how do i know if my lcd screen is broken supplier

However, if the digitizer or LCD is also damaged during a fall, that screen no longer carries value because it cannot be refurbished. Repair shops cannot sell broken LCDs to refurbishing companies; therefore, they cannot offset the cost of an LCD repair. That is why repair stores often charge a little extra if there is damage to the LCD or digitizer, to make up for that loss. Repair stores that don’t have an additional charge for an LCD repair typically inflate their glass repair price to make up for the loss from damaged LCDs. If they have one price, that means everyone is paying more to cover the cost of customers who have damaged LCDs and customers who only have cracked glass. This is why TCR separates the price of glass and LCD repairs for you! If you only have cracked glass, you only have to worry about paying to replace the cracked glass.

If your phone or tablet’s glass is shattered there will be cracks or chips on the screen itself. If it is just the glass that is damaged, the device may still function and you may be able to use it normally. If this is the case, it is likely that only the glass needs to be replaced. To prevent further damage to your device it is best to get it repaired quickly. For example, if liquids seep through the cracks it could cause permanent damage to the LCD.

Many people may continue to use their touchscreen with shattered glass and delay fixing the glass on their devices; however, if the touchscreen isn’t responsive, it could be a sign of more significant damage to the device’s digitizer which is integrated with the LCD screen.

A pixelated screen can indicate LCD damage. This would look like a patch of multicolored dots, a line or lines of discoloration, or a screen with rainbow colors. For many people, these colors are an easy way to know that their LCD is broken and that they should get it repaired.

Dropping your phone isn’t the only reason you’ll end up with a pixelated screen. Over time, your screen’s LCD may break down through regular use. This happens to other devices aside from your smartphone or tablet. Pixelation can happen to TVs and computers, too. People typically decide to buy a new device when this happens. Fortunately, with an LCD repair, you can fix the device without needing to replace it.

A black screen or black spots on your smartphone or tablet is an indication of a damaged LCD. Often with a bad LCD, a phone may still turn on and make noises, but there is no clear picture. This does not necessarily mean any other part of the phone is damaged and a simple screen replacement will get it functioning again. Sometimes it can mean a battery or other internal component is damaged. It is best to have a highly qualified phone repair technician diagnose what is wrong so the appropriate repair can be made.

Fortunately, your mobile device is fixable whether you cracked the glass or damaged the LCD. Stop by or call TCR: Triangle Cellular Repair at (919) 263-2699 for a free diagnostic and quick, affordable cell phone repair in Chapel Hill and surrounding areas. We’re always happy to help!

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

The first thing you need to do when your LCD screen gets broken is to check your phone insurance. You’ll need to know whether it covers your cracked screens and the specific conditions that surround them. Doing this helps you make the most out of the money you paid for your phone insurance.

If the insurance covers the LCD screen, arranging for a repair will be straightforward. In a lot of situations, your main issue will involve going about your day without a phone. You can expect it to return within a few days.

Take note, you might still need to pay for the excess charges. The only time problems start is when you can’t get any replacement when your screen breaks. In that case, you’ll need to do the repairs on your own.

A good option while putting your cracked phone to the repair shop is to use an old phone. If you still have your old phone stashed away somewhere, it might be your best bet for now. Look at your drawers and check whether your old phones are still functional.

If your old phones aren’t there anymore, you still have friends and relatives. Ask them if they have gadgets they’re willing to lend. That way, you’ll have something to use while you decide what method to use to repair your cracked LCD screen.

In 2017 alone, around 5 million smartphone owners in the United States broke their phone screens. That shows how likely it is for you to break yours too. Accidents can happen even when people are careful.

It can get difficult, especially when the screen itself cracks instead of the glass cover. Repairing your screen will need you to take it apart using these steps:

Remove your battery cover as well as the battery and all the cards from the device. Once done, you can now unscrew the back of the device as well as remove the screws around the LCD. The screw types will depend on your phone brand and model, but the most common ones include T4, T6, or #00 Phillips screws.

Using a pry stick, take the housing off your device. Insert the stick between the two pieces of housing. Move it around the housing perimeter so the two pieces get disconnected.

Most devices have a cable that runs from the LCD to the control board. Disconnect the cable by lifting up on the connector. You also need to do the same on the cable that runs from the glass to the control board.

Try using a pry stick to remove the LCD from its own housing. Some devices might require you to remove the glass off first. If so, you need to use a heat gun on the glass for about half a minute to make the adhesive loose enough.

It’s important to remember that some devices like the iPhone combine the glass and the LCD together. That’s why it’s important to look at your replacement LCD and see if it also has the glass with it. If they’re connected, there’s no more need to pry them apart.

Put the replacement LCD in the housing of the cracked one. Once you’re finished, you can now reassemble the device. It’s easy as long as you reverse the steps you took when taking it apart.

There is always the option to send your phone to its manufacturer for the repair. But if you don’t want to pay a lot, you should try a local repair shop. The great thing is that it only takes a short Google search to find the ones near your area.

It’s always important to check the customer reviews before you commit your phone to an expert. Not all repair shops are the same. But if you find a skilled technician, you can rest easy since they can repair your screen fast.

In some scenarios, your phone will sustain irreparable damage alongside its LCD screens. You might think that it’s already worthless and hopeless. But the truth is that there are some websites out there that will pay for your broken device.

A good example is the shopping platform eBay. Some people buy broken phones since they want to salvage other parts to repair their own phone. It won’t net you a lot of money, but you can at least save some money when you need to buy new phones.

Some will also give you credit if you’re buying a used phone. Keep in mind that you might get a better deal if you take that instead of getting cash. But it’s only good if you’re buying a used device.

You have a lot of options if your phone’s LCD screen gets broken. No matter what you choose for your LCD phone screen repair, keep in mind that these options are always available for you. Look for the best option and commit to it as soon as you can.

As often as you use your smartphone, it’s almost inevitable that you’ll eventually drop it. You may be extremely careful, but it only takes one fumble for your phone to tumble. While iPhone screens are designed to withstand impact, you might still end up with a shattered screen.

