lcd screen refresh rate made in china

Created by the Chinese manufacturer BOE, the fastest gaming monitor in the world has been announced via social networks and comes with a refresh rate of 500Hz, enough even for the most demanding competitive gamers.

Available to buyers in China, the monitor for gaming enthusiasts who put speed first comes with a 27-inch diagonal and only Full HD resolution. While the clarity of the image certainly suffers, the framerate has at least a chance to get close to the stunning values ​​needed to highlight the capabilities of this monitor, at least in some games.

By comparison, the fastest gaming laptops delivered by manufacturers such as Asus, Acer and Alienware cap the image refresh rate at 360Hz, which is generally considered sufficient for most situations.

Although it looks good in the spec list, the refresh rate is not exactly the absolute measure of performance, outlined by some monitor manufacturers. The equations include other factors such as the response time of the LCD technology used, the ability of the PC used to reach that frame rate, and the user’s ability to notice the difference, for example, between a monitor with a refresh rate of 144Hz and a monitor. 240Hz, or more. In general, the perceived benefits on the image clarity side are more easily noticeable between the 60Hz and 120Hz thresholds, with the actual speed of the LCD panel (response time, measured in milliseconds) becoming more important after this threshold. For example, an LCD monitor with TN technology and 120Hz refresh rate will be noticeably better than a hypothetical LCD monitor with IPS technology and refresh rate at 240Hz, simply because the ghosting effect is less noticeable on the TN monitor.

In this case, it seems that we are dealing with a new generation LCD technology, called high-mobility oxide backplane, which allows the use of ultra-high reresh rates without the benefits being canceled by the screen with time. insufficient response.

Unfortunately, the announced product still exists at most at the prototype stage, it remains to be seen how long it will take until the new type of screen will be commercially available. In addition, being a niche product for a select category of users, the new ultra-fast LCD screen is unlikely to deliver the viewing angles and contrast levels appreciated by conventional IPS solutions. Another potential obstacle to an absolutely ideal gaming experience is hardware requirements, with only a few models of NVIDIA and AMD graphics accelerators being able to reach the threshold of 500 frames per second in games, the cost of such a PC quickly reaching dizzying.

The Realme Q3t runs on Realme UI 2.0 based on Android 11. This device features a 6.67-inch FHD+ IPS LCD panel with a resolution of 1080×2412 pixels. The display is capable of a 144Hz refresh rate and 600 nits of peak brightness. That said, the Realme Q3t has an impressive 90.8 percent screen-to-body ratio, indicative of razor-thin bezels on the front, although the bottom bezel is rather prominent. The Realme Q3t also has a side-mounted fingerprint sensor.

Realme’s approach to the display differs from its competitors that offer AMOLED displays with the standard 60Hz refresh rate but support HDR content playback or a DCI-P3 color gamut in some cases.

• Perform highly diversified duties to install and maintain electrical apparatus on production machines and any other facility equipment (Screen Print, Punch Press, Steel Rule Die, Automated Machines, Turret, Laser Cutting Machines, etc.).

One of such trade-offs that buyers often have to bear is choosing between a higher refresh rate or an AMOLED panel. But which is more important for a better experience: a fast 120Hz LCD panel or a 60Hz AMOLED one? Let"s find out.

How fast a screen can refresh affects how well it can simulate motion. In other words, it makes animations appear more natural and fluid as opposed to laggy and jittery. Earlier, the standard refresh rate for smartphones used to be 60Hz. But ever since OnePlus popularized high refresh rate displays, they have become common in the tech industry.

​​​​Today, even some budget models come with a 120Hz refresh rate, mostly Chinese phones. You can notice the difference between a 60Hz and a 90Hz/120Hz panel when gaming and scrolling through apps or social media.

But before you get too excited, note that the jump in performance, i.e., how smooth the animations feel, doesn"t keep increasing consistently. A jump from 60Hz to 90Hz is a 50% upgrade, whereas a jump from 90Hz to 120Hz is only a 33.33% upgrade. And a jump from 120Hz to 144Hz is a negligible 20% upgrade. That means that you"re going to get to the point of diminishing returns beyond 120Hz, which is the sweet spot for smartphone refresh rates.

Unlike a regular LCD, an AMOLED display provides more vivid image quality, consumes less power, and does a better job at reducing screen glare. This means that any content you consume on your phone—from games to movies to social media—will appear brighter and more colorful, all while saving your battery life.

Each pixel produces its own light on an AMOLED panel, unlike LCD or IPS panels that use a backlight to illuminate the screen. Because of this, the former can show darker colors and deep blacks more accurately since it can just turn a pixel off to represent an absence of light. On the latter, the same colors appear washed out or faded.

When using Dark Mode (or Night Mode) on an AMOLED panel, the workload of the display is reduced since a measurable portion of the screen is basically turned off. Only the pixels that show colors need to be illuminated, whereas the black pixels can remain shut off. As a result, you save battery life while viewing dark content on an AMOLED screen.

If you"re a gamer, a high refresh rate display will serve you better than an AMOLED one, making your gaming experience much smoother. However, note that the higher the refresh rate, the faster you will drain your battery. Also, keep in mind that many mobile games only support 60Hz, so the benefit of having a 90Hz or 120Hz screen may be redundant.

As premium features become more common, they"re quickly making their way into budget phones. Having a high refresh rate AMOLED display is obviously better if you can find such a device in the budget category. But if you can"t, you have to trade one for the other.

Since budget phones come with weaker chips, the games you play may not always take advantage of that high refresh rate screen, making them a bit unnecessary apart from smoother scrolling of social media feeds. However, an AMOLED panel will continue to enrich your viewing experience no matter what.

Last year, the high refresh rate screen is still a major selling point, when a 120Hz screen refresh rate release, everyone’s reaction is the same “awesome! If a flagship phone is released without mentioning the screen refresh rate, everyone’s first reaction becomes, “Oh, this screen does not even support the high refresh rate, do not buy!”

It can be said that the cell phone’s 120Hz screen has become an important direction for future development, everyone’s point of view such a shift this is why?

In the last year, we can still say that the mainstream cell phone screen refresh rate of 60Hz, but this year, 90Hz refresh rate screen new machine pile up, 120Hz screen become the mainstream flagship machine, so for consumers, high refresh rate screen good where?

More intuitive is a second to refresh 60 images, 90Hz refresh rate screen can refresh 90 images a second, to 120Hz, a second to display the screen is twice 60Hz. More screens available for transition, can bring more smooth and coherent screen display effect, which is also a high refresh rate screen can bring us the most direct visual changes.

