anti-glare led-backlit lcd panel brands

Shopping for a new TV sounds like it could be fun and exciting — the prospect of a gleaming new panel adorning your living room wall is enough to give you goosebumps. But with all the brands to choose from, and different smart capabilities (we can explain what a smart TV is) to weigh, as well as the latest picture tech to consider, it can be daunting. Is this article, we compare OLED vs. LED technology to see which is better for today’s modern TVs. Once you determine which panel type is best for you, make sure you check out our list of the best TVs to get our editor’s recommendations.

Non-OLED TVs are made of two main parts: An LCD panel and a backlight. The LCD panel contains the pixels, the little colored dots that make up a TV’s image. On their own, pixels cannot be seen; they require a backlight. When light from the backlight shines through an LCD pixel, you can see its color.

The “LED” in LED TV simply refers to how the backlight is made. In the past, a thicker and less-efficient technology called CCFL (cold-cathode fluorescent light) was used. But these days, virtually every flat-screen TV uses LEDs as its source of backlighting. Thus, when you see the term “LED TV,” it simply refers to an LED-backlit LCD TV.

Currently, LG Display is the only manufacturer of OLED panels for TVs, famed for top-line models like the CX. Sony and LG have an agreement that allows Sony to put LG OLED panels into Sony televisions — like the bright X95OH — but otherwise, you won’t find OLED in many other TV displays sold in the U.S.

The differences in performance between LG’s OLED TVs and Sony’s result from different picture processors at work. Sony and LG have impressive processors that are also unique to each brand, which is why two TVs with the same panel can look drastically different. A good processor can greatly reduce issues like banding and artifacting and produce more accurate colors as well.

Other brands that source panels from LG include Philips, Panasonic, HiSense, Bang & Olufsen, and more. You’ll also see lesser-known brands sparingly, but for now, they’re all getting their panels from the same source.

Samsung does make OLED smartphone panels, and the company recently announced it would start building new TV panels based on a hybrid of QLED and OLED known as QD-OLED, but it will be a few more years before we see the first TVs that use this technology.

Despite the name, microLED has more in common with OLED than LED. Created and championed by Samsung, this technology creates super-tiny, modular LED panels that combine light emission and color like OLED screens do, minus the “organic” part. For now, the technology is primarily being used for extra-large wall TVs, where colors, blacks, and off-angle viewing are excellent but with more potential for greater brightness and durability than OLED TVs.

LED TVs rely on LED backlights shining behind an LCD panel. Even with advanced dimming technology, which selectively dims LEDs that don’t need to be on at full blast, LED TVs have historically struggled to produce dark blacks and can suffer from an effect called “light bleed,” where lighter sections of the screen create a haze or bloom in adjacent darker areas.

Because OLED pixels combine the light source and the color in a single diode, they can change states incredibly fast. By contrast, LED TVs use LEDs to produce brightness and tiny LCD “shutters” to create color. While the LED’s brightness can be changed in an instant, LCD shutters are by their nature slower to respond to state changes.

OLED, again, is the winner here. With LED TVs, the best viewing angle is dead center, and the picture quality diminishes in both color and contrast the further you move to either side. While the severity differs between models, it’s always noticeable. For its LED TVs, LG uses a type of LCD panel known as IPS, which has slightly better off-angle performance than VA-type LCD panels (which Sony uses), but it suffers in the black-level department in contrast to rival VA panels, and it’s no competition for OLED. Samsung’s priciest QLED TVs feature updated panel design and anti-reflective coating, which make off-angle viewing much less of an issue. While OLED still beats these models out in the end, the gap is closing quickly.

OLEDs have come a long way in this category. When the tech was still nascent, OLED screens were often dwarfed by LED/LCD displays. As OLED manufacturing has improved, the number of respectably large OLED displays has increased — now pushing 88 inches — but they’re still dwarfed by the largest LED TVs, which can easily hit 100 inches in size, and with new technologies, well beyond.

