difference between digitizer and lcd screen price

The easiest repair for mobile phones to complete is the LCD assembly replacement. This repair takes less than an hour and requires the least amount of technical ability. For some devices the LCD assembly can be replaced simply by removing a few screws and cables. Also, as the assembly includes the glass, touch screen and the LCD, you can be confident it will fix all common screen issues.

For iPad and other tablets, if the screen parts aren"t fused, then you can do a glass touch digitizer only replacement. Otherwise, the full assembly is the easiest repair. Either way, it usually takes 1-2 hours.

While it can be significantly cheaper repair, If the screen parts are fused, the screens must be heated to loosen the adhesive between the screen and LCD and you need special equipment. This includes all iPhone and most other mobile phones and some iPads or tablets. A heat gun or hair dryer can be used for this. The screen is then gently and very slowly pried apart from LCD. DIYers need to use care to insure the LCD is not damaged in the process.

Tip: Transferring the home button on an iPhone or an iPad can be the most tricky part. It takes a little patience and heat. You can purchase screens that have the home button pre-installed (along with other small parts) and this is the easiest of all repair. This can take 15-30 minutes. However, Touch ID function only works with the original home button so you have to transfer if you want to retain it. Note: some of the iPads don"t have a screen replacement option that includes the home button like the iPad Pro and newer iPad Mini. iPad 1st Gen to 9th Gen screens, have a home button pre-installed option.

Your iPod, iPhone and tabletare commonly known to have three key components: a glass panel, digitizer (aka touch screen) and LCD. What are the differences? Let’s clearly define these layers:

Digitizer –The digitizer is located just under the glass screen. It is the electrical force that senses and responds to touch. When you tap your fingertip or swipe it across the screen, the mere touch acts as data input to the device’s center. If your device fails to respond to touch, it’s time for a new digitizer. The digitizer is an electrical mechanism that is fused with the glass screen; so if you need to replace the digitizer, you’ll have to replace the glass, too, and vice versa. UEGoffers a Front Glass (Digitizer Touch Screen) Repair Service on tablets.

Touch Screen –  The term touch screen is interchangeable with the term digitizer. You’ll often see the combined terms Digitizer Touch Screen offered as a repair service.

LCD – LCD is an acronym for liquid crystal display. The LCD is the visual component underneath the glass that displays the image on the screen. UEGoffers LCD repairs on tablets, iPhonesand iPods.

United Electronics Group (UEG) is the parent company of United Camera Repair, United MP3 Repair, United Mac Repair, United Tablet Repair and United Smartphone Repair.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

A touch screen display is usually made with three main parts. The protective glass sheet, the digitizer sheet, and the LCD. The digitizer is a thin transparent sheet that is adhered to the protective glass sheet with a transparent conductive adhesive. The digitizer is the only part of the display assembly that is responsible for sensing touch. Since the human touch is conductive it allows the screen to sense the location you touch. The LCD is only responsible for displaying the image on the screen. If the screen is not responding to touch then usually the digitizer is damaged or faulty. Usually a damaged or cracked LCD will display a distorted image or no image at all. So if the phone displays a good image but does not respond to touch then you may have the option of only replacing the digitizer. It"s not as easy of a repair as replacing the whole display but is cheaper. A new digitizer part already has the digitizer sheet adhered to a protective sheet of glass. If a person can remove the faulty digitizer from the phone without damaging the LCD then it is surely more cost effective repair. Some displays have the digitizer fused to the LCD which makes it hard not to damage the LCD if trying to remove the digitizer. If that is the case with your phone"s display it is a lot easier to just replace the whole display. Hope this information is helpful.

When you drop your device, you may immediately pick it up and try to turn it on to see what happened. Sometimes, the screen will be completely cracked, but there’s still a display. Other times, the screen is cracked and there is no display. A few different things happen when an iPad or iPhone drops. Understanding what happens to the screen can help you know what type of repair you need.

