wxga tft display resolution in stock

A 10.1” TFT display module, featuring WUXGA (1920x1200px) resolution, has been introduced by KOE. The TX26D202VM0BAA has a pixel pitch of 0.11325x0.11325, which equates to a pixel density of 224ppi.

The 16:10 aspect ratio display features IPS technology and a 16.7m colour palette, which enables highly accurate representation of image detail such as colour gradients and authentic colour reproduction. Outstanding optical performance is maintained with a contrast ratio of 800:1 and a brightness specification of 800cd/m², enabling bright, sharp display images.

The compact 10.1” display has mechanical outline dimensions of 232.0x153.0x4.7mm and an active display area of 217.44x135.9mm. A 50-pin, 2-channel LVDS interface supports 8-bit RGB, which enables a colour palette of up to 16.7m colours. The LED backlight is specified at 40,000 hours to half brightness lifetime and features an integrated dimming function. The operating temperature range of the TX26D202VM0BAA module is -30 to +80°C.

Typical applications for the WUXGA display include diagnostic systems, compact broadcast and video monitors, medical imaging, and test and measurement instrumentation. The TX126D202VM0BAA TFT display module is available now.

Mark Stephenson, Technical Marketing Manager, KOE Europe, said "KOE are one of the first LCD manufacturers to introduce compact, high resolution display modules developed specifically for industrial and professional applications. This reflects the trend for higher pixel density and enhanced image clarity found in consumer devices such as monitors, tablets and smartphones. The use of higher resolution displays with greater pixel density enables accurate reproduction and representation of graphical information such as measurement and diagnostic images, and video reproduction."

This 14-inch LCD display is a ALL o’clock TFT LCD (Thin Film Transistor Liquid Crystal Display) module. This model is Composed of a TFT LCD panel, a driving circuit and a back-light, with a 14.1 inch diagonally measured active display area with WXVGA (1920horizontal by 1080 vertical pixel) resolution in a stripe arrangement. Display 16.7M colors by 6-bit R.G.B signal input. This TFT display is a landscape type 14” TFT LCD panel with 16:9 aspect ratio and with outline dimension 320.39x205.12x2.50mm and active area 309.312(H)x173.988(V)mm, it can be operated at temperature from 0 to 45 degree, stored at temperature from - 20 to 60 degree with typical 30,000 hours LED life time, mainly used for Laptop and TFT LCD Monitor applications.

There are many LCD screen manufacturers for the Laptop Industry. LCD screens have different resolutions, size and type and these screens are compatible as long as the resolution and connections are the same.

VGA was first released in 1987 by IBM as part of their PS/2 line of computers. Since its initial inception, VGA has taken on a few different meanings in recent years and is characterized by its 640×480 resolution. It also refers to the 15-pin D-subminiature VGA connector and the analog computer display standard. Currently, it’s used for high-definition resolutions of 1080p or higher.

Developed in 1988 (just one year after IBM introduced VGA) by NEC Home Electronics, SVGA was an improvement on its predecessor. It increased graphics display resolutions by up to 36%, which amounted to 800×600 pixels. SVGA was designed to be compatible with the IBM PC and eventually replace VGA.

If you’re not sure what XGA looks like, you’ve definitely seen it before. Most modern laptop computers—around 80% of the current market—use XGA, which is an LCD display that exhibits 1024×768 resolutions. Sizes range from 15.1 inches to 10.4 inches.

As the name suggests, SXGA+ is an extension or modified version of XGA. With a 1400×1050 resolution, this screen is designed specifically and exclusively to accommodate laptop computers. It also has a much higher display accuracy than its predecessor thanks its compatibility with the horizontal and vertical dot pitch that all standard-sized laptop computers have.

QXGA has a resolution of 2048×1536. This particular display mode is commonly used by graphics designers, computer engineers, and other users who require or prefer exact image details when using various programs for specific projects. It’s also ideal for users who use their devices to watch online videos.

With a resolution of 1600×21200, UXGA is also used by computer programmers, editors, and designers who require high definition and crystal clear images. It’s commonly used for watching TV shows, movies, and other forms of media or entertainment online to ensure an exceptional viewing quality.

With a resolution of 1280×800, WXGA is an extended and wider version of the standard XGA that’s used for most modern laptops. It has an aspect ratio (the image projection in proportion to the width and height of an image as it appears on the screen) 16:10 so that the size of the screen can be expanded.

Like WXGA, WSXGA+ is also a display mode that’s meant to be an improved version of the standard XGA, except it has a screen resolution of 1440×900 with an aspect ratio of 15:10, which makes it more compatible with smaller screens.

WSXGA is basically a widescreen version of the original WXGA featuring a screen resolution of 1680×1050 with 32-bit pixels. It’s most commonly applied to wide screen LCD displays that are 15.4 inches diagonally.

Although it’s rarely used in technological applications, WUVGA has an aspect ratio of 4:3 and display resolution of 1920×1200 in its most advanced format. The reason it’s rarely used in technological applications is because of how expensive this formatting is.

WQXGA has a screen resolution of 2560×1600 with 16:10 aspect ratio and the graphics consist of about 4.1 million pixels. As a result, WQXGA needs extremely high bandwidth and processing power to support its high pixel quantity. Monitors that are equipped with WQXGA also need dual-link DVI-capable cables and other devices that support a vertical resolution of 40Hz.

qHD has become the standard display mode for modern high-end smartphones and certain gaming consoles. With a 960×540 resolution coupled with a 16:9 aspect ratio, qHD accounts for a quarter of 1080p’s screen resolution, but it still packs a powerful punch for mobile devices.

This is considered the lowest possible standard in HD screening and is often used for minimal tasks like watching videos on YouTube. It has a screen resolution of 1280×720. The 720 numeral stands for the number of horizontal lines that make up the complete raster. The lowercase p indicates the progressive scanning capabilities where each line is visible from the top of the screen in the image raster.

Also known as full HDTV, ultra-HD, and true HDTV, 1080p is a display mode that’s applied to most modern television screens as it has a far superior picture quality compared to 720p. It has a screen resolutionof 1920×1080, which indicates that there are 1080 vertical scans that occur right before the viewers’ eyes.

While most modern flat screen televisions boast a 4K standard resolution, electronic companies are also starting to adapt an 8K display mode. What does this mean? The K in all these abbreviations stands for “kilo”, meaning “thousand”. 2K, which is the standard used for most commercial movie screen projectors and high-end mobile devices, has a screen resolution of 2560×1440. 4K has a resolution of 4096×2160 and is also used for some high-end mobile devices. 8K, which has a resolution of 7680×4320 and is considered to be the highest screen resolution that humans can view. It’s also projected to be the next reigning champion of screen resolution standards as the technology continues to evolve.

As one of the leading designers, manufacturers, and distributors of high-end military and commercial-grade displays in North America, Nauticomp Inc. is at the forefront of this technological renaissance. We build and deliver high-end monitors and displays that are customized to meet the needs and daily operations of our customers. Contact us today to learn more or to place your order!

14.1-inch 1CCFL WXGA TFT LCD Display/ Screen panel, Resolution: 1280*800, Video Connector: 30 pins, LCD Model: LTN141AT02-301 LTN141AT02-501 N141I3-L01 B141EW01 V0 B141EW01 V1 B141EW01 V2, for Laptop

The graphics display resolution is the width and height dimension of an electronic visual display device, measured in pixels. This information is used for electronic devices such as a computer monitor. Certain combinations of width and height are standardized (e.g. by VESA) and typically given a name and an initialism that is descriptive of its dimensions. A graphics display resolution can be used in tandem with the size of the graphics display to calculate pixel density. An increase in the pixel density often correlates with a decrease in the size of individual pixels on a display.

