incorrect Display position is incorrect. Vertical bars and stripes appear on the screen? The color of the screen is abnormal There is noise on the screen or the pixels don t match Press the 6. button: AUTO adjust to automatically adjust your display to the ideal setting. Press the 6. button: AUTO adjust to automatically adjust your display to the ideal setting. Check if the signal cable is properly attached Set the color settings in the OSD Control Panel: Contrast or Color Temperature Press the 6. button: AUTO adjust to automatically adjust your display to the ideal setting Set manually in the OSD Control Panel: See OSD Contol Panel (p. 9) s&t embedded GmbH Industrial Monitor Rev. 1.6 Page 14 / 32

16 6. Product Specification 8.4 Specification 10.4 Specification Spec Type PC LCD Display 8.4" Active matrix TFT LCD panel Pixel Pitch 0.213(H) x 0.213(V) mm Max. Resolution 800(H) x 600(V) SVGA Set Size 480(W) x 330(H) x 460(D) mm Pack Size 422(H) x 426(V) x 214(D) mm ( in 10 set) Contrast Ratio 500 : 1(depending on panel spec) Brightness 230 cd/m 2 (depending on panel spec) Response Time Tr : 10ms Tf : 25ms (depending on panel spec) Display Color 265K View Angle L+/R- ±60 (depending on panel spec) U+/D (depending on panel spec) PC Interface RGB analog 0.7V peak to peak PC Video Sync. TTL positive or negative Display Mode VGA, SVGA Audio in DVI Connector Video Connector RCA Jack/ BNC Jack/ Audio Amplifier 2W 2 Power ON < 25W (maximum) consumption Frequency (Horizontal) KHz (Vertical) 56-75Hz Signal Connector D-sub 15 pin Front Control Auto adjust, Power SW with LED, OSD Menu, +/- Adjustment OSD Menu Brightness, Contrast, Auto Adjust, Clock, Phase, H-Position, V-Position, Language Power Adapter AC Input : V~1.8A, 50-60Hz DC Output : 12V/ 4.16A Operating Temperature : 0 C~40 C Conditions Humidity : 20% ~ 85% Storage Temperature : -20 C~60 C Conditions Certification Humidity : 10%~95% BSMI,FCC (DOC), CE-B, TUV/GS, UL,CUL Weight Net 1.4Kgs Gross 12.5Kgs ( in 5 set ) Type Spec LCD Display Pixel Pitch Max. Resolution DVI 10.4" Active matrix TFT LCD panel (H) x 0.264(V) mm 800(H) x 600(V) SVGA Set Size 265(W) x 208(V) x 48(D) mm Pack Size 395(W) x 320(H) x 275(D) mm ( in 5 set) Contrast Ratio 500 : 1(depending on panel spec) Brightness 230 cd/m 2 (depending on panel spec) Response Time Tr : 10ms Tf : 25ms (depending on panel spec) Display Color 265K View Angle L+/R- ±60 (depending on panel spec) U+/D (depending on panel spec) PC Interface RGB analog 0.7V peak to peak PC Video Sync. TTL positive or negative Display Mode VGA, SVGA Audio in DVI Connector Video Connector RCA Jack/ BNC Jack/ Audio Amplifier 2W 2 Power ON < 25W (maximum) consumption Frequency (Horizontal) KHz (Vertical) 56-75Hz Signal Connector D-sub 15 pin Front Control Auto adjust, Power SW with LED, OSD Menu, +/- Adjustment OSD Menu Brightness, Contrast, Auto Adjust, Clock, Phase, H-Position, V-Position, Language Power Adapter AC Input : V~1.8A, 50-60Hz DC Output : 12V/ 4.16A Operating Temperature : 0 C~40 C Conditions Humidity : 20% ~ 85% Storage Temperature : -20 C~60 C Conditions Certification Humidity : 10%~95% BSMI,FCC (DOC), CE-B, TUV/GS, UL,CUL Weight Net 1.4Kgs Gross 12.5Kgs ( in 5 set ) s&t embedded GmbH Industrial Monitor Rev. 1.6 Page 15 / 32