When you drop your iPad or iPhone and the screen doesn’t come on (there is no display) or the display is distorted, it’s likely the LCD screen is broken. This screen has everything to do with seeing what you love about your device. Videos, games, email, and everything else depends on your LCD screen.

Sometimes, you may be able to see the screen, but when you touch it to do something, it won’t react to your touch. This is usually because the digitizer is damaged. Many times, this happens even when you can’t see a crack on your device. This is why many people don’t think they need a screen replacement, and actually, in some cases they still don’t need it. Other components may be damaged that cause the touch not to work, but when those are all working okay, it’s the screen.

There are some cases in which both the LCD and digitizer need to be replaced. If there’s no display or a distorted one AND there’s no touch response, the LCD and digitizer need to be replaced. This is usually what people need when they turn to us with a shattered iPad or iPhone.

If you still don’t know if you should have a LCD or digitizer repair, contact our certified technicians. They can look at your device for free to provide you a repair quote. You can trust our technicians to give you the truth, so you can save money when you may not need both screens replaced. If you do, you can be sure that you’ll receive a quality repair with quality parts.

LCD (liquid crystal display) is the technology used for displays in notebook and other automated industry computers. It is also used in screens for mobile devices, such as laptops, tablets, and smartphones.

Like light-emitting diode (LED) and gas-plasma technologies, LCDs allow displays to be much thinner than cathode ray tube (CRT) technology. LCDs consume much less power than LED and gas-display displays because they work on the principle of blocking light rather than emitting it.

Each LCD touch screen monitor contains a matrix of pixels that display the image on the screen. Early LCDs screen had passive-matrix screens, which controlled individual pixels by sending a charge to their row and column. Since a limited number of electrical charges could be sent each second, passive-matrix screens were known for appearing blurry when images moved quickly on the screen.

Modern LCDs display typically use active-matrix technology, which contains thin film transistors, or TFTs touch screen. These transistors include capacitors that enable individual pixels to "actively" retain their charge. Therefore, the active-matrix LCDs touch panel are more efficient and appear more responsive than passive-matrix displays.

The backlight in liquid crystal display provides an even light source behind the LCD screen. This light is polarized, meaning only half of the light shines through to the liquid crystal layer.

The touchscreen panel a display device that senses physical touch by a person’s hands or fingers, or by a device such as a stylus, and then performs actions based on the location of the touch as well as the number of touches.

Touch screen glass can be quite useful as an alternative to a mouse or keyboard for navigating a graphical user interface. Touch screens are used on a variety of devices such as computer and laptop displays, smartphones, tablets, cash registers, and information kiosks.

A touch-screen digitizer is one piece in a multilayered "sandwich." In modern devices, the screen that produces the images is found at the bottom layer; the digitizer is a transparent sheet that occupies a middle layer on top of the screen, and a thin sheet of hard, protective glass forms the top layer.

Touching the screen triggers touch sensors immediately under your fingertip; a specialized electronic circuit receives signals from these sensors and converts them into a specific location on the screen as X and Y coordinates. The circuit sends the location to software that interprets the touch and location according to the app you"re using.

For example, when you dial a phone number, your fingers touch the numbers on a virtual keypad on the phone"s screen. The software compares the locations touched against the keypad and generates a phone number one digit at a time.

Touch Screen Glass– The bottom layer is the ITO glass, typically thickness is between 1 and 3 millimetre. If you drop your device, the cracked glass ends up resembling an elaborate spiderweb.

Digitizer – The digitizer is located above the glass screen. It is the electrical force that senses and responds to touch. When you tap your fingertip or swipe it across the screen, the mere touch acts as data input to the device’s center. If your device fails to respond to touch, it’s time for a new digitizer.

The touch screen digitizer is an electrical mechanism that is fused with the glass screen; so if you need to replace the digitizer, you’ll have to replace the glass, too, and vice versa.

Touch Screen Panel- Touchscreen is the thin transparent layer of plastic, which reads the signal from the touch and transports it to the processing unit. It is the part that you can touch without disassembling the device.

LCD – LCD display is an acronym for liquid crystal display. The LCD is the visual component underneath the glass that displays the image on the screen. You can not get to the LCD without taking the device apart first.