The good news: a broken screen doesn’t mean your phone is kaput. In fact, if only the glass is broken, the fix is quick and inexpensive. The bad news: if the LCD screen is broken, you’re looking at a pricier repair.

If you’ve looked into replacement parts, you’ve likely come across two very different options: a glass screen, and an LCD screen. While the first option is cheap, the second is definitely not. Here’s the difference:

1. The glass screen is the exterior layer on your phone’s display. While it is specially engineered for durability, it’s still just glass (between layers of plastic film), which is why it’s not very pricey to replace.

Most of the time, the damage to your screen will be pretty obvious. You’ll see the spider web patterns of shattered glass across the front of your iPhone. Occasionally, however, the glass screen will be intact, and you might not realize the damage until you try to use it. Whether the damage is visible or not, it’s a good idea to run a quick diagnostic to determine the extent of it.

If you encounter any of these problems, you’re dealing with a broken LCD screen. If the glass is shattered, but the display is clear and touch capability is working, that’s a good sign. The problem is probably just the glass screen.

Whether you’re dealing with cracked glass or a broken LCD screen, you can find a quick, reliable repair service at FastPhoneRepair.com. Our qualified technicians will get your iPhone repaired and up and running again in record time and at reasonable rates.

This article was co-authored by Linh Le and by wikiHow staff writer, Nicole Levine, MFA. Linh Le is a Certified Mobile Repair Specialist and the Owner of SC Mobile Repairs in San Clemente, California. With more than 12 years of experience, he specializes in smartphone, tablet, and smartwatch hardware repair. Linh has an iTech Mobile Device Repair Certification and an iOS Certification. He holds a Bachelor’s degree from The Franciscan University of Steubenville.

If the picture responds to input but displays a messy image, such as jumbled multicolored squares, the AV (audio visual) board may be damaged. This is usually a rectangular circuit board located near the audio and visual cables. Replace obviously damaged parts using a soldering iron, or order a replacement board and carefully install it to the same screws and ribbon cables.

The main control buttons may be faulty. Clean them with a metal cleaner, or jostle to attach a loose connection. If necessary, locate the circuit board they are attached to and re-solder any broken connections.

Check input cables for damage, or try other cables of the same type. If necessary, inspect the circuit board they are attached to and re-solder damaged connections.

Your suppliers for iPhone LCD screens are everywhere to be found within the USA and Asia. Broken iPhone repair locations ultimately make their decision based on two main factors: price versus quality.

Supplier Advertising: Many LCD suppliers will use catchy phrases and advertising to relate the quality of their parts. These tactics are used to avoid the use of “OEM” or “Original,” instead replacing these with words such as “AAA Quality” or “Grade A+.” More importantly, the suppliers would be violating Apple’s trademark and patent laws by advertising LCDs in this manner.

Fruitless Up-Sell: Suppliers will often attempt to upsell New Original OEM LCD screens by a few bucks to buyers who took the advertising bait. In most cases, you’ll receive the same quality LCD screen that was a bit cheaper. Most buyers won’t catch onto this.

There are many ways to tell fake iPhone LCD screens from original OEM without having to put each one under a microscope or taking up too much of your time.  Many identification methods are out-dated and the factories that manufacture the fake iPhone LCDs are always coming up with new methods to mask known visual inspection methods.

You can identify fake iPhone screens easily with a few simple techniques that will cover 98% of product, no matter how much a supplier tries to replicate the real thing.

Resolution Quality – Cell phone LCD screen resolutions are being manufactured with higher resolutions in a rapid way. Cutting corners on resolution quality is the number one way for factories to reduce costs. Being that most new models have retina or HD quality DPI, you should be able to easily identify a fake iPhone screen from the original. Make sure you have a known, real, original LCD to compare with and download a high resolution photo for testing comparison.

Flex Cable Markings: The second most common way to identify a fake iPhone LCD is through markings on the digitizer and LCD flex cables. The main one I look at is just the digitizer flex because it wouldn’t make sense for anyone to manufacture a fake LCD with an original digitizer. That would be like putting V8 engine in a VW Beetle. Additionally, Apple does work with customs officials in various countries to size fake poor quality refurbish screens. It’s a way that custom agents can spot fake iPhone parts without Apple having to provide a field manual that’s difficult to enforce.

The chart above can be used for iPod, iPad and iPhone 2G, 3G, 3GS, 4 and 4s LCD screens. I haven’t confirmed this for the iPhone 5 yet, but I will update this article shortly with my findings.

You should also be aware that if you see the flex cable’s white lettering marked over with a black sharpie and it has a “V,” it’s most likely a refurbished original part. The factories will mark over this again to avoid scrutiny with customs.

You’ll know you have a fake iPhone LCD (or at best poor quality refurbished original) if the upside-down triangle is missing from the IC chip. One would think the copy factories would enjoy reducing their cost by removing a chunk of raw material on this cover, but they don’t. I would assume it’s more costly to cut out the triangle design on the cover than to save the material cost.

Ask your suppliers directly if the product is “Genuine, original Apple digitizer and flex cable.” If their response still leaves questions, ask them to add a guarantee on your invoice. I’ve never had an LCD supplier willing to write that on an invoice no matter what wording tactics they use.

Return defective and misrepresented product. RMAs to China or the USA can be easy to neglect. Ensuring that your supplier knows you’re going to return items will better your chances that they screen your product more closely before shipping next time.

The truth is: not so many fake iPhone LCD screens are on the market these days. There are so many broken LCD screens being reclaimed that it costs less to refurbish a used cracked iPhone screen than it does to manufacture a new fake iPhone screen. No matter what the LCD model, the trends to spot fake iPhone parts tends to stay the same. LCD screens are becoming larger and smarter, and it shows in the more expensive parts costs for models such as the iPhone 5, Note II, etc. Neglecting to keep your suppliers product in check is a recipe for being taken advantage of and wasting money. By knowing how to spot fake parts, it will ensure you’re staying competitive in the cell phone repair business.