Can one kind of TV be healthier for you than another? If you believe that we need to be careful about our exposure to blue light, especially toward the evening, then the answer could be yes. Both OLED and LED TVs produce blue light, but OLED TVs produce considerably less of it. LG claims its OLED panels only generate 34% blue light versus LED TV’s 64%. That stat has been independently verified, and LG’s OLED panels have been given an Eye Comfort Display certification by TUV Rheinland, a standards organization based out of Germany.

OLED panels require no backlight, and each individual pixel is extremely energy-efficient. LED TVs need a backlight to produce brightness. Since LEDs are less energy-efficient than OLEDs, and their light must pass through the LCD shutters before it reaches your eyes, these panels must consume more power for the same level of brightness.

An LED-backlit LCD is a liquid-crystal display that uses LEDs for backlighting instead of traditional cold cathode fluorescent (CCFL) backlighting.TFT LCD (thin-film-transistor liquid-crystal display) technologies as CCFL-backlit LCDs, but offer a variety of advantages over them.

While not an LED display, a television using such a combination of an LED backlight with an LCD panel is advertised as an LED TV by some manufacturers and suppliers.

A 2016 study by the University of California (Berkeley) suggests that the subjectively perceived visual enhancement with common contrast source material levels off at about 60 LCD local dimming zones.

LED-backlit LCDs are not self-illuminating (unlike pure-LED systems). There are several methods of backlighting an LCD panel using LEDs, including the use of either white or RGB (Red, Green, and Blue) LED arrays behind the panel and edge-LED lighting (which uses white LEDs around the inside frame of the TV and a light-diffusion panel to spread the light evenly behind the LCD panel). Variations in LED backlighting offer different benefits. The first commercial full-array LED-backlit LCD TV was the Sony Qualia 005 (introduced in 2004), which used RGB LED arrays to produce a color gamut about twice that of a conventional CCFL LCD television. This was possible because red, green and blue LEDs have sharp spectral peaks which (combined with the LCD panel filters) result in significantly less bleed-through to adjacent color channels. Unwanted bleed-through channels do not "whiten" the desired color as much, resulting in a larger gamut. RGB LED technology continues to be used on Sony BRAVIA LCD models. LED backlighting using white LEDs produces a broader spectrum source feeding the individual LCD panel filters (similar to CCFL sources), resulting in a more limited display gamut than RGB LEDs at lower cost.

A first dynamic "local dimming" LED backlight was public demonstrated by BrightSide Technologies in 2003,Sony in September 2008 on the 40-inch (1,000 mm) BRAVIA KLV-40ZX1M (known as the ZX1 in Europe). Edge-LED lighting for LCDs allows thinner housing; the Sony BRAVIA KLV-40ZX1M is 1 cm thick, and others are also extremely thin.

LED-backlit LCDs have longer life and better energy efficiency than plasma and CCFL LCD TVs.mercury, an environmental pollutant, in their manufacture. However, other elements (such as gallium and arsenic) are used in the manufacture of the LED emitters; there is debate over whether they are a better long-term solution to the problem of screen disposal.

Quantum dots are photoluminescent; they are useful in displays because they emit light in specific, narrow normal distributions of wavelengths. To generate white light best suited as an LCD backlight, parts of the light of a blue-emitting LED are transformed by quantum dots into small-bandwidth green and red light such that the combined white light allows a nearly ideal color gamut to be generated by the RGB color filters of the LCD panel. In addition, efficiency is improved, as intermediate colors are no longer present and do not have to be filtered out by the color filters of the LCD screen. This can result in a display that more accurately renders colors in the visible spectrum. Companies developing quantum dot solutions for displays include Nanosys, 3M as a licensee of Nanosys, QD Vision of Lexington, Massachusetts, US and Avantama of Switzerland.Consumer Electronics Show 2015.quantum dot displays at CES 2017 and later formed the "QLED Alliance" with Hisense and TCL to market the technology.

Mini LED displays are LED-backlit LCDs with mini-LED–based backlighting supporting over a thousand full array local dimming (FALD) zones, providing deeper blacks and a higher contrast ratio.

Novitsky, Tom; Abbott, Bill (12 November 2007). "Driving LEDs versus CCFLs for LCD backlighting". EE Times. Archived from the original on 28 November 2010. Retrieved 21 November 2020.