However, if the digitizer or LCD is also damaged during a fall, that screen no longer carries value because it cannot be refurbished. Repair shops cannot sell broken LCDs to refurbishing companies; therefore, they cannot offset the cost of an LCD repair. That is why repair stores often charge a little extra if there is damage to the LCD or digitizer, to make up for that loss. Repair stores that don’t have an additional charge for an LCD repair typically inflate their glass repair price to make up for the loss from damaged LCDs. If they have one price, that means everyone is paying more to cover the cost of customers who have damaged LCDs and customers who only have cracked glass. This is why TCR separates the price of glass and LCD repairs for you! If you only have cracked glass, you only have to worry about paying to replace the cracked glass.

If your phone or tablet’s glass is shattered there will be cracks or chips on the screen itself. If it is just the glass that is damaged, the device may still function and you may be able to use it normally. If this is the case, it is likely that only the glass needs to be replaced. To prevent further damage to your device it is best to get it repaired quickly. For example, if liquids seep through the cracks it could cause permanent damage to the LCD.

Many people may continue to use their touchscreen with shattered glass and delay fixing the glass on their devices; however, if the touchscreen isn’t responsive, it could be a sign of more significant damage to the device’s digitizer which is integrated with the LCD screen.

A pixelated screen can indicate LCD damage. This would look like a patch of multicolored dots, a line or lines of discoloration, or a screen with rainbow colors. For many people, these colors are an easy way to know that their LCD is broken and that they should get it repaired.

Dropping your phone isn’t the only reason you’ll end up with a pixelated screen. Over time, your screen’s LCD may break down through regular use. This happens to other devices aside from your smartphone or tablet. Pixelation can happen to TVs and computers, too. People typically decide to buy a new device when this happens. Fortunately, with an LCD repair, you can fix the device without needing to replace it.

A black screen or black spots on your smartphone or tablet is an indication of a damaged LCD. Often with a bad LCD, a phone may still turn on and make noises, but there is no clear picture. This does not necessarily mean any other part of the phone is damaged and a simple screen replacement will get it functioning again. Sometimes it can mean a battery or other internal component is damaged. It is best to have a highly qualified phone repair technician diagnose what is wrong so the appropriate repair can be made.

Fortunately, your mobile device is fixable whether you cracked the glass or damaged the LCD. Stop by or call TCR: Triangle Cellular Repair at (919) 263-2699 for a free diagnostic and quick, affordable cell phone repair in Chapel Hill and surrounding areas. We’re always happy to help!

Many technicians start learning how to repair mobile phone from replacement screen and keep repairing without the proper knowledge and skills. We would like to illustrate what are the components in the screen in any touchscreen device. If you are a phone repair technician, this article will benefit you

Digitizer is settled under the glass screen. It is the electrical force that senses and responds to touch. When you tap your finger on the screen, it acts as data input to the device’s center. If your device does not respond to touch, that means your device"s digitizer broken. to replace the digitizer, you’ll have to replace the glass, touchscreen and digitizer which if you have a lack of experience, may take a long time and these parts are easy to break. However, if you are an inexperienced technician, the best and fastest way to repair a broken screen is to replace the whole piece of front Glass with touch screen digitizer.

Touch screen is transportable with the term digitizer. If you are a phone repair technician, you are familiar with OEM iPhone or Samsung screen parts combine with the digitizer with the touchscreen.

LCD is abbreviation from Liquid Crystal Display. The LCD is the visual factor under the glass that displays the image on the screen. you are familiar with the Front Touchscreen & LCD digitizer.

Touchscreen devices consist of numerous different components that must work cohesively together in order to make it functional. The touch sensor, controller, and the software all play important roles. But there’s one component that’s often overlooked in the equation and that’s the touchscreen digitizer. This is the component that allows users to directly interact with what’s on the screen and issue commands.

As you know, touchscreen devices consist of multiple layers each of which serve a different purpose and carry out various functions. The purpose of the touchscreen digitizer glass layer is essentially to translate or convert physical touch commands into digital signals that the device can understand and then carry out.