If you are reading this, you may have accidentally or intentionally damaged the screen of your TV (LCD, LED, Plasma). Now if you are looking for a solution to fix this problem, check out our recommendations:

First: If your TV does not have a cracked screen and the problem has just appeared on its own, you may be able to fall back on the TV manufacturer’s warranty. If your TV screen has developed black spots, vertical lines, small dots, unusually bright pixels, fading, distorted shading, or color issues, you may be able to use the warranty. Be sure to have your purchase receipt, and take note of the model number and serial number on the back of your TV. In case that your warranty has expired, you might contact us with any questions related to your TV repairs.

Second: If your flat-screen TV has the dreaded vertical lines, half of the screen has turned darker, the screen is cracked, or the screen is broken, this can be repaired but may cost more than you paid for the complete TV. If your screen is cracked or broken, you can try replacing the screen, LCD, Plasma, or LED part.

If your TV screen is cracked and damaged, it is mean that you have damaged the LCD, LED or Plasma display. If this is your case, we, at the Nerd Repair Center do not recommend fixing the broken/cracked screen because it will cost you more to repair your TV than to replace it with a new one.  I know this is no the answer you were looking to hear, unfortunately, this way we will save you a lot of time and money in the process. please note that this is the nerd repair center professional recommendation based on years of tv repair service experience.

Minho : sorry if i seemed ungrateful, i was just hoping that this would be a clear-cut type of fault. As in "this is definately caused by this-and-that".

I am honestly not certain whether i might have rough-handled it during fitting; it was on the table for a week as i had to order in different flex-cables during the repair, and bit of dead-end job as the owner said it had started behaving oddly prior the glass-break. So i may have been a little casual with this particular repair.

BTW - the supplier is a renown british company and has been very dependable and helpful otherwise, so i am not gonna ruin the relation over this one part

Once you have found the correct part number, see HP Consumer Notebook PCs - Ordering HP certified replacement parts. Use the instructions in this document to order a replacement part.

HP recommends that you only order parts from an authorized HP repair parts dealer. Parts ordered from third-party companies might not perform as expected and might cause additional

JUMP! ®, JUMP on Demand®, and Trade-In devices with damage will be assessed at a lower value or require a fee. See your program terms & conditions for details.

The warehouse will check the device condition when we receive it. If it’s damaged, you may receive a reduced trade-in value or be required to pay a fee on your bill statement. (Prepaid customers will have the defective device shipped back instead.)

If the device was sent for in-store pickup, a Mobile Expert will conduct a device condition check. If there"s damage, the Mobile Expert will inform you of your options.

When inspecting a screen, remove any screen protectors and cases first. Tilt the device under good lighting conditions and inspect it at multiple angles. Screen damage includes hairline cracks that are difficult to see.

Mobile devices have a Liquid Damage Indicator (LDI) to show if the device has contacted any liquids. The indicator is white when it"s new, and it turns pink or red when it contacts water.

iPhone® X and above do not have a visible LDI. If you cannot identify your LDI on an iPhone X or above, we ask you to confirm the device has not been exposed to liquid.

Wearables like Apple & Samsung watches often don"t have visible LDIs. Check for moisture under the display screen, as well as corrosion, discoloration, and fuzzy growth on the charging connection.

If the device does not fully turn on and load the home screen or if it cannot stay on without being connected to a charger, it"s considered not able to turn on.

No matter how careful you are, accidents happen. Screen damage and liquid damage are not covered under the warranty, so T-Mobile can"t exchange devices with this damage. But, we don’t want you to be stuck with a broken phone, so you have two options to replace or repair your damaged device:

Before visiting a T-Mobile Store, please file a claim with Assurant, our Protection and Repair vendor. This will expedite your repair process and minimize your time in the store. Below are two convenient ways to file a claim.

Once the claim is filed, be sure to schedule an Assurant Repair appointment at one of our T-Mobile Device Service Locations via the text message or confirmation email sent from Assurant.

You dropped your iPhone for the third time this week. Now you have to decide if you’re going to get your broken screen replaced at a local Apple repair service provider or if you’re going to start scrolling online to find the best options for a new or refurbished iPhone.

Let’s say you decide to have the screen on your old phone fixed up by a tech-savvy friend of yours so you can sell or exchange the old, beat-up iPhone 6 for a good deal on a new iPhone 13. Now you’re wondering, “Can Apple tell if I replaced my screen?”

Screen replacements come in a variety of different kinds, like LCD or OLED. Other types of smartphone screens include TFT and IPS. You may have heard of AMOLED or even Super AMOLED displays. Most of these touch screens are made by third-party manufacturers. All of these screens can function on an iPhone — and they’re cheaper than an original. So what’s the problem?

Apple says that all its screens are designed and tested for ‘Apple quality and performance standards.’ This is done before iPhones and iPads hit the shelves for the first time to ensure all Apple products have their proprietary technology like multi-touch, true tone, night shift, and haptic touch functioning properly.

While you may not understand all the jargon, this basically means that iPhone screens are immaculate in functionality — and we’re not even talking about the Pro versions here. There are many reasons why having an original iPhone screen is important, both as a buyer and as a seller. An original screen can go a long way in terms of performance, specifications, aesthetics, and exchange offers if you’re eventually looking to upgrade.

Getting your iPhone screen replaced by an authorized Apple service provider can be an expensive affair — but cheaper, aftermarket screens that aren’t from Apple often come with several issues.

To answer the question above: yes. Apple can tell if you’ve replaced your screen. As a matter of fact, you can check for yourself. In this guide, we’ll look at how you can check for genuine Apple iPhone screens, issues with non-genuine screens, and the difference between the two.

Genuine iPhones will use OEM parts. This means they’re the original equipment manufacturer for all their hardware. Every original Apple product goes through a rigorous quality check process to ensure every part, from the display to the speakers, is compliant with their standards.

Most non-OEM parts come from third-party manufacturers who use cheaper materials to make their screens. The costs are lower upfront, but, you get what you pay for. It"s likely that you"ll have to keep replacing your screen at iPhone repair shops because third-party screens perform poorly and lack longevity.

This is why it’s important to get OEM parts, even if it’s a little more expensive. Your iPhone will perform at an optimum level, as Apple meant it to, and you’ll safeguard your warranty. Original parts also help with resale value if you eventually look to sell your iPhone or exchange it for a newer model.