For example, in the desktop, microblogging and other use scenarios when sliding, the content moves more smoothly and coherently, looks comfortable and natural. As you can see from the above slow-motion comparison between the normal 60Hz screen and the 120Hz screen, the 120Hz screen is much smoother and more coherent when sliding. This smooth experience will run through most daily use scenarios, and the actual experience will be related to optimization.

Speaking of high refresh rate, here you must not get around a big factory – Samsung. At present, the world’s two largest suppliers of cell phone screens, one is Samsung, one is China’s BOE. Samsung has always been the industry leader in screen display, and most of the 120Hz refresh rate cell phones on the market, the screen supply is Samsung Electronics.

In the supply of high refresh rate screen, Samsung’s major advantage lies in its high quality OLED screen. Currently on the market, 120Hz refresh rate in addition to the OLED screen produced by Samsung, there are some LED screens. the biggest difference between LCD screen and AMOLED screen is that the former is by the LCD panel light, while the latter is organic self-luminous. Due to the LCD inversion problem, resulting in LCD screen response time is significantly higher than the OLED screen, so even if the LCD screen refresh rate to 120Hz, it will make the high refresh rate brings a sense of smoothness discount.

As Samsung’s latest flagship model, the masterpiece of Samsung technology, the Samsung S20 Ultra was released after the well-known screen testing agency DisplayMate also quickly did a test of the product’s screen, the test results were not unexpected, this product has by far the best screen in the smartphone.

From the Samsung S20 Ultra we can also see the advantage of Samsung in screen display, and this lead is difficult to surpass, because Samsung has occupied the core position in the OLED screen supply chain. Even top giants like Apple use Samsung’s screens, and the screens Samsung uses on its own products are definitely better than those provided to other brands.

As a screen supply chain occupies the core position of Samsung, in the research and development of high refresh rate has never stopped. displayMate mentioned that since 2010 began testing OLED display, Samsung has been systematically improving the screen display performance of each generation of products, and never seen the state of standing still in Samsung.

Called 120Hz screen to become the future direction of development and a big reason is that, even with a high refresh rate screen, sometimes can not experience the advantages of high refresh rate, after all, if the program does not support the high frame rate, in addition to the game on the smoothness of considerations, many programs currently have restrictions on the frame rate, this situation can not play the advantages of high refresh rate screen.

Of course, it is generally the hardware that keeps up first, and with the release of more phones with 120Hz refresh rate, the application ecology of 120 fps will also keep up. At present, “” already supports 120Hz, “Peace Elite” and other mainstream games also already support 90Hz high frame rate mode, with smoother game graphics in high frame rate mode. In the future, the program already supports higher refresh rates, but because of the limitations of the cell phone hardware can not get the best experience, it must be said that it is also a pity.

Of course, to say that in 2020 the high refresh rate screen can be popularized, become the standard cell phone, the biggest reason lies in with the technological breakthrough, the upstream supply chain capacity has been improved – screen giant Samsung has a mature high refresh rate screen manufacturing process. The maturity of the supply chain, technical problems overcome, production capacity, all pave the way for the popularity of high refresh rate screen, so the popularity of high refresh rate screen has become an inevitable process.

Whether it is the upstream supply chain, or the user experience, and the gradually improving 120Hz ecology, the high refresh rate screen has become a mainstream trend, which is a happy thing for consumers.

For the cell phone industry, the previous high refresh rate can be said to be a “differentiation” selling point, but in the future, 120Hz start, high refresh rate will become the standard for mainstream flagships. With the upstream supply chain production capacity in the near future, mid-range products will also be equipped with a high refresh rate screen starting at 120Hz as standard, a high refresh rate high frame rate ecology is on the way.

The Chinese display maker BOE has showcased a new display panel which sets a new benchmark in the world of gaming monitors. BOE"s new monitor offers a refresh rate of up to 500Hz, surpassing the current best monitors that can reach up to 360Hz.

The 27-inch monitor uses a high-mobility oxide TFT technology and offers full HD 1080p resolution (via Videocardz). The lower resolution is understandable considering the insanely high 500Hz refresh rate of the display. Even current 360Hz monitors are limited to 1080p resolution. The panel uses an 8-lane DisplayPort connection and offers a 1ms response time and 8-bit color gamut support.

BOE is one of the leading manufacturers of LCD, LED and OLED panels. The company is a market leader in the oxide semiconductor display market. It also makes foldable displays, which have been featured on smartphones like the Motorola Razr and Huawei Mate X.

"With years of technology accumulation, BOE has made important breakthroughs in the field of oxide semiconductor display technology, overcoming industry problems such as copper (Cu) easy to diffuse, easy to oxidize, and easy to drill and engrave, and is the first in the industry to achieve mass production of copper interconnect stack structures. And the integration of high refresh rate, high resolution, low power consumption oxide display technology," reports Chinese publication Sina.com (machine-translated by Google).

Note that this monitor is a prototype unit, meant for demonstration only. We don’t know when, if ever, BOE plans to commercially launch a monitor with a 500Hz refresh rate. BOE also didn’t detail whether there are any tangible benefits of having a display that offers a whopping 500Hz refresh rate. In any case, you"ll definitely need one of the best graphics cards out there to drive this thing.

Recently, a few LCD displays with 240 Hz frame rate have appeared on the market. I evaluated a LCD display with 240 Hz frame rate in terms of its temporal characteristics, progression between frames, and chromatic characteristics. The display showed (a) accurate frame durations at millisecond level, (b) gradual transition between adjacent frames, and (c) acceptable chromatic characteristics.

LCD technology is constantly improving in ways that are beneficial to the needs of visual scientists. It used to be that LCD displays were not suitable for displaying objects in high-speed motion because of relatively slow updating speeds of LCD pixels. Recently, a few LCD displays with 240 Hz frame rate have appeared on the market, designed for computer game players. Here, I evaluate a LCD display (ROG PG258Q, ASUS) with 240 Hz frame rate in terms of its temporal characteristics, progression between frames, and chromatic characteristics. The display showed accurate frame durations at millisecond level and a gradual transition between adjacent frames, with no evidence of ghosting from one frame to the next. The full response spectra for the three color channels are also presented.

Stimuli were controlled by web pages using HTML, JavaScript, and WebGL technology on a PC (Intel Core i7-6700 CPU, NVidia GeForce GTX 1060 GPU). The LCD display was connected to the graphics card through a DisplayPort cable of a PC running 64-bit Microsoft Windows 10 Home Edition (Chinese version). The web browser was Firefox (version number 53.0, 64-bit). OpenGL shader programs were used to make sure the stimuli were generated in real-time on the GPU and to make sure the stimuli were displayed reliably at the 240 Hz frame rate. The driver of the LCD display was set to a 1920 × 1080 resolution, 240 Hz frame rate, 32-bit color mode, and G-Sync was turned on (G-Sync is a sync technology developed by Nvidia aimed to eliminate screen tearing, and more details are available on the Nvidia web site).

