check lcd panel manufacturer android quotation

Fixing a broken Android phone screen can cost anywhere from $100 to nearly $300. However, a DIY phone screen repair could cost$15 – $40. Expensive phones such as an iPhone 11 screen replacement costs $199 for an iPhone 11 display, $279 to replace an iPhone 11 Pro display and $329 to replace an iPhone 11 Pro Max screen.Android PhoneiPhone 11iPhone 11 ProiPhone 11 Pro Max$100 - $300$199$279$329

1. Hit Up with the ManufacturerIf your Android device is relatively new (read: still under manufacturer’s warranty), the first place you’ll want to go for your phone fix is the manufacturer. The price for a broken screen will vary depending on your device, but for a Samsung Galaxy S7 Edge you’re probably looking at around $270 plus a day or two without your device. Going to the manufacturer is almost always going to be more expensive than a third-party repair shop, but your warranty will stay intact and your phone will be fully restored (possibly even replaced with a fully refurbished model) to its pre-broken-screen excellence (and waterproof phones, like the Galaxy S7 Edge ($230 at Amazon), will retain their waterproof status). (Source: CNET)

Professional cell phone screen replacement services are offered by both manufacturers and third-party companies. You can find third-party cell phone repair services online and in local stores and shopping malls. Here are some popular cell phone screen replacement services:

How to Replace a Damaged Phone Screen Display – DIYThere are so many different mobile phone models on the market (either new or used) that providing a standardized guide is next to impossible. Additionally, some models cannot be repaired without sending them back to the manufacturer. Head to YouTube to check how your particular phone’s display can be replaced. You’ll find many detailed device-specific guides on the procedure.Most smartphones are essentially made up of several layers of components. Each layer must be carefully detached for the glass display to be replaced.These guides typically follow this procedure for replacing your smartphone display:Open the phone

Cost to repair Phone Screen varies according to the Model, Manufacturer and what option you choose. Considering the fact that your Smart Phone is a part of your daily life and you cannot imagine your day-to-day activities without it, screen repair cost should not hurt you. However, Smart Phones are getting pricier everyday and so are the repair costs. We hope you will find the above guide useful for Phone Screen Repair and related costs.

Many Android phones are a bit more durable than iPhones, but that doesn"t mean they"re immune to damage. Phone screens are made of glass, after all, and glass breaks when you drop it.

So. You dropped your Android phone for the 60th time and you now have a beautiful spider web pattern blooming across your home screen. If you don"t have month-to-month phone insurance, here are your options for getting it fixed -- or dealing with it.

If your Android device is relatively new (read: still under manufacturer"s warranty), the first place you"ll want to go for your phone fix is the manufacturer. The price for a broken screen will vary depending on your device, but for a Samsung Galaxy S7 Edge you"re probably looking at around $270 plus a day or two without your device. Going to the manufacturer is almost always going to be more expensive than a third-party repair shop, but your warranty will stay intact and your phone will be fully restored (possibly even replaced with a fully refurbished model) to its pre-broken-screen excellence (and waterproof phones, like the Galaxy S7 Edge

If your Android device is older (out of warranty) or a less popular model, you"ll probably be able to save money by going to a third-party repair shop. I called a few local repair shops in the Los Angeles area and got quotes for between $100 and $250 for a Samsung Galaxy S5

Some places will also offer a slightly lower price for repairing broken glass (as opposed to broken glass anda broken LCD) -- uBreakiFix, for example, charges $180 to repair the glass on an LG G5to repair the glass and the LCD on the same phone.

Using a third-party repair service to fix your device"s broken screen will almost certainly void your manufacturer"s warranty, so if your phone is new it"s best to first check out the manufacturer"s quote. Some new phones, like the Samsung Galaxy S7 Edge, are very difficult to repair, so you may find that the manufacturer has a better price than any reputable third-party service.

Founded in the year 2009, we “Sameer Interior & Decorator are a dependable and famous manufacturer of a broad range of Modular Kitchen, Wooden Wardrobe, Steelread more...

Help me understand....if sales are good on the device, why won"t supply companies manufacturer components only a few months into a release of your new device?Are you not confident in the product you put out to commit to another order of components?

LG Display has confirmed that it has switched OLED panel manufacturing across its Chinese and South Korean factories. Outlined in a statement to FlatpanelsHD, the company claims that it moved to using EX technology in all its OLED TV displays sometime during Q2 2022. For reference, OLED.EX panels utilise deuterium, which delivers two primary advantages over conventional OLED panels.

On the one hand, OLED.EX panels run more efficiently, which LG claims improved overall performance. On the other hand, the deuterium compounds in these panels allow LEDs to operate more brightly, with a quoted up to 30% higher peak brightness than LG Display’s OLED panels. OLED.EX panels can support thinner bezels too, with a 4 mm bezel possible surrounding a 65-inch display.

Unfortunately, the adoption of OLED.EX exclusive manufacturing for OLED TVs does not mean that all new Smart TVs will be sold with the new display technology. Instead, LG Display and its partners are likely to take a while before exhausting stock levels of existing panels. Still, LG Display’s transition should mean that almost all major Smart TV manufacturers, bar Samsung, will soon ship OLED.EX panels across their OLED ranges.

