raypak rp2100 lcd display free sample

Heater works great but the display is funky. It functions perfectly but the digits on the very top for the temperature setting are not displaying anything legible. The current temperature display below that is fine. What part do I need to see the entire display?

Hello Daryl. According to Raypak, the display is part number 013640F. LCD Display Screen Only - 013640F General installation instructions can be viewed on Youtube Raypak, Pool Heater Model C-R206A Up To CR406A LCD Attached please find the Installation and Operation Manual for the Raypak 406A Series Gas Heaters. INSTALLATION AND OPERATION MANUAL

My boiler is working well and without any issues however the digital display has begun to fail and become illegible. Is this the correct replacement for my unit? Thanks.

Hello. The Raypak Heater PCB Control Kit 013464F is a compatible replacement Main PCB for your Raypak Heater model P-M266A-EN-C. Raypak Heater PCB Control Kit - 013464F The display board only is available as Raypak part number 013640F. LCD Display Screen Only - 013640F

My pool heater it is working fine however the LCD digital display is broken and I can"t read the temperature in the LCD. Is the Display Screen - 013640F the correct replacement part to fix the issue ?

Hi Dio, We are showing that this is not the correct replacement. The proper replacement is this 017110F Board however this part has been discontinued by the manufacturer without a replacement. It might be time for a new heater, something like this Raypak 336AEN Pool Heater

I have a Raypak P-R336A-EN-Y heater (serial # is 1204140001) and can no longer read the display. All else works perfect. Will the 013640F LCD Display fix the problem or do I need to replace the entire PC board?

It could be either your display panel, board, or sensor. At this point, I would recommend giving Raypak a direct call to see if they can direct you in the best direction to fixing this.

Hello, wondering if this part will work for me. My heater no longer displays the temperature. All else works great with the heater. Appreciate your help.

Wow, thank you for your quick response! I would have thought all i needed was the display portion. That"s a big difference going from a small inexpensive part to a $300 part. Is that because of the make/model?

I believe the difference is that the one you require is both the PCB and Display where this item is just the display. For your model when replacing you have to replace both.

Hi Jim, This will work if your unit was manufactured after May of 2011. The heater’s model and serial numbers are located on the rating plate found on the inside of the unit. To locate the rating plate, first loosen the door screw. Remove the door(s), pull up and out. The rating plate will be either a gold or silver color with the Raypak logo. The serial number will have 10 digits. The date code is found in the first four digits of the serial number, for example, a unit made in April of 2001 will have the first four digits read as 0104.

Hi, DJ. Unfortunately, this LCD Display Screen - 013640F is NOT compatible with your unit if you have the original PCB. The PC Board Control IID Unit - 010253F has been discontinued for your unit.

Ok...so here is the board that is currently in our heater(see attached pic). It was replaced at some point. So...back to my original question :) any ideas on how I can get the display replaced? Thank you so much for all your time and assistance. DJ

Will this LCD display work with Model # P-M266A-EN-C S/N 1509283404? Is there any difficulty in installing this part and do I need any other parts if I replace this LCD Display? The display is barely visible but the unit is running fine.

It"s the time of year and pool is in the process of being opened . Went to test the Heater ( Raypak 399K Natural Gas Nickle ) and the panel flickers with all hashes..

I powered on my Raypak heater after having my pool replastered. The LCD panel immediately is showing "sensor open". Before draining the pool, I removed both drain plugs, turned off the breaker, turned off the gas, and covered the heater. We had snow here in Colorado over Labor...

We have a plumber who can come out Saturday to plumb the heat pump (RayPak 8345ti) but the electrician might not be able to make it in time. Does it matter if it"s plumbed before it has power?

OK Guys, I have an interesting situation. I currently have a 15 yr old Raypak 406a P-M406A-EN-C natural gas that needs replacement; it fires up properly but the firewall is so old it overheats. Here"s the situation - I"ve found a professional series 409a that is propane B-R409A-EP-X. Would I...

I have a 24’ round pool in Michigan. We’re looking to get a heater and are between the Raypak 156 and 206. I don’t plan on running it constantly, just a few hours on the mornings I know we will swim and water is cold. Does anyone have experience with either? Obviously the 206 is a more expensive...

This year I replaced my Raypak 206a with the same model. I’m getting a sensor failure code. Since this happened already once this year and was a loose connection on the thermistor I think I just need to buy two new thermistors. I’m having trouble identifying the part. The troubleshooting guide...

In shopping for a new heater, specifically Raypak 406a natural gas... I have stumbled across a few different variants but can"t quite tell what the differences are if any....

My 15 year old Hayward H400 is giving an IO code and it"s probably time for a new heater. Thinking about a new Raypak, open to other suggestions and/or reccomendaions. Thanks in advance for your help!