The favored aspect ratio of mass-market display industry products has changed gradually from 4:3, then to 16:10, then to 16:9, and is now changing to 18:9 for smartphones.cathode ray tube (CRT). The 16:10 aspect ratio had its largest use in the 1995–2010 period, and the 16:9 aspect ratio tends to reflect post-2010 mass-market computer monitor, laptop, and entertainment products displays. On CRTs, there was often a difference between the aspect ratio of the computer resolution and the aspect ratio of the display causing non-square pixels (e.g. 320 × 200 or 1280 × 1024 on a 4:3 display).

The 4:3 aspect ratio was common in older television cathode ray tube (CRT) displays, which were not easily adaptable to a wider aspect ratio. When good quality alternate technologies (i.e., liquid crystal displays (LCDs) and plasma displays) became more available and less costly, around the year 2000, the common computer displays and entertainment products moved to a wider aspect ratio, first to the 16:10 ratio. The 16:10 ratio allowed some compromise between showing older 4:3 aspect ratio broadcast TV shows, but also allowing better viewing of widescreen movies. However, around the year 2005, home entertainment displays (i.e., TV sets) gradually moved from 16:10 to the 16:9 aspect ratio, for further improvement of viewing widescreen movies. By about 2007, virtually all mass-market entertainment displays were 16:9. In 2011, 1920 × 1080 (Full HD, the native resolution of Blu-ray) was the favored resolution in the most heavily marketed entertainment market displays. The next standard, 3840 × 2160 (4K UHD), was first sold in 2013.

Also in 2013, displays with 2560 × 1080 (aspect ratio 64:27 or 2.370, however commonly referred to as "21:9" for easy comparison with 16:9) appeared, which closely approximate the common CinemaScope movie standard aspect ratio of 2.35–2.40. In 2014, "21:9" screens with pixel dimensions of 3440 × 1440 (actual aspect ratio 43:18 or 2.38) became available as well.

The computer display industry maintained the 16:10 aspect ratio longer than the entertainment industry, but in the 2005–2010 period, computers were increasingly marketed as dual-use products, with uses in the traditional computer applications, but also as means of viewing entertainment content. In this time frame, with the notable exception of Apple, almost all desktop, laptop, and display manufacturers gradually moved to promoting only 16:9 aspect ratio displays. By 2011, the 16:10 aspect ratio had virtually disappeared from the Windows laptop display market (although Mac laptops are still mostly 16:10, including the 2880 × 1800 15" Retina MacBook Pro and the 2560 × 1600 13" Retina MacBook Pro). One consequence of this transition was that the highest available resolutions moved generally downward (i.e., the move from 1920 × 1200 laptop displays to 1920 × 1080 displays).

All standard HD resolutions share a 16∶9 aspect ratio, although some derived resolutions with smaller or larger ratios also exist. Most of the narrower resolutions are only used for storing, not for displaying videos.

nHD (ninth HD) is a display resolution of 640 × 360 pixels, which is exactly one-ninth of a Full HD (1080p) frame and one-quarter of a HD (720p) frame. Pixel doubling (vertically and horizontally) nHD frames will form one 720p frame and pixel tripling nHD frames will form one 1080p frame.

One drawback of this resolution regarding encoding is that the number of lines is not an even multiple of 16, which is a common macroblock size for video codecs. Video frames encoded with 16×16 pixel macroblocks would be padded to 640 × 368 and the added pixels would be cropped away at playback. H.264 codecs have this padding and cropping ability built-in as standard. The same is true for qHD and 1080p but the relative amount of padding is more for lower resolutions such as nHD.

To avoid storing the eight lines of padded pixels, some people prefer to encode video at 624 × 352, which only has one stored padded line. When such video streams are either encoded from HD frames or played back on HD displays in full-screen mode (either 720p or 1080p) they are scaled by non-integer scale factors. True nHD frames on the other hand has integer scale factors, for example Nokia 808 PureView with nHD display.

One of the few tabletop TVs to use this as its native resolution was the Sony XEL-1. Similar to DVGA, this resolution became popular for high-end smartphone displays in early 2011. Mobile phones including the Jolla, Sony Xperia C, HTC Sensation, Motorola Droid RAZR, LG Optimus L9, Microsoft Lumia 535 and Samsung Galaxy S4 Mini have displays with the qHD resolution, as does the PlayStation Vita portable game system.

The HD resolution of 1280 × 720 pixels stems from high-definition television (HDTV), where it originally used 50 or 60 frames per second. With its 16:9 aspect ratio, it is exactly 2 times the width and 11/2 times the height of 4:3 VGA, which shares its aspect ratio and 480 line count with NTSC. HD, therefore, has exactly 3 times as many pixels as VGA, i.e. almost 1 megapixel.

This resolution is often referred to as p (which stands for progressive scan and is important for transmission formats) is irrelevant for labeling digital display resolutions. When distinguishing 1280 × 720 from 1920 × 1080, the pair has sometimes been labeled HD1 or HD-1 and HD2 or HD-2, respectively.

In the mid-2000s, when the digital HD technology and standard debuted on the market, this type of resolution was often referred to by the branded name HDr for short, which had specified it as a minimum resolution for devices to qualify for the certification. However, few screens have been built that use this resolution natively. Most employ 16:9 panels with 768 lines instead (WXGA), which resulted in odd numbers of pixels per line, i.e. 13651/3 are rounded to 1360, 1364, 1366 or even 1376, the next multiple of 16.

1280 × 1080 is the resolution of Panasonic"s DVCPRO HD185:1), an approximate of Movietone cameras of the 1930s. In 2007, Hitachi released a few 42" and 50" television models at this resolution.

FHD (Full HD) is the resolution used by the 1080p and 1080i HDTV video formats. It has a 16:9 aspect ratio and 2,073,600 total pixels, i.e. very close to 2 megapixels, and is exactly 50% larger than 720p HD (1280 × 720) in each dimension for a total of 2.25 times as many pixels. When using interlacing, the uncompressed bandwidth requirements are similar to those of 720p at the same field rate (a 12.5% increase, as one field of 1080i video is 1,036,800 pixels, and one frame of 720p video is 921,600 pixels). Although the number of pixels is the same for 1080p and 1080i, the effective resolution is somewhat lower for the interlaced format, as it is necessary to use some vertical low-pass filtering to reduce temporal artifacts such as interline twitter.

DCI 2K is a standardized format established by the Digital Cinema Initiatives consortium in 2005 for 2K video projection. This format has a resolution of 2048 × 1080 (2.2 megapixels) with an aspect ratio of 256:135 (1.8962:1).

This resolution is equivalent to a Full HD (1920 × 1080) extended in width by 33%, with an aspect ratio of 64:27 (2.370, or 21.3:9). It is sometimes referred to as "1080p ultrawide" or "UW-FHD" (ultrawide FHD).divide the screen into two 1280 × 1080 screens.

QHD (Quad HD), WQHD (Wide Quad HD),1440p,2560 × 1440 pixels in a 16:9 aspect ratio. The name QHD reflects the fact that it has four times as many pixels as HD (720p). It is also commonly called WQHD, to emphasize it being a wide resolution, although that is technically unnecessary, since the HD resolutions are all wide. One advantage of using "WQHD" is avoiding confusion with qHD with a small q (960 × 540).

