cr 10 lcd screen brands

This is a Genuine Creality LCD screen for their machines that use this type of LCD. See below for a compatibility list. 2 Cables are included with the LCD. Creality LCD knob is included as well. This LCD is the latest version with the EXP1, EXP2, and EXP3 headers.

Tuotteilla on 12 kuukauden takuu, pois lukien resiinit ja filamentit. Takuu ei koske esimerkiksi tulostimen kotelon kulumista tai osien normaalia kulumaa kuten suuttimet lämpövastukset, LCD taulut jne.

You are only responsible for the kind of value decrease of the goods that did not result from treatment that is required for determining the nature, properties and functionality of the goods.

We guarantee your satisfaction on every product we sell with a full refund - and you won"t even need a receipt.* We want you to be satisfied with your Micro Center purchase. However, if you need help or need to return an item, we"re here for you!

*If you are a Micro Center Insider or if you have provided us with validated contact information (name, address, email address), you won"t even need your receipt.

The following products are not eligible for return: VR Headsets, Headphones, including Airpods, Earbuds, Over the Ear Products, Microphones, Microphone Accessories, and Wireless Phones

If you are having issues with a blue or blank screen on your 3D printer, it can be pretty frustrating, but there are a few ways to potentially fix this.

To fix the blue or blank screen on a 3D printer, make sure your LCD cable is connected to the correct port on your machine. You also want to check that your voltage is set correctly based on your region. Changing SD card can help if it is damaged. Reflashing your firmware has worked for many people.

Keep on reading to get more methods to try and important details behind fixing your blue or blank screen, so you can resolve this issue once and for all.

The blue or blank screen on your 3D printer’s LCD panel can appear due to a number of different reasons. I’ll go through all of them below to cover the possibilities and help you quickly get back to 3D printing.

You need to do the following in order to fix the blank blue screen of your Ender 3 3D printer. We’ll first focus on the hardware end of this issue and then get to the firmware part.

One common reason why the Ender 3 can show a blue screen is due to not plugging in your LCD cable in the correct port on your Ender 3. There are three LCD ports that you’ll see on the Ender 3, so ensure that you are using the third port (on the right) to get it working correctly.

The connector should be named EXP3 and it’s keyed so you can only put it in one way. In this step, you also want to unplug the LCD screen altogether and plug it back in.

If your Ender 3 screen isn’t turning on at all, connecting to the right port should usually fix this. Also, you can check whether the cable has come loose from the mainboard.

The Creality Ender 3 has a red voltage switch on the back of the power supply that can be set to either 115V or 230V. The voltage that you set your Ender 3 to depends on what region you are living in.

Double check what voltage you need to set based on where you are living. This is based on your power grid. Many users don’t realize this and end up experiencing a blue or blank screen when trying to use their Ender 3.

Some people have reported that they were using an incorrect voltage for their 3D printer that not only displayed a blank screen on the LCD interface but blew up the power supply as well a little while later.

Several people experiencing the Ender 3 blank blue screen have reported a common fix in regard to their SD card. They were actually using a fried SD card that had stopped functioning and was instead causing the LCD screen to go blank.

Some people have had the screen start working again by turning it off, unplugging everything, leaving it alone for a few days and plugging it back in. This is potentially a temporary fix though because someone who tried this ended up buying a new motherboard.

Your Creality Ender machine has many connections and wiring that need to be plugged in properly to work at its best. In some cases, people have checked their connections and found something slightly loose or not fully connected.

If you experience some kind of glitch in your 3D printer screen, it’s usually do to a cable or wiring being slightly broken, or potential overheating. It could also be a board issue where you should reflash the board. I’d recommend checking your firmware and ensuring you are using the right display.

Many users have experienced a blue or blank screen due to the firmware, whether it hasn’t been flashed properly, they had an error occurred in some of the main configuration files, or you accidentally flashed it without realizing it.

Older Ender 3s didn’t have the new 32-bit motherboards which can be flashed simply by inserting an SD card with the correct file on it. People reported accidentally flashing their firmware and receiving a blue screen afterwards.

If you have the 32-bit motherboard on your Ender machine, you simply have to download the relevant firmware such as the Ender 3 Pro Marlin Firmware from Creality, save the .bin file onto your SD card in the root or original main folder, insert it into your 3D printer and simply turn it on.

I’ve read around about users who got into contact with either Amazon or Creality’s customer service and have been sent a new motherboard, LCD screen or cables to get their screen working again.

You can either choose to go through the Official Creality Facebook Page to ask questions to the active user base, or go to Creality Service Request and put in an application.

If your Ender 3 (Pro) still gives you the blue screen after the firmware update or it isn’t letting you update the firmware in the first place, then this is a good sign that your mainboard has stopped working.

The Creality Ender 3 Pro Upgraded Silent Board Motherboard V4.2.7 on Amazon is a popular choice among people who set out to buy a new mainboard. It’s a top-rated product that brings multiple improvements over the stock mainboard of the Ender 3.

At the time of writing, the Creality Ender 3 Pro Upgraded Silent Board Motherboard V4.2.7 enjoys a solid reputation on Amazon with a 4.6/5.0 overall rating. In addition, 78% of the people who bought it have left a 5-star review.

Users who have encountered an unsolvable Ender 3 Pro blue screen of death decided to opt for this mainboard and found it booting up the LCD screen perfectly.

One strange strategy that worked for one user to fix the blue screen on their Ender 3 was to turn off the 3D printer and manually push the print bed back with a little pressure to have the LCD screen light up.

Oddly the Ender 5+ is supposed to be an upgrade but the Ender 5 (regular) has so much more stuff you can control from the LCD screen. Flow control, PID tuning, etc.

On the Ender 5+ and the CR-10S pro I"m guessing the touchscreen has its own set of firmware files- I am guessing this because I found a set of files for the touchscreen- different color screens and such, but they do not include any uncompiled files nor does the marlin firmware for the CR-10 have any mention of those image files in them.

The Ender 5+ and CR-10s both got rid of the traditional LCD with the wheel in favor of the touchscreen; unfortunately it has a lot less functionality. I don"t know where to find the specs, I got this printer from Creality "official" website but they will not release specs on the boards in this printer, I already emailed them. Here is a pic of the board itself.