raypak rp2100 lcd display for sale

Heater works great but the display is funky. It functions perfectly but the digits on the very top for the temperature setting are not displaying anything legible. The current temperature display below that is fine. What part do I need to see the entire display?

Hello Daryl. According to Raypak, the display is part number 013640F. LCD Display Screen Only - 013640F General installation instructions can be viewed on Youtube Raypak, Pool Heater Model C-R206A Up To CR406A LCD Attached please find the Installation and Operation Manual for the Raypak 406A Series Gas Heaters. INSTALLATION AND OPERATION MANUAL

My boiler is working well and without any issues however the digital display has begun to fail and become illegible. Is this the correct replacement for my unit? Thanks.

Hello. The Raypak Heater PCB Control Kit 013464F is a compatible replacement Main PCB for your Raypak Heater model P-M266A-EN-C. Raypak Heater PCB Control Kit - 013464F The display board only is available as Raypak part number 013640F. LCD Display Screen Only - 013640F

My pool heater it is working fine however the LCD digital display is broken and I can"t read the temperature in the LCD. Is the Display Screen - 013640F the correct replacement part to fix the issue ?

Hi Dio, We are showing that this is not the correct replacement. The proper replacement is this 017110F Board however this part has been discontinued by the manufacturer without a replacement. It might be time for a new heater, something like this Raypak 336AEN Pool Heater

I have a Raypak P-R336A-EN-Y heater (serial # is 1204140001) and can no longer read the display. All else works perfect. Will the 013640F LCD Display fix the problem or do I need to replace the entire PC board?

It could be either your display panel, board, or sensor. At this point, I would recommend giving Raypak a direct call to see if they can direct you in the best direction to fixing this.

Hello, wondering if this part will work for me. My heater no longer displays the temperature. All else works great with the heater. Appreciate your help.

Wow, thank you for your quick response! I would have thought all i needed was the display portion. That"s a big difference going from a small inexpensive part to a $300 part. Is that because of the make/model?

I believe the difference is that the one you require is both the PCB and Display where this item is just the display. For your model when replacing you have to replace both.

Hi Jim, This will work if your unit was manufactured after May of 2011. The heater’s model and serial numbers are located on the rating plate found on the inside of the unit. To locate the rating plate, first loosen the door screw. Remove the door(s), pull up and out. The rating plate will be either a gold or silver color with the Raypak logo. The serial number will have 10 digits. The date code is found in the first four digits of the serial number, for example, a unit made in April of 2001 will have the first four digits read as 0104.

Hi, DJ. Unfortunately, this LCD Display Screen - 013640F is NOT compatible with your unit if you have the original PCB. The PC Board Control IID Unit - 010253F has been discontinued for your unit.

Ok...so here is the board that is currently in our heater(see attached pic). It was replaced at some point. So...back to my original question :) any ideas on how I can get the display replaced? Thank you so much for all your time and assistance. DJ

Will this LCD display work with Model # P-M266A-EN-C S/N 1509283404? Is there any difficulty in installing this part and do I need any other parts if I replace this LCD Display? The display is barely visible but the unit is running fine.

Parts for all Raypak products parts including Water Heaters, Pool & Spa, Heating boilers are available through independent contractors who install and maintain Raypak products.

Find quality products and parts in the new Master Catalog which is a complete reference to Raypak authorized replacement parts. Find images and descriptions of products that are stocked and ready to ship. There is no need to go anywhere else for your professional HVAC, Water Heater parts, supplies, accessories and services.

Hi I have a Raypak natural gas heater (266k btu, model P-R266-A-EN-C). The digital display is not displaying at times. I"ve seen it happen 3 times in the past month. Does anyone have any insight as to an impending issue that I can correct now (before it costs more later). Everything works fine otherwise. Even when the display doesn"t show I can still adjust the temp. btw, when it doesn"t display it"s the entire screen (not like some displays and some doesn"t). Thanks for any advice you can provide.

I own a Raypak RP2100 Digital with a failing LCD and I wanted to see if I could get some follow up info on something RepairGuy wrote several months ago.

I think this implies that the LCD is not required to operate the unit. I have never really used the LCD, I simply turn the unit on using the on/off rocker switch and click the red "Temp" switch to max which is about right for my spa (~105Deg F). Recently my heater is only only getting to about 85 Deg F, despite cleaned filters etc.

Yes, it is absolutely safe to buy Raypak LCD Display Module 013464F PCB 013640F from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.