As you can tell from the photos, screen burn can make the display look discolored with darker pink or gray hues. Because of its gradual onset, many users don’t even realize their display has screen burn. If you would like to check for screen burn on your phone, put your phone on a white screen. A white screen will provide contrast making the discolored pixels more noticeable.

Android, Google, Google Play, Nexus and other marks are trademarks of Google LLC. The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License. Oreo is a trademark of Mondelez International, Inc. group.

Hundreds of inventory management, control, and tracking apps are available for iOS and Android devices, and we have chosen our top 36 apps based on their integration, scanning, and ease-of-use capabilities. While many of our top app choices are standalone in nature, some are extensions of inventory management software and are free to download with paid software subscriptions or purchases.

An iPhone, iPod, and Android inventory control app, CashierLive is not just for retailers. As an inventory management app, CashierLive scans barcodes or allows users to create unique codes to track and manage inventory.

Rapid Inventory, an inventory control app for Android devices, is simple to use on both smartphones and tablets. Business and industries easily operate the app with the support of external Bluetooth scanners.

Inventory Droid is an inventory management system for Android devices and phones. Ideal for small business use, Inventory Droid allows users to itemize their stock and track it.

An inventory tracking app, On Hand is designed for iPhone, iPad, iPod Touch, and Android devices. With support for Bluetooth scanners, On Hand is optimized for iPad and Android tablets, too.

An app from BerryWing Software, Scan to Spreadsheet creates spreadsheets using the barcode scanner in your iPhone or Android phone. A smart option for small businesses looking to save money with bring your own device (BYOD) barcode scanning and/or inventory, Scan to Spreadsheet is useful for inventory, cycle count, marketing event scanning, and other times when scanning to create a list is necessary.

Available for Android devices, Stock Controller is an inventory control and management app with plenty of tutorials to help you along the way. Never worry about losing inventory data again, because Stock Controller saves your data in the cloud.

Manage and track inventory easily with Inventory Counter, an app available for Android devices. Export inventory data to Excel, or export values by email or Dropbox with this app.

Instant Inventory is designed for small-scale businesses to manage their inventory, update stock, and record movement of items. Available for Android devices and 4-star rated with hundreds of reviews, Instant Inventory allows for barcode scanning.

IT Industrial’s Inventory Management is an app for Android devices that enables users to manage warehouse inventory on the go. Get a better handle on inventory and its associated transactions, including shipping, receiving, putaway, and picking with this inventory management app.

Inventory Management is an Android app that is updated frequently with new features. A simple, yet powerful app, Inventory Management enables users to manage items, manage transactions, search for items, and much more.

StockZure is a useful app available for iOS and Android devices. StockZure also is available as a web interface for advanced inventory reporting and management and works as a system with a barcode scanner or mobile phone using the StockZure app.

SAP Inventory Manager is a mobile app for iOS and Android devices. Users have all of the tools needed for improving and managing inventory levels and tracking item movement using the app and mobile devices with scanning capabilities. Please note, using the SAP Inventory Manager Mobile App requires being a user of SAP EAM with mobile services enabled by your IT department; however, interested users may try the app using sample data.

Zoho Inventory is a robust inventory management platform with a web-based interface as well as apps for both iOS and Android. A multi-channel inventory management system, Zoho Inventory integrates with Amazon, eBay, Etsy, and Shopify.

Whether you need a phone screen repair, LCD replacement, water damage diagnostic or clean-up or any of our professional services, you can always be sure that your device is being handled carefully by the most knowledgeable technicians in the industry. Our techs care about you as much as we care about your cell phone repair, so we will keep you updated on every aspect of the repair as it happens. No matter if you have a Samsung, Apple, Sony, LG or any other brand, for our professional techs, no device is too new or too complicated.

IPS (in-plane switching) is a screen technology for liquid-crystal displays (LCDs). In IPS, a layer of liquid crystals is sandwiched between two glass surfaces. The liquid crystal molecules are aligned parallel to those surfaces in predetermined directions (in-plane). The molecules are reoriented by an applied electric field, whilst remaining essentially parallel to the surfaces to produce an image. It was designed to solve the strong viewing angle dependence and low-quality color reproduction of the twisted nematic field effect (TN) matrix LCDs prevalent in the late 1980s.

The TN method was the only viable technology for active matrix TFT LCDs in the late 1980s and early 1990s. Early panels showed grayscale inversion from up to down,Vertical Alignment (VA)—that could resolve these weaknesses and were applied to large computer monitor panels.

Shortly thereafter, Hitachi of Japan filed patents to improve this technology. A leader in this field was Katsumi Kondo, who worked at the Hitachi Research Center.thin-film transistor array as a matrix and to avoid undesirable stray fields in between pixels.Super IPS). NEC and Hitachi became early manufacturers of active-matrix addressed LCDs based on the IPS technology. This is a milestone for implementing large-screen LCDs having acceptable visual performance for flat-panel computer monitors and television screens. In 1996, Samsung developed the optical patterning technique that enables multi-domain LCD. Multi-domain and in-plane switching subsequently remain the dominant LCD designs through 2006.