Temporal characteristics were measured by a light meter (LM03, Cambridge Research Systems Ltd., which is a demonstration product, provided freely at Asia Pacific Conference on Vision 2014, but not available for sale by CRS Ltd.) and a high-speed video camera (RX100-V, SONY). The LM03 light meter was designed for high temporal resolution but not necessarily accurate measurement of intensity. Precise measurement of output intensities to measure the gamma properties, for instance, is not the aim of this review. Temporal intensity variations of red, green, and blue channels and frame switching were measured as described later.

A sequence of frames was presented, with red, green, and blue separately increasing (in 240 steps) from 0 to 1 and then decreasing again, with a black frame (r = 0, g = 0, b = 0) inserted between two continuous frames in order to separate continuous change clearly. The sample interval of the light meter was set as 500 microseconds and the monitor frame rate was set to 240 Hz. A subset of the data from the green channel measurements can be seen in Figure 1, which shows (a) the temporal intensity variation between the minimum value and the peak value was regular, sharp, and rapid; (b) transitions from dark-to-light were slower than transitions from light-to-dark; and (c) distance between adjacent peaks were in the range 8 to 8.5 ms which was consistent with frame duration 8.3 ms (two frames in 240 Hz frame rate). The variability may derive from aliasing between the sampling frequency (500 Hz) and the display frequency (240 Hz) rather than any actual imprecision in the frame rate.

Animated numbers were displayed on a constant changing background. The number increased one at each frame. The frame rate was set as 240 Hz. The frame sequence was recorded by the high-speed video camera with a sample rate 1000 Hz.

Figure 2 shows nine continuous frames captured by the camera, representing three display frames on the monitor (labeled 680, 681, and 682). Display Frame 681 corresponded to camera Frames 2, 3, 4, and 5 and display Frame 682 corresponded to camera Frames 6, 7, 8, and 9. Camera Frames 2, 3, 4, 6, 7, and 8 showed the gradual changes between two display frames as the LCD pixels switched.

In Figure 3, we show the results of switching a larger pattern on the screen, with two adjacent frames showing a hexagonal checkerboard (camera Frame 1) and square checkerboard (camera Frame 6). Fusion between the hexagon and the square patterns was observed in white hexagons and white squares. Intermediate camera frames show the gradual transition between the images.

The stimulus frames were full screen uniform background which r, g, b values varied from 0 to 1 in 16 steps separately. A spectrometer (eye-one pro, X-rite) measured spectrum of the display from 390 nm to 740 nm with 5 nm step, as shown in Figure 4. Further testing is needed to determine the monitor’s chromatic characteristics precisely.

Spectrum of red, green, and blue channels. The r, g, and b values were varied from 0 to 1 in 16 steps separately and are shown as increasing lines in their corresponding color.

This 240 Hz LCD display has the following characteristics: (a) accurate frame durations at millisecond level; (b) gradual transition between adjacent frames; and (c) acceptable chromatic characteristics.

Glass substrate with ITO electrodes. The shapes of these electrodes will determine the shapes that will appear when the LCD is switched ON. Vertical ridges etched on the surface are smooth.

A liquid-crystal display (LCD) is a flat-panel display or other electronically modulated optical device that uses the light-modulating properties of liquid crystals combined with polarizers. Liquid crystals do not emit light directlybacklight or reflector to produce images in color or monochrome.seven-segment displays, as in a digital clock, are all good examples of devices with these displays. They use the same basic technology, except that arbitrary images are made from a matrix of small pixels, while other displays have larger elements. LCDs can either be normally on (positive) or off (negative), depending on the polarizer arrangement. For example, a character positive LCD with a backlight will have black lettering on a background that is the color of the backlight, and a character negative LCD will have a black background with the letters being of the same color as the backlight. Optical filters are added to white on blue LCDs to give them their characteristic appearance.

LCDs are used in a wide range of applications, including LCD televisions, computer monitors, instrument panels, aircraft cockpit displays, and indoor and outdoor signage. Small LCD screens are common in LCD projectors and portable consumer devices such as digital cameras, watches, digital clocks, calculators, and mobile telephones, including smartphones. LCD screens are also used on consumer electronics products such as DVD players, video game devices and clocks. LCD screens have replaced heavy, bulky cathode-ray tube (CRT) displays in nearly all applications. LCD screens are available in a wider range of screen sizes than CRT and plasma displays, with LCD screens available in sizes ranging from tiny digital watches to very large television receivers. LCDs are slowly being replaced by OLEDs, which can be easily made into different shapes, and have a lower response time, wider color gamut, virtually infinite color contrast and viewing angles, lower weight for a given display size and a slimmer profile (because OLEDs use a single glass or plastic panel whereas LCDs use two glass panels; the thickness of the panels increases with size but the increase is more noticeable on LCDs) and potentially lower power consumption (as the display is only "on" where needed and there is no backlight). OLEDs, however, are more expensive for a given display size due to the very expensive electroluminescent materials or phosphors that they use. Also due to the use of phosphors, OLEDs suffer from screen burn-in and there is currently no way to recycle OLED displays, whereas LCD panels can be recycled, although the technology required to recycle LCDs is not yet widespread. Attempts to maintain the competitiveness of LCDs are quantum dot displays, marketed as SUHD, QLED or Triluminos, which are displays with blue LED backlighting and a Quantum-dot enhancement film (QDEF) that converts part of the blue light into red and green, offering similar performance to an OLED display at a lower price, but the quantum dot layer that gives these displays their characteristics can not yet be recycled.

Since LCD screens do not use phosphors, they rarely suffer image burn-in when a static image is displayed on a screen for a long time, e.g., the table frame for an airline flight schedule on an indoor sign. LCDs are, however, susceptible to image persistence.battery-powered electronic equipment more efficiently than a CRT can be. By 2008, annual sales of televisions with LCD screens exceeded sales of CRT units worldwide, and the CRT became obsolete for most purposes.