If you own an iPhone 11, iPhone 11 Pro, or any of the models after it and are using iOS 15.2 or later, you can follow these steps to check the parts and service history of your iPhone.Go to Settings.

If the display is non-genuine, pre-used in another iPhone, or not functioning as it should, you’ll see “Unknown Part ! ” appear just below the serial number, next to Display.

Another quick way to check whether your iPhone screen is genuine is by shining a flashlight on it. You just want to shine the light directly on the iPhone’s screen.

Focus on the reflection of the light on the display. Fake screens tend to have grid lines on them, which will show up under a flashlight. These could be running across the screen horizontally, vertically, or both. The most common causes for this include software incompatibilities, hardware failure, or screen damage.

The last few iPhones to be released all have a maximum brightness level of around 1200 units. This means that iPhone screens get very bright and usually have best-in-class color accuracy.

You can use this to check if your iPhone’s screen is genuine. Simply bump the brightness slider up to maximum brightness, and open a solid black picture. You can head over to this website for a completely black screen.

Once you’re on this screen, zoom in and look at the display. If you have a genuine Retina OLED screen, it will look pitch black — as if you haven’t turned on your iPhone.

However, if the screen replacement process was non-genuine, you might have an LCD screen that isn’t from Apple. You can tell if you have a non-genuine screen if you notice color mismatch, specks, or marks of white or grey. Anything other than solid, fullscreen pitch black is not an original iPhone display.

If you want to get the entire lowdown on the authenticity of your iPhone, you can get a complete device certification report. This is especially useful if you’re looking to buy or sell a used phone.

A device certification report will give you your device status, carrier details, and phone repair history, among many other things. The entire process only takes a few minutes.

If you’re looking to sell your iPhone or buy a refurbished one, making sure all of its parts are genuine through Phonecheck’s device certification report can help you save time and put a proper valuation on your phone. Don"t buy a used device without a Phonecheck Certified History Report.

Having a non-genuine screen on your phone can cause several issues. Not only this, but the chances of selling or exchanging your phone for maximum value will substantially decrease.

One of the most common issues with a non-genuine touch screen is multi-touch. Non-genuine screens will not be as prompt or accurate as genuine iPhone screens. Some of the signs of a non-genuine screen are:Missed screen touches or touches not registering in the intended area.

Another common issue with non-genuine iPhone screens is that there could be LCD display panels that aren’t from Apple. Original iPhone screens usually have Retina or Super Retina displays made from an OLED panel that is incredibly bright and color accurate.

If you notice the following issues with your screen’s display, you might have a non-genuine iPhone screen:iPhone"s true tone feature does not work properly (this is when your screen uses different sensors to adapt the screen"s color to the light sources around it).

Apart from the more common issues related to multi-touch and display brightness, you may experience the following issues with your iPhone if you have a faulty screen:Your iPhone does not turn on.

With some non-genuine iPhone screens, digitizers tend to malfunction, creating dead areas in the screen (usually the bottom) where your touch commands have no effect. A digitizer is a layer of glass that converts analog movements like your touch commands and gestures to digital signals that your iPhone can understand and interpret. The digitizer rests over the device"s LCD or OLED display.

While original iPhone screens may be slightly more expensive, they’re the screens that were initially manufactured specifically for Apple iPhones. You can slap a third-party screen on an iPhone, and it will work, but the performance will be nowhere near as seamless. Non-genuine LCD panels will have lower brightness levels and weaker contrast. The colors won’t pop and the screen will feel coarse to the touch.

As mentioned in the previous section, non-genuine screens have tons of issues when it comes to multi-touch, true tone, night shift, and other features that Apple meant to be enjoyed exclusively on an iPhone.

A non-genuine screen’s touch will be inaccurate, the iPhone won’t respond as well, the screen won’t be as smooth to the touch, the brightness will flicker on its own, the battery might deplete quicker, and you may experience a lag in day-to-day usage. With a genuine Apple-approved iPhone screen, you are far less likely to experience these issues.

A genuine iPhone screen is just as important on the day you buy it as it is when you decide to sell it. If you’re looking to sell your phone or hand it in to exchange for a new iPhone, the value of an iPhone with a genuine screen will always be far higher than an iPhone with a non-genuine screen.

Non-genuine screens will show up in your device’s parts and services history, and you’ll end up selling your iPhone for way less than it could have. There’s a good chance that you will pay for a screen a third time after your first non-genuine replacement fails to work properly. It’s best to get a genuine iPhone screen replaced with another genuine iPhone screen.

It’s likely you’ll have a more durable screen, better performances, and fewer problems in the long run until you decide to sell your phone for the best price available.

It’s clear that while a genuine iPhone screen may be more expensive than third-party replacement counterparts, the pros far outweigh the cons. Not only will you enjoy using your phone more, but you also won’t have to break the bank when you want to upgrade.

Speaking of upgrades, if you’re looking to buy or sell a used iPhone, we highly recommend a complete device certification report from Phonecheck. This report will help uncover any issues and give you an in-depth record of your iPhone. Avoid costly hidden problems by purchasing a history report on phonecheck.com for about the cost of a cup of coffee.

Use our “Get an Estimate” tool to review potential costs if you get service directly from Apple. If you go to another service provider, they can set their own fees, so ask them for an estimate. For service covered by AppleCare+, your fee per incident will be the same regardless of which service provider you choose. We"ll inspect your product when we receive it. If additional damage is found, you could pay an additional fee.

The Apple Limited Warranty covers your Apple Display and the Apple-branded accessories that come in the box with your product against manufacturing issues for one year from the date you bought them. Apple-branded accessories purchased separately are covered by the Apple Limited Warranty for Accessories. This includes adapters and spare cables.

Depending on the issue, you might also have coverage with AppleCare+. Terms and Conditions apply, including fees. Feature availability and options may vary by country or region.

If your situation isn’t covered, you’ll pay a fee. If the issue with your Apple Display is ineligible for service, you might pay the full replacement value.

We guarantee our service, including replacement parts, for 90 days or the remaining term of your Apple warranty or AppleCare plan, whichever is longer. This is in addition to your rights provided by consumer law.