IPS technology is widely used in panels for TVs, tablet computers, and smartphones. In particular, most IBM products was marketed as CCFL backlighting, and all Apple Inc. products marketed with the label backlighting since 2010.

Most panels also support true 8-bit-per-channel colour. These improvements came at the cost of a lower response time, initially about 50 ms. IPS panels were also extremely expensive.

In this case, both linear polarizing filters P and A have their axes of transmission in the same direction. To obtain the 90 degree twisted nematic structure of the LC layer between the two glass plates without an applied electric field (OFF state), the inner surfaces of the glass plates are treated to align the bordering LC molecules at a right angle. This molecular structure is practically the same as in TN LCDs. However, the arrangement of the electrodes e1 and e2 is different. Because they are in the same plane and on a single glass plate, they generate an electric field essentially parallel to this plate. The diagram is not to scale: the LC layer is only a few micrometers thick and so is very small compared with the distance between the electrodes.

Unlike TN LCDs, IPS panels do not lighten or show tailing when touched. This is important for touch-screen devices, such as smartphones and tablet computers.

Toward the end of 2010 Samsung Electronics introduced Super PLS (Plane-to-Line Switching) with the intent of providing an alternative to the popular IPS technology which is primarily manufactured by LG Display. It is an "IPS-type" panel technology, and is very similar in performance features, specs and characteristics to LG Display"s offering. Samsung adopted PLS panels instead of AMOLED panels, because in the past AMOLED panels had difficulties in realizing full HD resolution on mobile devices. PLS technology was Samsung"s wide-viewing angle LCD technology, similar to LG Display"s IPS technology.

In 2012 AU Optronics began investment in their own IPS-type technology, dubbed AHVA. This should not be confused with their long standing AMVA technology (which is a VA-type technology). Performance and specs remained very similar to LG Display"s IPS and Samsung"s PLS offerings. The first 144 Hz compatible IPS-type panels were produced in late 2014 (used first in early 2015) by AUO, beating Samsung and LG Display to providing high refresh rate IPS-type panels.

"TFT Technology: Enhancing the viewing angle". Riverdi (TFT Module Manufacturer). Archived from the original on 23 April 2016. Retrieved 5 November 2016. However, [twisted nematic] suffers from the phenomenon called gray scale inversion. This means that the display has one viewing side in which the image colors suddenly change after exceeding the specified viewing angle. (see image Inversion Effect) External link in |quote= (help)

Baker, Simon (30 April 2011). "Panel Technologies: TN Film, MVA, PVA and IPS Explained". Tftcentral.co.uk. Archived from the original on 29 June 2017. Retrieved 13 January 2012.

As you can tell from the photos, screen burn can make the display look discolored with darker pink or gray hues. Because of its gradual onset, many users don’t even realize their display has screen burn. If you would like to check for screen burn on your phone, put your phone on a white screen. A white screen will provide contrast making the discolored pixels more noticeable.

Review and edit the contacts and companies that will appear on your quote. Contacts and companies associated with the deal will appear here by default. To remove them from the quote, clear the checkboxnext to their name.

To edit a line item that is already included on the quote, hover over the line item and click the Actions dropdown menu, then select Edit. Make any changes in the right panel, then click Save.

By default, billing for recurring line items will start that time of checkout. When a line item"s Billing frequencyis recurring, rather than one-time, you can set this to a future date by clicking the Billing start date dropdown menu, then selecting Custom. Then use the date picker to select a start date. Learn more about scheduling recurring payments to start in the future.

You can also share a quote using the HubSpot mobile keyboard on your Android or iOS device. Learn how to turn on the HubSpot keyboard in your device"s settings, then access the HubSpot keyboard while using the HubSpot mobile app.

If you can"t find your Android phone, enter find my phone to locate it on a map or make it ring. If you believe it"s been lost or stolen, you can also secure your device or erase all content from it.

For example, if I check for cat GIFs every day, the Past 24 hours filter will help me find only the newest cat GIFs. If I"m looking for recent research studies, I might apply the Past year filter. And if I"m looking for something very specific and know when it was published, I can use the Custom range filter to find content published within a specified timeframe.

.. (Two Periods)Separate numbers with two periods without spaces to search for numbers within that rangeFind phones that cost between $200 and $400: Android phone $200..$400. Find computer milestones that took place between 1950 and 2000: "computer milestones" 1950..2000

You can then search through your Evernote clips later right from Google"s search results. Type a query as you would normally, and if any of your clips in Evernote match that query, you"ll see those clips in a side panel of your Google Search results.

You learn, for example, how to work with the Accessibility Checker to tackle accessibility issues while you"re writing your document. You"ll also learn how to add alt texts to images so that people using screen readers are able to listen to what the image is all about. You can also learn about how to use fonts, colors, and styles to maximize the inclusiveness of your Word documents before sharing them with others.