Each pixel of an LCD typically consists of a layer of molecules aligned between two transparent electrodes, often made of Indium-Tin oxide (ITO) and two polarizing filters (parallel and perpendicular polarizers), the axes of transmission of which are (in most of the cases) perpendicular to each other. Without the liquid crystal between the polarizing filters, light passing through the first filter would be blocked by the second (crossed) polarizer. Before an electric field is applied, the orientation of the liquid-crystal molecules is determined by the alignment at the surfaces of electrodes. In a twisted nematic (TN) device, the surface alignment directions at the two electrodes are perpendicular to each other, and so the molecules arrange themselves in a helical structure, or twist. This induces the rotation of the polarization of the incident light, and the device appears gray. If the applied voltage is large enough, the liquid crystal molecules in the center of the layer are almost completely untwisted and the polarization of the incident light is not rotated as it passes through the liquid crystal layer. This light will then be mainly polarized perpendicular to the second filter, and thus be blocked and the pixel will appear black. By controlling the voltage applied across the liquid crystal layer in each pixel, light can be allowed to pass through in varying amounts thus constituting different levels of gray.

The chemical formula of the liquid crystals used in LCDs may vary. Formulas may be patented.Sharp Corporation. The patent that covered that specific mixture expired.

Most color LCD systems use the same technique, with color filters used to generate red, green, and blue subpixels. The LCD color filters are made with a photolithography process on large glass sheets that are later glued with other glass sheets containing a TFT array, spacers and liquid crystal, creating several color LCDs that are then cut from one another and laminated with polarizer sheets. Red, green, blue and black photoresists (resists) are used. All resists contain a finely ground powdered pigment, with particles being just 40 nanometers across. The black resist is the first to be applied; this will create a black grid (known in the industry as a black matrix) that will separate red, green and blue subpixels from one another, increasing contrast ratios and preventing light from leaking from one subpixel onto other surrounding subpixels.Super-twisted nematic LCD, where the variable twist between tighter-spaced plates causes a varying double refraction birefringence, thus changing the hue.

LCD in a Texas Instruments calculator with top polarizer removed from device and placed on top, such that the top and bottom polarizers are perpendicular. As a result, the colors are inverted.

The optical effect of a TN device in the voltage-on state is far less dependent on variations in the device thickness than that in the voltage-off state. Because of this, TN displays with low information content and no backlighting are usually operated between crossed polarizers such that they appear bright with no voltage (the eye is much more sensitive to variations in the dark state than the bright state). As most of 2010-era LCDs are used in television sets, monitors and smartphones, they have high-resolution matrix arrays of pixels to display arbitrary images using backlighting with a dark background. When no image is displayed, different arrangements are used. For this purpose, TN LCDs are operated between parallel polarizers, whereas IPS LCDs feature crossed polarizers. In many applications IPS LCDs have replaced TN LCDs, particularly in smartphones. Both the liquid crystal material and the alignment layer material contain ionic compounds. If an electric field of one particular polarity is applied for a long period of time, this ionic material is attracted to the surfaces and degrades the device performance. This is avoided either by applying an alternating current or by reversing the polarity of the electric field as the device is addressed (the response of the liquid crystal layer is identical, regardless of the polarity of the applied field).

Displays for a small number of individual digits or fixed symbols (as in digital watches and pocket calculators) can be implemented with independent electrodes for each segment.alphanumeric or variable graphics displays are usually implemented with pixels arranged as a matrix consisting of electrically connected rows on one side of the LC layer and columns on the other side, which makes it possible to address each pixel at the intersections. The general method of matrix addressing consists of sequentially addressing one side of the matrix, for example by selecting the rows one-by-one and applying the picture information on the other side at the columns row-by-row. For details on the various matrix addressing schemes see passive-matrix and active-matrix addressed LCDs.

LCDs, along with OLED displays, are manufactured in cleanrooms borrowing techniques from semiconductor manufacturing and using large sheets of glass whose size has increased over time. Several displays are manufactured at the same time, and then cut from the sheet of glass, also known as the mother glass or LCD glass substrate. The increase in size allows more displays or larger displays to be made, just like with increasing wafer sizes in semiconductor manufacturing. The glass sizes are as follows:

Until Gen 8, manufacturers would not agree on a single mother glass size and as a result, different manufacturers would use slightly different glass sizes for the same generation. Some manufacturers have adopted Gen 8.6 mother glass sheets which are only slightly larger than Gen 8.5, allowing for more 50 and 58 inch LCDs to be made per mother glass, specially 58 inch LCDs, in which case 6 can be produced on a Gen 8.6 mother glass vs only 3 on a Gen 8.5 mother glass, significantly reducing waste.AGC Inc., Corning Inc., and Nippon Electric Glass.

In 1922, Georges Friedel described the structure and properties of liquid crystals and classified them in three types (nematics, smectics and cholesterics). In 1927, Vsevolod Frederiks devised the electrically switched light valve, called the Fréedericksz transition, the essential effect of all LCD technology. In 1936, the Marconi Wireless Telegraph company patented the first practical application of the technology, "The Liquid Crystal Light Valve". In 1962, the first major English language publication Molecular Structure and Properties of Liquid Crystals was published by Dr. George W. Gray.RCA found that liquid crystals had some interesting electro-optic characteristics and he realized an electro-optical effect by generating stripe-patterns in a thin layer of liquid crystal material by the application of a voltage. This effect is based on an electro-hydrodynamic instability forming what are now called "Williams domains" inside the liquid crystal.

In the late 1960s, pioneering work on liquid crystals was undertaken by the UK"s Royal Radar Establishment at Malvern, England. The team at RRE supported ongoing work by George William Gray and his team at the University of Hull who ultimately discovered the cyanobiphenyl liquid crystals, which had correct stability and temperature properties for application in LCDs.

The idea of a TFT-based liquid-crystal display (LCD) was conceived by Bernard Lechner of RCA Laboratories in 1968.dynamic scattering mode (DSM) LCD that used standard discrete MOSFETs.

On December 4, 1970, the twisted nematic field effect (TN) in liquid crystals was filed for patent by Hoffmann-LaRoche in Switzerland, (Swiss patent No. 532 261) with Wolfgang Helfrich and Martin Schadt (then working for the Central Research Laboratories) listed as inventors.Brown, Boveri & Cie, its joint venture partner at that time, which produced TN displays for wristwatches and other applications during the 1970s for the international markets including the Japanese electronics industry, which soon produced the first digital quartz wristwatches with TN-LCDs and numerous other products. James Fergason, while working with Sardari Arora and Alfred Saupe at Kent State University Liquid Crystal Institute, filed an identical patent in the United States on April 22, 1971.ILIXCO (now LXD Incorporated), produced LCDs based on the TN-effect, which soon superseded the poor-quality DSM types due to improvements of lower operating voltages and lower power consumption. Tetsuro Hama and Izuhiko Nishimura of Seiko received a US patent dated February 1971, for an electronic wristwatch incorporating a TN-LCD.