17 12 Specification Spec Type DVI LCD Display 12" Active matrix TFT LCD panel Pixel Pitch (H) x (V) mm Max. 800(H) x 600(V) SVGA Resolution Set Size 310(W) x 239(H) x 46(D) mm Pack Size 472(W) x 393(H) x 341(D) mm ( in 5 set) Contrast Ratio 500 : 1(depending on panel spec) Brightness 400 cd/m 2 (depending on panel spec) Response Time Tr : 10ms Tf : 20ms (depending on panel spec) Display Color 262K View Angle ±60 (depending on panel spec) L+/R- U+/D (depending on panel spec) PC Interface RGB analog 0.7V peak to peak PC Video Sync. TTL positive or negative Display Mode VGA, SVGA Video DVI connector Connector Audio Amplifier 2W 2 Power consumption ON < 25W (maximum) Frequency (Horizontal) KHz (Vertical) 56-75Hz Signal D-sub 15 pin Connector Front Control Auto adjust, Power SW with LED, OSD Menu, +/- Adjustment OSD Menu Brightness, Contrast, Auto Adjust, Clock, Phase, H-Position, V-Position, Language Power Adapter AC Input : V~1.8A, 50-60Hz DC Output : 12V/ 4.16A Operating Conditions Temperature : 0 C~40 C Humidity : 20% ~ 85% Storage Conditions Certification Temperature : -20 C~60 C Humidity : 10%~95% BSMI,FCC (DOC), CE-B, TUV/GS, UL,CUL Weight Net 2.0Kgs Gross 16.5Kgs ( in 5 set ) s&t embedded GmbH Industrial Monitor Rev. 1.6 Page 16 / 32

18 15 Specification 17 Specification Type Spec DVI LCD Display 15" Active matrix TFT LCD panel Pixel Pitch 0.297(H) x 0.297(V) mm Max. Resolution 1024(H) x 768(V) XGA Set Size 392(W) x 300(H) x 50(D) mm Pack Size 565(H) x 410(V) x 515(D) mm (in 5 set) Contrast Ratio 500 : 1 (depending on panel spec) Brightness 300 cd/m 2 (depending on panel spec) Response Time Tr : 12ms Tf : 4ms (depending on panel spec) Display Color M View Angle L+/R- ±80 (depending on panel spec) U+/D (depending on panel spec) PC Interface RGB analog or digital 0.7V peak to peak PC Video Sync. TTL positive or negative Display Mode VGA, SVGA, XGA Video Connector DVI Connector Power consumption ON < 40W (maximum) Frequency (Horizontal) KHz (Vertical) 56-75Hz Signal Connector D-sub 15 pin Front Control Auto adjust, Power SW with LED, OSD Menu, +/- Adjustment Power Adapter AC Input : V~1.8A, 50-60Hz DC Output : 12V/ 4A or 4.14\6A Operating Temperature : 0 C~40 C Conditions Humidity : 20% ~ 85% Storage Temperature : -20 C~60 C Conditions Humidity : 10%~95% Certification Weight FCC (DOC), CE-B, Net 3.24Kgs Net 7.1Kgs Weight Gross 21.9Kgs ( in 5 set ) Type Spec DVI LCD Display 17" Active matrix TFT LCD panel Pixel Pitch 0.264(H) x 0.264(V) mm Max. Resolution 1280(H) x 1024(V) SXGA Set Size 442(W) x 361(H) x 52(D) mm Pack Size 552(W) x 490(H) x 535(D) mm (in 5 set) Contrast Ratio 400 : 1 (depending on panel spec) Brightness 250 cd/m 2 (depending on panel spec) Response Time Tr : 15ms Tf : 10ms (depending on panel spec) Display Color M View Angle L+/R- L+/R- ±85 U+/D- ±85 U+/D (depending on panel spec) PC Interface RGB analog or digital 0.7V peak to peak PC Video Sync. TTL positive or negative Display Mode VGA, SVGA, XGA, SXGA Video Connector DVI Connector Power consumption ON < 45W (maximum) Frequency (Horizontal) KHz (Vertical) 56-75Hz Signal Connector D-sub 15 pin Front Control Auto adjust, Power SW with LED, OSD Menu, +/- Adjustment Power Adapter AC Input : V~1.8A, 50-60Hz DC Output : 12V/ 5.0A Operating Temperature : 0 C~40 C Conditions Humidity : 20% ~ 85% Storage Temperature : -20 C~60 C Conditions Humidity : 10%~95% Certification Weight BSMI,FCC (DOC), CE-B, Net 4.4Kgs Net 9.8Kgs Weight Gross 31.4Kgs ( in 5 set ) F2150 monitor s weight is different due to the full metal casing. F2170 monitor s weight is different due to the full metal casing. s&t embedded GmbH Industrial Monitor Rev. 1.6 Page 17 / 32

