tft display interface with 8051 pricelist

The display is a critical component in every project, impacting the case, firmware, electrical design, user interface, and even battery life. For these reasons, and because it is the most visible component of your product, it must be approved by the mechanical design team, management and marketing.Before these teams can approve, they need to see it in action. But it can take days or weeks to connect a display to your platform, initialize it and build a code library able to create believable demonstrations. Meanwhile, the whole project is on hold.Our 8051 development kit / demonstration board can solve this problem. Use it to get the display seen, demonstrated and approved for your project.

ER-DBT028-4 is a microcontroller 8051(80C51) demonstration and development kit for 2.8 inch tft lcd display with ILI9341 controller.The kit includes MCU board controlled by STC12LE5A60S2,ISP(In System Programming) with USB port and cable to customize the demonstration that includes your own bitmap images,personalized fonts,symbols,icons and burn sketches,microSD card that is written graphic and text into it,the power adaptor,the adaptor board with various pitch dimension used to connect MCU board and display.Optional for 8080 8-bit,8080 16-bit parallel interface and 3-wire,4-wire serial interface.

The display is a critical component in every project, impacting the case, firmware, electrical design, user interface, and even battery life. For these reasons, and because it is the most visible component of your product, it must be approved by the mechanical design team, management and marketing.Before these teams can approve, they need to see it in action. But it can take days or weeks to connect a display to your platform, initialize it and build a code library able to create believable demonstrations. Meanwhile, the whole project is on hold.Our 8051 development kit / demonstration board can solve this problem. Use it to get the display seen, demonstrated and approved for your project.

ER-DBT032-3 is a microcontroller 8051(80C51) demonstration and development kit for ER-TFT032-3.1 product that is 3.2 inch tft lcd display with ILI9341 controller.The kit includes MCU board controlled by STC12LE5A60S2,ISP(In System Programming) with USB port and cable to customize the demonstration that includes your own bitmap images,personalized fonts,symbols,icons and burn sketches,microSD card that is written graphic and text into it,the power adaptor,the adaptor board with various pitch dimension used to connect MCU board and display.Optional for 8080 8-bit,8080 16-bit parallel interface and 3-wire,4-wire serial interface.

Senior Management and Product Marketing teams all now want TFT displays on their products, showing content rich user interfaces full of colour and graphics.

Monochrome displays are slowly going out of style. Not only have prices for colour TFTs now dropped to levels on par with STN displays, but TFTs also offer more options with respect to the display of information.

So, why do many engineers still hesitate when it comes to adding colour to their products? One reason is integrating conventional TFTs into existing systems is usually a complex process. After all, colour displays require more data and hence more memory at a higher rate than monochrome displays. Depending on the display’s level of integration, data must often be continuously updated. Basically, a high-performance processor becomes necessary…………..or does it?

IDS have introduced a range of UART TFTs from AMPIRE, a manufacturer specializing in displays for industrial applications,and for their longevity of product. These TFTs have been developed as an intelligent display solution that unburdens the main processor and is easier to drive at the same time. With integrated µC logic and memory, as well as a UART interface, these intelligent displays offer a nearly complete plug-and-play solution. Our small to medium-sized UART TFT platforms are integrated with touch screen, driving electronics and backlight drivers.

The modules can be configured as UART, RS-232 or USB versions and feature a wide input voltage range from 4.6VDC to 26VDC. With a brightness of up to 500cd/m² and resolution ranging from VGA to WVGA, the displays are well suited for many different applications. The modules are OS agnostic, working with any host operating system, or even without a host OS.

IDS have designed a complementary UI software tool to enable rapid and simple implementation of a GUI which is then stored within the on-board flash memory.Once you have installed the drivers for the USB UART to UART Display & the UART Windows software on your PC you are ready to start connecting your display (RS232/USB) and uploading your images.

Manipulate specific parts of the screen by overlaying text, or images, even create scrolling effects by shifting regions of the display. Very quickly you will get an idea of how your designs will look on the display, and how you might trigger them with simple command line instructions.