Commercial and industrial displays such as capacitive and resistive screens all feature touchscreen digitizers that are placed on top of and connected to the LCD layer using a flex cable. While the LCD layer is responsible for displaying sharp and crystal-clear images on the screen, the LCD touchscreen digitizer reads, understands, and translates the commands given so that the device can perform the appropriate functions.

Touchscreen digitizers are fairly common components of modern LCD displays, but not all of them are equipped with one. The sole purpose of an LCD display touchscreen digitizer is to convert touch commands on the top layer into digital data that the device can understand and perform. Once the touch commands are converted into digital data, the device can then perform the required function and change the images displayed on the screen accordingly.

Touchscreen digitizers are made of a single glass layer, which means they can be susceptible to damage if the device is dropped or comes into contact with a brute force. Although the device can still marginally function depending on the extent of the damage to the touchscreen digitizer glass, its functionality and ability to comprehend touch commands may be limited. If the glass is completely shattered, then the device won’t be able to interpret touch commands at all.

The LCD and touchscreen digitizer layers of a device display serve completely different functions, but they work in tandem to maximize user experience and device performance. Since both of these components are made of thin glass layers, they’re not impervious to damages such as cracks or scratches as a result of being dropped or coming into contact with external physical stressors.

If it’s only the touchscreen digitizer that’s broken, you’ll still be able to make out what’s being displayed on the screen by the LCD component for the most part. The only difference is that parts of the screen or the entire screen might be unresponsive to your touch commands as a result of the damages. Moreover, blobs or splotchy images may appear in certain parts of the screen.

This indicates that there’s a disconnection between the touchscreen digitizer and the LCD display, which is preventing the device from performing the desired functions issued by touch commands.

The LCD screen is responsible for the visual component of your device. Pixelation in the form of multicoloured splotches or dots throughout the screen indicates that the LCD component has sustained a certain level of damage. It can be caused by wear and tear over time or if your device sustains physical damage.

A black screen indicates that the LCD layer of the device is damaged. The device itself will most likely still turn on and function like normal, but you won’t be able to see what it’s doing on the screen itself. Typically, this just means that the LCD layer needs to be repaired or replaced. Depending on the extent of the damage, it might be more practical and cost-effective to simply purchase a new device altogether unless you’re still within the warranty period.

Nauticomp Inc. is one of the leading digital device manufacturers and distributors in North America and the UK. We deliver high-quality state-of-the-art commercial and industrial displays that can be custom-tailored according to the specific needs of our customers. Contact ustoday to learn more about our products or to place an order.

My T-Mobile Revvlry screen is broken & i want to fix it, but i am confused on which part of the screen module do i need to fix it. Do i need the Front Glass Only or the Touch Screen or the LCD Display or the LCD + Touch Combo?

The T-Mobile Revvlry screen module is known to have three key components: Glass Panel, Digitizer & Display. To know the differences between different type of parts available for T-Mobile Revvlry, we first need to know what is the function of each of these 3 components of the screen module.

* The Glass Panel or The Front Glass (Top Layer) - This is the top glass layer in the front, which you can touch and feel. Typically less than one millimeter thick, the glass panel does not have a functionality and mostly serves as a protective layer to the screen module.

* The Digitizer (Middle Layer) - A film like component, pasted just below the front glass. When you tap your fingertip or swipe it across the screen, the digitizer senses it and sends data to the phone processor. The digitizer pasted to the front glass together is called as a "Touch Screen".

* The Display or The LCD (Bottom Layer) - The bottom layer which produces the image. The display is the visual component underneath the glass that displays the image on the screen.

Front Glass Only:You need Front Glass when only the front glass is broken / cracked. Means When your phone is working perfectly fine and you can see the display clearly with no black spots & the touch is working fine for all portion of your screen, then you can just buy the front glass and get it replaced in your phone.

Replacing the front glass of a screen module is a very technical procedure and requires lots of experience and machinery. If you don"t know what you need, then better look for other product type.

