gopro hero 5 lcd screen factory

It may be either a loose connection to the LCD screen, that the LCD screen is faulty and needs to be replaced or worst case that there is a fault on the motherboard.

Try shining a torch at an angle close to the LCD screen to check if you can detect an image at all when using the camera. It will be very faint so try it in a darkened room if possible.

If you can detect an image it means that there is a backlight problem with the screen. Either there is no power being supplied from the motherboard to the backlight circuit in the LCD screen or the backlight circuit in the screen is faulty and the screen will have to be replaced as it cannot be repaired. Hopefully it is not a motherboard problem in supplying backlight power to the screen.

If you cannot detect an image (or even if you can) then unfortunately without a schematic, the only way to determine if it is a problem with the screen or the motherboard is to replace one or the other. Again hopefully it is not a motherboard problem.

Here’s a link to a video that shows how to replace the LCD screen + digitizer in the camera. This will also help you to check if the LCD video flex cable connection is OK.

Here’s a link to the GoPro Hero5 Black Repair guides which may also help if the video isn’t clear enough at some points. Unfortunately there is no ifixit guide showing the LCD screen removal.

Press back mode once, then 5 times, for wireless connection, Press Shutter once, will say conn new device, press shutter once. be on gopro app, press back mode once, change from app to Check, press shutter once and it is PAIRING ( you have 3 minutes, to set up your App via the smartphone and that is it.

GoPro, Inc.GoPro and sometimes stylized as GoPRO) is an American technology company founded in 2002 by Nick Woodman. It manufactures action cameras and develops its own mobile apps and video-editing software. Founded as Woodman Labs, Inc, the company eventually focused on the connected sports genre, developing its line of action cameras and, later, video editing software. It is based in San Mateo, California.

After growing the number of employees by more than 500 in 2015, the company responded to weak sales in the fourth quarter by cutting about 7% of its workforce (100 workers) in January 2016.

On May 19, 2014, GoPro filed its Form S-1 with the SEC without specifying the number of shares or their price. The company stated that they hoped to raise at least $100 million through the sale of shares, using the money to pay off debt in full ($111 million as of March 31, 2014) and "to acquire or invest in complementary businesses, technologies or assets". They said that they planned to list on the NASDAQ stock exchange using the symbol "GPRO."

The expected price range was $21 to $24 a share; on June 25, 2014, GoPro sold 17.8 million shares to initial investors at $24 per share (totaling $427.2M).

One reason for GoPro"s decision to go public was the potential to become a media company to generate additional revenue from the content its cameras create.

Woodman worked on his first camera for two years after founding the company, eventually introducing the GoPro 35mm HERO in September 2004 at San Diego"s Action Sports Retailer trade show.

In 2014, the company was selling the HERO3+ in editions of different colors. It was capable of filming in 16:9 aspect ratio, supporting 4K UHD video and 12 MP still photographs.

On September 28, 2017, GoPro released the HERO6 Black, which claims improved stabilization over the HERO5 models and is capable of capturing 4K video in 60 FPS.

On September 20, 2018, GoPro came out with the HERO7 Black, which apart from providing improved stabilization over HERO6 models with HyperSmooth, also featured the new form of video capturing, "TimeWarp", providing a high speed effect to the videos. HERO7 also came out with capability to stream live across multiple platforms like Facebook and YouTube .

On October 15, 2019 GoPro released the Hero8 Black, which included improved in-camera stabilization by way of Hypersmooth 2.0. The Hero8 Black introduced integrated mounting "fingers" which could be folded down for use, and was also notable for not having an easily replaceable lens available from GoPro, though a third party replacement lens kit is available from a company called Camera Butter.

In 2014, GoPro entered into discussions with DJI for a private label model built with the GoPro branding. After the failure of these negotiations, GoPro entered into an agreement with 3D Robotics (3DR) for a similar partnership based on 3DR"s flight controllers. 3DR failed to meet their agreed-upon timelines. As a result, GoPro took full control of the development process in mid-2015.

Scheduled to be released early 2016, the GoPro Karma project was delayed several times before the GoPro Karma was announced with an introduction date of October 23, 2016. The Karma was released along with newer models of the HERO5 and Session cameras and features a removable handheld stabilizer (gimbal) integrated into the design. After a few customers complained about power failure during operation, GoPro recalled Karma drones and gave customers full refunds.

In November 2017, GoPro launched the Fusion camera,omnidirectional camera which is capable of recording 360-degree footage. The Fusion was the first GoPro to feature an increased maximum resolution of 5.8K.

GoPro produces various mounting accessories for its cameras including a 3-way mount, suction cup, chest harness, jaws-type flexible clamp, dog harness, surfing mount, etc.

In April 2014, GoPro was listed by Adweek as one of the "Top 10 Best Brand Channels on YouTube" based on a combination of views, shares, comments and overall engagement.

As part of its transformation to a media company in 2014, GoPro created additional channels with GoPro content on YouTube, Virgin America, and Xbox Live.PlayStation Network in 2015.

The 35mm camera (model #001) became available on April 13, 2005. It had dimensions of 2.5 by 3 inches (64 by 76 mm) and weighed 0.45 pounds (200 g). It included the camera, a clear case with quick release, a camera strap and ski glove adapter lash. It could pivot "on the fly" and be functional to a depth in water of about 15 feet (5 m). It was described as a "reusable wrist camera" and included a roll of 24 exposure Kodak 400 film.

The first generation of Digital HERO cameras (2006–09) were powered by conventional AAA batteries and included a rugged housing and wrist strap. Models were distinguished by their still image resolution and shot video in standard definition (480 lines or lower) with a 4:3 aspect ratio. Like the film camera HERO, the first-generation Digital HERO cameras were equipped with an optical viewfinder.

The original Digital HERO (DH1; 640×480 still resolution, 240p video in 10-second clips) of 2006 was succeeded by the Digital HERO3 (DH3; 3-megapixel stills, 384p video) and Digital HERO5 (DH5; same as DH3 but with 5-megapixel stills). All three of these had a 54° angle of view. A variant of the DH5 was released with an extreme wide-angle lens with 170° of angular coverage on the diagonal as the Wide HERO; the Wide HERO had a different housing than the other first-gen cameras (DH1/DH3/DH5) to accommodate its larger lens.

The Digital HERO released in 2006 (Model: SQ907 mini-cam) had a 640×480 camera and shot QVGA definition 320X240 (10 fps) video for a maximum of 10 seconds. The Digital HERO1 had 32 MB internal memory without SD slot.

The Digital HERO5 was first introduced in 2008. It had a 5 megapixel still photo sensor and supported standard definition (512×384) video capture. It ran on two AAA batteries, had 16 MB of internal memory and could function with a 2 GB SD card. Its housing was rated to 100 ft/30 meters depth. Its dimensions were 2.6 × 1.75 × 1.25 inches (66 × 44 × 32 mm).

The GoPro Wide HERO was the first model with a 170° wide-angle lens. It was released in 2008 alongside the Digital HERO5 and had the same 5MP sensor (2592 x 1944), capable of 512x384 at 30fps video with sound recording (up to 56 min. on a 2GB SD card), 5MP Photos, 10s Self Timer, 3X sequence still photo burst and Auto "Photo every 2 or 5 seconds" mode. It was powered by 2 x AAA batteries (not included in the box).

The second generation of the HERO cameras (2010–11) were branded HD HERO for their upgraded resolution, now offering up to 1080p high-definition video. With the HD HERO generation, GoPro dropped the optical viewfinder.

The basic HD HERO was marketed either with a basic set of accessories (case and mount) as the "Naked", or in bundles with additional accessories named for the intended purpose (such as the HD Helmet HERO, HD Motorsports HERO, and HD Surf HERO).

The HD HERO also offered an expansion port on the camera"s rear panel, branded the HERO Bus. Optional accessories included the LCD Bakpac, which offered a small monitor that displayed and played back video, and the Battery Bakpac, which doubled the battery life of the camera.

All three versions of the HERO3 come in a 30% smaller and 25% lighter package, with WiFi built in. The change of the physical dimensions of the cameras compared to the previous generations (HD HERO and HD HERO2 were physically identical) means that some accessories for HD HERO Original and HERO2 are not compatible with HERO3, so GoPro made new versions of those accessories specifically for HERO3, which mostly also were compatible with HERO3+, see below. Those new versions of accessories are usually not compatible with older Hero camera generations. However, a lot of other accessories are compatible with all HD Hero camera generations.

The Black EditionWVGA at 240 fps.BSI sensor included in a GoPro. The Black edition also includes the WiFi Remote. The Black Edition cannot record at 25/30 fps in 720p and WVGA resolutions; it can only record at very fast frame rates in those resolutions. This is a deliberate firmware limitation, as the manufacturer does not expect that this high-end camera model will be used at these lower resolutions and frame rates.

A timelapse recording one frame every 10 seconds with a GoPro HERO3 camera mounted on a bicycle helmet during a bike ride in Chicago. Note how the wide angle lens allows for the rider to capture wide images.

The HERO3+ camera models claim dramatically improved low light performance and have a waterproof enclosure which is 20% lighter and 15% smaller than the HERO3"s, according to the GoPro website. The HERO3+ camera housing is 20% smaller than the HERO3. The cameras are claimed to have improved image sharpness (close focus down to 7" vs about 3 ft on the HERO3, at the expense of distant focus which is slightly less sharp

The HERO4 Black Edition still has a 12 megapixel (MP) CMOS and a f/2.8 fixed maximum aperture and focus free. It adds Bluetooth connectivity, Highlight tag, Protune Available for photo and a new processor claimed by GoPro to be twice as fast as that of the HERO3+ Black Edition, doubling the frame rates in most resolutions. The HERO4 Black Edition can record 4K UHD video (3840×2160) at a frame rate of 24, 25 and 30 fps.Wi-Fi disabled at 4K/30, GoPro claims the HERO4 Black Edition battery life to be 65 minutes, increasing to a maximum of 1h 50" at 720p/240.

The HERO4 Silver Edition is basically a HERO3 Black Edition with the addition of a micro speaker,touchscreen display, Protune for photo and highlight tag (the first GoPro with this), a lower clocked Cortex-A9 and missing the Black Edition"s integrated analog-to-digital converter which supports a wider variety of professional low-sensitivity external microphones.4K video (3840×2160), but it supports Wi-Fi, Bluetooth and contains the sameAmbarella Inc. A9system on a chip (SoC) as in the HERO4 Black.

The HERO4 models maintain the H.264 video codec of previous versions and MP4 file formats. GoPro claims the mono microphone in both the Black and Silver Editions has twice the dynamic range of that in the HERO3+, and that the HERO4 Black and Silver Editions have improved low-light performance.

In September 2014, GoPro released an entry level camera named simply "HERO", priced at $130, alongside the HERO4 Black and HERO4 Silver. It is built into a waterproof housing, unlike the HERO4 line.

The GoPro HERO (2014) can capture 5mp still images and has a 5fps burst option. It is able to record 1080P at 30 or 25fps and 720P at 60 or 50fps on to a MicroSD card up to 32GB. It has an LCD non touch display on the front and is waterproof down to 40m.

In June 2015, the company started to sell the GoPro HERO+LCD, which provides video recording at 1080p at 60 fps and 8 megapixel photos. The HERO+LCD is also built into a waterproof housing.

The HERO6 Black was introduced on September 28, 2017.HEVC video recording at up to 60 fps and 1080p at up to 240 fps, automatic upload of footage to cloud, voice controls and 5 GHz Wi-Fi. It was the first GoPro sporting GoPro"s custom system on a chip (SoC) the GP1.

The HERO7 White, HERO7 Silver and HERO7 Black were announced and released in September 2018, as the seventh-generation action camera series from GoPro.

The HERO7 White was intended as the entry-level camera, featuring only 1440p resolutions for video and time-lapse video functions and a lack of WDR or HDR in its photos. The HERO7 Silver was intended as the mid-range camera, featuring 4K resolutions for video and time-lapse video resolutions and WDR in its photo mode. Initially, both the HERO7 White and Silver defaulted to a video resolution of 1440p with 1080p only available by cropping.

By contrast, the HERO7 Black was introduced at the high-end level and primarily encompasses the features of the HERO6 Black with major improvements. The HERO7 Black introduced a heavily improved electronic image stabilisation known as "HyperSmooth" video stabilization, which GoPro has advertised heavily as "Gimbal-Like", as its primary improvement.

During its release, the HERO7 Black largely competed with rival camera and camera accessory manufacturer DJI which released the DJI OSMO Action, which also introduced a similar enhanced stabilization feature.

On February 28, 2019, GoPro released HERO7 Black in a new "dusk white" color. This is a limited edition and it has the same specs as in regular version and differs just in color.

The HERO8 Black essentially contained the former features of the HERO7 Black, however improved on certain functions. Most notably, the "HyperSmooth" feature introduced in the HERO7 Black was improved on and named "HyperSmooth 2.0", also resulting in an improvement of the TimeWarp feature introduced in the HERO7 Black. The HERO8 Black also improved the image quality, improving the HDR functions of the camera to allow HDR to assist the SuperPhoto function of the camera that automatically chooses what image processing to use such as high dynamic range (HDR). GoPro also reintroduced the field-of-view (FOV) functionality as, "Digital Lenses" which retains the original SuperView, Wide, Narrow, Linear FOV settings. Moreover, live-streaming now streams in 1080p instead of the HERO7 Black"s 720p and the RAW imaging functionality has now been expanded for all photo modes.

The HERO8 Black largely introduced several new functions into the camera. Physically, the HERO8 Black now incorporates the connecting prongs that are used to connect accessories, directly onto the camera. Originally, the cameras would only be able to access the prongs if the cameras utilised either the frames (for cameras HERO5 to HERO7) or the protective cases for HERO4 and before. Moreover, the GoPro logo moved under the LCD screen to make way for extra microphones. More additions to the camera most notably were part of the software aspects of the camera. These included an option to switch between various settings presets, including standard, activity, cinematic and action shots and adjusting on-screen shortcuts of the user interface. Most notably as part of software, was the introduction of the night-lapse video, which similar to the time-lapse video mode, automatically stitches the frames captured by the camera at set intervals, however with the addition of improved low-light performance.

The HERO8 Black also attempts to address vloggers who may wish to use the GoPro in such a manner. As such, GoPro has also introduced an external accessory known as the "Media Mod" which includes a USB Type-C port for supplying power to external microphones and accessories, a micro-HDMI port and a 3.5mm microphone port. Moreover, the accessory includes a mount to connect either external microphones, LEDs or an LCD screen.

The HERO9 Black essentially contained the former features of the HERO8 Black, however, improved on certain functions. Most notably, the "HyperSmooth" feature introduced in the HERO7 Black and refined in HERO8 Black was improved on and named "HyperSmooth 3.0". It also features a max resolution of 5K for video and 20M for photos and adds a front-facing 1.4-inch color "selfie" screen.

The HERO10 Black essentially contained the former features of the HERO9 Black, however, improved on certain functions. Most notably, the "HyperSmooth" feature introduced in the HERO7 Black and refined in HERO8 Black was improved on and named "HyperSmooth 4.0".

The major changes new GP2 processor, HERO10 Black shoots 5.3K video with double the frame rate, 23MP photos, enhanced low-light performance and HyperSmooth 4.0 video stabilization in all modes. On top of all that, HERO10 is cloud connected—so the moment you charge it, your footage is automatically uploaded to the cloud.

Karma Drone became available October 23, 2016. The drone is compatible with the HERO7 Black, HERO6 Black, HERO5 Black and HERO4 Black and Silver. The Drone has 20 minutes of battery life.

GoPro released the 3D HERO system in April 2011, which coupled two HD HERO cameras via a synchronization cable in a single housing to form a stereoscopic 3D camera. One of the cameras is used in upside-down mode.anaglyph to be viewed wearing red-cyan glasses.

In 2014, GoPro released an update as the Dual HERO system, which provides similar functionality using two HERO3+ Black edition cameras. The updated Dual HERO BacPac sync/link cable now has an asymmetric design: the right or primary camera (viewed with the lens facing away from the user) is larger than the left (secondary) camera, and the left camera is used in upside-down mode.

The Odyssey is a 16-camera panoramic stereo rig designed to produce content for the Google Jump virtual reality platform by synchronizing the cameras and automatically stitching their footage together.Google I/O in May 2015

The Fusion was announced alongside the HERO6 Black360° Panorama video. Fusion Studio can export to several formats, including H.264 (4K), CineForm 422, and Apple ProRes 422.

The GoPro GP1 is their own System-on-Chip with the main task of image processing. It replaces the earlier used Ambarella SoC"s and launched in the GoPro HERO6.Socionext.

The GP1 encodes video in the H.265 codec, also known as HEVC. The available resolutions are 4K60, 2.7K120 and 1080p240 unstabilized or 4K30, 2.7K60 and 1080p120 digitally stabilized.

"GoPro doesn"t like their HERO3 compared to Sony"s AS15?". DigitalRev.com. March 19, 2013. Archived from the original on March 17, 2015. Retrieved February 20, 2015.

"GoPro Hero 3 Black Edition: Seconda solo a se stessa". InsideHardware.it (in Italian). October 25, 2013. Archived from the original on September 24, 2015. Retrieved September 28, 2015.

"GoPro launches 3D HERO system; world"s smallest 1080p 3D Camera" (Press release). GoPro. April 4, 2011. Archived from the original on 12 November 2021. Retrieved 12 November 2021.

"Dual HERO System Workflow - Setup and Recording". GoPro Support. September 30, 2019. Archived from the original on 10 December 2021. Retrieved 9 December 2021.

You may want to factory reset your GoPro Camera if you are experiencing a problem and want to make sure the camera settings are not contributing to the issue. You may also want to perform a factory reset if you are experiencing lag time when changing settings or are having HDMI connectivity issues.

We are the only company in United States which repaired thousands of Gopro cameras and we still do, we started working on Gopro cameras since they started selling and we carry all the parts in stock which helps us repair your camera in 1/2 business days

PULUZ Camouflage Pattern Waterproof Carrying and Travel Case for GoPro HERO5 /4 /3+ /3 /2 /1, Puluz U6000 and Accessories, Large Size: 32cm x 22cm x 7cm

3. The highly transparent surface of the protection film for Hero 5 allows a pin and genuine presentation of contents and colors on the screen. It won"t reduce the definition and sensitivity.

4. Specifically designed for GoPro Hero 5 Black Sport Camera, both screen and lens, made of tempered glass of 0.3mm thickness, which can effectively protect the screen and lens from scratches.

Performing a factory reset on your GoPro or a hard reset can solve many performance and connection issues. It also restores the default settings on a GoPro so you can get a fresh start, which is helpful if you’re selling or giving away the camera. You can reset all types of GoPros, including the HERO, Fusion, and Session cameras. A factory reset on a GoPro doesn’t delete anything from your SD card or affect the camera’s software.

These instructions apply to the GoPro HERO9 Black, GoPro HERO8 Black, GoPro HERO7 Black, Silver, and White, the HERO6 Black, HERO 5 Black, GoPro Fusion, and GoPro HERO5 Session. If you have an older model, you can find instructions on GoPro’s website.

To clear just your device connections and reset the camera’s password, swipe down from the main screen, and tap Preferences > Connections > Reset Connections.

Press the Menu button to move to Yes, then press the Shutter button to select it. This action resets camera defaults, date and time, the camera username and password, and unregisters the device from your GoPro Plus account.