The integrated fonts and basic character/draw functions, such as text, pixel, line, right angle and circle, permit an attractive GUI to be up and running within a short amount of time. Images or graphics can be stored in 65,000 colours in the internal Display Flash, to be displayed when needed.Data is exchanged between the UART system, (UART, RS232, or USB) and your microcontroller - enabling real time interaction, and animations in high resolution,on a TFT from a few simple lines of code.

The large amounts of data that usually need to be transferred from the host system each time a TFT display updates are held on-board, dramatically reducing the strain on the CPU workload.

Featuring simple, low-overhead mechanical and technical integration, these displays are suited for the first time user or experienced display integrators.

IDS have produced a range of UART kits making it even easier to be up and running within minutes, containing a display, power supply, cables, software and example code and images.

Hi guys, welcome to today’s tutorial. Today, we will look on how to use the 1.8″ ST7735  colored TFT display with Arduino. The past few tutorials have been focused on how to use the Nokia 5110 LCD display extensively but there will be a time when we will need to use a colored display or something bigger with additional features, that’s where the 1.8″ ST7735 TFT display comes in.

The ST7735 TFT display is a 1.8″ display with a resolution of 128×160 pixels and can display a wide range of colors ( full 18-bit color, 262,144 shades!). The display uses the SPI protocol for communication and has its own pixel-addressable frame buffer which means it can be used with all kinds of microcontroller and you only need 4 i/o pins. To complement the display, it also comes with an SD card slot on which colored bitmaps can be loaded and easily displayed on the screen.

The schematics for this project is fairly easy as the only thing we will be connecting to the Arduino is the display. Connect the display to the Arduino as shown in the schematics below.

Due to variation in display pin out from different manufacturers and for clarity, the pin connection between the Arduino and the TFT display is mapped out below:

We will use two libraries from Adafruit to help us easily communicate with the LCD. The libraries include the Adafruit GFX library which can be downloaded here and the Adafruit ST7735 Library which can be downloaded here.

We will use two example sketches to demonstrate the use of the ST7735 TFT display. The first example is the lightweight TFT Display text example sketch from the Adafruit TFT examples. It can be accessed by going to examples -> TFT -> Arduino -> TFTDisplaytext. This example displays the analog value of pin A0 on the display. It is one of the easiest examples that can be used to demonstrate the ability of this display.

The second example is the graphics test example from the more capable and heavier Adafruit ST7735 Arduino library. I will explain this particular example as it features the use of the display for diverse purposes including the display of text and “animated” graphics. With the Adafruit ST7735 library installed, this example can be accessed by going to examples -> Adafruit ST7735 library -> graphics test.

Next, we create an object of the library with the pins to which the LCD is connected on the Arduino as parameters. There are two options for this, feel free to choose the most preferred.

Next, we move to the void setup function where we initialize the screen and call different test functions to display certain texts or images.  These functions can be edited to display what you want based on your project needs.

All the functions called under the void setup function, perform different functions, some draw lines, some, boxes and text with different font, color and size and they can all be edited to do what your project needs.

Uploading the code to the Arduino board brings a flash of different shapes and text with different colors on the display. I captured one and its shown in the image below.

That’s it for this tutorial guys, what interesting thing are you going to build with this display? Let’s get the conversation started. Feel free to reach me via the comment section if you have any questions as regards this project.

I buy the “3.5 LCD CTP” variant here 2.4/2.8/3.5 inch TFT LCD 40PIN Socket Capacitive Resistive Touch Display Screen ILI9488 ILI9341 R61529 Controller 0.5 MM spacing|LCD Modules| - AliExpress and it works well for me. So far got 30, in a few orders and all worked as expected. ILI9488, and capacitive touch (don’t remember the exact chip but can look up).

