raypak rp2100 lcd display brands

Heater works great but the display is funky. It functions perfectly but the digits on the very top for the temperature setting are not displaying anything legible. The current temperature display below that is fine. What part do I need to see the entire display?

Hello Daryl. According to Raypak, the display is part number 013640F. LCD Display Screen Only - 013640F General installation instructions can be viewed on Youtube Raypak, Pool Heater Model C-R206A Up To CR406A LCD Attached please find the Installation and Operation Manual for the Raypak 406A Series Gas Heaters. INSTALLATION AND OPERATION MANUAL

My boiler is working well and without any issues however the digital display has begun to fail and become illegible. Is this the correct replacement for my unit? Thanks.

Hello. The Raypak Heater PCB Control Kit 013464F is a compatible replacement Main PCB for your Raypak Heater model P-M266A-EN-C. Raypak Heater PCB Control Kit - 013464F The display board only is available as Raypak part number 013640F. LCD Display Screen Only - 013640F

My pool heater it is working fine however the LCD digital display is broken and I can"t read the temperature in the LCD. Is the Display Screen - 013640F the correct replacement part to fix the issue ?

Hi Dio, We are showing that this is not the correct replacement. The proper replacement is this 017110F Board however this part has been discontinued by the manufacturer without a replacement. It might be time for a new heater, something like this Raypak 336AEN Pool Heater

I have a Raypak P-R336A-EN-Y heater (serial # is 1204140001) and can no longer read the display. All else works perfect. Will the 013640F LCD Display fix the problem or do I need to replace the entire PC board?

It could be either your display panel, board, or sensor. At this point, I would recommend giving Raypak a direct call to see if they can direct you in the best direction to fixing this.

Hello, wondering if this part will work for me. My heater no longer displays the temperature. All else works great with the heater. Appreciate your help.

Wow, thank you for your quick response! I would have thought all i needed was the display portion. That"s a big difference going from a small inexpensive part to a $300 part. Is that because of the make/model?

I believe the difference is that the one you require is both the PCB and Display where this item is just the display. For your model when replacing you have to replace both.

Hi Jim, This will work if your unit was manufactured after May of 2011. The heater’s model and serial numbers are located on the rating plate found on the inside of the unit. To locate the rating plate, first loosen the door screw. Remove the door(s), pull up and out. The rating plate will be either a gold or silver color with the Raypak logo. The serial number will have 10 digits. The date code is found in the first four digits of the serial number, for example, a unit made in April of 2001 will have the first four digits read as 0104.

Hi, DJ. Unfortunately, this LCD Display Screen - 013640F is NOT compatible with your unit if you have the original PCB. The PC Board Control IID Unit - 010253F has been discontinued for your unit.

Ok...so here is the board that is currently in our heater(see attached pic). It was replaced at some point. So...back to my original question :) any ideas on how I can get the display replaced? Thank you so much for all your time and assistance. DJ

Will this LCD display work with Model # P-M266A-EN-C S/N 1509283404? Is there any difficulty in installing this part and do I need any other parts if I replace this LCD Display? The display is barely visible but the unit is running fine.