vesa touch screen monitor manufacturer

Touch Think VESA mount touch screen monitors with IP65 rated dustproof and waterproof make them widely used in a variety of applications. Especially, the front waterproof features are popular in industrial sites. Far more, our VESA mount monitors also support fully IP65 protection customization.

Due to the particularity of the use environment, the industrial monitors need to run for a long time, or even without shutting down for a 24/7 long time, which need the monitors to run for a long time and can maintain stability and reliable lifespan.

VESA mount industrial touch monitors are widely used in digital factories" smart production lines. And there is a variety of equipment are installed in workshops, thus release much electromagnetic and cause signal interference. Electromagnetic interference not only affects the normal operation of electronic equipment but even causes damage to certain components in electronic equipment.

Our industrial displays have passed the electromagnetic compatibility test and certification to ensure work normally without the surrounding electromagnetic interference. At the same time, the monitors also ensure that they won"t cause electromagnetic interference to other surrounding equipment and affect the normal operation of other equipment.

Touch Think industrial touch monitors support VESA 75/100mm installation. The VESA mount monitor is composed of a display, a cantilever, and a control panel, and supports a variety of coupling connectors for cantilever support profiles, which is suitable for most factory use scenarios.

Compared with the traditional installation, VESA mount monitors have the advantages of being beautiful, practical, strong applicability, easy to use, etc.

A touchscreen monitor incorporates the function of the pointing device into the display, replacing both mouse and keyboard. Interaction with the computer takes place via a system which detects contact with the screen surface.

Resistive screens are differentiated by the number of wires they have. The five-wire system compensates for their fragility, making them more durable and less prone to scratches and cracks.

Capacitive models respond to the transfer of electrical charges when touched, and cannot be used while wearing a glove. They are very bright, but have a fragile surface coating. Projected capacitive versions take advantage of the proximity transfer effect. Their surface is protected by reinforced glass.

Infrared technology uses light detection, the screen responding even before it is touched. However, it offers limited resolution and is prone to accidental activation. The most common type is the surface acoustic wave (SAW) screen. It responds to a wide variety of touch techniques, some screens even taking into account the amount of pressure applied. It is very bright and has excellent resolution.

In addition to size and resolution, choice of touchscreen will depend on the conditions under which it will be used and the possible need for multi-touch capability.

A touch screen display can be found nearly everywhere. You interact with a touchscreen monitor constantly; they have become very commonplace in our daily lives. Cell phones, ATM’s,kiosks, ticket vending machines,manufacturing plantsand more all use touchscreen monitors. Touch displays enable the user to interact with a computer, control system or device without the use of a keyboard or mouse.

TRU-Vu Monitors offers a wide range of industrial touch screen display monitors, including  Sunlight Readable touch screens, panel mount touch monitors and Medical touch screens with P-Cap touch. We also offer Resistive touch, Capacitive touch, SAW touch,  and IR industrial touch panels, with USB and RS-232 interfaces. New models are HID Compliant, eliminating the need to load drivers. We provide the best heavy duty LCD touch screen panels for industrial use; all are TAA-Compliant.  Which one Is right for you?

The most important decision in choosing the best touch screen display for your application will be the type of touch technology screens to use. There are five major types of touch screens, each with its own advantages and disadvantages.  Some have multi touch capability. All are TAA-Compliant touch screens. The 5 major types of touch screen technology are:

Touch screens will obviously require cleaning and disinfecting due to the high number of contact and touch points. Special care must be taken not to damage the touch screen display face, especially for 5-wire resistive touchscreen monitors. Their surface can easily be permanently damaged by corrosive cleaning agents (bleach, ammonia, etc.) or abrasive materials (dirty cloths, steel wool). Please see ourmonitor cleaning guidelines, andmonitor COVID-disinfecting guidelinesfor more specific details. These guidelines will help ensure you keep your touch screens clean, and safely disinfected from germs or viruses.