This resolution was under consideration by the ATSC in the late 1980s to become the standard HDTV format, because it is exactly 4 times the width and 3 times the height of VGA, which has the same number of lines as NTSC signals at the SDTV 4:3 aspect ratio. Pragmatic technical constraints made them choose the now well-known 16:9 formats with twice (HD) and thrice (FHD) the VGA width instead.

The 27-inch version of the Apple Cinema Display monitor introduced in July 2010 has a native resolution of 2560 × 1440, as does its successor, the 27-inch Apple Thunderbolt Display.

The resolution is also used in portable devices. In September 2012, Samsung announced the Series 9 WQHD laptop with a 13-inch 2560 × 1440 display.LG announced a 5.5-inch QHD smartphone display, which was used in the LG G3.Vivo announced a smartphone with a 2560 × 1440 display.Galaxy Note 4,GoogleMotorolaNexus 6HTC 10, the Lumia 950, and the Galaxy S6

This resolution has a 16:9 aspect ratio, and is exactly four times as many pixels as the 1600 × 900 HD+ resolution. It has been referred to as WQXGA+,QHDQHD+

This resolution is equivalent to QHD (2560 × 1440) extended in width by 34%, giving it an aspect ratio of 43:18 (2.38:1, or 21.5:9; commonly marketed as simply "21:9"). The first monitor to support this resolution was the 34-inch LG 34UM95-P.UW-QHD to describe this resolution.

This resolution is equivalent to two Full HD (1920 × 1080) displays side by side or one vertical half of a 4K UHD (3840 × 2160) display. It has an aspect ratio of 32:9 (3.5:1), close to the 3.6:1 ratio of IMAX UltraWideScreen 3.6. Samsung monitors at this resolution contain built-in firmware to divide the screen into two 1920 × 1080 screens, or one 2560 × 1080 and one 1280 × 1080 screen.

This resolution has a 12:5 aspect ratio (2.4:1, or 21.6:9; commonly marketed as simply "21:9"). It is equivalent to WQXGA (2560 × 1600) extended in width by 50%, or 4K UHD (3840 × 2160) reduced in height by 26%. This resolution is commonly encountered in cinematic 4K content that has been cropped vertically to a widescreen 2.4:1 aspect ratio. The first monitor to support this resolution was the 37.5-inch LG 38UC99-W. Other vendors followed, with Dell U3818DW, HP Z38c, and Acer XR382CQK. This resolution is referred to as UW4K, WQHD+,UWQHD+, or QHD+,

This resolution, sometimes referred to as 4K UHD or 4K×2K, has a 16:9 aspect ratio and 8,294,400 pixels. It is double the size of Full HD (1920 × 1080) in both dimensions for a total of four times as many pixels, and triple the size of HD (1280 × 720) in both dimensions for a total of nine times as many pixels. It is the lowest common multiple of the HDTV resolutions.

3840 × 2160 was chosen as the resolution of the UHDTV1 format defined in SMPTE ST 2036-1,4K UHDTV system defined in ITU-R BT.2020UHD-1 broadcast standard from DVB.Ultra HD display.QFHD (Quad Full HD).

The first commercial displays capable of this resolution include an 82-inch LCD TV revealed by Samsung in early 2008,PPI 4K IPS monitor for medical purposes launched by Innolux in November 2010.Toshiba announced the REGZA 55x3,

DisplayPort supports 3840 × 2160 at 30Hz in version 1.1 and added support for up to 75Hz in version 1.2 (2009) and 120Hz in version 1.3 (2014),HDMI added support for 3840 × 2160 at 30Hz in version 1.4 (2009)Hz in version 2.0 (2013).

When support for 4K at 60Hz was added in DisplayPort 1.2, no DisplayPort timing controllers (TCONs) existed which were capable of processing the necessary amount of data from a single video stream. As a result, the first 4K monitors from 2013 and early 2014, such as the Sharp PN-K321, Asus PQ321Q, and Dell UP2414Q and UP3214Q, were addressed internally as two 1920 × 2160 monitors side by side instead of a single display and made use of DisplayPort"s Multi-Stream Transport (MST) feature to multiplex a separate signal for each half over the connection, splitting the data between two timing controllers.Asus PB287Q no longer rely on MST tiling technique to achieve 4K at 60Hz,

4096 × 2160, referred to as DCI 4K, Cinema 4K4K×2K, is the resolution used by the 4K container format defined by the Digital Cinema Initiatives Digital Cinema System Specification, a prominent standard in the cinema industry. This resolution has an aspect ratio of 256:135 (1.8962:1), and 8,847,360 total pixels.

This resolution is equivalent to 4K UHD (3840 × 2160) extended in width by 33%, giving it a 64:27 aspect ratio (2.370 or 21.3:9, commonly marketed as simply "21:9") and 11,059,200 total pixels. It is exactly double the size of 2560 × 1080 in both dimensions, for a total of four times as many pixels. The first displays to support this resolution were 105-inch televisions, the LG 105UC9 and the Samsung UN105S9W.5120 × 2160 monitor, the 34WK95U,5K2K WUHD.

This resolution, commonly referred to as 5K or 5K × 3K, has a 16:9 aspect ratio and 14,745,600 pixels. Although it is not established by any of the UHDTV standards, some manufacturers such as Dell have referred to it as UHD+.QHD (2560 × 1440) in both dimensions for a total of four times as many pixels, and is 33% larger than 4K UHD (3840 × 2160) in both dimensions for a total of 1.77 times as many pixels. The line count of 2880 is also the least common multiple of 480 and 576, the scanline count of NTSC and PAL, respectively. Such a resolution can vertically scale SD content to fit by natural numbers (6 for NTSC and 5 for PAL). Horizontal scaling of SD is always fractional (non-anamorphic: 5.33...5.47, anamorphic: 7.11...7.29).

DisplayPort version 1.3 added support for 5K at 60Hz over a single cable, whereas DisplayPort1.2 was only capable of 5K at 30Hz. Early 5K 60Hz displays such as the Dell UltraSharp UP2715K and HP DreamColor Z27q that lacked DisplayPort1.3 support required two DisplayPort1.2 connections to operate at 60Hz, in a tiled display mode similar to early 4K displays using DP MST.

Other resolution with the same 5120-pixel width, which is the lowest common multiple of popular 1024 and 1280, but a different aspect ratio have also been called "5K" and some nominal 5K resolutions are just 4800 pixels wide, which is the lowest common multiple of 960 and 800.

This resolution, sometimes referred to as 8K UHD, has a 16:9 aspect ratio and 33,177,600 pixels. It is exactly double the size of 4K UHD (3840 × 2160) in each dimension for a total of four times as many pixels, and Quadruple the size of Full HD (1920 × 1080) in each dimension for a total of sixteen times as many pixels. 7680 × 4320 was chosen as the resolution of the UHDTV2 format defined in SMPTE ST 2036-1,8K UHDTV system defined in ITU-R BT.2020UHD-2 broadcast standard from DVB.

DisplayPort1.3, finalized by VESA in late 2014, added support for 7680 × 4320 at 30Hz (or 60Hz with Y′CBCR 4:2:0 subsampling). VESA"s Display Stream Compression (DSC), which was part of early DisplayPort1.3 drafts and would have enabled 8K at 60Hz without subsampling, was cut from the specification prior to publication of the final draft.

