snmp-1000 lcd module free sample

The SNMP-1000-B is a platform independent system management module that can detect system operating conditions and notify users to take necessary action to avert system failure through multiple communication protocols. With the SNMP-1000-B installed, system monitoring and management can be integrated into an existing SNMP-based network management environment. The SNMP-1000-B also has a built-in web-based administration interface which allows users to monitor system operation from any place with Internet connectivity. The SNMP-1000-B adds another dimension of reliability to your most critical applicat

The SNMP-1000 is a platform independent system management module that can detect system operating conditions and notify users to take necessary action to avert system failure

through multiple communication protocols. With the SNMP-1000 installed, a system monitoring and management can be integrated into a user’s existing SNMP-based network

management environment. The SNMP-1000 also has a built-in Web-based administration interface which allows users to monitor the system operation from any place with Internet

The SNMP-1000 can detect a wide variety of internal system conditions, including temperature, voltage, fan rotation, power supply or CPU operations such as watchdog timer output.

different alarm outputs, including SNMP trap, e-mail, pager, acoustic signal, system reset, digital output, or LCD message (requires the SNMP-1000-LCD module). Through the easy

The on-board 10/100 Mbps Fast Ethernet interface enables the SNMP-1000 to be connected to your existing network, independent from the system’s connection. It supports multiple

You can upgrade the firmware on-line by using the included setup utility. There is no need to go to a remote site and disassemble the chassis to collect each SNMP-1000 module or

card for firmware upgrade. The setup utility also supports “batch setup” function, which allows you to save a configuration and duplicate it to many other SNMP-1000 modules and

The modular design of the SNMP-1000 allows it to be easily customized to fit into any system. The ultra compact module is only 41 mm wide and 94 mm long. It can be mounted

on standard or customized carrier boards to plug into any standard PCI/ISA slot. It also can be installed on the specially designed LCD Message Display module (SNMP-1000-LCD)

mod_num(Optional) Number of the module for which CDP information is displayed. If no module number is specified, CDP information for the entire switch is displayed.

Use theshow fddi command to display the settings for the Fiber Distributed Data Interface (FDDI) and Copper Distributed Data Interface (CDDI) modules.

The Network Management Processor (NMP) only applies to module 1; therefore, only the display for module 1 includes the NMP status. If other modules are specified, the NMP status is not displayed.

Optional. This tells the plugin how to connect to the database. The only method implemented yet is “dbi” which is the default. (It means, the plugin uses the perl module DBD::DB2).

This subcommand is provided by the director module > 1.4.2 and executed as icingacli director health check. Please refer to the documentation for all available sub-checks.