Replacement equipment that Apple provides as part of the repair or replacement service may contain new or previously used genuine Apple parts that have been tested and pass Apple functional requirements.

No, the liquid damage service includes all parts and labor required to the get phone back to fully functional condition, but does not include liquid damage sensor replacement.

Due to its high cost, the logic board is the only part in the device that is not included in the liquid damage service. If the logic board has been irreversibly damaged, we will not be able to repair it and you will be refunded, minus the cost of return shipping if applicable.

It depends on the liquid. We reserve the right to decline liquid damage repair if the phone or device has been exposed to a liquid that may be hazardous in any way. Please call us at 1-877-320-2237 to inquire and make the proper arrangements.

Absolutely. Although salt water is corrosive and can be very damaging to electronic devices, we can still attempt to repair it. Our success rate on salt water damage is lower than that of a device that has been dropped in other liquid, but there is still a good chance that it can be repaired. If we cannot repair it, we will refund you the repair cost, minus the cost of return shipping if applicable.

First and foremost, do not attempt to turn the device on as that can cause a serious short circuit. Next, send the device in for our liquid damage service as soon as possible. The sooner we receive a liquid damaged device, the higher the chance we can repair it.

It is possible that a device can begin working normally on its own after liquid damage, but it is very uncommon. It is more likely that corrosion and residue deposits will begin to form on the logic board making the repair process more difficult. We recommend sending the device in as soon as possible, even if it is still wet. The sooner we receive a liquid damaged device, the higher the chance we can repairing it.

Probably. Even if only one function is not working, it could be caused by a variety of things. When a device has been liquid damaged, standard rules do not apply. This why we offer a liquid damage service specially tailored for liquid damaged devices.

Most liquid damage services are done in 45 minutes or less, depending on the level of damage. However, this estimate can vary depending on the extent of the damage to the logic board and other components.

If we are unable to repair your liquid damaged device for any reason, your payments will be refunded, minus the cost of return shipping if applicable, and your device will be returned. If your device could not be repaired and you do not want the device back or do not wish to pay for return shipping, please let us know and we will recycle the device at our repair facility.

There are several issues that could cause your iPhone to not power on. Finding a repair shop that can offer a comprehensive diagnostic service is key. That’s why at uBreakiFix, our diagnostic services are completely free. Even if your phone won’t turn on, we have you covered. One of the most common iPhone issues is LCD damage. If the LCD is damaged from a drop or you are experiencing a hardware malfunction, it will look like your iPhone is not powering on.

Another common issue is a damaged or dirty charging port. Dirt and grime can get lodged in your charging port and can cause your phone not to charge. Has your phone’s battery life been less than great? We offer a quick and easy iPhone battery replacement service.

Accidents happen! Cracked screen are inevitable and when it happens you need a reliable repair shop that will provide a high quality and convenient repair. If your screen is broken, you have two main iPhone screen repair options: Glass or LCD repair. The front glass protects the screen and can break on its own. The LCD display controls what you see, and a broken one can look like pixelated lines or just a blank screen. No matter the model of iPhone you have we can fix all screens. iPhone screen replacements are one of the most common repairs we see in our stores.

Replacing an iPhone battery is a quick and easy fix! Our battery replacement service starts with a full diagnostic to see if it’s the battery or some other underlying problem. Over time, batteries naturally tend to degrade and the older your model the more prone the battery is to die. We can help you get the charge back in your iPhone. We have the highest quality batteries available in stock and waiting for you at your local store.

If you have dropped your iPhone in water, the first step is to get your phone to a repair professional as soon as possible. Corrosion can set in and cause circuits to short out, leaving you with very few repair options. We can run a complete water damage diagnostic to see how far along the damage is and if we can get your iPhone back from its watery grave.

A malfunctioning iPhone speaker is typically a software or a hardware issue. When diagnosing your phones sound issues, we first look at the software to make sure it is not due to a faulty app or some type of update issue. Software issues are quick to fix and are typically free under our diagnostics service. Hardware issues are more serious, but our techs are experts at fixing these too. In some cases, you may need a speaker replacement. If your speaker is damaged, it may stop working. We can replace your iPhone speakers the same day you bring it in and for a price that won’t break the bank. Come in for a free diagnostic!

Most of the time, fixing a slow iPhone could be as simple as freeing up space on your device. Keeping hundreds of photos, videos and downloaded files can cause your phone to be slow and deleting these will speed things up. Apps can also be a major culprit of slowing your iPhone down. We suggest removing any apps that could be running "background services" or tracking your location when you’re not using it. If you think you could still use some help optimizing your iPhone, bring it in for a free diagnostic. Our techs are ready to help speed up your iPhone.

You could almost see it happening in slow motion: your smartphone is in your hand one moment, and the next thing you know, it’s barreling toward the ground in a nosedive. Sometimes the layers of glass and plastic will hold up, but all too often, this scenario will lead to a chipped, cracked, or broken phone screen.

Thanks to the right-to-repair movement, the options for mending a broken phone screen have expanded. Between simple DIY fixes, third-party repair shops, and even manufacturer-sponsored mail-in programs, there’s an option for everyone.

It all boils down to a difficult-to-reach compromise between consumer desires and engineering reality. In other words, we want phones with maxed out displays that also feature an elegant design. However, those slim edges and nearly bezel-less screens have to make some concessions in the durability department.

But regardless of the design specifics, it’s really about elastic energy, according to Red Zombie, a Clearfield, Utah-based repairs and accessories shop.

“When you drop your phone, elastic energy stored in the phone’s glass is converted into surface energy, which is why your glass cracks,” the company notes in a September 2018 blog post. “[W]hen you drop your phone, the force of impact will overcome the surface compression, resulting in small stresses that could lead to the shattering of your screen.”

To combat this reality, manufacturers like Apple and Samsung are constantly experimenting with tougher kinds of glass to absorb the impact. Red Zombie says most companies mix zinc into aluminum to create a strong base for the body of the phone.

Broken screens come in various levels of severity—from light scratches, to spiderweb-like patterns, to entirely missing chunks of glass—and you could be dealing with anything from a completely shattered display and a broken phone, to a simple cosmetic issue.