DSC support was reintroduced with the publication of DisplayPort1.4 in March 2016. Using DSC, a "visually lossless" form of compression, formats up to 7680 × 4320 (8K UHD) at 60Hz with HDR and 30bit/px color depth are possible without subsampling.

Quarter-QVGA (QQVGA or qqVGA) denotes a resolution of 160 × 120 or 120 × 160 pixels, usually used in displays of handheld devices. The term Quarter-QVGA signifies a resolution of one fourth the number of pixels in a QVGA display (half the number of vertical and half the number of horizontal pixels) which itself has one fourth the number of pixels in a VGA display.

Half-QVGA denotes a display screen resolution of 240 × 160 or 160 × 240 pixels, as seen on the Game Boy Advance. This resolution is half of QVGA, which is itself a quarter of VGA, which is 640 × 480 pixels.

Quarter VGA (QVGA or qVGA) is a popular term for a computer display with 320 × 240 display resolution. QVGA displays were most often used in mobile phones, personal digital assistants (PDA), and some handheld game consoles. Often the displays are in a "portrait" orientation (i.e., taller than they are wide, as opposed to "landscape") and are referred to as 240 × 320.

The name comes from having a quarter of the 640 × 480 maximum resolution of the original IBM Video Graphics Array display technology, which became a de facto industry standard in the late 1980s. QVGA is not a standard mode offered by the VGA BIOS, even though VGA and compatible chipsets support a QVGA-sized Mode X. The term refers only to the display"s resolution and thus the abbreviated term QVGA or Quarter VGA is more appropriate to use.

QVGA resolution is also used in digital video recording equipment as a low-resolution mode requiring less data storage capacity than higher resolutions, typically in still digital cameras with video recording capability, and some mobile phones. Each frame is an image of 320 × 240 pixels. QVGA video is typically recorded at 15 or 30 frames per second. QVGA mode describes the size of an image in pixels, commonly called the resolution; numerous video file formats support this resolution.

While QVGA is a lower resolution than VGA, at higher resolutions the "Q" prefix commonly means quad(ruple) or four times higher display resolution (e.g., QXGA is four times higher resolution than XGA). To distinguish quarter from quad, lowercase "q" is sometimes used for "quarter" and uppercase "Q" for "Quad", by analogy with SI prefixes like m/M and p/P, but this is not a consistent usage.

Wide QVGA or WQVGA is any display resolution having the same height in pixels as QVGA, but wider. This definition is consistent with other "wide" versions of computer displays.

Since QVGA is 320 pixels wide and 240 pixels high (aspect ratio of 4:3), the resolution of a WQVGA screen might be 360 × 240 (3:2 aspect ratio), 384 × 240 (16:10 aspect ratio), 400 × 240 (5:3 – such as the Nintendo 3DS screen or the maximum resolution in YouTube at 240p), 428 × 240 (≈16:9 ratio) or 432 × 240 (18:10 aspect ratio). As with WVGA, exact ratios of n:9 are difficult because of the way VGA controllers internally deal with pixels. For instance, when using graphical combinatorial operations on pixels, VGA controllers will use 1 bit per pixel. Since bits cannot be accessed individually but by chunks of 16 or an even higher power of 2, this limits the horizontal resolution to a 16-pixel granularity, i.e., the horizontal resolution must be divisible by 16. In the case of the 16:9 ratio, with 240 pixels high, the horizontal resolution should be 240 / 9 × 16 = 426.6, the closest multiple of 16 is 432.

WQVGA has also been used to describe displays that are not 240 pixels high, for example, Sixteenth HD1080 displays which are 480 pixels wide and 270 or 272 pixels high. This may be due to WQVGA having the nearest screen height.

WQVGA resolutions were commonly used in touchscreen mobile phones, such as 400 × 240, 432 × 240, and 480 × 240. For example, the Hyundai MB 490i, Sony Ericsson Aino and the Samsung Instinct have WQVGA screen resolutions – 240 × 432. Other devices such as the Apple iPod Nano also use a WQVGA screen, 240 × 376 pixels.

HVGA (Half-size VGA) screens have 480 × 320 pixels (3:2 aspect ratio), 480 × 360 pixels (4:3 aspect ratio), 480 × 272 (≈16:9 aspect ratio), or 640 × 240 pixels (8:3 aspect ratio). The former is used by a variety of PDA devices, starting with the Sony CLIÉ PEG-NR70 in 2002, and standalone PDAs by Palm. The latter was used by a variety of handheld PC devices. VGA resolution is 640 × 480.

HVGA was the only resolution supported in the first versions of Google Android, up to release 1.5.WVGA resolution on the Motorola Droid or the QVGA resolution on the HTC Tattoo.

Three-dimensional computer graphics common on television throughout the 1980s were mostly rendered at this resolution, causing objects to have jagged edges on the top and bottom when edges were not anti-aliased.

Video Graphics Array (VGA) refers specifically to the display hardware first introduced with the IBM PS/2 line of computers in 1987.D-subminiature VGA connector, or the 640 × 480 resolution itself. While the VGA resolution was superseded in the personal computer market in the 1990s, it became a popular resolution on mobile devices in the 2000s.

In the field of (NTSC) videos, the resolution of 640 × 480 is sometimes called Standard Definition (SD), in contrast to high-definition (HD) resolutions like 1280 × 720 and 1920 × 1080.

Wide VGA or WVGA, sometimes just WGA is any display resolution with the same 480-pixel height as VGA but wider, such as 720 × 480 (3:2 aspect ratio), 800 × 480 (5:3), 848 × 480, 852 × 480, 853 × 480, or 854 × 480 (≈16:9).

It is a common resolution among LCD projectors and later portable and hand-held internet-enabled devices (such as MID and Netbooks) as it is capable of rendering websites designed for an 800 wide window in full page-width. Examples of hand-held internet devices, without phone capability, with this resolution include: Spice stellar nhance mi-435, ASUS Eee PC 700 series, Dell XCD35, Nokia 770, N800, and N810.

FWVGA is an abbreviation for Full Wide Video Graphics Array which refers to a display resolution of 854 × 480 pixels. 854 × 480 is approximately the 16:9 aspect ratio of anamorphically "un-squeezed" NTSC DVD widescreen video and is considered a "safe" resolution that does not crop any of the image. It is called Full WVGA to distinguish it from other, narrower WVGA resolutions which require cropping 16:9 aspect ratio high-definition video (i.e. it is full width, albeit with a considerable reduction in size).

In 2010, mobile phones with FWVGA display resolution started to become more common. A list of mobile phones with FWVGA displays is available. In addition, the Wii U GamePad that comes with the Nintendo Wii U gaming console includes a 6.2-inch FWVGA display.

Super Video Graphics Array, abbreviated to Super VGA or SVGA, also known as Ultra Video Graphics Array,Ultra VGA or UVGA, is a broad term that covers a wide range of computer display standards.

Originally, it was an extension to the VGA standard first released by IBM in 1987. Unlike VGA – a purely IBM-defined standard – Super VGA was defined by the Video Electronics Standards Association (VESA), an open consortium set up to promote interoperability and define standards. When used as a resolution specification, in contrast to VGA or XGA for example, the term SVGA normally refers to a resolution of 800 × 600 pixels.

The marginally higher resolution 832 × 624 is the highest 4:3 resolution not greater than 219 pixels, with its horizontal dimension a multiple of 32 pixels. This enables it to fit within a framebuffer of 512KB (512 × 210 bytes), and the common multiple of 32 pixels constraint is related to alignment. For these reasons, this resolution was available on the Macintosh LC III and other systems.

