reference design for tft lcd panel supplier

Digital Blocks TFT LCD Controller reference design enables you to accelerate the design-in of TFT LCD panel displays in your system. The reference design centers on the Digital Blocks DB9000AVLN TFT LCD Controller intellectual property (IP) core, which is available in netlist or VHDL/Verilog HDL register transfer level (RTL) formats.

The DB9000AVLN core contains an Avalon® Memory-Mapped system interconnect for interfacing to the Nios® II embedded processor and SDRAM or SRAM controllers (either memory can serve as the frame buffer). Software supplied with this reference design runs on the Nios II embedded processor to place an image in the frame buffer memory and invokes the DB9000AVLN core to drive the LCD panel.

Using the Intel® Quartus® Design Software, you can instantiate the TFT LCD Controller reference design in a Cyclone®, Cyclone® II, or Cyclone® III FPGA development kit. See the Demonstrated Intel® Technology section for a complete list of supported Intel® FPGA development kits.

You can connect your LCD panel to the Intel FPGA development kit with the fabrication of an appropriate cable. Please contact Digital Blocks for more details.

Check stock levels and buy from the industries" leading suppliers with live Distributor Stock Levels & Pricing. Manufacturers can have their products and documents listed with us completely free of charge. Distributors can also have their inventory & pricing listed for free.

This reference design implements a video over LVDS solution for automotive infotainment applications.It highlights the support of multi-touch with haptic feedback: LCD backlight control: and ambient light sensing: without the introduction of dedicated support lines back to the host processor. This design is implemented using two boards. The main electronics board: SAT0059 is where the deserializer: microProcessor: backlight controller: haptics drivers and power supply are located. The LCD interface board: SAT0096: is a physical and electrical interface to a specific LCD panel. It connects to the SAT0059 through a Samtec board to board connector and provides connection points for the LCD panel: touchscreen: backlight connections and haptic drivers. The SAT0096 is designed for a Microtips UMSH-8596MD-20T display. If a different display is to be used: a new LCD Interface board would likely need to be designed.

TFT or Thin Film Transistor LCDs refer to the most innovative offerings in the LCD industry due to their enhanced display and performance capabilities. These LCDs are supplied by manufacturers focused on providing products with the best contrast, luminance, visibility, and more. Whether your design is medical, military, or industrial, TFT LCDs will maximize your final product’s quality and usability in a variety of conditions.

Work closely with an Edge LCD Solutions Specialist to determine the perfect display for your project – from ultra-mobile or industrial, to small, medium, or large size options, we supply many shapes and sizes of LCDs. We supply standard sizes and resolutions of LCD in these categories, as well as type-specific LCDs (monochrome or color, etc.). We can also recommend and supply the proper LCD controller board, inverter, LED driver, cables, touch screen, or other associated enhancement.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

The TFT LCD Controller Reference Design from Digital Blocks enables hardware designers to accelerate the design-in of TFT LCD panel displays into their system. The Reference Design centers on Digital Blocks DB9000AVLN TFT LCD Controller IP Core, which is available in Altera® netlist or Verilog RTL formats.

The DB9000AVLN contains an Altera Avalon® System Interconnect for interface to the NIOS® II processor and SDRAM or SRAM controllers. Either memory can serve as the Frame Buffer. Software supplied with the Reference Design runs on the NIOS®II processor to place an image in Frame Buffer memory and setup & invoke the DB9000AVLN to drive the LCD panel.

Utilizing Altera’s Quartus II tools, the Reference Design places into an Altera Cyclone, Stratix, or Arria series FPGA development kit. All Altera FPGAs are supported.

In addition to supporting the Altera Avalon System Interconnect, the DB9000 Family of TFT LCD Controllers IP Cores & Reference Designs can connect via Qsys. Likewise, the DB9000 family member with AXI interconnect — the DB9000AXI — can connect via the AMBA AXI.interconnect fabric to a ARM® Cortex™-A9 processor within the Cyclone V and Arria® V SoC FPGAs.

The new line of 3.5” TFT displays with IPS technology is now available! Three touchscreen options are available: capacitive, resistive, or without a touchscreen.

For over 20 years Newhaven Display has been one of the most trusted suppliers in the digital display industry. We’ve earned this reputation by providing top quality products, services, and custom design solutions to customers worldwide.

How do we do it? Our agile workforce – from engineers and developers to supply chain experts – work together to respond quickly to a dynamically changing market, customizing solutions to fit each customer’s unique requirements.

Showcase high quality graphics and images on our 800 x 480 7” TFT display! The DT070CTFT LCD module is an upgraded version to our DT070ATFT module. Compared to the previous model, this new 7 inch display offers improved viewing angle and brighter LEDs. The DT070CTFT also uses the Himax HX8264E + HX8664B display drivers. This LCD display is available with a resistive or capacitive touchscreen panel.