First, you should assess the damage, which means getting your phone on a solid surface and under a good light, not just giving it a quick once-over before stuffing it back in your pocket. With a little bit of stress testing and careful prodding you should be able to work out whether the screen is about to fall off or fail completely. In a lot of cases it will stay in place, cracks and all, so you can at least keep tweeting, as long as the screen is still visible and functioning.

If the phone is seriously damaged, back up your data as quickly as you can, making sure all of your photos, videos, and important files are saved somewhere else just in case it dies completely and you can’t get the phone working again. If it’s already stopped functioning, then a professional repair is probably your best bet.

The name of the game here is, “hold out until I’m eligible for an upgrade.” If you want to keep using the cracked phone, and don’t want to risk losing glass or slicing up your fingers, cover the screen with a layer of packing tape. Line everything up carefully and trim it with an X-Acto knife, and it may look almostlike a real screen protector.

This is the gussied-up version of the packing tape solution. Using a screen protector ensures you have no seams and a clean line around the edges of the screen. Granted, that might not be much of a concern when there’s a spiderweb of cracks underneath.

It’s possible to replace a broken phone screen on your own. We’ll refer you to iFixit for their excellent, step-by-step guide with photos. A few key things to keep in mind here: Before you decide to go this route, look into the cost of a replacement screen. Today’s phone screens, which incorporate touch interaction and possibly biometric sensors, don’t come cheap.

You should also look into the warranty situation. If you’re the kind of person who is willing to fix a phone yourself, you’re probably not too worried about maintaining your warranty—but it still can’t hurt to know if you’re going to void it.

Finally, unless you’re already accomplished at repairing modern solid-state electronics, you probably lack the specialized tools you’ll need for the job. Luckily, iFixit sells a handy kit that includes pretty much everything you’ll need, with the possible exception of the iOpener, a tube you heat up and apply to the phone to soften its adhesives.

You can always just take your broken phone screen to a professional repair shop. If you’re an iPhone person, look for your local Apple Store here or consider trying out Apple’s mail-in repair program. Best Buy will work on iPhones and Samsung phones. And finally, UBreakIFix has more than 700 locations across the country.

Kevin is a writer and editor living in Brooklyn. In past lives he’s been an economist, computer salesman, mathematician, barista, and college football equipment manager.

Before joining Pop Mech, Courtney was the technology reporter at her hometown newspaper, the Pittsburgh Post-Gazette. She is a graduate of the University of Pittsburgh, where she studied English and economics. Her favorite topics include, but are not limited to: the giant squid, punk rock, and robotics. She lives in the Philly suburbs with her partner, her black cat, and towers upon towers of books.

I just bought a 70 inc skyworth smart tv two weeks ago and already cracked the screen. The top half of the screen is lined but the bottom is perfect. The crack is in the upper right hand side in the corner. Any idea of what I may need to replace just by what I have told you so far? Any help is appreciated. Thank you

Hi my son threw something at my 65 inch tv and now it has lines from top to bottom I can still see a picture on both sides of the tv it just black in one stop with the lines. Can you help me please.

Hello, My son threw a plastic toy at my tv it hit the bottom now I have a small white circle with a few short lines coming from it at the bottom of my tv, my screen is now black with no picture at all but I can still hear ok, What would I need to have repaired to bring back my picture.

80″ SHARP AQUOS QUATTRON 3D L serial#206819501 hit screen by mistake and I’m told it’s a broken screen, having trouble finding someone to fix it! Help!!! trying not to throw it away!

I have a Samsung 60 inch flat screen model##LN46B65068F S/N# AUHR3CP5400327N it was working then all of a sudden it got a line straight across the middle of the screen and then there was no picture can u tell me why and what might be wrong with it please and thank you

Gm I have a proscan plcd3717A tv. It comes on for a while and shut off. 37 LCD tv at school tuner. S/n a1212089790001040. I changed the power supply board. But still doing the same thing. Should I change the main board then.

Hi my 40inch LCD TV comes on on standby then I press the button and the light turns blue. There is no pic or lights on the screen and also no sound. Model no,m40/57g-GB-ftcu-UK. Product code ,um40d57bftcug107, serial no, 105571 03650. Thanks

I was watching a show and i accidentally threw my phone at my tv and now there’s lines on the screen but the screen isn’t cracked. Can anyone help me out?

I have a Sony Bravia KDL-50W800B with a cracked screen. I understand LG makes these screens but I cannot locate a replacement. Does anyone know where I can get a new screen.

I have a SamsungLN46C 650. Over the last year the HDMI ports have loosened & caused vert lines. I corrected this by slightly adjusting them each one eventually quit working. Now none work so i have no signal. I want to solder these back and have experience soldering. The tv is 6 years old. Good idea to try to repair this myself?

I just bought a 60′ Sony tv and I accidentally hit the screen while trying to attempt to move it, the screen shattered and it’s not covered under the warranty. Can anyone fix it?

Oh no. My husband just forked out $600 on a new TV and we were all so excited. We’ve had it for 2 weeks but my son with autism just threw something at the TV while having a tantrum and now we only see half the screen and it looks all cracked. Devastated. We will try to be creative and fix it.

No picture or tv stations nor will it let even noise come through when I change the source by stepping through it, I tried to look at the screen for letters, but do not see any.

I bought a lg 50LN5100-ub a few years ago. My son threw a soft toy at it and it looks like the outside screen is busted but it’s not it’s all on the inside. I was wondering if i could send you a picture of it and tell me what it might be so I can fix it. I was doing some research and it says that it’s probably the t-con board but I want to get another opinion before I buy one.

Yes a 24 inch Vizio that has a busted screen should simply be replaced…. sell it on an online classified website and maybe you can get some money for the other parts that are still working.

I have an Emerson LF501EM5F 50″ Class 1080p LED HDTV and am looking for a screen replacement for it. It is the front screen that needs to be replaced and I can not find one any where. Does anyone know where I can get on and about how much they are.