In 1972, the concept of the active-matrix thin-film transistor (TFT) liquid-crystal display panel was prototyped in the United States by T. Peter Brody"s team at Westinghouse, in Pittsburgh, Pennsylvania.Westinghouse Research Laboratories demonstrated the first thin-film-transistor liquid-crystal display (TFT LCD).high-resolution and high-quality electronic visual display devices use TFT-based active matrix displays.active-matrix liquid-crystal display (AM LCD) in 1974, and then Brody coined the term "active matrix" in 1975.

In 1972 North American Rockwell Microelectronics Corp introduced the use of DSM LCDs for calculators for marketing by Lloyds Electronics Inc, though these required an internal light source for illumination.Sharp Corporation followed with DSM LCDs for pocket-sized calculators in 1973Seiko and its first 6-digit TN-LCD quartz wristwatch, and Casio"s "Casiotron". Color LCDs based on Guest-Host interaction were invented by a team at RCA in 1968.TFT LCDs similar to the prototypes developed by a Westinghouse team in 1972 were patented in 1976 by a team at Sharp consisting of Fumiaki Funada, Masataka Matsuura, and Tomio Wada,

In 1983, researchers at Brown, Boveri & Cie (BBC) Research Center, Switzerland, invented the passive matrix-addressed LCDs. H. Amstutz et al. were listed as inventors in the corresponding patent applications filed in Switzerland on July 7, 1983, and October 28, 1983. Patents were granted in Switzerland CH 665491, Europe EP 0131216,

The first color LCD televisions were developed as handheld televisions in Japan. In 1980, Hattori Seiko"s R&D group began development on color LCD pocket televisions.Seiko Epson released the first LCD television, the Epson TV Watch, a wristwatch equipped with a small active-matrix LCD television.dot matrix TN-LCD in 1983.Citizen Watch,TFT LCD.computer monitors and LCD televisions.3LCD projection technology in the 1980s, and licensed it for use in projectors in 1988.compact, full-color LCD projector.

In 1990, under different titles, inventors conceived electro optical effects as alternatives to twisted nematic field effect LCDs (TN- and STN- LCDs). One approach was to use interdigital electrodes on one glass substrate only to produce an electric field essentially parallel to the glass substrates.Germany by Guenter Baur et al. and patented in various countries.Hitachi work out various practical details of the IPS technology to interconnect the thin-film transistor array as a matrix and to avoid undesirable stray fields in between pixels.

Hitachi also improved the viewing angle dependence further by optimizing the shape of the electrodes (Super IPS). NEC and Hitachi become early manufacturers of active-matrix addressed LCDs based on the IPS technology. This is a milestone for implementing large-screen LCDs having acceptable visual performance for flat-panel computer monitors and television screens. In 1996, Samsung developed the optical patterning technique that enables multi-domain LCD. Multi-domain and In Plane Switching subsequently remain the dominant LCD designs through 2006.South Korea and Taiwan,

In 2007 the image quality of LCD televisions surpassed the image quality of cathode-ray-tube-based (CRT) TVs.LCD TVs were projected to account 50% of the 200 million TVs to be shipped globally in 2006, according to Displaybank.Toshiba announced 2560 × 1600 pixels on a 6.1-inch (155 mm) LCD panel, suitable for use in a tablet computer,transparent and flexible, but they cannot emit light without a backlight like OLED and microLED, which are other technologies that can also be made flexible and transparent.

In 2016, Panasonic developed IPS LCDs with a contrast ratio of 1,000,000:1, rivaling OLEDs. This technology was later put into mass production as dual layer, dual panel or LMCL (Light Modulating Cell Layer) LCDs. The technology uses 2 liquid crystal layers instead of one, and may be used along with a mini-LED backlight and quantum dot sheets.

Since LCDs produce no light of their own, they require external light to produce a visible image.backlight. Active-matrix LCDs are almost always backlit.Transflective LCDs combine the features of a backlit transmissive display and a reflective display.

CCFL: The LCD panel is lit either by two cold cathode fluorescent lamps placed at opposite edges of the display or an array of parallel CCFLs behind larger displays. A diffuser (made of PMMA acrylic plastic, also known as a wave or light guide/guiding plateinverter to convert whatever DC voltage the device uses (usually 5 or 12 V) to ≈1000 V needed to light a CCFL.

EL-WLED: The LCD panel is lit by a row of white LEDs placed at one or more edges of the screen. A light diffuser (light guide plate, LGP) is then used to spread the light evenly across the whole display, similarly to edge-lit CCFL LCD backlights. The diffuser is made out of either PMMA plastic or special glass, PMMA is used in most cases because it is rugged, while special glass is used when the thickness of the LCD is of primary concern, because it doesn"t expand as much when heated or exposed to moisture, which allows LCDs to be just 5mm thick. Quantum dots may be placed on top of the diffuser as a quantum dot enhancement film (QDEF, in which case they need a layer to be protected from heat and humidity) or on the color filter of the LCD, replacing the resists that are normally used.

WLED array: The LCD panel is lit by a full array of white LEDs placed behind a diffuser behind the panel. LCDs that use this implementation will usually have the ability to dim or completely turn off the LEDs in the dark areas of the image being displayed, effectively increasing the contrast ratio of the display. The precision with which this can be done will depend on the number of dimming zones of the display. The more dimming zones, the more precise the dimming, with less obvious blooming artifacts which are visible as dark grey patches surrounded by the unlit areas of the LCD. As of 2012, this design gets most of its use from upscale, larger-screen LCD televisions.

RGB-LED array: Similar to the WLED array, except the panel is lit by a full array of RGB LEDs. While displays lit with white LEDs usually have a poorer color gamut than CCFL lit displays, panels lit with RGB LEDs have very wide color gamuts. This implementation is most popular on professional graphics editing LCDs. As of 2012, LCDs in this category usually cost more than $1000. As of 2016 the cost of this category has drastically reduced and such LCD televisions obtained same price levels as the former 28" (71 cm) CRT based categories.

Monochrome LEDs: such as red, green, yellow or blue LEDs are used in the small passive monochrome LCDs typically used in clocks, watches and small appliances.

Today, most LCD screens are being designed with an LED backlight instead of the traditional CCFL backlight, while that backlight is dynamically controlled with the video information (dynamic backlight control). The combination with the dynamic backlight control, invented by Philips researchers Douglas Stanton, Martinus Stroomer and Adrianus de Vaan, simultaneously increases the dynamic range of the display system (also marketed as HDR, high dynamic range television or FLAD, full-area local area dimming).