Examples of devices that use DVGA include the Meizu MX mobile phone and the Apple iPhone 4 and 4S with the iPod Touch 4, where the screen is called the "Retina Display".

The wide version of SVGA is known as WSVGA (Wide Super VGA or Wide SVGA), featured on Ultra-Mobile PCs, netbooks, and tablet computers. The resolution is either 1024 × 576 (aspect ratio 16:9) or 1024 × 600 (128:75) with screen sizes normally ranging from 7 to 10 inches. It has full XGA width of 1024 pixels.

The Extended Graphics Array (XGA) is an IBM display standard introduced in 1990. Later it became the most common appellation of the 1024 × 768 pixels display resolution, but the official definition is broader than that. It was not a new and improved replacement for Super VGA, but rather became one particular subset of the broad range of capabilities covered under the "Super VGA" umbrella.

The initial version of XGA (and its predecessor, the IBM 8514/A) expanded upon IBM"s older VGA by adding support for four new screen modes (three, for the 8514/A), including one new resolution:

XGA-2 added a 24-bit DAC, but this was used only to extend the available master palette in 256-color mode, e.g. to allow true 256-greyscale output instead of the 64 grey levels previously available; there was still no direct True Color mode despite the adapter featuring enough default onboard VRAM (1MB) to support it. Other improvements included the provision of the previously missing 800 × 600 resolution (using an SVGA or multisync monitor) in up to 65,536 colors, faster screen refresh rates in all modes (including non-interlace, flicker-free output for 1024 × 768), and improved accelerator performance and versatility.

IBM licensed the XGA technology and architecture to certain third-party hardware developers, and its characteristic modes (although not necessarily the accelerator functions, nor the MCA data-bus interface) were aped by many others. These accelerators typically did not suffer from the same limitations on available resolutions and refresh rate, and featured other now-standard modes like 800 × 600 (and 1280 × 1024) at various color depths (up to 24bit/px) and interlaced, non-interlaced and flicker-free refresh rates even before the release of the XGA-2.

Wide XGA (WXGA) is a set of non-standard resolutions derived from the XGA display standard by widening it to a widescreen aspect ratio. WXGA is commonly used for low-end LCD TVs and LCD computer monitors for widescreen presentation. The exact resolution offered by a device described as "WXGA" can be somewhat variable owing to a proliferation of several closely related timings optimised for different uses and derived from different bases.

When referring to televisions and other monitors intended for consumer entertainment use, WXGA is generally understood to refer to a resolution of 1366 × 768,1024 × 768 pixels, 4:3 aspect) extended to give square pixels on the increasingly popular 16:9 widescreen display ratio without having to effect major signalling changes other than a faster pixel clock, or manufacturing changes other than extending panel width by one third. As 768 is not divisible by 9, the aspect ratio is not quite 16:9 – this would require a horizontal width of 13651⁄3 pixels. However, at only 0.05%, the resulting error is insignificant.

In 2006, 1366 × 768 was the most popular resolution for liquid crystal display televisions (versus XGA for Plasma TVs flat panel displays);1920 × 1080.

A common variant on this resolution is 1360 × 768, which confers several technical benefits, most significantly a reduction in memory requirements from just over to just under 1MB per 8-bit channel (1366 × 768 needs 1024.5KB per channel; 1360 × 768 needs 1020KB; 1MB is equal to 1024KB), which simplifies architecture and can significantly reduce the amount–and speed–of VRAM required with only a very minor change in available resolution, as memory chips are usually only available in fixed megabyte capacities. For example, at 32-bit color, a 1360 × 768 framebuffer would require only 4MB, whilst a 1366 × 768 one may need 5, 6 or even 8MB depending on the exact display circuitry architecture and available chip capacities. The 6-pixel reduction also means each line"s width is divisible by 8 pixels, simplifying numerous routines used in both computer and broadcast/theatrical video processing, which operate on 8-pixel blocks. Historically, many video cards also mandated screen widths divisible by 8 for their lower-color, planar modes to accelerate memory accesses and simplify pixel position calculations (e.g. fetching 4-bit pixels from 32-bit memory is much faster when performed 8 pixels at a time, and calculating exactly where a particular pixel is within a memory block is much easier when lines do not end partway through a memory word), and this convention persisted in low-end hardware even into the early days of widescreen, LCD HDTVs; thus, most 1366-width displays also quietly support display of 1360-width material, with a thin border of unused pixel columns at each side. This narrower mode is of course even further removed from the 16:9 ideal, but the error is still less than 0.5% (technically, the mode is either 15.94:9.00 or 16.00:9.04) and should be imperceptible.

When referring to laptop displays or independent displays and projectors intended primarily for use with computers, WXGA is also used to describe a resolution of 1280 × 800 pixels, with an aspect ratio of 16:10.both dimensions vs. the old standard (especially useful in portrait mode, or for displaying two standard pages of text side by side), a perceptibly "wider" appearance and the ability to display 720p HD video "native" with only very thin letterbox borders (usable for on-screen playback controls) and no stretching. Additionally, like 1360 × 768, it required only 1000KB (just under 1MB) of memory per 8-bit channel; thus, a typical double-buffered 32-bit colour screen could fit within 8MB, limiting everyday demands on the complexity (and cost, energy use) of integrated graphics chipsets and their shared use of typically sparse system memory (generally allocated to the video system in relatively large blocks), at least when only the internal display was in use (external monitors generally being supported in "extended desktop" mode to at least 1600 × 1200 resolution). 16:10 (or 8:5) is itself a rather "classic" computer aspect ratio, harking back to early 320 × 200 modes (and their derivatives) as seen in the Commodore 64, IBM CGA card and others. However, as of mid-2013, this standard is becoming increasingly rare, crowded out by the more standardised and thus more economical-to-produce 1366 × 768 panels, as its previously beneficial features become less important with improvements to hardware, gradual loss of general backwards software compatibility, and changes in interface layout. As of August 2013, the market availability of panels with 1280 × 800 native resolution had been generally relegated to data projectors or niche products such as convertible tablet PCs and LCD-based eBook readers.

First, the HDTV-standard 1280 × 720720p"), which offers an exact 16:9 aspect with square pixels; naturally, it displays standard 720p HD video material without stretching or letterboxing and 1080i/1080p with a simple 2:3 downscale. This resolution has found some use in tablets and modern, high-pixel-density mobile phones, as well as small-format "netbook" or "ultralight" laptop computers. However, its use is uncommon in larger, mainstream devices as it has an insufficient vertical resolution for the proper use of modern operating systems such as Windows 7 whose UI design assumes a minimum of 768 lines. For certain uses such as word processing, it can even be considered a slight downgrade (reducing the number of simultaneously visible lines of text without granting any significant benefit as even 640 pixels is sufficient horizontal resolution to legibly render a full page width, especially with the addition of subpixel anti-aliasing).

The second variant, 1280 × 768, can be seen as a compromise resolution that addressed this problem, as well as a halfway point between the older 1024 × 768 and 1280 × 1024 resolutions, and a stepping stone to 1366 × 768 (being one-quarter wider than 1024, not one-third) and 1280 × 800, that never quite caught on in the same way as either of its arguably derivative successors. Its square-pixel aspect ratio is 15:9, in contrast to HDTV"s 16:9 and 1280 × 800"s 16:10. It is also the lowest resolution that might be found in an "Ultrabook" standard laptop, as it satisfies the minimum horizontal and vertical pixel resolutions required to officially qualify for the designation.