The Accessibility Checker is a tool that reviews your content and flags accessibility issues it comes across. It explains why each issue might be a potential problem for someone with a disability. The Accessibility Checker also suggests how you can resolve the issues that appear.

In Word, the Accessibility Checker runs automatically in the background when you"re creating a document. If the Accessibility Checker detects accessibility issues, you will get a reminder in the status bar.

To manually launch the Accessibility Checker, select Review> Check Accessibility. The Accessibilitypane opens, and you can now review and fix accessibility issues. For more info, go to Improve accessibility with the Accessibility Checker and Check document accessibility.

Tip:Use the Accessibility Reminder add-in for Microsoft 365 to notify authors and contributors of accessibility issues in their documents. With the add-in, you can quickly add reminder comments that spread awareness of accessibility issues and encourage the use of the Accessibility Checker. For more info, go to Use the Accessibility Reminder to notify authors of accessibility issues.

Use the Accessibility Checker to analyze the document and find insufficient color contrast. The tool now checks the documents for text color against page color, table cell backgrounds, highlight, textbox fill color, paragraph shading, shape and SmartArt fills, headers and footers, and links.

The Accessibility Checker is a tool that reviews your content and flags accessibility issues it comes across. It explains why each issue might be a potential problem for someone with a disability. The Accessibility Checker also suggests how you can resolve the issues that appear.

In Word, the Accessibility Checker runs automatically in the background when you"re creating a document. If the Accessibility Checker detects accessibility issues, you will get a reminder in the status bar.

To manually launch the Accessibility Checker, select Review> Check Accessibility. The Accessibilitypane opens, and you can now review and fix accessibility issues. For more info, go to Improve accessibility with the Accessibility Checker and Check document accessibility.

Tip:Use the Accessibility Reminder add-in for Microsoft 365 to notify authors and contributors of accessibility issues in their documents. With the add-in, you can quickly add reminder comments that spread awareness of accessibility issues and encourage the use of the Accessibility Checker. For more info, go to Use the Accessibility Reminder to notify authors of accessibility issues.

Use the Accessibility Checker, to analyze the document and find insufficient color contrast. The tool now checks the documents for text color against page color, table cell backgrounds, highlight, textbox fill color, paragraph shading, shape and SmartArt fills, headers and footers, and links.

To find headings not using built-in styles, visually scan your document for text formatted to look like a heading. Select this text, and then look in the Home tab of the ribbon to check if a heading style has been used.

Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number.

Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number.

The type of the card wallet, one of amex_express_checkout, apple_pay, google_pay, masterpass, samsung_pay, or visa_checkout. An additional hash is included on the Wallet subhash with a name matching this value. It contains additional information specific to the card wallet type.

Request ability to increment this PaymentIntent if the combination of MCC and card brand is eligible. Check incremental_authorization_supported in the Confirm response to verify support.

Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number.

Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number.

The type of the card wallet, one of amex_express_checkout, apple_pay, google_pay, masterpass, samsung_pay, or visa_checkout. An additional hash is included on the Wallet subhash with a name matching this value. It contains additional information specific to the card wallet type.

Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number.

Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number.

The type of the card wallet, one of amex_express_checkout, apple_pay, google_pay, masterpass, samsung_pay, or visa_checkout. An additional hash is included on the Wallet subhash with a name matching this value. It contains additional information specific to the card wallet type.

Use on_session if you intend to only reuse the payment method when the customer is in your checkout flow. Use off_session if your customer may or may not be in your checkout flow. If not provided, this value defaults to off_session.

Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number.

The type of the card wallet, one of amex_express_checkout, apple_pay, google_pay, masterpass, samsung_pay, or visa_checkout. An additional hash is included on the Wallet subhash with a name matching this value. It contains additional information specific to the card wallet type.

Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number.

Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number.

uncheckedThe CVC was provided but hasn"t been checked yet. Checks are typically performed when attaching a card to a Customer object, or when creating a charge. For more details, see Check if a card is valid without a charge.passThe first address line provided is correct.

uncheckedThe first address line was provided but hasn"t been checked yet. Checks are typically performed when attaching a card to a Customer object, or when creating a charge. For more details, see Check if a card is valid without a charge.passThe ZIP code provided is correct.

uncheckedThe ZIP code was provided but hasn"t been checked yet. Checks are typically performed when attaching a card to a Customer object, or when creating a charge. For more details, see Check if a card is valid without a charge.Core Resources

Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number.

If a CVC was provided, results of the check: pass, fail, unavailable, or unchecked. A result of unchecked indicates that CVC was provided but hasn’t been checked yet. Checks are typically performed when attaching a card to a Customer object, or when creating a charge. For more details, see Check if a card is valid without a charge.

If the card number is tokenized, this is the method that was used. Can be android_pay (includes Google Pay), apple_pay, masterpass, visa_checkout, or null.

Reason given by cardholder for dispute. Possible values are bank_cannot_process, check_returned, credit_not_processed, customer_initiated, debit_not_authorized, duplicate, fraudulent, general, incorrect_account_details, insufficient_funds, product_not_received, product_unacceptable, subscription_canceled, or unrecognized. Read more about dispute reasons.