I have the exact same problem with my Samsung 60 inch UN60J6200AFXZA set which is barely 6 months old. It took a slight bump to the front screen, didn’t leave any visible damage to the outside, but supposedly cracked the internal portion causing vertical colored lines and missing images.

I transported my 43 inch vizio flat screen TV and now I have no picture and I faint line running a curvy diagonal across the screen. It also has some blue and red colors by the line. TV was wrapped in blankets while transported. Model # E43-X2 Serial # LWZ2SEAR0510795

I have a 55 inch samsung smart tv , going thru setup the picture is fine . When changing to all inputs the right side of the screen has a great pic but no color. I’ve changed the Tcon board , same picture . The picture is great just black and white picture on the right side of screen . Any advice would be appreciated .

I accidentally hit my 60 inch TV today and it looks like the internal screen is broken, no damage to the outside at all, I have vertical lines on half the screen and the broken glass effect in the corner, if I was to buy a repair kit from amazon or ebay, will this work? I’m pretty sure this wouldn’t be covered under the manufacturer’s warranty.

I have complained service center they told me its power supply has problem and they replace it, after taking it to my house next day it has same problem.

I have a Sony KDL-32BX310, has no picture or sound. Power light turns from red to green when powered up (no flash codes). Screen shows dim backlight, goes off for about 2 seconds then back on to the dim backlight. I have tried several audio and video inputs. No on screen menus showing. I checked several power inputs from supply to main board, several showing, tough with no schematic. Changed the main board with a used part (supposed to be good??), thinking this is the only component that could prevent audio and video. Possible power supply? I checked your site for boards for this TV and not available at this time. I read the eprom has to be flashed with board change (I installed the exact same part number) so I don’t see why a flash is needed.

Have 32″ Philips LCD TV. Was watching it while it was sitting on the carpeted floor and it got knocked forward. It didn’t hit hard, the picture is still perfect but now it is only Black and White (no color). I hooked up another TV to the source and it’s color.

I was moving My Sony 48 inch Flat screen to another room. My knee was against the screen. When i turned it on there was a rainbow coloring area where it had been touching my knee.

I have here two Samsung LCD 32 inch model LA32D403E2 that has tiny horizontal lines but the second one will show very well for about five to ten minutes and start pouring white dews on the screen.

Samsung UHDTV 40 INCHES with model code UE 40JU 6400 KXZT. I have a broken screen. Can I get the replacement screen on the ebay? How much is the cost?

A Samsung UHD TV 40 Inch replacement screen is possibly available on eBay. There are usually broken Samsung TVs selling that have other issues besides the screen. Buy one of the same TVs that you have that has a different issue. Then make one good TV out of the 2. Here is a link to some broken Samsung TVs that are selling in eBay.

My Samsung 32 inch LED Television has fallen from my desk and now the screen is cracked and has lines. It looks like the above first photo. I called to a repair workshop and they told me to change the complete screen. The screen cost is same as the TV cost. So kindly help me how to fix it?

If you are going to have to spend the same amount to fix your Samsung 32 inch, you can buy a brand new one (probably a bigger TV as prices are going down) or find parts online or locally.

I have a Samsung LED TV Model# UE55D7000LSXXN and all of sudden appeared vertical lines on the right side of the screen. Do you think that I have issues with the T-CON board, can I just replace it?

My two year old threw a toy at our 60 inch Samsung LCD tv. We have sound but no picture. There is no visible external damage, but where it was hit there are thin vertical rainbow stripes about 4 inches tall and wide. Trash? Thanks for any help you can provide.

The inner screen of your Samsung 60 inch is most likely damaged and will need to be replaced. And yes it will most likely cost more to replace the screen than get a new TV.

It looks just like someone shot a hole through the glass. However, there is no physical damage at all – the screen is intact, and it hasn’t been hit by anything.

I have a jvc lcd tv my daughter stuck a butter knife between the black plastic edge and the tv screen and bow there is a black spot where the knife was and a small thin horizontal white lone and a little thicker vertical pinkish line the screen is not cracked just black spot and lines how can I fix this?

I did not know about the fuse thing as I have 2 other TV’s (some people collect rocks); I collect TV’s though I want to use this Panasonic TV as my computer monitor.

I have a Vizio M3D550KD LED TV that is less then 2 years old and I am getting light horizontal lines with a vertical grid. At the same time the picture will freeze for a second and the sound is good. When I first power up the TV the picture is almost normal for around 30 seconds. I removed the back and reseated the cables and it didn’t help. Any ideas?

The screen freezes for about 2 seconds every 2 – 3 seconds. The audio is ok when the picture freezes. The audio stays in sync with the picture when it unfreezes.

If the Samsung TV screen was hit with a wood stick, then it is cracked and the only solutions are to buy a replacement screen or a new TV. Figure out which is cheaper and go that route.

I have a Samsung 8000 series 55″ LED TV and it’s about 7 years old. Recently it has developed a horizontal light colored line that runs from left to right. The further to the right the fainter it gets and at the last 10″ or so the screen is normal and no line is visible. The line on the left has some minor color in and seems to change with the picture it but is mostly white and gets fainter as it moves right. If i set the picture to 4:3 it seems to track to the picture size and is not in the black areas. Samsung Model# UN55B800XFAA

Has the TV recently been hit or made contact with something? Any indentations on the screen or visible cracks? When you switch your Samsung 8000 55inch TV from Normal mode view to 4:3 does the colored horizontal line shrink with the picture? Please explain in detail and we can point you in the right direction if you may need a new board, etc.

My Sony 32 inch LED Television has fallen from my desk and now the screen is cracked and has lines. It looks like the above first photo. I called to a repair workshop and they told me to change the complete screen. The screen cost is same as the TV cost. So kindly help me how to fix it?

If the screen is actually cracked on your Sony 32 inch TV, you will need to replace it. You can search online for a SONY replacement screen and you may find one cheap enough to justify fixing your broken Sony TV.

I have a 43″ Vizio led TV. The plastic on the screen was scratched deeply by my daughter. It did not Crack or hurt the inner screen in anyway so just cosmetic damage. Is it possible to just replace the plastic screen?