Widespread availability of 1280 × 800 and 1366 × 768 pixel resolution LCDs for laptop monitors can be considered an OS-driven evolution from the formerly popular 1024 × 768 screen size, which has itself since seen UI design feedback in response to what could be considered disadvantages of the widescreen format when used with programs designed for "traditional" screens. In Microsoft Windows operating system specifically, the larger taskbar of Windows Vista and 7 occupies an additional 16-pixel lines by default, which may compromise the usability of programs that already demanded a full 1024 × 768 (instead of, e.g. 800 × 600) unless it is specifically set to use small icons; an "oddball" 784-line resolution would compensate for this, but 1280 × 800 has a simpler aspect and also gives the slight bonus of 16 more usable lines. Also, the Windows Sidebar in Windows Vista and 7 can use the additional 256 or 336 horizontal pixels to display informational "widgets" without compromising the display width of other programs, and Windows 8 is specifically designed around a "two-pane" concept where the full 16:9 or 16:10 screen is not required. Typically, this consists of a 4:3 main program area (typically 1024 × 768, 1000 × 800 or 1440 × 1080) plus a narrow sidebar running a second program, showing a toolbox for the main program or a pop-out OS shortcut panel taking up the remainder.

XGA+ stands for Extended Graphics Array Plus and is a computer display standard, usually understood to refer to the 1152 × 864 resolution with an aspect ratio of 4:3. Until the advent of widescreen LCDs, XGA+ was often used on 17-inch desktop CRT monitors. It is the highest 4:3 resolution not greater than 220 pixels (≈1.05 megapixels), with its horizontal dimension a multiple of 32 pixels. This enables it to fit closely into a video memory or framebuffer of 1MB (1 × 220 bytes), assuming the use of one byte per pixel. The common multiple of 32 pixels constraint is related to alignment.

Historically, the resolution also relates to the earlier standard of 1152 × 900 pixels, which was adopted by Sun Microsystems for the Sun-2 workstation in the early 1980s. A decade later, Apple Computer selected the resolution of 1152 × 870 for their 21-inch CRT monitors, intended for use as two-page displays on the Macintosh II computer. These resolutions are even closer to the limit of a 1MB framebuffer, but their aspect ratios differ slightly from the common 4:3.

WXGA+ and WSXGA are non-standard terms referring to a computer display resolution of 1440 × 900. Occasionally manufacturers use other terms to refer to this resolution.1440 × 900 resolution as WXGA(II).

WSXGA and WXGA+ can be considered enhanced versions of WXGA with more pixels or as widescreen variants of SXGA. The aspect ratios of each are 16:10 (widescreen).

WXGA+ (1440 × 900) resolution is common in 19-inch widescreen desktop monitors (a very small number of such monitors use WSXGA+), and is also optional, although less common, in laptop LCDs, in sizes ranging from 12.1 to 17 inches.

Super XGA (SXGA) is a standard monitor resolution of 1280 × 1024 pixels. This display resolution is the "next step" above the XGA resolution that IBM developed in 1990.

The 1280 × 1024 resolution is not the standard 4:3 aspect ratio, but 5:4 (1.25:1 instead of 1.333:1). A standard 4:3 monitor using this resolution will have rectangular rather than square pixels, meaning that unless the software compensates for this the picture will be distorted, causing circles to appear elliptical.

There is a less common 1280 × 960 resolution that preserves the common 4:3 aspect ratio. It is sometimes unofficially called SXGA− to avoid confusion with the "standard" SXGA. Elsewhere this 4:3 resolution was also called UVGA (Ultra VGA), or SXVGA (Super eXtended VGA): Since both sides are doubled from VGA the term Quad VGA would be a systematic one, but it is hardly ever used because its initialism QVGA is strongly associated with the alternate meaning Quarter VGA (320 × 240).

SXGA is the most common native resolution of 17-inch and 19-inch LCD monitors. An LCD monitor with SXGA native resolution will typically have a physical 5:4 aspect ratio, preserving a 1:1 pixel aspect ratio.

SXGA is also a popular resolution for cell phone cameras, such as the Motorola Razr and most Samsung and LG phones. Although being taken over by newer UXGA (2.0-megapixel) cameras, the 1.3-megapixel was the most common around 2007.

Any CRT that can run 1280 × 1024 can also run 1280 × 960, which has the standard 4:3 ratio. A flat panel TFT screen, including one designed for 1280 × 1024, will show stretching distortion when set to display any resolution other than its native one, as the image needs to be interpolated to fit in the fixed grid display. Some TFT displays do not allow a user to disable this, and will prevent the upper and lower portions of the screen from being used forcing a "letterbox" format when set to a 4:3 ratio.

The 1280 × 1024 resolution became popular because at 24bit/px color depth it fit well into 4 megabytes of video RAM.1280 × 1024 at 24-bit color depth allowed using 3.75MB of video RAM, fitting nicely with VRAM chip sizes which were available at the time (4MB):

SXGA+ stands for Super Extended Graphics Array Plus and is a computer display standard. An SXGA+ display is commonly used on 14-inch or 15-inch laptop LCD screens with a resolution of 1400 × 1050 pixels. An SXGA+ display is used on a few 12-inch laptop screens such as the ThinkPad X60 and X61 (both only as tablet) as well as the Toshiba Portégé M200 and M400, but those are far less common. At 14.1 inches, Dell offered SXGA+ on many of the Latitude C-Series laptops, such as the C640, and IBM since the ThinkPad T21. Sony also used SXGA+ in their Z1 series, but no longer produce them as widescreen has become more predominant.

WSXGA+ stands for Widescreen Super Extended Graphics Array Plus. WSXGA+ displays were commonly used on Widescreen 20-, 21-, and 22-inch LCD monitors from numerous manufacturers (and a very small number of 19-inch widescreen monitors), as well as widescreen 15.4-inch and 17-inch laptop LCD screens like the Thinkpad T61p, the late 17" Apple PowerBook G4 and the unibody Apple 15" MacBook Pro. The resolution is 1680 × 1050 pixels (1,764,000 pixels) with a 16:10 aspect ratio.

WSXGA+ is the widescreen version of SXGA+, but it is not approved by any organization. The next highest resolution (for widescreen) after it is WUXGA, which is 1920 × 1200 pixels.

UXGA or UGA is an abbreviation for Ultra Extended Graphics Array referring to a standard monitor resolution of 1600 × 1200 pixels (totaling 1,920,000 pixels), which is exactly four times the default image resolution of #SVGA (800×600) (800 × 600) (totaling 480,000 pixels). Dell Inc. refers to the same resolution of 1,920,000 pixels as UGA. It is generally considered to be the next step above SXGA (1280 × 960 or 1280 × 1024), but some resolutions (such as the unnamed 1366 × 1024 and SXGA+ at 1400 × 1050) fit between the two.

UXGA has been the native resolution of many fullscreen monitors of 15 inches or more, including laptop LCDs such as the ones in the IBM ThinkPad A21p, A30p, A31p, T42p, T43p, T60p, Dell Inspiron 8000/8100/8200 and Latitude/Precision equivalents; some Panasonic Toughbook CF-51 models; and the original Alienware Area 51M gaming laptop. However, in more recent times, UXGA is not used in laptops at all but rather in desktop UXGA monitors that have been made in sizes of 20 inches and 21.3 inches. Some 14-inch laptop LCDs with UXGA have also existed (such as the Dell Inspiron 4100), but these are very rare.