LCD Television Power Draw Trends from 2003 to 2015; B. Urban and K. Roth; Fraunhofer USA Center for Sustainable Energy Systems; Final Report to the Consumer Technology Association; May 2017; http://www.cta.tech/cta/media/policyImages/policyPDFs/Fraunhofer-LCD-TV-Power-Draw-Trends-FINAL.pdf Archived 1 August 2017 at the Wayback Machine

Many TVs use LCD (Liquid Crystal Display) panels that are lit by LED backlights. There are two popular types of LCD panels: In-Plane Switching (IPS) and Vertical Alignment (VA), and there are two main differences between each type. A VA panel usually has a high contrast ratio and narrow viewing angles. However, an IPS panel has low contrast and wide viewing angles. These are the main differences between each, and for the most part, panel type doesn"t affect other aspects of picture quality, like peak brightness, color gamut, or color accuracy.

For the purposes of this article, we"re going to compare two LED-backlit LCD TVs: the Sony X800H, which has an IPS panel, and the Hisense H9G, which has a VA panel. Due to their different panel types, there are three noticeable differences in picture quality: viewing angles, contrast, and black uniformity, so we"re going to look at each one.

Viewing angle refers to the angle at which you can watch the TV without seeing a noticeable drop in picture quality. IPS TVs are the clear winner here, as the image remains accurate when viewing from the side - you can see the differences in the videos above. This is their main advantage over VA panels. Most VA panel TVs have a noticeable loss in image accuracy when viewing from the side. The narrow viewing angle of VA-type TVs is also problematic when the TV is used as a PC monitor from up close since the edges of the display look washed out.

VA panels are far superior to IPS panels when it comes to this, so if you tend to watch movies in the dark, you likely want to get a TV with a VA panel. Most TVs use VA panels due to this main advantage, and high-end models may have a local dimming feature that further enhances black levels. On the other hand, IPS panels normally have low contrast, so blacks look closer to gray, but you may not notice the difference in contrast in bright environments.

Our black uniformity tests determine how well a TV displays a dark scene with a bright image in the center. Ideally, you want to see a completely black screen with the center cross being the only part that"s lit up, and this is important for people watching movies. No LED TV has perfect uniformity, and unlike viewing angles and contrast, the panel type doesn"t completely determine its black uniformity. However, most VA panels that we"ve tested have good black uniformity, while most IPS panels have sub-par black uniformity. This doesn"t mean that every VA panel TV has good uniformity, as this can change between units, and you can also improve uniformity using the local dimming feature.

LCDs function by having liquid crystals in little groups to form the pixels. These crystals react and change position when charged with electricity and, depending on their position, they allow a certain color of light to pass through.

There"s also another type of IPS panel, called Plane-to-Line Switching (PLS), which can be seen with the Sony X800H. This panel type was designed by Samsung and technically performs the same as an IPS panel. When you compare the pixels visually, IPS panels look like chevrons, VA looks like very straight rectangles, and PLS looks like round-edged capsules. You can learn more about pixels here.

The way the pixels are laid out can also affect text clarity. Many IPS panels, like the ones on the Sony X800H or the LG SK9000, use RGB sub-pixel layouts, while many VA panels have a BGR layout, like on the Hisense H9G. The sub-pixel layout doesn"t directly affect picture quality unless you"re using it as a PC monitor. Some applications may expect an RGB layout, so if you have a BGR sub-pixel layout, text may not look clear. You may need to increase the text scaling to read it properly, but this issue isn"t common with an RGB layout. You can learn more about it here.

Unlike LED TVs, OLEDs don"t use a backlight and instead have self-emitting pixels. This allows the pixels to individually turn on and off, resulting in perfect blacks. This means that they also have perfect black uniformity as there"s no blooming around bright objects like on some LED TVs. They also have wide viewing angles, sometimes even wider than some IPS panels, so OLEDs are a good choice for wide seating arrangements.