Yes the outer plastic screen on your Vizio 43″ LED TV can be replaced. Find them here at ShopJimmy TV Vizio Parts and type in your model number or find your model number in the list and the parts available for your TV will be shown.

I have a Samsung UN40H5003 40-Inch (39.5″ Measured Diagonally) 1080p LED TV (2014 Model) that I purchased not over a month ago. My son touched it with a metal toy and now it’s got green lines and a huge black spot on the screen. Can this be replaced or do I have to buy a new tv?

Can you tell us if the screen has any visible cracks when the TV is either ON or OFF? Did the screen get hit? Or did the metal toy apply static to the TV and this issue resulted? Usually lines indicate a circuit board issue and large black spots on your TV screen indicate a faulty screen.

My cat jumped up and knocked my brand new TV off the table and shattered the screen, it is a 55″ 4K Vizio not even a week old, is there any way to fix this?

4. Buy the same broken TV on Craigslist, find one that has another issue and be sure the screen is intact. Use the other TV to make one good working TV.

Here is a place to buy parts for your VIZIO TV… Check it out to see what the price of a replacement screen will be. Enter your VIZIO model number and you will find parts for your TV.

We do not directly supply any TV screens. To find a replacement screen for your Samsung TV, we suggest looking here at SHOP JIMMY FOR SAMSUNG TV PARTS. They have everything you need to fix your Samsung TV. You will need to find your model number which is located on the back of your Samsung TV. Type your model number in, or find it in the list and all parts for your Samsung TV will be available.

I have a Vizio m55onv 55 inch flat screen. I turned the tv on one day and the right side of tv is a little dimmer then the left side i called Vizio and talked to them and they said that the screen is broke and that it would be better to buy a new one. I still have picture on both side just a a little dimmer on right. Has anyone ever had this problem?

My tv is samsung smart led tv 32″..it has cracked on its screen when it is plugged..most of the screen is dark..but you xan see a visible cracked inside..but the sound is good..what will i do?

My 3yr old son threw a plastic toy into the screen of my 60inch led lcd 3d tv now theres vertical and horizontal line in the middle part where the toy hit do you think its as good as gone?

I have an lg 55lv5500 LED LCD. I have power, sound and picture. However, the picture has vertical lines that are discolored over the whole screen (blacks are green, etc.). I have taken off the back and when I unplug the smaller LVD cable connected to the left of the TCon board, the picture clears but every other vertical line is black (meaning the vertical lines that are displayed when I do this appear to be the correct color). Is the LCD or the TCon board bad? Suggestions on how to further diagnose the problem? While I wasn’t present, my wife who was watching at the time said she heard a “pop” when the problem originated.

If your LG TV has vertical lines that are changing colors and you heard a “popping” noise while watching the TV, then this is most likely the T-con board (Timing Control Board) has a bad cap or another board has a capacitor on it that is bad. Check to see if you can find an obvious sign of a bad cap on any board. If so, replace the cap. Also, check to be sure all ribbon cables are connected and they are not damaged. If you cannot find a popped cap, then the T-con is most likely causing your issue from what you have explained. As long as the LCD panel is not cracked or broken, then a board or bad cap is causing the issue.

FYI – The T-CON board is the part of the LCD screen, it relays messages between the device’s processor and the display. The T-CON board synchronizes different parts of the screen with the info it gets from the processor. If the T-CON board malfunctions then the timing between parts of the board is disrupted and this leads to both horizontal and vertical lines that will display on the screen. It can also cause pixelation issues on your TV screen.

I really need advice and wondering to see if my TV can get repaired. My TV fell on the edge of my couch n now when its on doesn’t show picture but half black screen and colorful lines like it got hit with a dime size rock. Doesn’t show outside damage at all just only when the TV is on. I’m not around my TV now but I have all the info for it its a 50in Samsung 6500 4K Ultra HD have a picture.

We have a Samsung LED TV, now its is showing colour lines, and black lines, both in horizontal and vertical, can the screen be replace, or make it correct, need some advice!

The colored lines and horizontal and vertical lines issue with your Samsung TV could be caused by a cracked screen. If the screen is not cracked, it could be a bad inverter, bad ccfl, etc. You may also have bad capacitors on the main board. Check the main board and check the capacitors for bulging.

I have an LED TV – VESTEL SMART 40FA7100 40″ LED 27. During pickup from shop my friend pressed strongly on right hand side corner while TV was off. But after I switched it ON, a black area appeared on right corner with horizontal and vertical black/colored lined from right-to-bottom left and from top-to-bottom down. Now the only lines free visible area is about 2/3 of the screen while rest is covered with crossing lines. VESTEL service apologized for not covering such damage by warranty. Can this damage be fixed with minimum cost??

If the TV was pressed down on hard, something behind the screen (board, hardware) has made contact with the screen or the screen may have been cracked, or “pushed in”. You will need to determine where the damage is and replace parts from that point. You can find TV replacement parts online for a decent price if you do some research.

Thanks for your reply, the person who was supposed to lift the TV gently had pressed with his thumb on the last third of the right corner about 30 cm from right edge, which had resulted defective black triangle in that area, then from edges of the triangle vertical and horizontal lines appeared just as shown in the links below: Am not sure if this damage is fixable, if it can you please guide me to.

Model number 42FL 3603d/27th have a black dot on the screen spider cracks coming from it a grey screen with then turns black with vertical lines that are rainbow colored coming from the. Dot

I have a 65″ Seiki 4K LED tv, it’s just over a year old. It has recently developed a shadow of sorts, it is circular but seems to be attached to the bottom of the screen. Within the shadow are slight vertical lines. It is not always notable but is always there. It is most apparent when there is a dark picture, such as an underwater scene, and the contrast is quite obvious. The size is about 20″ in diameter, but does not seem to be getting bigger. Obviously out of warranty, I am wondering if there is anything I can do to fix it. I have fixed computer screens, but don’t know how these bigger screens work.

Son dropped power works and audio but screen looks craked internally and externally… Basically looks like example you have on this web portal… I need help?!

If screen is cracked it will need to be replaced. Check eBay for a new screen. Search craigslist for the same TV that has another issue you can get cheap and use that scre