MON1010APH, Industrial Touchscreen and Monitors, Capacitive Touch Monitors, 10_4", 1024x768, Plastic, Black Steel Chassis, 32F-140F, CE, FCC Class B, RoHS,

MON1012APH, Industrial Touchscreen and Monitors, Capacitive Touch Monitors, 12.1", 1024x768, Plastic, Black Steel Chassis, 32F-140F, CE, FCC Class B, RoHS,

industrial_touchscreen_and_monitors, 12.1_inch, 1024_x_768, 01_DisplayPort, 01_HDMI_port, black, 800-999, 32F_to_140F, VGA_port, DVI_port, High Brightness

MON1015APH, Industrial Touchscreen and Monitors, Capacitive Touch Monitors, 15.0", 1024x768, Plastic, Black Steel Chassis, 32F-140F, CE, FCC Class B, RoHS,

industrial_touchscreen_and_monitors, 15.0_inch, 1024_x_768, 01_DisplayPort, 01_HDMI_port, black, 32F_to_140F, 800-999, VGA_port, DVI_port, High Brightness

MON1017APH, Industrial Touchscreen and Monitors, Capacitive Touch Monitors, 17.0", 1024x768, Plastic, Black Steel Chassis, 32F-140F, CE, FCC Class B, RoHS,

MON1021APH, Industrial Touchscreen and Monitors, Capacitive Touch Monitors, 21.5", 1024x768, Plastic, Black Steel Chassis, 32F-140F, CE, FCC Class B, RoHS,

industrial_touchscreen_and_monitors, 21.5_inch, 1024_x_768, 01_DisplayPort, 01_HDMI_port, black, 32F_to_140F, VGA_port, DVI_port, 1000+, High Brightness

MON1010AP, Industrial Touchscreen and Monitors, Capacitive Touch Monitors, 10.4", 1024x768, Plastic, Black Steel Chassis, 32F-140F, CE, FCC Class B, RoHS, industrial_touchscreen_and_monitors, 10.4_inch, 1024_x_768, 01_DisplayPort, 01_HDMI_port, black, VGA_port, DVI_port, 32F_to_140F

MON1012AP, Industrial Touchscreen and Monitors, Capacitive Touch Monitors, 12.1", 1024x768, Plastic, Black Steel Chassis, 32F-140F, CE, FCC Class B, RoHS, industrial_touchscreen_and_monitors, 12.1_inch, 1024_x_768, 01_DisplayPort, 01_HDMI_port, black, VGA_port, DVI_port, 32F_to_140F

MON1015AP, Industrial Touchscreen and Monitors, Capacitive Touch Monitors, 15.0", 1024x768, Plastic, Black Steel Chassis, 32F-140F, CE, FCC Class B, RoHS, industrial_touchscreen_and_monitors, 15.0_inch, 1024_x_768, 01_DisplayPort, 01_HDMI_port, black, VGA_port, DVI_port, 32F_to_140F

MON1017AP, Industrial Touchscreen and Monitors, Capacitive Touch Monitors, 17.0", 1024x768, Plastic, Black Steel Chassis, 32F-140F, CE, FCC Class B, RoHS, industrial_touchscreen_and_monitors,

MON1019AP, Industrial Touchscreen and Monitors, Capacitive Touch Monitors, 19.0", 1024x768, Plastic, Black Steel Chassis, 32F-140F, CE, FCC Class B, RoHS,

MON1021AP, Industrial Touchscreen and Monitors, Capacitive Touch Monitors, 21.5", 1024x768, Plastic, Black Steel Chassis, 32F-140F, CE, FCC Class B, RoHS, industrial_touchscreen_and_monitors, 21.5_inch, 1920_x_1080, 01_DisplayPort, 01_HDMI_port, black, VGA_port, DVI_port, 32F_to_140F

1000 nits, 1 M12 USB (touch control), 1 M12 VGA, 1 M12 8-pin OSD; 316 Stainless Steel Chassis IP66 all sides rating, -20 ~ 60C Operating Temperature

Projected Capacitive touch technology measures the capacitance at each electrode in the touchscreen grid, this capacitance is affected when you finger, or stylus, is nearby which means these screens can be used with any type of thin glove.

Typical Capacitive touch screens (also known as Surface Capacitive or non-projected) have an extremely small amount of electrical charge on the glass surface. When you touch the glass with your finger, stylus, or material that can hold a charge, a small amount of electrical charge transfers from the glass to your finger or stylus. The touchscreen senses the decrease in capacitance and detects where you pressed on the screen. This type of touchscreen cannot be used with thin latex gloves for example since latex does not hold a charge.