The LCD backlight systems are made highly efficient by applying optical films such as prismatic structure (prism sheet) to gain the light into the desired viewer directions and reflective polarizing films that recycle the polarized light that was formerly absorbed by the first polarizer of the LCD (invented by Philips researchers Adrianus de Vaan and Paulus Schaareman),

Due to the LCD layer that generates the desired high resolution images at flashing video speeds using very low power electronics in combination with LED based backlight technologies, LCD technology has become the dominant display technology for products such as televisions, desktop monitors, notebooks, tablets, smartphones and mobile phones. Although competing OLED technology is pushed to the market, such OLED displays do not feature the HDR capabilities like LCDs in combination with 2D LED backlight technologies have, reason why the annual market of such LCD-based products is still growing faster (in volume) than OLED-based products while the efficiency of LCDs (and products like portable computers, mobile phones and televisions) may even be further improved by preventing the light to be absorbed in the colour filters of the LCD.

A pink elastomeric connector mating an LCD panel to circuit board traces, shown next to a centimeter-scale ruler. The conductive and insulating layers in the black stripe are very small.

A standard television receiver screen, a modern LCD panel, has over six million pixels, and they are all individually powered by a wire network embedded in the screen. The fine wires, or pathways, form a grid with vertical wires across the whole screen on one side of the screen and horizontal wires across the whole screen on the other side of the screen. To this grid each pixel has a positive connection on one side and a negative connection on the other side. So the total amount of wires needed for a 1080p display is 3 x 1920 going vertically and 1080 going horizontally for a total of 6840 wires horizontally and vertically. That"s three for red, green and blue and 1920 columns of pixels for each color for a total of 5760 wires going vertically and 1080 rows of wires going horizontally. For a panel that is 28.8 inches (73 centimeters) wide, that means a wire density of 200 wires per inch along the horizontal edge.

The LCD panel is powered by LCD drivers that are carefully matched up with the edge of the LCD panel at the factory level. The drivers may be installed using several methods, the most common of which are COG (Chip-On-Glass) and TAB (Tape-automated bonding) These same principles apply also for smartphone screens that are much smaller than TV screens.anisotropic conductive film or, for lower densities, elastomeric connectors.

Monochrome and later color passive-matrix LCDs were standard in most early laptops (although a few used plasma displaysGame Boyactive-matrix became standard on all laptops. The commercially unsuccessful Macintosh Portable (released in 1989) was one of the first to use an active-matrix display (though still monochrome). Passive-matrix LCDs are still used in the 2010s for applications less demanding than laptop computers and TVs, such as inexpensive calculators. In particular, these are used on portable devices where less information content needs to be displayed, lowest power consumption (no backlight) and low cost are desired or readability in direct sunlight is needed.

A comparison between a blank passive-matrix display (top) and a blank active-matrix display (bottom). A passive-matrix display can be identified when the blank background is more grey in appearance than the crisper active-matrix display, fog appears on all edges of the screen, and while pictures appear to be fading on the screen.

STN LCDs have to be continuously refreshed by alternating pulsed voltages of one polarity during one frame and pulses of opposite polarity during the next frame. Individual pixels are addressed by the corresponding row and column circuits. This type of display is called response times and poor contrast are typical of passive-matrix addressed LCDs with too many pixels and driven according to the "Alt & Pleshko" drive scheme. Welzen and de Vaan also invented a non RMS drive scheme enabling to drive STN displays with video rates and enabling to show smooth moving video images on an STN display.

Bistable LCDs do not require continuous refreshing. Rewriting is only required for picture information changes. In 1984 HA van Sprang and AJSM de Vaan invented an STN type display that could be operated in a bistable mode, enabling extremely high resolution images up to 4000 lines or more using only low voltages.

High-resolution color displays, such as modern LCD computer monitors and televisions, use an active-matrix structure. A matrix of thin-film transistors (TFTs) is added to the electrodes in contact with the LC layer. Each pixel has its own dedicated transistor, allowing each column line to access one pixel. When a row line is selected, all of the column lines are connected to a row of pixels and voltages corresponding to the picture information are driven onto all of the column lines. The row line is then deactivated and the next row line is selected. All of the row lines are selected in sequence during a refresh operation. Active-matrix addressed displays look brighter and sharper than passive-matrix addressed displays of the same size, and generally have quicker response times, producing much better images. Sharp produces bistable reflective LCDs with a 1-bit SRAM cell per pixel that only requires small amounts of power to maintain an image.

Segment LCDs can also have color by using Field Sequential Color (FSC LCD). This kind of displays have a high speed passive segment LCD panel with an RGB backlight. The backlight quickly changes color, making it appear white to the naked eye. The LCD panel is synchronized with the backlight. For example, to make a segment appear red, the segment is only turned ON when the backlight is red, and to make a segment appear magenta, the segment is turned ON when the backlight is blue, and it continues to be ON while the backlight becomes red, and it turns OFF when the backlight becomes green. To make a segment appear black, the segment is always turned ON. An FSC LCD divides a color image into 3 images (one Red, one Green and one Blue) and it displays them in order. Due to persistence of vision, the 3 monochromatic images appear as one color image. An FSC LCD needs an LCD panel with a refresh rate of 180 Hz, and the response time is reduced to just 5 milliseconds when compared with normal STN LCD panels which have a response time of 16 milliseconds.

Samsung introduced UFB (Ultra Fine & Bright) displays back in 2002, utilized the super-birefringent effect. It has the luminance, color gamut, and most of the contrast of a TFT-LCD, but only consumes as much power as an STN display, according to Samsung. It was being used in a variety of Samsung cellular-telephone models produced until late 2006, when Samsung stopped producing UFB displays. UFB displays were also used in certain models of LG mobile phones.

In-plane switching is an LCD technology that aligns the liquid crystals in a plane parallel to the glass substrates. In this method, the electrical field is applied through opposite electrodes on the same glass substrate, so that the liquid crystals can be reoriented (switched) essentially in the same plane, although fringe fields inhibit a homogeneous reorientation. This requires two transistors for each pixel instead of the single transistor needed for a standard thin-film transistor (TFT) display. The IPS technology is used in everything from televisions, computer monitors, and even wearable devices, especially almost all LCD smartphone panels are IPS/FFS mode. IPS displays belong to the LCD panel family screen types. The other two types are VA and TN. Before LG Enhanced IPS was introduced in 2001 by Hitachi as 17" monitor in Market, the additional transistors resulted in blocking more transmission area, thus requiring a brighter backlight and consuming more power, making this type of display less desirable for notebook computers. Panasonic Himeji G8.5 was using an enhanced version of IPS, also LGD in Korea, then currently the world biggest LCD panel manufacture BOE in China is also IPS/FFS mode TV panel.