My Raypak RP2100 pool heater shuts off after short periods. It ignites just fine. The igniter is fairly new, I replaced it myself a few years back. I had the heater running once this season prior to now and it ran like magic for 24 hours. Nothing (such as valves etc) has been...

INSTALLATION AND OPERATING INSTRUCTIONS Models P-R185A to P-R405A C-R185A to P-R405A Low NOx P-R185AL to P-R405AL C-R185AL to C-R405AL RP2100 SWIMMING POOL SPA HEATER WARNING: If the information in these instructions are not followed exactly, a fire or explosion may result causing property damage, personal injury or death. —...

TO WHOM IT MAY CONCERN: The new Raypak series RP2100 pool heaters have been designed to eliminate the need for conventional heat sinks (high temperature piping). The initial connection to the heater is made with a 2" PVC union adapter to which PVC may then be connected with appropriate cement.

Plumbing from the heater back to the pool must not have any valves or restriction that could prevent flow when the pump is operating. CAUTION: A source of additional heated water, i.e. solar systems, must be connected to the heater outlet pipe. If this is connected to the heater inlet, incorrect pool water temperature readings will be displayed on the heater control panel.

ADDENDA: LOW NOx POOL HEATERS The Raypak Low Nox Pool Heaters are certified and tested under the ANSI Z21.56.CSA 4.7 Standards for gas fired pool heaters. The heater should be installed to meet all local codes, the latest editions of the National Fuel Gas Code Z223.1 and the National Electrical Code, ANSI/NFPA 70.

SECTION 6/REPLACEMENT PARTS LIST NOTE: To supply the correct part it is important that you state the model number, serial number and type of gas when applicable. Any part returned for replacement under standard company warranties must be properly tagged with RAYPAK return parts tag, completely filled in with the heater serial number, model number, etc., and shipped to the Company freight prepaid.

www.raypak.com Raypak, Inc., 2151 Eastman Avenue, Oxnard, CA 93030 (805) 278-5300 FAX (800) 872-9725 Raypak Canada LTD, 2805 Slough Street, Mississauga, Ontario, Canada L4T 1G2 (905) 677-7999 FAX (905) 677-8036 Raypak Australia Pty. Ltd, 7 Geddes St., Mulgrave, Victoria, Australia 3170 (6139) 560 4944 FAX (6139) 560 4974 Litho in U.S.A.

CATALOG NO. 6000.52-Z Effective: 11-01-01 Replaces: 08-01-01 INSTALLATION AND OPERATING INSTRUCTIONS Models P-R185A to P-R405A C-R185A to P-R405A Low NOx P-R185AL to P-R405AL C-R185AL to C-R405AL RP2100 SWIMMING POOL and SPA HEATER WARNING: If the information in these instructions are not followed exactly, a fire or explosion may result causing property damage, personal injury or death. — Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

TO WHOM IT MAY CONCERN: The new Raypak series RP2100 pool heaters have been designed to eliminate the need for conventional heat sinks (high temperature piping). The initial connection to the heater is made with a 2" PVC union adapter to which PVC may then be connected with appropriate cement. This newly authorized piping arrangement is described in the installation manual provided by Raypak, and has been successfully tested by Raypak to assure its acceptability. Larry J. Ashton, P.E.

PART ONE - OWNER"S OPERATING INSTRUCTIONS FOR YOUR SAFETY - READ BEFORE OPERATING WARNING: IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTLY, A FIRE OR EXPLOSION MAY RESULT, CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE. SECTION 1 / START-UP PROCEDURES Your Raypak Pool/Spa heater has been designed for years of safe and reliable pool/spa water heating. It is available in millivolt or electronic control options. ASME certified units, typical used in commercial applications, are also available.

RP2100+ Heat Exchanger Reversal Procedure (Capron Resin Header Models) 1. Remove right and left side access panels (Figure 1). 2. Disconnect wires at high limit, AGS (automatic gas shutoff), and pressure switch on the inlet/outlet header (Figure 2). 3. Electronic Ignition Heaters: Remove the thermostat temperature sensor by loosening the compressionfitting nut (Figure 3). Reroute the sensor to the left side of the heater. 4.

SECTION 4 / SERVICING INSTRUCTIONS GENERAL LOCATION OF CONTROLS Drain Plug (Located in Return Header) CONTROLS/ADJUSTMENTS/REPLACEMENTS Bypass Temperature Adjust Buttons Hi Limit (Located in Return Header) Mode Button LCD Display AGS HiLimit (Located in Inlet/ Oulet Header) Ignition Control (IID) Digital Thermostat Module Unitherm Governor Roll-Out Switch Fig. #2000 Drain Plug Gas Valve Pilot On-Off Switch Transformer Fig #2005 CONTROL PANEL REMOVAL 1.