Touch Screen Digitizer:You need to replace Touch Screen Digitizer for your T-Mobile Revvlry when the phone is working fine, but the phone stops responding to touch. This can happen when you broke the front panel of your phone and it together damaged the digitizer also. If the display your phone is working fine and there is no black spot on your screen, then replacing the Touch Screen is the best alternative.

Again, replacing the touch screen of T-Mobile Revvlry screen module requires technical know how. This procedure also needs some machinery to perform the procedure as the touch is closely pasted on top of the display.

LCD Display:In rare cases the T-Mobile Revvlry display stop functioning properly. This can be due to internal malfunction, water logging, manufacturing defect, etc. In this case, you can replace the LCD Display from the screen module.

Replacing LCD from the screen module will again require technical know how & set of machinery, as you again need to remove the pasted touch digitizer from the LCD display.

LCD with Touch Combo (Folder):This is the complete screen module, means LCD with Touch for T-Mobile Revvlry contains all components of the screen module and is ready for installation in your phone. You can use this part if the screen is broken / cracked or the display stops working.

Replacing Combo (folder) in your T-Mobile Revvlry is a much easier task and can be easily performed by a little technical know how or using some YouTube videos.

This sections lists some of the frequently asked questions about T-Mobile Revvlry. Mostly related to spare parts and accessories for the handset. If interested in knowing more about the same, just click on the question to read detailed answer.

As an official phone repair provider who has been in the business for almost a decade, one unique question people ask when they visit our service centres to replace their phone screen is: "what"s the difference between original and copy phone screen?"

Well, the answer is, there are many differences between these two screens, which is mostly in their quality. And while “copy” phone screens are somewhat cheaper than the originals, it doesn’t justify the difference in quality. So, before you regret replacing your phone screen with a forbidden part, the tips below will tell you the critical differences between original and copy phone screens.

Generally, phone screens manufactured from your brand"s factory are the original ones while ‘Copy’screens are the ones designed and produced by third-party manufacturers and factories that are not related to your brand.

Many people usually like to go for copy screens because of their cheaper price. However, the "real" differences between original and copy screens lie in their quality, and here’s what you need to know about them.

One of the principal issues with "copied" phone screens and why it differs from the originals is touch and digitizer problems. And that"s a big problem since you"re going to control the device with the touchscreen anyway.

As far as we could remember, phone manufacturers build the touch panel/digitizer with the LCD itself, while the copied screen manufacturer build it separately on the surface glass. Hence, there"s a difference in touch sensitivity. Additionally, copied phone screens usually drop the high touch sampling rate, meaning your screen may not respond to your touches faster.

Here"s also another major issue with the digitizer on copied phone screens. When you crack a copied screen accidentally, the touchscreen stops working, stopping you from accessing the device until you fix it again. Meanwhile, the touch on the original phone screen works perfectly, even after undergoing severe cracking.

Besides having touch problems, most copy phone screens usually have poor display properties. That means you get lower brightness, colour accuracy, sharpness, contrast, etc. And when the display isn"t great, watching movies and viewing other content becomes boring.

For instance, if the original screen is supposed to have 480 nits of brightness, but the copy screen has just 200 nits, the screen becomes unusable under bright lights. Moreso, copied phone screen seems to have more blue light, which, in return, affect your sight and disrupts your sleep at night.

Among others, copied phone screens drop higher refresh rates, and that"s a bummer since most phones come with at least 90Hz refresh rate screens. What that means is the copied screen won’t feel smooth as it’s supposed to be.

It"s not all about the display quality. A copy phone screen may also affect other parts of the phone system if its specifications don"t tally with the original one. In such a case, it could drain your battery at an alarming rate, or at worse, damage your backlight.

If you happen to have a phone with an in-display fingerprint sensor, then replacing its screen with a copied one is not an option – it’s going to mess with your fingerprint accuracy.