WUXGA stands for Widescreen Ultra Extended Graphics Array and is a display resolution of 1920 × 1200 pixels (2,304,000 pixels) with a 16:10 screen aspect ratio. It is a wide version of UXGA, and can be used for viewing high-definition television (HDTV) content, which uses a 16:9 aspect ratio and a 1280 × 720 (720p) or 1920 × 1080 (1080i or 1080p) resolution.

The 16:10 aspect ratio (as opposed to the 16:9 used in widescreen televisions) was chosen because this aspect ratio is appropriate for displaying two full pages of text side by side.

WUXGA resolution has a total of 2,304,000 pixels. One frame of uncompressed 8BPC RGB WUXGA is 6.75MiB (6.912MB). Initially, it was available in widescreen CRTs such as the Sony GDM-FW900 and the Hewlett-Packard A7217A (introduced in 2003), and in 17-inch laptops. Most QXGA displays support 1920 × 1200. WUXGA is also available in some mobile phablet devices such as the Huawei Honor X2 Gem.

The next lower standard resolution (for widescreen) before it is WSXGA+, which is 1680 × 1050 pixels (1,764,000 pixels, or 30.61% fewer than WUXGA); the next higher resolution widescreen is an unnamed 2304 × 1440 resolution (supported by the above GDM-FW900 and A7217A) and then the more common WQXGA, which has 2560 × 1600 pixels (4,096,000 pixels, or 77.78% more than WUXGA).

The QXGA, or Quad Extended Graphics Array, display standard is a resolution standard in display technology. Some examples of LCD monitors that have pixel counts at these levels are the Dell 3008WFP, the Apple Cinema Display, the Apple iMac (27-inch 2009–present), the iPad (3rd generation), the iPad Mini 2, and the MacBook Pro (3rd generation). Many standard 21–22-inch CRT monitors and some of the highest-end 19-inch CRTs also support this resolution.

QWXGA (Quad Wide Extended Graphics Array) is a display resolution of 2048 × 1152 pixels with a 16:9 aspect ratio. A few QWXGA LCD monitors were available in 2009 with 23- and 27-inch displays, such as the Acer B233HU (23-inch) and B273HU (27-inch), the Dell SP2309W, and the Samsung 2343BWX. As of 2011, most 2048 × 1152 monitors have been discontinued, and as of 2013, no major manufacturer produces monitors with this resolution.

QXGA (Quad Extended Graphics Array) is a display resolution of 2048 × 1536 pixels with a 4:3 aspect ratio. The name comes from it having four times as many pixels as an XGA display. Examples of LCDs with this resolution are the IBM T210 and the Eizo G33 and R31 screens, but in CRT monitors this resolution is much more common; some examples include the Sony F520, ViewSonic G225fB, NEC FP2141SB or Mitsubishi DP2070SB, Iiyama Vision Master Pro 514, and Dell and HP P1230. Of these monitors, none are still in production. A related display size is WQXGA, which is a widescreen version. CRTs offer a way to achieve QXGA cheaply. Models like the Mitsubishi Diamond Pro 2045U and IBM ThinkVision C220P retailed for around US$200, and even higher performance ones like the ViewSonic PerfectFlat P220fB remained under $500. At one time, many off-lease P1230s could be found on eBay for under $150. The LCDs with WQXGA or QXGA resolution typically cost four to five times more for the same resolution. IDTech manufactured a 15-inch QXGA IPS panel, used in the IBM ThinkPad R50p. NEC sold laptops with QXGA screens in 2002–05 for the Japanese market.iPad (starting from 3rd generation and Mini 2) also has a QXGA display.

WQXGA (Wide Quad Extended Graphics Array) is a display resolution of 2560 × 1600 pixels with a 16:10 aspect ratio. The name comes from it being a wide version of QXGA1280 × 800) display.

To obtain a vertical refresh rate higher than 40Hz with DVI, this resolution requires dual-link DVI cables and devices. To avoid cable problems monitors are sometimes shipped with an appropriate dual link cable already plugged in. Many video cards support this resolution. One feature that is currently unique to the 30-inch WQXGA monitors is the ability to function as the centerpiece and main display of a three-monitor array of complementary aspect ratios, with two UXGA (1600 × 1200) 20-inch monitors turned vertically on either side. The resolutions are equal, and the size of the 1600 resolution edges (if the manufacturer is honest) is within a tenth of an inch (16-inch vs. 15.89999"), presenting a "picture window view" without the extreme lateral dimensions, small central panel, asymmetry, resolution differences, or dimensional difference of other three-monitor combinations. The resulting 4960 × 1600 composite image has a 3.1:1 aspect ratio. This also means one UXGA 20-inch monitor in portrait orientation can also be flanked by two 30-inch WQXGA monitors for a 6320 × 1600 composite image with an 11.85:3 (79:20, 3.95:1) aspect ratio. Some WQXGA medical displays (such as the Barco Coronis 4MP or the Eizo SX3031W) can also be configured as two virtual 1200 × 1600 or 1280 × 1600 seamless displays by using both DVI ports at the same time.

An early consumer WQXGA monitor was the 30-inch Apple Cinema Display, unveiled by Apple in June 2004. At the time, dual-link DVI was uncommon on consumer hardware, so Apple partnered with Nvidia to develop a special graphics card that had two dual-link DVI ports, allowing simultaneous use of two 30-inch Apple Cinema Displays. The nature of this graphics card, being an add-in AGP card, meant that the monitors could only be used in a desktop computer, like the Power Mac G5, that could have the add-in card installed, and could not be immediately used with laptop computers that lacked this expansion capability.

In March 2009, Apple updated several Macintosh computers with a Mini DisplayPort adapter, such as the Mac mini and iMac. These allow an external connection to 2560x1600 display.

In 2010, WQXGA made its debut in a handful of home theater projectors targeted at the Constant Height Screen application market. Both Digital Projection Inc and projectiondesign released models based on a Texas Instruments DLP chip with a native WQXGA resolution, alleviating the need for an anamorphic lens to achieve 1:2.35 image projection. Many manufacturers have 27–30-inch models that are capable of WQXGA, albeit at a much higher price than lower resolution monitors of the same size. Several mainstream WQXGA monitors are or were available with 30-inch displays, such as the Dell 3007WFP-HC, 3008WFP, U3011, U3014, UP3017, the Hewlett-Packard LP3065, the Gateway XHD3000, LG W3000H, and the Samsung 305T. Specialist manufacturers like NEC, Eizo, Planar Systems, Barco (LC-3001), and possibly others offer similar models. As of 2016, LG Display make a 10-bit 30-inch AH-IPS panel, with wide color gamut, used in monitors from Dell, NEC, HP, Lenovo and Iiyama.

Released in November 2012, Google"s Nexus 10 is the first consumer tablet to feature WQXGA resolution. Before its release, the highest resolution available on a tablet was QXGA (2048 × 1536), available on the Apple iPad 3rd and 4th generations devices. Several Samsung Galaxy tablets, including the Note 10.1 (2014 Edition), Tab S 8.4, 10.5 and TabPRO 8.4, 10.1 and Note Pro 12.2, as well as the Gigaset QV1030, also feature a WQXGA resolution display.

