laptop lcd panel connector pinout brands

This is a page where you can find common laptop/desktop LCD panel pinouts and see if your laptop screen"s pinout matches any one of them (it likely does!).

This is a very common pinout for higher-resolution CCFL displays. If you have a 1440x900, 1400x1050 or 1680x1050 panel, it"s likely using this pinout.

This is a pinout for desktop LCD monitor screens - laptop panels do not use this pinout (if there are some, let me know). If you"re ordering a MT6820 (MT561) board, it will arrive with a cable that has this specific pinout and is therefore incompatible with laptop screens - as you"re likely here to reuse a laptop screen, you will want to either rewire the cable you get, or order a suitable cable (for either A or B pinout, whichever you need) from the beginning.

This is a pinout for older, 1024x768 and similar laptop screens, CCFL-equipped ones. 1024x768 screens used both the A pinout, this pinout and even a different pinout with a connector I haven"t made a description for yet, so if you have a 1024x768 screen you"d like to reuse, there"s three possible options and you need to check which one you have before you buy/reuse/build a cable.

This is a pinout that"s, apparently, specific to a select range of 18.5" 1366x768 displays used in desktop LCD monitors. It"s not compatible with either A, B or C pinouts, and requires a specifically wired cable.

In some datasheets, the pinout will list extra pins - one before and one after the main pins, both would be described something like "shield GND". So, for a FI-X 30-pin connector, you might find a pinout in your datasheet that lists 32 pins instead of 30. These two pins are not "real" connector pins and you shouldn"t worry about them - they"re pins that the manufacturer decided to mention for some reason, but they"re not relevant when you are actually connecting to the panel.

Buying a replacement laptop screen can be easy if you find a skilled supplier and take the time to read the information provided on the LCD supplier"s website. In more recent years, laptop screen manufacturers have started supplying identical screens that have connectors in different positions. This of course can cause a problem for you if you do not understand screen connector positioning.

On the back of your laptop screen there will be a connector, often referred to as a 20 PIN, 30 PIN or 40 PIN connector. The connector is for the picture signal that comes from the base of the laptop. A flat grey cable will come from the base of the laptop and connect to the connector on the back of the laptop screen. The cable from the base of the laptop can come from either the left or right hand sides (when looking from the back) of the base and therefore you can have the same screen with either a left side or right side connector.

The connector position is always taken from the BACK of the screen, not the front. You have to remove the screen to view the connector position. Do not view the screen from the front and go by the side the cable goes up, as you cannot see where the connector is from the front.

In fact the very same model of laptop can come fitted with screens with left and right connectors, depending on the cables used at the time of manufacture by the laptop maker. In addition to this, we advise that you check the connector position with the screen fitted to the laptop because some manufacturers fit screens upside down which can cause confusion. You want the connector position with the screen in place, from the rear.

Over the years connectors on laptop and tablet screens have changed. Different standards have come and gone and so the sizes and types of connectors vary. Some laptop models can have more than one screen type, especially DELL and Clevo, and some of the older top end Sony machines. Typical connector size are 20 pins, 30 pins and 40 pins although some specialist screens have come with 50 pin connectors. There is also an Acer model with a 34 pin connector screen made by Lucom.

If you inspect the rear of your screen and identify the connector position you can carefully inspect it and you will see the pin connectors and be able to count them. The image below shows this in detail. If you are unable to see the connector pins you may need to use a magnifying glass.

You see that the back of the screen has a socket that you can count the pins on and the signal cable you can also inspect and you will be able to count the pins. This example picture shows a 30 pin connector. It"s imperative you select a screen that has the same connector as the original. If there are multiple connector options for your machine we will show you them. Usually you would need to remove your old screen to match it via the specs and photographs on our website. If there is only one option listed on our site you can buy without checking this.

Usually, contrary to popular belief it isn"t to make our lives difficult. Usually cost saving measures are the cause of this as many 15.6" bottom left hand connector screens are in fact technically top right hand side screens, fitted upside down. With a screen fitted upside down, the connector is now at the bottom and far less cable is required from the base of the laptop to the screen connector.

Availability can also be an issue as screen models become obsolete or unavailable manufacturers are forced to buy alternate screens for their laptops and change the LCD cable to match. This can cause the same model of laptop to have different screens that are not compatible due to connector positioning.

If the motherboard is indeed dead, you can easily remove the connector that you want to salvage by using a product known as "Chip Quik". This is a low-temperature solder alloy that is specifically designed to contaminate the existing solder on the board so as to reduce the melt temperature to a very low value.

Note that you don"t need a hot-air rework station to use this product - a standard soldering iron is all that you need. The contaminated solder remains molten for a very long time and you simply float the connector off the board.

After you have removed the connector that you are salvaging, simply flood the connector pins with regular solder so as to wash off the low-temp alloy. The connector should be completely usable.