Occurs when a PaymentIntent has funds to be captured. Check the amount_capturable property on the PaymentIntent to determine the amount that can be captured. You may capture the PaymentIntent with an amount_to_capture value up to the specified amount. Learn more about capturing PaymentIntents.

Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number.

Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number.

The type of the card wallet, one of amex_express_checkout, apple_pay, google_pay, masterpass, samsung_pay, or visa_checkout. An additional hash is included on the Wallet subhash with a name matching this value. It contains additional information specific to the card wallet type.

Request ability to increment this PaymentIntent if the combination of MCC and card brand is eligible. Check incremental_authorization_supported in the Confirm response to verify support.

Set to true to indicate that the customer is not in your checkout flow during this payment attempt, and therefore is unable to authenticate. This parameter is intended for scenarios where you collect card details and charge them later. This parameter can only be used with confirm=true.

Request ability to increment this PaymentIntent if the combination of MCC and card brand is eligible. Check incremental_authorization_supported in the Confirm response to verify support.

Request ability to increment this PaymentIntent if the combination of MCC and card brand is eligible. Check incremental_authorization_supported in the Confirm response to verify support.

Set to true to indicate that the customer is not in your checkout flow during this payment attempt, and therefore is unable to authenticate. This parameter is intended for scenarios where you collect card details and charge them later.

Request ability to increment this PaymentIntent if the combination of MCC and card brand is eligible. Check incremental_authorization_supported in the Confirm response to verify support.

Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number.

Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number.

The type of the card wallet, one of amex_express_checkout, apple_pay, google_pay, masterpass, samsung_pay, or visa_checkout. An additional hash is included on the Wallet subhash with a name matching this value. It contains additional information specific to the card wallet type.

Use on_session if you intend to only reuse the payment method when the customer is in your checkout flow. Use off_session if your customer may or may not be in your checkout flow. If not provided, this value defaults to off_session.

Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number.

Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number.

The type of the card wallet, one of amex_express_checkout, apple_pay, google_pay, masterpass, samsung_pay, or visa_checkout. An additional hash is included on the Wallet subhash with a name matching this value. It contains additional information specific to the card wallet type.

The bank account has restrictions on either the type, or the number, of payouts allowed. This normally indicates that the bank account is a savings or other non-checking account.

If a CVC was provided, results of the check: pass, fail, unavailable, or unchecked. A result of unchecked indicates that CVC was provided but hasn’t been checked yet. Checks are typically performed when attaching a card to a Customer object, or when creating a charge. For more details, see Check if a card is valid without a charge.

Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number.

If the card number is tokenized, this is the method that was used. Can be android_pay (includes Google Pay), apple_pay, masterpass, visa_checkout, or null.

The government-issued secondary ID number of the individual, as appropriate for the representative’s country, will be used for enhanced verification checks. In Thailand, this would be the laser code found on the back of an ID card. Instead of the number itself, you can also provide a PII token created with Stripe.js.

The person’s secondary ID number, as appropriate for their country, will be used for enhanced verification checks. In Thailand, this would be the laser code found on the back of an ID card. Instead of the number itself, you can also provide a PII token provided by Stripe.js.

Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number.

Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number.

The type of the card wallet, one of amex_express_checkout, apple_pay, google_pay, masterpass, samsung_pay, or visa_checkout. An additional hash is included on the Wallet subhash with a name matching this value. It contains additional information specific to the card wallet type.

If this is a card PaymentMethod, this hash contains the user’s card details. For backwards compatibility, you can alternatively provide a Stripe token (e.g., for Apple Pay, Amex Express Checkout, or legacy Checkout) into the card hash with format card: {token: "tok_visa"}. When providing a card number, you must meet the requirements for PCI compliance. We strongly recommend using Stripe.js instead of interacting with this API directly.

If a CVC was provided, results of the check: pass, fail, unavailable, or unchecked. A result of unchecked indicates that CVC was provided but hasn’t been checked yet. Checks are typically performed when attaching a card to a Customer object, or when creating a charge. For more details, see Check if a card is valid without a charge.

Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number.

If the card number is tokenized, this is the method that was used. Can be android_pay (includes Google Pay), apple_pay, masterpass, visa_checkout, or null.Payment Methods

The Checkout session that this coupon is applied to, if it is applied to a particular session in payment mode. Will not be present for subscription mode.

Defaults to true. When set to false, this tax rate cannot be used with new applications or Checkout Sessions, but will still work for subscriptions and invoices that already have it set.

Flag determining whether the tax rate is active or inactive (archived). Inactive tax rates cannot be used with new applications or Checkout Sessions, but will still work for subscriptions and invoices that already have it set.

Flag determining whether the tax rate is active or inactive (archived). Inactive tax rates cannot be used with new applications or Checkout Sessions, but will still work for subscriptions and invoices that already have it set.

A with a data property that contains an array of up to limit shipping rates, starting after shipping rate starting_after. Each entry in the array is a separate shipping rate object. If no more shipping rates are available, the resulting array will be empty. This require should never an error.Checkout

Defaults to true. When set to false, this tax rate cannot be used with new applications or Checkout Sessions, but will still work for subscriptions and invoices that already have it set.