We know copied phone screens for their poor quality, and it also extends to the fingerprint sensor. Hence, it takes a longer time to unlock your device. And in other cases, the security of the sensor is not accurate. We"ve seen situations where phones get unlocked with many unregistered fingers after replacing the screen with a copied one.

If you care about your phone"s security and you don"t want a sluggish fingerprint sensor, then we recommend you only go for the original phone screen replacement.

That brings us to the last difference we’re going to mention between copied and original phone screens. They manufacture copied phone screens with poor glass materials. Hence, they break quicker than the originals. And when they do, you’ll be left with only one option: to replace the screen again.

The major reason for choosing the official service centre over third-party/local repair shops summarizes what we"ve said earlier. The official service centre is the reliable place to get original phone screen replacement parts.

Why? As of today, smartphone phone manufacturers/brands release genuine spare parts only to the official service centres and affiliated repair centres. That means third party repair shops get their spare parts somewhere else: usually third-party factories/companies not related to your phones brand.

Besides offering you the original screen spare parts, the official service centres also have other advantages. These include certified and well-experienced technicians to fix the screen, the use of modern tools that won"t damage your phone further, and most importantly, a reliable warranty. Local repair shops usually don"t offer these features; most especially a reliable warranty, which means you"re on your own if the replaced screen gets faulty afterwards.

As far as choosing the official service centre is concerned for genuine screen replacement, then you shouldn"t shy away from Carlcare Service if you own a TECNO, Infinix, or itel phone with a cracked screen.

We"re the official service center for these three brands to cater for your mobile repair needs. And for screen replacement, Carlcare delivers excellently. Our brand-trained technicians replace your cracked screen with genuine OEM parts at affordable rates.

We understand you have a busy schedule; and yes, we"ll replace your screen in the shortest possible time. Start by checking how much it cost to fix your cracked phone screen, then you can book an online reservation service with us to reduce your waiting time and also become a VIP customer.

APO/FPO, Africa, Alaska/Hawaii, Albania, American Samoa, Andorra, Asia, Bermuda, Bosnia and Herzegovina, Central America and Caribbean, Cook Islands, Fiji, French Polynesia, Gibraltar, Greenland, Guam, Guernsey, Jersey, Kiribati, Liechtenstein, Macedonia, Marshall Islands, Mexico, Micronesia, Middle East, Nauru, New Caledonia, Niue, Palau, Papua New Guinea, Russian Federation, Saint Pierre and Miquelon, San Marino, Serbia, Solomon Islands, South America, Southeast Asia, Svalbard and Jan Mayen, Tonga, Tuvalu, US Protectorates, Ukraine, Vanuatu, Vatican City State, Wallis and Futuna, Western Samoa

I need to replace my cracked digitizer/glass on my OnePlus One and it seems changing only the digitizer is kinda hard so next thing is to get the full LCD to replace.

It seems logical that lcd + frame is easier but it seems it requires to move components/motherboard around which for me seems more prone to mistakes and problems then just buying an LCD and putting it into my old frame.

When customers visit a shop for a screen repair, some shops will give them an option to choose between an original screen and a ‘copy’ screen. Most of the time, the first question that a customer asks is “What’s the difference between the two?” Originals are manufactured for Apple while copy screens are only compatible replacements that are manufactured by third party companies. Most of the time, customers choose the relatively affordable copy rather than the original because of the price distinction, but original iPhone screens are still recommended because of its far higher quality.

One of the most noticeable differences between an original and a copy is how the touch sensor also called the digitizer is designed. Original Apple screens manufacture digitizers as part of the LCD while copy screens manufacture it on the glass.

There are some companies that manufacture bare LCDs themselves, but these LCDs are also bought by other companies, who in turn add the other parts to create a complete working screen. Because of this, it is possible that you get a great LCD screen, but the digitizer is poor quality.

, iPhones transferred the chips necessary for the digitizer to work directly on the LCD, that means that when you buy a ‘copy screen’ for these models, you are not only getting a copy of the screen but a copy of the chip.