There are many LCD screen manufacturers for the Laptop Industry. LCD screens have different resolutions, size and type and these screens are compatible as long as the resolution and connections are the same.

For this listing, we will ship you a brand new OEM Compatible LCD screen manufactured either by Samsung, LG, Chi Mei, Chunghwa, Sharp, or AUOptronics. For more information about each LCD manufacture please click here.

If you wish to know the make of the actual LCD that will be shipped to you, please contact us by phone with your order information between 10AM - 8PM EST (Monday – Friday).

laptop screen connectors are in the form of wholesale laptop screen connectors. Sellers can find a variety of laptop screen connectors, in the form of wholesale laptop screen connectors.

In the form of a laptop screen connector, light laptops are needed as lightning are are needed. For such, a power laptop battery connector is important.

There are various types of laptop screen connector, laptop light connectors, and light connectors needed. For each type of laptop screen connector, light connectors are required.

laptop screen connectors are the right laptop connectors for any laptop. With it, a laptop screen connector or power jack can be found, it is important to choose the right laptop screen connectors and the right laptop for any purpose. As for laptops, it is important to choose the right laptop screen connector and power jack for each laptop.

Metal screen connectors are great for those who want to add wholesale graphics to their laptops. Wholesale laptop battery and cable connectors are a great way to advertise your business.

There are many benefits of using a laptop lcd cable pinout. First, this device is a cost-effective method of protection against the effects of a short-circuit. This is particularly true when there are strong fault currents or small components like Control Transformers or DC power supplies that need to be protected. Another advantage of a laptop lcd cable pinout is that it requires no maintenance. This is because fuses don"t need to be regularly reconfigured compared to other electromechanical protective equipment. These devices also don"t have any moving parts that can break down or become polluted by dust or oil. Lastly, fuses are durable, and they can serve you for a long time. Even as time goes by, their response time or ability to protect your electronic devices against short circuits will not reduce.

When it comes to buying a laptop lcd cable pinout, there are several factors that you need to consider, including current rating and breakage capacity. The current rating is helpful when it comes to determining nominal amperage. This refers to the maximum current that the fuse can handle under normal operating conditions. Breaking capacity is also another important consideration. This refers to the peak current that the fuse can securely break at the specified voltage. When choosing a fuse, make sure the fuse"s breaking capacity is enough for the circuit. A fuse whose interrupting rating is equal to or greater than the short circuit"s current is ideal.

For a wholesale laptop lcd cable pinout, visit Alibaba.com. This online shopping platform has partnered with various Chinese wholesalers to offer you a wide range of fuses. Therefore, you can be sure to find one that suits your needs and budget. Visit the website at any time and place your order with a few clicks.

My wife contacted me, from the other side of the planet, to tell me that her laptop was having trouble. The screen would only work when the laptop was partially open. I told her that I could probably fix it when she got back home.

This is a common problem in laptops. The cable that connects the screen to the base runs thru the hinge. The opening and closing bends the cable and, after time, this bending and unbending of the cable damages the wires inside the cable causing shorts. Sometimes you can use the laptop in a certain position but other times it will stop working all at once.

The cables are usually between 15 to 25 dollars on Amazon and can be found by searching your computer"s make and model number. In this case, it was a Toshiba Satellite S55-B5157. If you take your laptop to a computer store, they will charge around 100 dollars or more to fix it. If you can unscrew screws, pry off some plastic pieces, unplug a cable, plug back in a cable, snap on plastic pieces, and re-screw the screws back in, you can do this. It is not as intimidating as it may sound.

I only needed a small Phillips screwdriver and a small slotted screwdriver. If your laptop has specialty screws, you will need the proper screwdriver to fit them. The only reason I needed the slotted screwdriver was to pry some of the pieces apart to a point I could use my fingers to pry the rest. You will also want to wear safety glasses, sometimes small pieces of plastic could go flying when you are prying off pieces.

Working with electronics, it is important that you remove, or at least disconnect, the battery. If you skip this, you could damage not only your laptop, but possibly damage yourself. This laptop had three screws securing it in.

There were four screws holding the screen to the top of the laptop. After removing those screws, I carefully placed the screed on the keyboard of the laptop. The cable was secured with tape that has to be pulled back to be able to unplug the cable. Look closely at the cable and use the new cable to determine which way you need to pull the cable to unplug it. One end of my cable had to be pulled horizontally and the other end had to be pulled vertically.

Route the new cable just like the old cable. There are other cables that could be damaged if you go over instead under. There are also little channels in the laptop that hold the cable in place to protect it. Plug the cable into the bottom part of the laptop first.

After getting all the covers and screws put back, reconnect the battery and turn on the laptop. If all is well you are good to go. If the screen does not work, take the covers off and double check that the ends of the cable are plugged in properly. If the laptop screen still does not work, you may have to take it to a computer repair shop.