Samsung released quantum dot TVs in 2015, which they later labeled as QLED in 2017. These TVs include a quantum dot layer between the LED backlights and the LCD panel to achieve a wider color gamut. Other companies like Vizio and TCL also use this quantum dot technology on their TVs. Adding this extra quantum dot layer doesn"t change the characteristics of the panel type; the VA panel on the TCL 6 Series/S635 2020 QLED still has a high contrast ratio and narrow viewing angles. Although most QLED TVs use VA panels, you can easily use an IPS panel as well.

Manufacturers have tried different techniques to improve the viewing angles on VA panels over the years, aiming to produce a perfect LCD panel with both wide viewing angles and high contrast. While they have yet to achieve that goal, a few TVs have hit the market that try to combine the best of both panel types. The first TVs with this viewing angle technology came out in 2018, and only a few high-end models like the Samsung Q90/Q90T QLED and the Sony X950H had this technology in 2020. These TVs are a bit unique, delivering noticeably better viewing angles than their pure VA counterparts, but still worse than true IPS panels. This comes at the expense of a lower contrast ratio, as these TVs have worse native contrast than most VA panels, but they"re still better than IPS panels. Combined with their local dimming features, they still produce deep blacks.

Between IPS and VA panels, neither technology is inherently superior to the other as they both serve different purposes. In general, IPS TVs have wide viewing angles suitable for when you want to watch the big game or your favorite show in a large seating arrangement. They"re also beneficial for use as a PC monitor since the edges remain accurate if you sit up close. However, VA panels are a better choice for watching content in dark rooms, as their improved contrast allows them to display deep blacks. Choosing between the two is a series of trade-offs and qualities, so choosing the best TV for your needs depends on your usage.

[insert your own dilithium joke here]. Rather "the molecules move in response to electrical fields, and are used as a shutter to block the light." I was surprised how inefficient the technology is. An LCD screen blocks 95% of the backlight, even when it"s showing a full white screen.

Traditionally, Alfred said, the backlight source behind the crystals have been cold-cathode fluorescent lamps (CCFL). The use of LEDs in laptop screens is relatively new. According to Alfred, LEDs "already are commonplace in mobile devices such as GPS receivers, cell phones, and PDAs ... the first desktop monitors probably appeared within the past couple of years. Sony had an LCD TV with LED backlights a couple of years ago. I expect that laptops were the last to get the technology."

I couldn"t find anything from Sony, Toshiba or Apple about the number of LEDs in their screens. But in describing the M1330 Dell says "Our optional LED display uses 32 tiny, white LEDs ..." According to Alfred, "32 is a relatively high number for a small screen. Some large HDTV panels using high brightness LEDs could use that count or less for a panel with 8 or 10 times the surface area."

So, if the relatively high number of LEDs means increased heat and no power savings, why does Dell use so many? Alfred explains that LED screens "need a sophisticated lightpipe and diffuser to spread the light evenly behind the LCD panel. The fewer LEDs you use, the more difficult the diffusion process becomes."

The owners manual for the Dell M1330 shows the LED panel to be 36% brighter than the CCFL panel. Specifically the luminance of the LED screen is 300 cd/m² vs. 220 cd/m² for CCFL (and no, I can"t explain what cd/m² means).

A glossy screen suffers from glare, but produces more vibrant colors. Each laptop vendor has their own marketing term for glossy screens, Apple is the only company I"ve seen that actually uses the word glossy. A matte finish may be described as anti-glare or anti-reflective.

Alfred estimates the market share of LEDs at less than five percent, but he expects them to become more common as costs come down. DigiTimes reports that laptop and panel vendors expect that LEDs will be used in about 7% of laptop screens next year (See Nearly 100% of 10-inch-and-smaller LCD panels using LED backlight by Susie Pan and Emily Chuang, July 23, 2007). They estimate that LEDs will be used in 3-5% of laptop computers this year.

To date, LEDs have been popular mostly in smaller displays. In part this is because smaller screens use fewer LEDs which lowers the price differential over CCFL. The DigiTimes article reports that most LCD screens 10 inches and under use LED backlighting. The Sony TX and TZ screens are 11.1 inches, the Toshiba R500 screen is 12.1 inches and the Dell M1330 LED screen is 13.3 inches. The Apple Macbook Pro has the only available 15 inch screen using LEDs, but Apple appears to be having supply problems with them.