The URL to the Checkout Session. Redirect customers to this URL to take them to Checkout. If you’re using Custom Domains, the URL will use your subdomain. Otherwise, it’ll use checkout.stripe.com.

Otherwise, if the customer has consented to promotional content, this value is the most recent valid email provided by the customer on the Checkout form.

If the Checkout Session’s payment_method_types includes acss_debit, this hash contains the configurations that will be applied to each payment attempt of that type.

If the Checkout Session’s payment_method_types includes affirm, this hash contains the configurations that will be applied to each payment attempt of that type.

If the Checkout Session’s payment_method_types includes afterpay_clearpay, this hash contains the configurations that will be applied to each payment attempt of that type.

If the Checkout Session’s payment_method_types includes alipay, this hash contains the configurations that will be applied to each payment attempt of that type.

If the Checkout Session’s payment_method_types includes au_becs_debit, this hash contains the configurations that will be applied to each payment attempt of that type.

If the Checkout Session’s payment_method_types includes bacs_debit, this hash contains the configurations that will be applied to each payment attempt of that type.

If the Checkout Session’s payment_method_types includes bancontact, this hash contains the configurations that will be applied to each payment attempt of that type.

If the Checkout Session’s payment_method_types includes boleto, this hash contains the configurations that will be applied to each payment attempt of that type.

If the Checkout Session’s payment_method_types includes card, this hash contains the configurations that will be applied to each payment attempt of that type.

If the Checkout Session’s payment_method_types includes customer_balance, this hash contains the configurations that will be applied to each payment attempt of that type.

If the Checkout Session’s payment_method_types includes eps, this hash contains the configurations that will be applied to each payment attempt of that type.

If the Checkout Session’s payment_method_types includes fpx, this hash contains the configurations that will be applied to each payment attempt of that type.

If the Checkout Session’s payment_method_types includes giropay, this hash contains the configurations that will be applied to each payment attempt of that type.

If the Checkout Session’s payment_method_types includes grabpay, this hash contains the configurations that will be applied to each payment attempt of that type.

If the Checkout Session’s payment_method_types includes ideal, this hash contains the configurations that will be applied to each payment attempt of that type.

If the Checkout Session’s payment_method_types includes klarna, this hash contains the configurations that will be applied to each payment attempt of that type.

If the Checkout Session’s payment_method_types includes konbini, this hash contains the configurations that will be applied to each payment attempt of that type.

If the Checkout Session’s payment_method_types includes oxxo, this hash contains the configurations that will be applied to each payment attempt of that type.

If the Checkout Session’s payment_method_types includes p24, this hash contains the configurations that will be applied to each payment attempt of that type.

If the Checkout Session’s payment_method_types includes paynow, this hash contains the configurations that will be applied to each payment attempt of that type.

If the Checkout Session’s payment_method_types includes pix, this hash contains the configurations that will be applied to each payment attempt of that type.

If the Checkout Session’s payment_method_types includes sepa_debit, this hash contains the configurations that will be applied to each payment attempt of that type.

If the Checkout Session’s payment_method_types includes sofort, this hash contains the configurations that will be applied to each payment attempt of that type.

If the Checkout Session’s payment_method_types includes us_bank_account, this hash contains the configurations that will be applied to each payment attempt of that type.

Defaults to true. When set to false, this tax rate cannot be used with new applications or Checkout Sessions, but will still work for subscriptions and invoices that already have it set.

Defaults to true. When set to false, this tax rate cannot be used with new applications or Checkout Sessions, but will still work for subscriptions and invoices that already have it set.

will be used if it’s a card, and otherwise the most recent card will be used. A valid billing address, billing name and billing email are required on the payment method for Checkout to prefill the customer’s card details.

If blank for Checkout Sessions in payment or subscription mode, Checkout will create a new Customer object based on information provided during the payment flow.

You can set payment_intent_data.setup_future_usage to have Checkout automatically attach the payment method to the Customer you pass in for future reuse.

The Epoch time in seconds at which the Checkout Session will expire. It can be anywhere from 30 minutes to 24 hours after Checkout Session creation. By default, this value is 24 hours from creation.

Specify whether Checkout should collect a payment method. When set to if_required, Checkout will not collect a payment method when the total due for the session is 0.

A with a data property that contains an array of up to limit Checkout Sessions, starting after Checkout Session starting_after. Each entry in the array is a separate Checkout Session object. If no more Checkout Sessions are available, the resulting array will be empty.Checkout

When retrieving a Checkout Session, there is an includable line_items property containing the first handful of those items. There is also a URL where you can retrieve the full (paginated) list of line items.

A with a data property that contains an array of up to limit Checkout Session line items, starting after Line Item starting_after. Each entry in the array is a separate Line Item object. If no more line items are available, the resulting array will be empty.Payment Links

When a customer opens a payment link it will open a new checkout session to render the payment page. You can use checkout session events to track payments through payment links.Payment Links

Defaults to true. When set to false, this tax rate cannot be used with new applications or Checkout Sessions, but will still work for subscriptions and invoices that already have it set.