See article "Why use a Capacitive Touch Screen PC in an Industrial Application?" for more information on uses for capacitive touchscreens in industrial applications.

Industrial High Brightness touchscreen LCD displays deliver enhanced display performance with professional-grade panels. 1,000 nits" brightness and high contrast ratios are ideal for applications in Industrial Automation, Healthcare, Banking, Retail and Transportation and environments with heavy with ambient light.

Our C1D2 Industrial Monitors for hazardous locations are ATEx, IECEx certified. These industrial monitors are perfect for applications in oil, gas, petrochemical, and mining. With a high performance optically bonded, capacitive touchscreen that feature 1000nits*, these units are perfect for your light intensive environments. Choose from 15" or 19" to fit your environment and application needs.

Our Extended Temperature Monitors meet strict requirements for food and beverage, medical, and pharmaceutical industries. These rugged units are rated -20c to +60c and feature an optically bonded, capacitive touchscreens with 1000nits for your light intensive environments. Choose from a sleek aluminum or stainless-steel enclosure. Class 1, Division 2 options available.

AG Neovo TX-Series interactive touch screens offer comprehensive options for business purposes. They utilize Projected Capacitive (PCAP) technology for fast and accurate response. The glass screen with front IP65-rated protection, metal casing and flexible mounting options serve users’ multiple applications, from retail and restaurant to corporate offices and industrial workplaces.

Industrial Display Systems provide a wide range of reliable displays from 5.7" to 55" including LCD displays, touch screen panels, outdoor displays and digital signage displays, and a series of industrial monitors including open frame monitors and panel mount monitors, which work perfectly with embedded boards and systems to fulfill various application needs.

Science fiction has always served as a window into a potential future, namely in the way of technology. But what was once regulated to episodes of Star Trek is quickly becoming the stuff of reality. Many fixtures of these kinds of shows and books have begun to inspire real-life counterparts, including - but not limited to - touchscreen technology.

One only has to look at how far cell phones have come since their inception. Physical keyboards, like those from BlackBerry, gave people about as much of a solution as is possible for those who found themselves doing more on the devices as they became more advanced. Where tactile options came up short, touchscreens graciously stepped up to bat, providing a much fuller experience. This kind of functionality then spread to tablets, which are considered by many to be rivals of laptops and even standard PCs.

While there are still some things that are best done on a desktop computer, that does not change the fact that many users find themselves longing for the same abilities on their PCs afforded by many of their mobile devices. This is what helped breed the touchscreen monitor market, which has many viable options for people seeking the best of both worlds. With stronger computing power and a finer ability to control actions occurring in the screen, users can get more work done in new and exciting ways.

Traditionally, computer mice are what have allowed us to "touch" in a virtual context, but touchscreen monitors are changing all that. It might be said that the reason that mice were used in the first place was because the technology had not evolved to a responsive enough level to enable that natural solution. Now that people have the touchscreen technology, they want it everywhere.

If one thing is for certain, it is that the burgeoning adoption of touchscreen technology is no fad. Proliferation has already come too far to turn back now, and computer manufacturers are taking notice. Everyone is trying to get a piece of the action, including ELO Touch Solutions, Laiputuo Electronics, Planar, HP, 3M, Touch Systems, ViewSonic, Dell and ACER as well. Getting into the touchscreen monitor game is a no-brainer for the companies involved in this generation of computing. With so many different applications made for touchscreen monitors, options exist for all sorts of interested parties.

Touchscreen monitors are becoming the new standard in both private and enterprise settings. Here are some of the ways they can be leveraged effectively for business: touchscreen monitors for workstations, touchscreen monitors for hospitals, and touchscreen monitors for POS systems.

Newegg offers a large selection of touchscreen monitors which vary according to the type from 5-wire Resistive touchscreen monitors, and Accu Touch touchscreen monitors, to Capacitive touchscreen monitors, and more. Newegg’s wide selections will definitely meet your needs.

Settings: Brightness, Contrast, Clock, Phase, H-position, V-position, Auto-Adjust, Aspect Ratio, Sharpness, Color Temperature, OSD Timeout, OSD Language, Volume, Mute, Recall Defaults, Audio Select, Power LED ON/OFF, Touch Thru