ELECTRONIC CONTROLS The pool heater thermostat on the upper front panel of the heater controls the pool/spa water temperature. This control center contains a mode button, up and down temperature adjustment buttons, and a LCD display. The MODE button functions as a means to turn the heater off or on in either the pool or spa temperature setting. The LCD display indicates the mode the heater is in and the actual water temperature.

RP2100 REMOTE CONTROL INSTALLATION CAUTION: Before installing remote controls to the RP2100 Digital Heater, read the following: The Raypak RP 2100 Digital Heater is remote ready in most cases. The digital liquid crystal (LCD) display shows the actual pool temperature, operating status, and service codes (See examples below). The touch pad on the control panel allows you to select the desired pool or spa temperature.

ADDENDA: LOW NOx POOL HEATERS The Raypak Low Nox Pool Heaters are certified and tested under the ANSI Z21.56.CSA 4.7 Standards for gas fired pool heaters. BURNER ADJUSTMENT This burner assembly does not require any primary air adjustments. The heater should be installed to meet all local codes, the latest editions of the National Fuel Gas Code Z223.1 and the National Electrical Code, ANSI/NFPA 70. VISUAL INSPECTION Flame can be observed through the slot opening above the plenum.

ELECTRICAL ( STANDING PILOT MILLIVOLT) RAYPAK POOL OR SPA HEATER ELECTRICAL CHECK WITH MV GAS VALVE CAUTION: For qualified service personnel only. 1. Filter must be on with adequate water flow through heater. 2. Gas valve must be "ON" position. Thermostat set higher than pool water temperature. 3. Jumpers are for temporary check only. If left in place, they could cause the heater to burn up.

LIMITED WARRANTY RAYPAK RESIDENTIAL SWIMMING POOL AND SPA HEATERS GAS MODELS 185, 265, 335 & 405 MILLIVOLT 185, 265, 335 & 405 ELECTRONIC GENERAL Raypak, Inc. warrants that the cabinet, burner tray (minus controls) and refractory will be free from defects in materials and workmanship under normal use and service for a period of FIVE YEARS FROM THE DATE OF ORIGINAL PURCHASE FOR A SINGLE FAMILY RESIDENCE (ONE YEAR IF OTHER THAN FOR SINGLE FAMILY RESIDENCE USE).

www.raypak.com Raypak, Inc., 2151 Eastman Avenue, Oxnard, CA 93030 (805) 278-5300 FAX (800) 872-9725 Raypak Canada LTD, 2805 Slough Street, Mississauga, Ontario, Canada L4T 1G2 (905) 677-7999 FAX (905) 677-8036 Raypak Australia Pty. Ltd, 7 Geddes St., Mulgrave, Victoria, Australia 3170 (6139) 560 4944 FAX (6139) 560 4974 Litho in U.S.A.

Raypak pool heaters have developed a reputation for being reliable, efficient and long-lasting. That’s why Pool Express offers a large selection of Raypak heaters, for commercial and residential swimming pools. The Raypak heaters are available in propane, natural gas and electric. to meet the needs of any type of pool owner.Raypak pool heaters have designed a self-diagnostic feature that comes standard on all their heaters. The self-diagnostic feature was created to save you time and money because it will remind you when it’s time for cleaning and if it needs service. Beyond the self-diagnostic feature, Raypak heaters are eco-friendly, and are low NOx heaters. The choices from Raypak are broad enough to fit different types of pool owners in any climate.

A pool heater that runs smoothly is a pool owner"s dream. But, for some people, the output of their pool heater and temperature of their pool water remains a mystery after the LCD on their Raypak heater has broken down. Over years of use, the LCD display on any pool heater will be exposed to the sun, moisture, and harsh pool chemicals, which can cause your display to stop functioning.

If you"ve missed the ability to read the status of your pool and heater at a glance, you"ll be happy to know that replacements are available for Raypak pool heaters.

The Raypak 013640F LCD Display has been designed to provide a full replacement for the LCD Displays on Raypak RP2100 heaters (that were manufactured after 2011). This small and affordable part can bring your LCD display back to life with a fast and easy repair.

There is one thing to keep in mind for RP2100 Raypak heater owners. The 013640F Raypak 013640F LCD Display is a match only for RP2100 heaters that were manufactured after 2011. If you"re in need of a new display for an older Raypak model, the 013640F display may not be the right fit for your heater.

Raypak / Rheem Digital Heaters, Electronic Ignition (Manufactured From 05/2011) - P-R206A-EN-C, P-R206A-EP-C, P-R266A-EN-C, P-R266A-EP-C, P-R336A-EN-C, P-R336A-EP-C, P-R406A-EN-C, P-R406A-EP-C

Raypak / Rheem Digital Heaters, Electronic, Salt Water (Manufactured From 05/2011) - P-R206A-EN-X, P-R206A-EP-X, P-R266A-EN-X, P-R266A-EP-X, P-R336A-EN-X, P-R336A-EP-X, P-R406A-EN-X, P-R406A-EP-X