If set to required, it requires cutomers to accept the terms of service before being able to pay. If set to none, customers won’t be shown a checkbox to accept the terms of service.

An array of two-letter ISO country codes representing which countries Checkout should provide as options for shipping locations. Unsupported country codes: AS, CX, CC, CU, HM, IR, KP, MH, FM, NF, MP, PW, SD, SY, UM, VI.

Set of key-value pairs that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to metadata. Metadata associated with this Payment Link will automatically be copied to checkout sessions created by this payment link.

The URL the customer will be redirected to after the purchase is complete. You can embed {CHECKOUT_SESSION_ID} into the URL to have the id of the completed checkout session included.

If Checkout does not create a Customer, the payment method is not attached to a Customer. To reuse the payment method, you can retrieve it from the Checkout Session’s PaymentIntent.

When processing card payments, Checkout also uses setup_future_usage to dynamically optimize your payment flow and comply with regional legislation and network rules, such as SCA.

Specify whether Checkout should collect a payment method. When set to if_required, Checkout will not collect a payment method when the total due for the session is 0.This may occur if the Checkout Session includes a free trial or a discount.

Set of key-value pairs that you can attach to an object. This can be useful for storing additional information about the object in a structured format. Individual keys can be unset by posting an empty value to them. All keys can be unset by posting an empty value to metadata. Metadata associated with this Payment Link will automatically be copied to checkout sessions created by this payment link.

The URL the customer will be redirected to after the purchase is complete. You can embed {CHECKOUT_SESSION_ID} into the URL to have the id of the completed checkout session included.

Specify whether Checkout should collect a payment method. When set to if_required, Checkout will not collect a payment method when the total due for the session is 0.This may occur if the Checkout Session includes a free trial or a discount.

Defaults to true. When set to false, this tax rate cannot be used with new applications or Checkout Sessions, but will still work for subscriptions and invoices that already have it set.

Defaults to true. When set to false, this tax rate cannot be used with new applications or Checkout Sessions, but will still work for subscriptions and invoices that already have it set.

Defaults to true. When set to false, this tax rate cannot be used with new applications or Checkout Sessions, but will still work for subscriptions and invoices that already have it set.

Defaults to true. When set to false, this tax rate cannot be used with new applications or Checkout Sessions, but will still work for subscriptions and invoices that already have it set.

Defaults to true. When set to false, this tax rate cannot be used with new applications or Checkout Sessions, but will still work for subscriptions and invoices that already have it set.

Defaults to true. When set to false, this tax rate cannot be used with new applications or Checkout Sessions, but will still work for subscriptions and invoices that already have it set.

Defaults to true. When set to false, this tax rate cannot be used with new applications or Checkout Sessions, but will still work for subscriptions and invoices that already have it set.

Defaults to true. When set to false, this tax rate cannot be used with new applications or Checkout Sessions, but will still work for subscriptions and invoices that already have it set.

Defaults to true. When set to false, this tax rate cannot be used with new applications or Checkout Sessions, but will still work for subscriptions and invoices that already have it set.

Defaults to true. When set to false, this tax rate cannot be used with new applications or Checkout Sessions, but will still work for subscriptions and invoices that already have it set.

Defaults to true. When set to false, this tax rate cannot be used with new applications or Checkout Sessions, but will still work for subscriptions and invoices that already have it set.

Defaults to true. When set to false, this tax rate cannot be used with new applications or Checkout Sessions, but will still work for subscriptions and invoices that already have it set.

Defaults to true. When set to false, this tax rate cannot be used with new applications or Checkout Sessions, but will still work for subscriptions and invoices that already have it set.

By default, upon subscription cancellation, Stripe will stop automatic collection of all finalized invoices for the customer. This is intended to prevent unexpected payment attempts after the customer has canceled a subscription. However, you can resume automatic collection of the invoices manually after subscription cancellation to have us proceed. Or, you could check for unpaid invoices before allowing the customer to cancel the subscription at all.

Defaults to true. When set to false, this tax rate cannot be used with new applications or Checkout Sessions, but will still work for subscriptions and invoices that already have it set.

Defaults to true. When set to false, this tax rate cannot be used with new applications or Checkout Sessions, but will still work for subscriptions and invoices that already have it set.

Defaults to true. When set to false, this tax rate cannot be used with new applications or Checkout Sessions, but will still work for subscriptions and invoices that already have it set.

Defaults to true. When set to false, this tax rate cannot be used with new applications or Checkout Sessions, but will still work for subscriptions and invoices that already have it set.

If a CVC was provided, results of the check: pass, fail, unavailable, or unchecked. A result of unchecked indicates that CVC was provided but hasn’t been checked yet. Checks are typically performed when attaching a card to a Customer object, or when creating a charge. For more details, see Check if a card is valid without a charge.

If the card number is tokenized, this is the method that was used. Can be android_pay (includes Google Pay), apple_pay, masterpass, visa_checkout, or null.

(ID of a file upload) A logo for the account that will be used in Checkout instead of the icon and without the account’s name next to it if provided. Must be at least 128px x 128px.

The government-issued secondary ID number of the individual, as appropriate for the representative’s country, will be used for enhanced verification checks. In Thailand, this would be the laser code found on the back of an ID card. Instead of the number itself, you can also provide a PII token created with Stripe.js.

One or more documents that support the Bank account ownership verification requirement. Must be a document associated with the account’s primary active bank account that displays the last 4 digits of the account number, either a statement or a voided check.

(ID of a file upload) A logo for the account that will be used in Checkout instead of the icon and without the account’s name next to it if provided. Must be at least 128px x 128px.

The government-issued secondary ID number of the individual, as appropriate for the representative’s country, will be used for enhanced verification checks. In Thailand, this would be the laser code found on the back of an ID card. Instead of the number itself, you can also provide a PII token created with Stripe.js.

One or more documents that support the Bank account ownership verification requirement. Must be a document associated with the account’s primary active bank account that displays the last 4 digits of the account number, either a statement or a voided check.

(ID of a file upload) A logo for the account that will be used in Checkout instead of the icon and without the account’s name next to it if provided. Must be at least 128px x 128px.

If a CVC was provided, results of the check: pass, fail, unavailable, or unchecked. A result of unchecked indicates that CVC was provided but hasn’t been checked yet. Checks are typically performed when attaching a card to a Customer object, or when creating a charge. For more details, see Check if a card is valid without a charge.

Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number.

If the card number is tokenized, this is the method that was used. Can be android_pay (includes Google Pay), apple_pay, masterpass, visa_checkout, or null.Connect

The person’s secondary ID number, as appropriate for their country, will be used for enhanced verification checks. In Thailand, this would be the laser code found on the back of an ID card. Instead of the number itself, you can also provide a PII token provided by Stripe.js.

The person’s secondary ID number, as appropriate for their country, will be used for enhanced verification checks. In Thailand, this would be the laser code found on the back of an ID card. Instead of the number itself, you can also provide a PII token provided by Stripe.js.

The bank account has restrictions on either the type or number of transfers allowed. This normally indicates that the bank account is a savings or other non-checking account.

The destination bank account has restrictions on either the type or number of transfers allowed. This normally indicates that the bank account is a savings or other non-checking account.

The destination bank account has restrictions on either the type or number of transfers allowed. This normally indicates that the bank account is a savings or other non-checking account.

The destination bank account has restrictions on either the type or number of transfers allowed. This normally indicates that the bank account is a savings or other non-checking account.

The bank account has restrictions on either the type or number of transfers allowed. This normally indicates that the bank account is a savings or other non-checking account.

The destination bank account has restrictions on either the type or number of transfers allowed. This normally indicates that the bank account is a savings or other non-checking account.

The destination bank account has restrictions on either the type or number of transfers allowed. This normally indicates that the bank account is a savings or other non-checking account.

The destination bank account has restrictions on either the type or number of transfers allowed. This normally indicates that the bank account is a savings or other non-checking account.

The bank account has restrictions on either the type or number of transfers allowed. This normally indicates that the bank account is a savings or other non-checking account.

The destination bank account has restrictions on either the type or number of transfers allowed. This normally indicates that the bank account is a savings or other non-checking account.

The destination bank account has restrictions on either the type or number of transfers allowed. This normally indicates that the bank account is a savings or other non-checking account.

The destination bank account has restrictions on either the type or number of transfers allowed. This normally indicates that the bank account is a savings or other non-checking account.

The destination bank account has restrictions on either the type or number of transfers allowed. This normally indicates that the bank account is a savings or other non-checking account.

The destination bank account has restrictions on either the type or number of transfers allowed. This normally indicates that the bank account is a savings or other non-checking account.

The destination bank account has restrictions on either the type or number of transfers allowed. This normally indicates that the bank account is a savings or other non-checking account.

The destination bank account has restrictions on either the type or number of transfers allowed. This normally indicates that the bank account is a savings or other non-checking account.

The bank account has restrictions on either the type or number of transfers allowed. This normally indicates that the bank account is a savings or other non-checking account.

The bank account has restrictions on either the type or number of transfers allowed. This normally indicates that the bank account is a savings or other non-checking account.

The destination bank account has restrictions on either the type or number of transfers allowed. This normally indicates that the bank account is a savings or other non-checking account.

The user declined to be verified by Stripe. Check with your legal counsel to see if you have an obligation to offer an alternative, non-biometric means to verify, such as through a manual review.

Array of strings of allowed identity document types. If the provided identity document isn’t one of the allowed types, the verification check will fail with a document_type_not_allowed error code.

Array of strings of allowed identity document types. If the provided identity document isn’t one of the allowed types, the verification check will fail with a document_type_not_allowed error code.

Array of strings of allowed identity document types. If the provided identity document isn’t one of the allowed types, the verification check will fail with a document_type_not_allowed error code.

Array of strings of allowed identity document types. If the provided identity document isn’t one of the allowed types, the verification check will fail with a document_type_not_allowed error code.