In 2011, LG claimed the smartphone LG Optimus Black (IPS LCD (LCD NOVA)) has the brightness up to 700 nits, while the competitor has only IPS LCD with 518 nits and double an active-matrix OLED (AMOLED) display with 305 nits. LG also claimed the NOVA display to be 50 percent more efficient than regular LCDs and to consume only 50 percent of the power of AMOLED displays when producing white on screen.

This pixel-layout is found in S-IPS LCDs. A chevron shape is used to widen the viewing cone (range of viewing directions with good contrast and low color shift).

Vertical-alignment displays are a form of LCDs in which the liquid crystals naturally align vertically to the glass substrates. When no voltage is applied, the liquid crystals remain perpendicular to the substrate, creating a black display between crossed polarizers. When voltage is applied, the liquid crystals shift to a tilted position, allowing light to pass through and create a gray-scale display depending on the amount of tilt generated by the electric field. It has a deeper-black background, a higher contrast ratio, a wider viewing angle, and better image quality at extreme temperatures than traditional twisted-nematic displays.

Blue phase mode LCDs have been shown as engineering samples early in 2008, but they are not in mass-production. The physics of blue phase mode LCDs suggest that very short switching times (≈1 ms) can be achieved, so time sequential color control can possibly be realized and expensive color filters would be obsolete.

Some LCD panels have defective transistors, causing permanently lit or unlit pixels which are commonly referred to as stuck pixels or dead pixels respectively. Unlike integrated circuits (ICs), LCD panels with a few defective transistors are usually still usable. Manufacturers" policies for the acceptable number of defective pixels vary greatly. At one point, Samsung held a zero-tolerance policy for LCD monitors sold in Korea.ISO 13406-2 standard.

Dead pixel policies are often hotly debated between manufacturers and customers. To regulate the acceptability of defects and to protect the end user, ISO released the ISO 13406-2 standard,ISO 9241, specifically ISO-9241-302, 303, 305, 307:2008 pixel defects. However, not every LCD manufacturer conforms to the ISO standard and the ISO standard is quite often interpreted in different ways. LCD panels are more likely to have defects than most ICs due to their larger size. For example, a 300 mm SVGA LCD has 8 defects and a 150 mm wafer has only 3 defects. However, 134 of the 137 dies on the wafer will be acceptable, whereas rejection of the whole LCD panel would be a 0% yield. In recent years, quality control has been improved. An SVGA LCD panel with 4 defective pixels is usually considered defective and customers can request an exchange for a new one.

Some manufacturers, notably in South Korea where some of the largest LCD panel manufacturers, such as LG, are located, now have a zero-defective-pixel guarantee, which is an extra screening process which can then determine "A"- and "B"-grade panels.clouding (or less commonly mura), which describes the uneven patches of changes in luminance. It is most visible in dark or black areas of displayed scenes.

The zenithal bistable device (ZBD), developed by Qinetiq (formerly DERA), can retain an image without power. The crystals may exist in one of two stable orientations ("black" and "white") and power is only required to change the image. ZBD Displays is a spin-off company from QinetiQ who manufactured both grayscale and color ZBD devices. Kent Displays has also developed a "no-power" display that uses polymer stabilized cholesteric liquid crystal (ChLCD). In 2009 Kent demonstrated the use of a ChLCD to cover the entire surface of a mobile phone, allowing it to change colors, and keep that color even when power is removed.

In 2004, researchers at the University of Oxford demonstrated two new types of zero-power bistable LCDs based on Zenithal bistable techniques.e.g., BiNem technology, are based mainly on the surface properties and need specific weak anchoring materials.

Resolution The resolution of an LCD is expressed by the number of columns and rows of pixels (e.g., 1024×768). Each pixel is usually composed 3 sub-pixels, a red, a green, and a blue one. This had been one of the few features of LCD performance that remained uniform among different designs. However, there are newer designs that share sub-pixels among pixels and add Quattron which attempt to efficiently increase the perceived resolution of a display without increasing the actual resolution, to mixed results.

Spatial performance: For a computer monitor or some other display that is being viewed from a very close distance, resolution is often expressed in terms of dot pitch or pixels per inch, which is consistent with the printing industry. Display density varies per application, with televisions generally having a low density for long-distance viewing and portable devices having a high density for close-range detail. The Viewing Angle of an LCD may be important depending on the display and its usage, the limitations of certain display technologies mean the display only displays accurately at certain angles.

Temporal performance: the temporal resolution of an LCD is how well it can display changing images, or the accuracy and the number of times per second the display draws the data it is being given. LCD pixels do not flash on/off between frames, so LCD monitors exhibit no refresh-induced flicker no matter how low the refresh rate.

Color performance: There are multiple terms to describe different aspects of color performance of a display. Color gamut is the range of colors that can be displayed, and color depth, which is the fineness with which the color range is divided. Color gamut is a relatively straight forward feature, but it is rarely discussed in marketing materials except at the professional level. Having a color range that exceeds the content being shown on the screen has no benefits, so displays are only made to perform within or below the range of a certain specification.white point and gamma correction, which describe what color white is and how the other colors are displayed relative to white.

Brightness and contrast ratio: Contrast ratio is the ratio of the brightness of a full-on pixel to a full-off pixel. The LCD itself is only a light valve and does not generate light; the light comes from a backlight that is either fluorescent or a set of LEDs. Brightness is usually stated as the maximum light output of the LCD, which can vary greatly based on the transparency of the LCD and the brightness of the backlight. Brighter backlight allows stronger contrast and higher dynamic range (HDR displays are graded in peak luminance), but there is always a trade-off between brightness and power consumption.

Usually no refresh-rate flicker, because the LCD pixels hold their state between refreshes (which are usually done at 200 Hz or faster, regardless of the input refresh rate).

No theoretical resolution limit. When multiple LCD panels are used together to create a single canvas, each additional panel increases the total resolution of the display, which is commonly called stacked resolution.

As an inherently digital device, the LCD can natively display digital data from a DVI or HDMI connection without requiring conversion to analog. Some LCD panels have native fiber optic inputs in addition to DVI and HDMI.

As of 2012, most implementations of LCD backlighting use pulse-width modulation (PWM) to dim the display,CRT monitor at 85 Hz refresh rate would (this is because the entire screen is strobing on and off rather than a CRT"s phosphor sustained dot which continually scans across the display, leaving some part of the display always lit), causing severe eye-strain for some people.LED-backlit monitors, because the LEDs switch on and off faster than a CCFL lamp.

Only one native resolution. Displaying any other resolution either requires a video scaler, causing blurriness and jagged edges, or running the display at native resolution using 1:1 pixel mapping, causing the image either not to fill the screen (letterboxed display), or to run off the lower or right edges of the screen.

