lcd touch screen hdmi free sample

Insert the TF Card to Raspberry Pi, connect the Raspberry Pi and LCD by HDMI cable; connect USB cable to one of the four USB ports of Raspberry Pi, and connect the other end of the USB cable to the USB port of the LCD; then supply power to Raspberry Pi; after that if the display and touch both are OK, it means drive successfully (please use the full 2A for power supply).

After execution, the driver will be installed. The system will automatically restart, and the display screen will rotate 90 degrees to display and touch normally.

The resolution of the LCD display is 800 x 480, you can configure the resolution via software, and the maximum resolution it supports is 1920 x 1080. It is a USB capacitive touch screen and does not require a driver. It supports five touch control, besides that, the LCD screen comes with an OSD menu adjustment function. You can adjust the contrast, brightness, and switch button. There are 9 interfaces on the back of the screen, one earphone for audio output; two touches (USB connector), for power supply and touch output; one display, an HDMI interface, for connecting the motherboard and LCD display. One power, it can control the backlight to turn on and turn off to save power. One return, it’s only useful in the OSD menu. One right/down, backlight shortcut key. One left/up, backlight shortcut key. A menu, it’s useful in the OSD setting menu, open the OSD/ select key.

This 11.9-inch HDMI LCD has a 320 X 1480p IPS capacitive touch screen. This LDC is compatible with Raspberry Pi, Mini PCs, and NVIDIA Jetson Nano. It also has an integrated USB and HDMI interface support. Its 6H toughened glass touch panel has a 5-point touch IPS display.

OS Compatibility (Raspberry Pi): functional with Raspbian (5-Touch or Driver Free) and Kali, Win10 IoT (Single-Touch or Driver Free) and Retropie (Driver Free), and Ubuntu

In case you have connected the same PC monitor with other display units, ensure that you use this LCD as the main display unit. Since this will be the only display unit that would control the cursor operating on other connected display units.

You might need an external 5V/2A power supply if you observe that the LCD is flickering. It is probable to occur if the USB cable, connected to the computer, is unable to supply adequate power.

Smart lcd display 7 inch Resistance+ Touch+ Screen+ LCD+ Raspberry pi +HDMI Support Raspberry Pi, BB Black, Banana Pi and other mainstream mini PC Can be used as general-purpose-use HDMI monitor, for example: connect with oca computer HDMI as the sub-display Used as a raspberry pi display that supports Raspbian, Ubuntu, Kali-Linux, Kodi, win10 IOT, single-touch, free drive Work as a PC monitor, support win7, win8, win10 system 5 point touch (XP and older version system: single-point touch).

7 inch mini HDMI monitor with HD 1024x600 resolution. This small LCD screen upgrades to IPS screen with larger visible angle and better image quality.

Plug and play, as easy as plugging micro USB cable for touch and power supply, HDMI cable for displaying, both cables included in the package, no driver needed.

The USB capacitive touch control is for Windows and raspberry pi system, free-driver, just connect the 7” screen by the USB port of the computer/ Raspberry Pi.

Can be used as a general-purpose 7 inch HDMI screen connected to your TV box, game console, or mounted inside your PC case as temperature stat panel display, etc.

Supports PC with HDMI port:Used as a small second monitor for laptop which has Win7, Win8, Win10 system, 5 point touch (XP and older version system: single-point touch), free drive.

Supports PC with HDMI port:Used as a small second monitor for laptop which has Win7, Win8, Win10 system, 5 point touch (XP and older version system: single-point touch), free drive.

Connected to RPI 4: Connect to HDMI 0 port when working with Raspberry Pi 4.(Just power the screen by the USB port of the pi if you want to get the touch function available)

Connected to RPI 4:Connect to HDMI 0 port when working with Raspberry Pi 4.(Just power the screen by the USB port of the pi if you want to get the touch function available)

10.1inch lanscape screen, wide temperature -30~+80 , 1000nits, high brightness, sunlight readable, USB touch panel, I2C touch screen, HDMI board, 10.1 inch LCD display, 10.1"" display, 1280x800, 40pin, LVDS interface, Free/All/Wide viewing ang

There is a easy way to setup resolution of your screen by a shell script, you can download the scripts by git tool and use it to change resolution for your screens as following steps:

Answer: You need to plug the microUSB cable to the data microUSB port which is close to the standard USB port. it is far away from the HDMI cable.

If the touch function does not work properly, or no respond, please try another MicroUSB cable which supports data transfer, you can also connect extra power cable.