As Usual, I made a video. Some laptops are similar but some are completely different so you may want to search the internet and see if someone has posted a video of replacing the screen cable on your model of laptop.

My laptop screen works but the touchscreen capability is gone and undetected by my laptop, post a power port replacement. Is there a specific cabling connection dedicated to the touchscreen function? If it is a separate cable or connector, maybe pressing it together might restore the touchscreen? What physical component could fail and take out just the touchscreen function? The touchscreen is not even detected in BIOS. This is a 15-0073wm with touchscreen capablity normally. The drivers don"t show up and system info says it does not have pen or touch input.0

I found the model number, on the bottom of my laptop, and then Google searched that model number followed by screen cable. The first thing that came up was an Amazon listing of the cable for my laptop. Good luck.0

I had to take 3 laptops apart last week. Aside from sourcing replacement parts, I think releasing the plastic case tabs without breaking them is the hardest part of a laptop repair. I use the corner of an old credit card to pop them. A disassembly guide helps to find those hidden screws while not removing any you don"t need to, and a reminder of where everything goes when you put it back together.

Sorry It took so long to reply. I somehow missed your comment. I wasn"t wearing a ground strap, but I was bare footed. It is kind of intimidating prying up on something as expensive as a laptop looking for fasteners. My wife was very happy to have her laptop fixed.Post Comment

15.6” slim 1920×1080 FHD 30 pins (eDP) LED LCD Screen Glossy/Matte – LTN156HL07-401 LP156WF6-SPA1 NV156FHM-N42 B156HAN04.1 Top/Bottom Screw 04 Mount, Bottom Right Connector for Laptop/Notebook

***Disclaimer : In the presenting here, all brands, trademarks and registered trademarks, logo, icons, information, data, articles, images, colors, links etc. are the property of their respective holders , we are only initiating to accumulate them in our website for more dynamically re-presentation to introduce the peripherals of Laptop, MacBook & iMac in a platform on the demand of our clients.

Screen Replacement for MacBook Pro A2338 M1 2020 EMC3578 MYD83LL/A MYD92LL/A 13.3" 2880x1800 LCD Display Screen Complete Topfull Assembly w/Cover(Space Gray)Part Number: EMC3578

Screen Replacement for HP Envy X360 15M-DS 15M-DS0011DX 15M-DS0012D 15M-DS0023DX L53868-001 15.6" FHD LCD Display Touch Screen Digitizer Assembly w/ Touch Control Board + BezelPart Number: L53868-001

Screen Replacement for MacBook Air A2337 M1 2020 EMC3598 13.3" 2560x1600 LCD Display Screen Complete Topfull Assembly w/Cover(Rose Gold)Part Number: EMC3598

Screen Replacement for MacBook Air A1466 2017 EMC3178 MQD32LL MQD42LL Z0UU1LL 13.3" LED LCD Display Screen Complete Top Full Assembly w/CoverPart Number: 661-7475 ,661-02397

Screen Replacement for MacBook Pro A1706 A1708 Late 2016 Mid 2017 661-07970 661-05323 13.3" LED LCD Display Screen Complete Top Full Assembly w/Cover (Space Gray)Part Number: 661-07970 661-05323

Screen Replacement for MacBook Pro A2338 M1 2020 EMC3578 MYDA2LL/A MYDC2LL/A 13.3" 2880x1800 LCD Display Screen Complete Topfull Assembly w/Cover(Space Gray)Part Number: EMC3578

Screen Replacement for MacBook Pro A1708 Late 2016 Mid 2017 EMC2978 EMC3164 13.3" LED LCD Display Screen Complete Top Full Assembly w/Cover(Space Gray)Part Number: 661-07970 661-05323 661-05095 661-05096

Screen Replacement for HP Pavilion 15-EG 15-EG0050WM 15-EG0070WM 15-EG0069NR 15-EG0072NR 15-EG0079NR 15-EG0056NR 15-EG0074NR M16342-001 LED LCD Display Touch Screen 15.6" 1920x1080Part Number: M16342-001

Screen Replacement for MacBook Air A1932 2018 EMC3184 MRE82LL/A 13.3" Retina LCD Display Screen Complete Top Full Assembly w/Cover(Space Gray)Part Number: EMC3184

Screen Replacement for HP Notebook 15-EF 15-EF0023DX 15-EF0005CA L78717-001 15.6" HD LED LCD Display Touch Screen Digitizer Assembly (No Bezel)Part Number: L78717-001

Screen Replacement for HP ENVY X360 15M-EE 15-EE 15M-EE0013DX 15M-EE0023DX 15-EE1010NR L93181-001 15.6” 1920x1080 LED LCD Display Touch Screen w/Black BezelPart Number: L93181-001