Fixed bit depth (also called color depth). Many cheaper LCDs are only able to display 262144 (218) colors. 8-bit S-IPS panels can display 16 million (224) colors and have significantly better black level, but are expensive and have slower response time.

Input lag, because the LCD"s A/D converter waits for each frame to be completely been output before drawing it to the LCD panel. Many LCD monitors do post-processing before displaying the image in an attempt to compensate for poor color fidelity, which adds an additional lag. Further, a video scaler must be used when displaying non-native resolutions, which adds yet more time lag. Scaling and post processing are usually done in a single chip on modern monitors, but each function that chip performs adds some delay. Some displays have a video gaming mode which disables all or most processing to reduce perceivable input lag.

Dead or stuck pixels may occur during manufacturing or after a period of use. A stuck pixel will glow with color even on an all-black screen, while a dead one will always remain black.

In a constant-on situation, thermalization may occur in case of bad thermal management, in which part of the screen has overheated and looks discolored compared to the rest of the screen.

Loss of brightness and much slower response times in low temperature environments. In sub-zero environments, LCD screens may cease to function without the use of supplemental heating.

Several different families of liquid crystals are used in liquid crystal displays. The molecules used have to be anisotropic, and to exhibit mutual attraction. Polarizable rod-shaped molecules (biphenyls, terphenyls, etc.) are common. A common form is a pair of aromatic benzene rings, with a nonpolar moiety (pentyl, heptyl, octyl, or alkyl oxy group) on one end and polar (nitrile, halogen) on the other. Sometimes the benzene rings are separated with an acetylene group, ethylene, CH=N, CH=NO, N=N, N=NO, or ester group. In practice, eutectic mixtures of several chemicals are used, to achieve wider temperature operating range (−10..+60 °C for low-end and −20..+100 °C for high-performance displays). For example, the E7 mixture is composed of three biphenyls and one terphenyl: 39 wt.% of 4"-pentyl[1,1"-biphenyl]-4-carbonitrile (nematic range 24..35 °C), 36 wt.% of 4"-heptyl[1,1"-biphenyl]-4-carbonitrile (nematic range 30..43 °C), 16 wt.% of 4"-octoxy[1,1"-biphenyl]-4-carbonitrile (nematic range 54..80 °C), and 9 wt.% of 4-pentyl[1,1":4",1-terphenyl]-4-carbonitrile (nematic range 131..240 °C).

The production of LCD screens uses nitrogen trifluoride (NF3) as an etching fluid during the production of the thin-film components. NF3 is a potent greenhouse gas, and its relatively long half-life may make it a potentially harmful contributor to global warming. A report in Geophysical Research Letters suggested that its effects were theoretically much greater than better-known sources of greenhouse gasses like carbon dioxide. As NF3 was not in widespread use at the time, it was not made part of the Kyoto Protocols and has been deemed "the missing greenhouse gas".

Kawamoto, H. (2012). "The Inventors of TFT Active-Matrix LCD Receive the 2011 IEEE Nishizawa Medal". Journal of Display Technology. 8 (1): 3–4. Bibcode:2012JDisT...8....3K. doi:10.1109/JDT.2011.2177740. ISSN 1551-319X.

Explanation of CCFL backlighting details, "Design News — Features — How to Backlight an LCD" Archived January 2, 2014, at the Wayback Machine, Randy Frank, Retrieved January 2013.

Energy Efficiency Success Story: TV Energy Consumption Shrinks as Screen Size and Performance Grow, Finds New CTA Study; Consumer Technology Association; press release 12 July 2017; https://cta.tech/News/Press-Releases/2017/July/Energy-Efficiency-Success-Story-TV-Energy-Consump.aspx Archived November 4, 2017, at the Wayback Machine

LCD Television Power Draw Trends from 2003 to 2015; B. Urban and K. Roth; Fraunhofer USA Center for Sustainable Energy Systems; Final Report to the Consumer Technology Association; May 2017; http://www.cta.tech/cta/media/policyImages/policyPDFs/Fraunhofer-LCD-TV-Power-Draw-Trends-FINAL.pdf Archived August 1, 2017, at the Wayback Machine

New Cholesteric Colour Filters for Reflective LCDs; C. Doornkamp; R. T. Wegh; J. Lub; SID Symposium Digest of Technical Papers; Volume 32, Issue 1 June 2001; Pages 456–459; http://onlinelibrary.wiley.com/doi/10.1889/1.1831895/full

K. H. Lee; H. Y. Kim; K. H. Park; S. J. Jang; I. C. Park & J. Y. Lee (June 2006). "A Novel Outdoor Readability of Portable TFT-LCD with AFFS Technology". SID Symposium Digest of Technical Papers. 37 (1): 1079–1082. doi:10.1889/1.2433159. S2CID 129569963.

Jack H. Park (January 15, 2015). "Cut and Run: Taiwan-controlled LCD Panel Maker in Danger of Shutdown without Further Investment". www.businesskorea.co.kr. Archived from the original on May 12, 2015. Retrieved April 23, 2015.

NXP Semiconductors (October 21, 2011). "UM10764 Vertical Alignment (VA) displays and NXP LCD drivers" (PDF). Archived from the original (PDF) on March 14, 2014. Retrieved September 4, 2014.

"Samsung to Offer "Zero-PIXEL-DEFECT" Warranty for LCD Monitors". Forbes. December 30, 2004. Archived from the original on August 20, 2007. Retrieved September 3, 2007.

"Display (LCD) replacement for defective pixels – ThinkPad". Lenovo. June 25, 2007. Archived from the original on December 31, 2006. Retrieved July 13, 2007.

Explanation of why pulse width modulated backlighting is used, and its side-effects, "Pulse Width Modulation on LCD monitors", TFT Central. Retrieved June 2012.

An enlightened user requests Dell to improve their LCD backlights, "Request to Dell for higher backlight PWM frequency" Archived December 13, 2012, at the Wayback Machine, Dell Support Community. Retrieved June 2012.

Oleg Artamonov (January 23, 2007). "Contemporary LCD Monitor Parameters: Objective and Subjective Analysis". X-bit labs. Archived from the original on May 16, 2008. Retrieved May 17, 2008.

ITD industrial monitor LCD displays are fully-integrated‚ waterproof and dustproof that combine high-performance different touch screen technologies in industrial-grade TFT-LCD flat panels, with sleek, IP65 / NEMA 4-4 x Ingress rating flat front surface industrial design. ITD industrial display monitors provide reliability, durability, and long expected product life. Impervious to environmental conditions such as liquid spills, splashes and wash-downs, these screens are the most contamination-resistant units available in the market. ITD industrial IP65/ NEMA 4 touch display monitors are designed for process control, food processing equipment, machine