QSXGA (Quad Super Extended Graphics Array) is a display resolution of 2560 × 2048 pixels with a 5:4 aspect ratio. Grayscale monitors with a 2560 × 2048 resolution, primarily for medical use, are available from Planar Systems (Dome E5), Eizo (Radiforce G51), Barco (Nio 5, MP), WIDE (IF2105MP), IDTech (IAQS80F), and possibly others.

Recent medical displays such as Barco Coronis Fusion 10MP or NDS Dome S10 have a native panel resolution of 4096 × 2560. These are driven by two dual-link DVI or DisplayPort outputs. They can be considered to be two seamless virtual QSXGA displays as they have to be driven simultaneously by both dual-link DVI or DisplayPort since one dual-link DVI or DisplayPort cannot single-handedly display 10 megapixels. A similar resolution of 2560 × 1920 (4:3) was supported by a small number of CRT displays via VGA such as the Viewsonic P225f when paired with the right graphics card.

WQSXGA (Wide Quad Super Extended Graphics Array) describes a display standard that can support a resolution up to 3200 × 2048 pixels, assuming a 1.5625:1 (25:16) aspect ratio. The Coronis Fusion 6MP DL by Barco supports 3280 × 2048 (approximately 16:10).

QUXGA (Quad Ultra Extended Graphics Array) describes a display standard that can support a resolution up to 3200 × 2400 pixels, assuming a 4:3 aspect ratio.

WQUXGA (Wide Quad Ultra Extended Graphics Array) describes a display standard that supports a resolution of 3840 × 2400 pixels, which provides a 16:10 aspect ratio. This resolution is exactly four times 1920 × 1200 (in pixels). On their XPS 13 2‑in‑1 (7390) laptop computer Dell seems to have referred to this resolution as "UHD+".

Most display cards with a DVI connector are capable of supporting the 3840 × 2400 resolution. However, the maximum refresh rate will be limited by the number of DVI links connected to the monitor. 1, 2, or 4 DVI connectors are used to drive the monitor using various tile configurations. Only the IBM T221-DG5 and IDTech MD22292B5 support the use of dual-link DVI ports through an external converter box. Many systems using these monitors use at least two DVI connectors to send video to the monitor. These DVI connectors can be from the same graphics card, different graphics cards, or even different computers. Motion across the tile boundary(ies) can show tearing if the DVI links are not synchronized. The display panel can be updated at a speed between 0Hz and 41Hz (48Hz for the IBM T221-DG5, -DGP, and IDTech MD22292B5). The refresh rate of the video signal can be higher than 41Hz (or 48Hz) but the monitor will not update the display any faster even if graphics card(s) do so.

In June 2001, WQUXGA was introduced in the IBM T220 LCD monitor using a LCD panel built by IDTech. LCD displays that support WQUXGA resolution include: IBM T220, IBM T221, Iiyama AQU5611DTBK, ViewSonic VP2290,Hz and 48Hz, made them less attractive for many applications.

After having used VGA-based 3:2 resolutions HVGA (480 × 320) and Retina DVGA (960 × 640) for several years in their iPhone and iPod products with a screen diagonal of 9 cm or 3.5 inches, Apple started using more exotic variants when they adopted the 16:9 aspect ratio to provide a consistent pixel density across screen sizes: first 1136 × 640 (rarely: WDVGA) with the iPhone 5, 5C, 5S and SE 1st for 10-cm or 4-inch screens, and later 1334 × 750 with the iPhone 6, 6S, 7, 8, SE 2nd and SE 3rd for 12-cm or 4.7-inch screens, while devices with 14-cm or 5.5-inch screens used standard 1920 × 1080 with the iPhone 6 Plus, 6S Plus, 7 Plus and 8 Plus. The iPhone X, XS and 11 Pro introduced a 2436 × 1125 resolution for 15-cm or 5.8-inch screens, while the iPhone XS Max and 11 Pro Max introduced a 2688 × 1242 resolution for 17-cm or 6.5-inch screens (with a notch) all at an aspect ratio of roughly 13:6 or, for marketing, 19.5:9.

Other manufacturers have also introduced phones with irregular display resolutions and aspect ratios, e.g. Samsung"s various Infinity displays with 37:18 = 18+1/2:9 (Galaxy S8/S9 and A8/A9), i.e. 2960 × 1440 (Quad HD+, WQHD+) or 2220 × 1080 (Full HD+), and 19:9 (S10) aspect ratios: 3040 × 1440 and 2280 × 1080 (S10e).

Some air traffic control monitors use displays with a resolution of 2048 x 2048, with an aspect ratio of 1:1,Eizo is major supplier of panels and monitors in this aspect ratio. Also in 2022, a 16:18 monitor (in 2560x2880 resolution, named SDQHD) was released for general productivity work by LG Electronics.

VESA CVT 1.2 from 2003 recommends only 4:3, 16:9 and 16:10 (8:5) aspect ratios for newly introduced display resolutions. The discouraged legacy aspect ratios 5:4 and 15:9 (5:3) are only kept for SXGA and WXGA. VESA CVT 1.2

Bhagat, Hitesh Raj; Bajaj, Karan (26 January 2018). "The 18:9 display dilemma: Will the new smartphone screens make our lives easier or do the opposite?". The Economic Times. Bennett, Coleman & Co. Retrieved 2018-10-01.

Anthony, Sebastian (5 September 2014). "Dell unveils 5K desktop monitor with almost 2x the pixels of your puny 4K display". ExtremeTech. Ziff Davis. Retrieved 2014-10-19.

Kwon, Jang Yeon; Jung, Ji Sim; Park, Kyung Bae; Kim, Jong Man; Lim, Hyuck; Lee, Sang Yoon; Kim, Jong Min; Noguchi, Takashi; et al. (2006). "2.2 inch qqVGA AMOLED Drove by Ultra Low Temperature Poly Silicon (ULTPS) TFT Direct Fabricated Below 200°C". SID 2006 Digest. 37 (2): 1358–61. doi:10.1889/1.2433233.

Shin, Min-Seok; Choi, Jung-Whan; Kim, Yong-Jae; Kim, Kyong-Rok; Lee, Inhwan; Kwon, Oh-Kyong (2007). "Accurate Power Estimation of LCD Panels for Notebook Design of Low-Cost 2.2-inch qVGA LTPS TFT-LCD Panel". SID 2007 Digest. 38 (1): 260–263. doi:10.1889/1.2785279.

"ViewSonic Brings World"s Highest Resolution Monitor To Its LCD Lineup" (Press release). ViewSonic. 25 June 2002. Archived from the original on 2002-12-07. Retrieved 2013-05-22.

Looking for a specific TFT resolution? We offer LCD TFTs varying in resolution from 128x160 pixels to 800x480 pixels. Many of our TFT LCDs also have carrier boards to make integrating them into your product as simple as possible. All of our TFT LCDs offer full color RGB. If you"re not finding the correct TFT LCD for your product or project, please contact our support team to see if they can help you find an appropriate TFT display module for you.

No matter the place, whether a Doctor’s office, a modern retail store, or, a fast-paced factory floor, screens have taken the place of posters and print outs to transmit information. Fast to display information of any kind in full colour and pristine detail, LCD screens also increase efficiency and help decrease unnecessary contact.

At Sharp, whether you are looking for a rugged, industrial-grade TFT LCD from our stock line-up, a display with premium out-of-the-box performance under Sharp warranty, or a specialized multi-touch PCAP or High-Brightness value-added solution, we aim to meet both your specifications and budgetary requirements. Plus, our vast engineering resources and technical support gives you the advantage to get to market quickly.