When you buy a copy screen you are also buying a low image quality for your phone. This is because the LCD is of poor quality. The problems experienced are weak brightness, contrast and vibrancy, grainy appearance because of low image resolution and lower refresh rate.

In most cases, the performance specification of copy screens is not identical to the original ones. As a result, the battery of the phone drains faster and the OS or operating system is misled. This mismatch is also a possible cause of damage to your backlight.

Copy screens can also create damage to your phone’s touch ID fingerprint reader. The home button flexes on the copy screens design which makes it stop working, and we all know the struggle of not having a working ID fingerprint reader.

Some shops offer copy screens to remain competitive in the market since the difference in price ranges to £20-30. Still, you can get the most of your money with the original for having a better performing iPhone screen. Even though there are different qualities of copy screens, from good copies that actually work to cheaply made ones, there are several factors at play to have your iPhone be used seamlessly. Aside from the points above, one of the factors that might affect the use of your phone with a copy is the Apple updates that conflict with the low grade copy screens.

Eventually, it is your decision whether to choose an original one or not. But additional pounds for an original screen is a good investment. You can avoid all the possible damage caused by copy screens which in turn will help you save money in the long run since you won’t need to return to a shop for further repairs.

If you have any concerns and questions, don’t hesitate to call us at 01179424400 or send us a message at support@letstalktps.com. Our friendly team will be happy to help you.

Most of the time people don’t know the difference between a touchscreen and a LCD screen. When there are dark black blobs on your screen, it’s not because the display screen is damaged, it is the caused due to the damage in the LCD of your mobile phone whereas when there are cracks on your screen its mainly due to the damaged caused to your touchscreen and as compared to an LCD screen it is easier to fix as you only need to replace the display screen of you mobile phone.

An LCD is the part of a phone that displays the image we see on screen. It is the layer which produces and displays the image, therefore if the LCD is damaged you can still use the touchscreen although the panel would have either the aforementioned dark black blobs or the spider web type dark cracks on the display or both it would still function normally. To repair the LCD, a technician would have to pull apart the phone part by part to reach the LCD and assess the damage done which is not required for a touch screen. LCD, which is a liquid crystal display, is widely used in mobile phones as it uses low power and produces good quality images.

The images which are displayed in a LCD are produced through small elements which are called pixels. Pixel is a word everybody is familiar with but what exactly is a pixel? Pixel is made up of a layer of molecules lined up between two transparent electrodes and polarizing filters. There are several types of LCDs, reflective, transmissive and transflective, each has a specific function. A transmissive LCD can produce a clear and good quality image in low light while Reflective screen can produce a very good image in bright light. The transflective screen as the name indicates can produce a good quality image in both conditions, hence it is a mixture of both transmissive and reflective LCD.

Touchscreen is now a part of almost every digital gadget in the 21st century. From mobile phones and laptops to TVs and switch boards, it is now used almost everywhere your eyes fall on. But what exactly is a touchscreen? A touchscreen is basically a device which allows us to directly interact by using our fingers or a stylus. The stylus is a special kind of pen whose tip is covered with a unique coating which allows it to directly interact with the computer. We can use one finger or multiple gestures to interact with a touchscreen device. It doesn’t require a mouse or any alternative device such as a keyboard for navigation. A touchscreen can use several methods to sense our finger, it can use a grid which consists of infrared beams or it can use touch sensitive units to sense our gestures.

With touchscreen, there are several gestures that we can make which would be quite tiresome if we use a mouse or a keyboard like when we double tap the screen while using gallery or while reading a pdf file the screen tends to zoom in and when we double tap again it zooms out similarly we can easily drag different icons and swipe to scroll upwards, downwards even sideways. A touch screen is also referred to as an input device as it takes input directly from the user. The computers require a mouse which makes them hard to use but touchscreen is very simple to use as you are directly interacting with the icons, it is also cost efficient to manufacture touchscreen as it does not require buttons for each icon.

In conclusion it can be said that LCD and Touch Screen have very different functions which makes them different from each other. One deals with production of images and the other deals with receiving the input from the user directly. Although they are different, they are equally important for a digital device.