Another good source, but slightly more expensive is buydisplay.com, which is a stable source and comes with good documentation. You can buy bare panel or one which is mounted on its own PCB which is easier to connect by more bulky. You can find exact ICs as the one above I mentioned.

ER-TFTM035-6 is 3.5"tft lcd module display with ILI9488 controller,adaptor/breadkout board,optional resisitive touch panel,memory chip or card,font chip.

ER-TFT035-6 is 3.5 tft lcd module display in 320x480 resolution with parallel and serial spi interface.Optional touch panel.Idea for arduino,stm32,avr,8051.

This is the schematic of my project which uses 8 bit parallel interface and a bare panel. The selection of the interface is done via the IM0, IM1, IM2 pins of the TFT and it supports other interfaces such as 16 bit parallel (faster) or SPI (slower).

Powerful and carefully chosen electronics embedded in the microcontrollers can independetly or via input/output devices (switches, push buttons, sensors, LCD displays, relays etc.), control various processes and devices such as industrial automation, electric current, temperature, engine performance etc.

Very low prices enable them to be embedded in such devices in which, until recent time it was not worthwhile to embed anything. Thanks to that, the world is overwhelmed today with cheap automatic devices and various “smart” appliences.

Power supply voltage reaches its maximum and oscillator frequency becomes stable. SFRs are being filled with bits reflecting the state of all circuits within the microcontroller. All pins are configured as inputs. The overall electronis starts operation in rhythm with pulse sequence. From now on the time is measured in micro and nanoseconds.

Program Counter is set to zero. Instruction from that address is sent to instruction decoder which recognizes it, after which it is executed with immediate effect.

In electronics world today, Arduino is an open-source hardware and software company, project and user community that designs and manufactures single-board microcontrollers and microcontroller kits for building digital devices. Arduino board designs use a variety of microprocessors and controllers. The boards are equipped with sets of digital and analog input/output (I/O) pins that may be interfaced to various expansion boards (‘shields’) or breadboards (for prototyping) and other circuits.

The boards feature serial communications interfaces, including Universal Serial Bus (USB) on some models, which are also used for loading programs. The microcontrollers can be programmed using the C and C++ programming languages, using a standard API which is also known as the “Arduino language”. In addition to using traditional compiler toolchains, the Arduino project provides an integrated development environment (IDE) and a command line tool developed in Go. It aims to provide a low-cost and easy way for hobbyist and professionals to create devices that interact with their environment using sensors and actuators. Common examples of such devices intended for beginner hobbyists include simple robots, thermostats and motion detectors.

In order to follow the market tread, Orient Display engineers have developed several Arduino TFT LCD displays and Arduino OLED displays which are favored by hobbyists and professionals.

Although Orient Display provides many standard small size OLED, TN and IPS Arduino TFT displays, custom made solutions are provided with larger size displays or even with capacitive touch panel.

NMLCD-M12864D-1is 128x64 display graphic lcd module, ks0107+ks0108 controller, stn lcd, yellow green led backlight, wide operating temperature, popular size.

ERM12864SYG-2is yellow green background with 128x64 monochrome dark blue pixels, S6B0107 and S6B0108 controller that is extremely common and well documented, 6800 8-bit parallel interface,single led backlight with yellow green color included can be dimmed easily with a resistor or PWM, stn-lcd positive,wide operating temperature range, rohs compliant, compact size.

It"s easily controlled by MCU such as 8051, PIC, AVR, ARDUINO, ARM and Raspberry Pi. It can be used in any embedded systems, industrial device, security, medical and hand-held equipment.

Answer: For the segment type LCD module, if you need to modify the outline size or display content, we will start the drawing paper for your checking.

Answer: Yes, we can. Please send us your drawing paper. If you don’t have, please tell us the information of the display and your demand. We will evaluate the cost and give you the price soon.

Answer: If we have stock for the standard displays, the leading time is one day after payment. If it is mass production for special ones, the leading time is about 15~30 days. If we finish earlier, we will send email to you in advance.