19 19" (4:3) Specification 19 (16:10) Specification Type Spec DVI LCD Display 19" Active matrix TFT LCD panel Pixel Pitch 0.294(H) x 0.294(V) mm Max. 1280(H) x 1024(V) SXGA Resolution Set Size 442(W) x 361(H) x 52(D) mm Pack Size 552(W) x 490(H) x 535(D) mm ( in 5 set) Contrast 700 : 1(depending on panel spec) Ratio Brightness 250 cd/m 2 (depending on panel spec) Response Tr : 16ms Tf : 9ms Time (depending on panel spec) Display Color M View Angle ±85 (depending on panel spec) L+/R- U+/D- ±85 (depending on panel spec) PC Interface RGB analog 0.7V peak to peak PC Video TTL positive or negative Sync. Display Mode VGA, SVGA, XGA, SXGA Video DVI Connector Connector Power ON < 46W (maximum) consumption Frequency (Horizontal) KHz (Vertical) 56-75Hz Signal D-sub 15 pin Connector Auto adjust, Power SW with LED, Front Control OSD Menu, +/- Adjustment Brightness, Contrast, Auto OSD Menu Adjust, Clock, Phase, H-Position, V-Position, Language Power AC Input : V~1.8A, Adapter 50-60Hz DC Output : 12V/ 5.0A Operating Temperature : 0 C~50 C Conditions Humidity : 20% ~ 85% Storage Temperature : -20 C~60 C Conditions Humidity : 10%~95% Certification FCC (DOC), CE Weight Net 5.2Kgs N Net 10,8Kgs Weight Gross 36.4Kgs ( in 5 set ) Spec Type DVI LCD Display 19" Active matrix TFT LCD panel Pixel Pitch 0.285(H) x 0.285(V) mm Max. 1440(H) x 900(V) WXGA+ Resolution Set Size 456(W) x 331(H) x 54(D) mm Pack Size 566(W) x 413(H) x 535(D) mm ( in 5 set) Contrast 500 : 1(depending on panel spec) Ratio Brightness 300 cd/m 2 (depending on panel spec) Response Tr : 7ms Tf : 11ms Time (depending on panel spec) Display Color M View Angle ±85 (depending on panel spec) L+/R- U+/D- ±85 (depending on panel spec) PC Interface RGB analog 0.7V peak to peak PC Video Sync. TTL positive or negative Display Mode VGA, SVGA, XGA, SXGA Video DVI Connector Connector Power ON < 46W (maximum) consumption Frequency (Horizontal) KHz (Vertical) 56-75Hz Signal Connector D-sub 15 pin Auto adjust, Power SW with LED, OSD Menu, Front Control +/- Adjustment OSD Menu Power Adapter Brightness, Contrast, Auto Adjust, Clock, Phase, H-Position, V-Position, Language AC Input : V~1.8A, 50-60Hz DC Output : 12V/ 5.0A Temperature : 0 C~50 C Humidity : 20% ~ 85% Temperature : -20 C~60 C Humidity : 10%~95% Operating Conditions Storage Conditions Certification FCC (DOC), CE Weight Net 5.2Kgs Net 10,8Kgs Weight Gross 36.4Kgs ( in 5 set ) F2190 monitor s weight is different due to the full metal casing. s&t embedded GmbH Industrial Monitor Rev. 1.6 Page 18 / 32

20 PC Display Modes Mode Model Resolution H Freq (KHz) V Freq (Hz) 1 15" 17" 19" " 17" 19" " 17" 19" " 17" 19" " 17" 19" " 17" 19" " 17" 19" " 17" 19" " 19" " 19" PC Display Modes FS190WB Mode Resolution H Freq (KHz) V Freq (Hz) PC (VGA&HDMI) Display Modes 8.4 Mode Resolution H Freq (KHz) V Freq (Hz) PC (VGA&HDMI) Display Modes 12 Mode Resolution H Freq (KHz) V Freq (Hz) s&t embedded GmbH Industrial Monitor Rev. 1.6 Page 19 / 32

After execution, the driver will be installed. The system will automatically restart, and the display screen will rotate 90 degrees to display and touch normally.

( " XXX-show " can be changed to the corresponding driver, and " 90 " can be changed to 0, 90, 180 and 270, respectively representing rotation angles of 0 degrees, 90 degrees, 180 degrees, 270 degrees)

INT070ATFT and INT070ATFT-TS are embedded display driver boards based on the Displaytech 7 inch 800 x 480 RGB resolution TFT display module. This embedded driver board includes a 7" standard or resistive touchscreen display. Mounted on the embedded board is the Solomon Systech SSD1963 LCD controller that supports common RAM-less LCD drivers and offers the following features and benefits: