toshiba lcd panel lock supplier

You may be able to turn the Panel Lock feature off by pressing the “Volume Down” button on the front of your TV for more than 10 seconds. Save your PIN code in a secure location where it is accessible only to you or other authorized persons.

To factory reset your Toshiba television, you’ll need to grab your remote and press the Menu button. You will then see the settings icon in the upper right-hand corner of your screen. You will need to navigate to that icon and select it. Next, you will see the Storage & Reset menu.

A remote control that will not respond or control your TV usually means low batteries. Make sure you are pointing the remote at the TV. There also may be something interfering with the signal such as other electronics, certain types of lighting, or something blocking the TV remote sensor.

On average, Toshiba TVs will last up to 7 years if properly used and maintained. As the TVs approach the end of their lifespans, they often show some signs that they may be on their way out. You are probably eager to know the signs Toshiba TV will show when it’s time to replace it.

Reset Your Toshiba Smart TV: Switch off the TV for few minutes, then press and hold the power button on your TV for at least 30 seconds to reset it. Still it is not working, it may be problem with defective power supply board then replace the board.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

With the ability to attach up to six USB devices simultaneously, together with HDMI, Display and GigaLAN Fast Ethernet ports, Toshiba’s Hi Speed Port Replicator III delivers comprehensive connectivity and lightning-fast performance to your laptop – with no cables in sight. Simply plug in your machine and enjoy immediate access to all your peripherals, from printers, storage and screens to keyboards, mice and power sources. It’s the perfect way to stay productive while keeping your workspace the way you want it.

Are you going to buy Toshiba High Speed Replicator 180W With Balance Lock? All the products from Toshiba have the best quality so that you can enjoy your activities without any complications. Place your order of Toshiba High Speed Replicator 180W With Balance Lock and receive it in a few days. Our aim at techinn is to make good deals accessible to all. We have a large offering of electronics and computers equipment and life style items that is unique.

Owner’s Manual Integrated High Definition LCD Television HIGH-DEFINITION TELEVISION 40SL412U 46SL412U 55SL412U 55S41U Owner’s Record The model number and serial number are on the back For an overview of steps for setting up your new TV, see page 11. of your TV. Record these numbers in the spaces below. Note: To display a High Definition picture, the TV must be receiving Refer to these numbers whenever you communicate a High Definition signal (such as an over-the-air High Definition with your Toshiba dealer about this TV. TV broadcast, a High Definition digital cable program, or a High Definition digital satellite program). For details, please contact Model number: your TV antenna installer, cable provider, or satellite provider. Serial number: © 2011 TOSHIBA CORPORATION All Rights Reserved

Dear Customer, Thank you for purchasing this Toshiba LCD TV. This manual will help you use the many exciting features CHILD SAFETY: It Makes A Difference How and Where You Use Your Flat of your new LCD TV. Before operating your LCD TV, Panel Display please read this manual completely, and keep it nearby for future reference. Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: Safety Precautions The Issue WARNING: TO REDUCE THE RISK OF FIRE • The home theater entertainment experience is a growing trend OR ELECTRIC SHOCK, DO NOT EXPOSE THIS and larger flat panel displays are popular purchases. However, APPLIANCE TO RAIN OR MOISTURE. flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations. WARNING • Flat panel displays that are RISK OF ELECTRIC inappropriately situated on dressers, SHOCK DO NOT OPEN. bookcases, shelves, desks, speakers, chests, or carts may fall WARNING: TO REDUCE THE RISK OF ELECTRIC over and cause injury. SHOCK, DO NOT REMOVE COVER (OR BACK). TOSHIBA Cares! NO USER-SERVICEABLE PARTS INSIDE. • The consumer electronics industry REFER SERVICING TO QUALIFIED SERVICE is committed to making home PERSONNEL. entertainment enjoyable and safe. Tune Into Safety The lightning flash with arrowhead symbol, within an • One size does NOT fit all. Follow the manufacturer’s recommendations equilateral triangle, is intended to alert the user to the for the safe installation and use of your flat panel display. presence of uninsulated “dangerous voltage” within the • Carefully read and understand all enclosed instructions for product’s enclosure that may be of sufficient magnitude proper use of this product. to constitute a risk of electric shock to persons. • Don’t allow children to climb on or play with furniture and television sets. The exclamation point within an equilateral triangle is • Don’t place flat panel displays on furniture intended to alert the user to the presence of important that can easily be used as steps, such operating and maintenance (servicing) instructions in as a chest of drawers. the literature accompanying the appliance. • Remember that children can become excited while watching a program, especially on a “larger WARNING than life” flat panel display. Care To prevent injury, this apparatus must be securely should be taken to place or install the display where it cannot be attached to the floor/wall in accordance with the pushed, pulled over, or knocked down. installation instructions. See item 25 on page 4. • Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be WARNING: If you decide to wall mount this pulled or grabbed by curious children. television, always use a UL Listed wall bracket Wall Mounting: If you decide to wall mount your appropriate for the size and weight of this television. flat panel display, always: The use of any wall bracket other than a UL Listed • Use a mount that has been recommended by the display wall bracket appropriate for the size and weight of this manufacturer and/or listed by an independent laboratory (such television for wall mounting this television could result as UL, CSA, ETL). in serious bodily injury and/or property damage. See • Follow all instructions supplied by the display and wall mount “Removing the Pedestal Stand” ( page 6). manufacturers. • If you have any doubts about your ability to safely install your flat panel display, contact your retailer about professional NOTE TO CATV INSTALLERS installation. • Make sure that the wall where you are mounting the display is This is a reminder to call the CATV system installer’s appropriate. Some wall mounts are not designed to be mounted attention to Article 820-40 of the U.S. NEC, which to walls with steel studs or old cinder block construction. If you provides guidelines for proper grounding and, in are unsure, contact a professional installer. particular, specifies that the cable ground shall be • A minimum of two people are connected to the grounding system of the building, required for installation. Flat panel as close to the point of cable entry as practical. For displays can be heavy. additional antenna grounding information, see items 32 and 33 on page 4. 2

• NEVER allow your body to come in contact with any Important Safety Instructions broken glass or liquid from the damaged television. 1) Read these instructions. The LCD panel inside the TV contains glass and a toxic liquid. If the liquid comes in contact with your mouth 2) Keep these instructions. or eyes, or your skin is cut by broken glass, rinse the 3) Heed all warnings. affected area thoroughly with water and consult your 4) Follow all instructions. doctor. • ALWAYS contact a service technician to inspect the TV 5) Do not use this apparatus near water. any time it has been damaged or dropped. 6) Clean only with dry cloth. 15) CAUTION: 7) Do not block any ventilation openings. Install in • To reduce the risk of electric shock, do not accordance with the manufacturer’s instructions. use the polarized plug with an extension cord, receptacle, or other outlet unless the blades can 8) Do not install near any heat sources such as be inserted completely to prevent blade exposure. radiators, heat registers, stoves, or other apparatus • To prevent electric shock, match wide blade of plug (including amplifiers) that produce heat. to wide slot; fully insert. 9) Do not defeat the safety purpose of the polarized 16) CAUTION: or grounding type plug. A polarized Wide blade Do not let children swallow the product or play with plug has two blades with one wider the plastic bag. Keep the product and the plastic bag than the other. A grounding type plug out of the reach of children. has two blades and a third grounding prong. The wide blade or the third 17) CAUTION: prong are provided for your safety. If the provided plug Do not let water or other liquids come into contact does not fit into your outlet, consult an electrician for with the product, as it may result in damage. replacement of the obsolete outlet. 18) WARNING: 10) Protect the power cord from being walked on • To prevent the spread of fire, keep candles or other or pinched, particularly at plugs, open flames away from this product at all times. convenience receptacles, and the point • Keep the product away from direct sunlight, fire or where they exit from the apparatus. a heat source such as a heater. This may reduce the product lifetime or result in fire. 11) Only use attachments/accessories specified by the manufacturer. Installation, Care, and Service 12) Use only with the cart, stand, tripod, bracket, or Installation table specified by the manufacturer, or sold with Follow these recommendations and precautions and the apparatus. When a cart is used, use heed all warnings when installing your TV: caution when moving the cart/apparatus combination to avoid injury from tip- 19) WARNING: NEVER expose batteries over. to excessive heat such as sunshine, fire, or the like. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 20) ALWAYS plug the product into an outlet that is located in such a manner that it can be easily 14) Refer all servicing to qualified service personnel. unplugged in case the product requires service. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or 21) NEVER route the product’s power cord inside a wall plug is damaged, liquid has been spilled or objects or similar enclosed area. have fallen into the apparatus, the apparatus has 22) Never modify this equipment. Changes or been exposed to rain or moisture, does not operate modifications may void: a) the warranty, and b) the normally, or has been dropped. user’s authority to operate this equipment under the rules of the Federal Communications Commission. Additional Safety Precautions 23) DANGER: RISK OF SERIOUS PERSONAL 14a)CAUTION: If the TV is dropped and the cabinet or INJURY, DEATH, OR enclosure surface has been damaged or the TV does not EQUIPMENT DAMAGE! operate normally, take the following precautions: Never place the TV on an unstable • ALWAYS turn off the TV and unplug the power cord to cart, stand, or table. The TV may fall, avoid possible electric shock or fire. causing serious personal injury, death, or serious damage to the TV. (continued) 3

24) To avoid damage to this product, never place or store 33) DANGER: RISK OF SERIOUS the TV in direct sunlight; hot, humid areas; or areas PERSONAL INJURY OR DEATH! subject to excessive dust or vibration. 25) Always place the TV on the floor or a sturdy, level, • Use extreme care to make sure you are never in stable surface that can support the weight of the unit. a position where your body (or any item you are To secure the TV, use a sturdy strap from the hook(s) in contact with, such as a ladder or screwdriver) on the rear of the TV to a wall stud, pillar, or other can accidentally touch overhead power lines. immovable structure. Make sure the strap is tight, Never locate the antenna near overhead power secure, and parallel to the floor. lines or other electrical circuits. • Never attempt to install any of the following Sturdy strap (as short as possible) during lightning activity: a) an antenna system; 4" or b) cables, wires, or any home theater min. Hook component connected to an antenna or phone system. TV side TV top Care 26) The apparatus should not be exposed to dripping or splashing. Objects filled with liquids should not be For better performance and safer operation of your TOSHIBA placed on the apparatus. TV, follow these recommendations and precautions: 27) Never block or cover the slots or openings in the TV 34) If you use the TV in a room whose temperature is cabinet back, bottom, and sides. Never place the TV: 32 °F (0 °C) or below, the picture brightness may • on a bed, sofa, rug, or vary until the LCD warms up. This is not a sign of similar surface; malfunction. • too close to drapes, 35) Always unplug the TV before cleaning. Gently curtains, or walls; or wipe the display panel surface (the TV screen) • in a confined space such using a dry, soft cloth as a bookcase, built-in (cotton, flannel, etc.). A cabinet, or any other place with poor ventilation. hard cloth may damage The slots and openings are provided to protect the the surface of the panel. TV from overheating and to help maintain reliable Avoid contact with operation of the TV. Leave a space of at least 4 (four) alcohol, thinner, benzene, inches around the TV. acidic or alkaline solvent cleaners, abrasive cleaners, or chemical cloths, which may damage 28) Always place the back of the television at least four the surface. Never spray volatile compounds such (4) inches away from any vertical surface (such as a as insecticide on the cabinet. Such products may wall) to allow proper ventilation. damage or discolor the cabinet. 29) Never allow anything to rest on or roll over the power cord, and never place the TV where the power cord is 36) Never hit, press, or place anything on the back cover. subject to wear or abuse. These actions will damage internal parts. 30) Never overload wall outlets and extension cords. 31) Always operate this equipment from a 120 VAC, 60 Hz power source only. 32) Always make sure the antenna system is properly grounded to provide adequate protection against voltage surges and built-up static charges (see 37) Section 810 of the National Electric Code). WARNING: Antenna lead-in wire RISK OF ELECTRIC SHOCK! Antenna discharge unit Never spill liquids or push objects of any kind into (NEC Section 810-20) the TV cabinet slots. Ground clamp Grounding conductors 38) While it is thundering, do not touch the Electric service (NEC Section 810-21) connecting cables or apparatus. equipment Power service grounding 39) For added protection of your TV from lightning electrode system and power surges, always unplug the power Ground clamps (NEC Art 250 Part-H) 4

cord and disconnect the antenna from the TV if Choosing a location for your LCD TV you leave the TV unattended or unused for long periods of time. To Display your LCD TV on the included Pedestal Stand: 40) ALWAYS unplug the TV to completely disconnect from mains power. When the TV is turned off using Observe the following safety precautions: the on/off switch, it is not completely disconnected 1) Read and Follow the pedestal assembly instructions from power and a minute amount of current is still included with the pedestal. consumed. CAUTION: Before beginning pedestal assembly, 41) During normal use, the TV may make occasional carefully lay the front of the LCD Panel face down on snapping or popping sounds. This is normal, a flat, cushioned surface such as a quilt or blanket. especially when the unit is being turned on or off. Leave the bottom of the unit protruding over the edge If these sounds become frequent or continuous, of the surface and assemble the pedestal as indicated unplug the power cord and contact a Toshiba below. Authorized Service Provider. Note: Extreme care should always be used when attaching the pedestal stand to avoid 42) DANGER: RISK OF SERIOUS damage to the LCD panel. PERSONAL INJURY OR DEATH! 2) Place the TV on a sturdy, level surface that can support the weight of the TV. 3) Be sure to secure the TV to a wall, pillar, surface, or Never strike the screen other immovable structure ( item 25, page 4). with a sharp or heavy object. To Display your LCD TV using a Wall 43) • The LCD screen of this product can be damaged by Bracket: ultraviolet radiation from the sun. When selecting If you decide to wall mount your LCD TV, always use a location for the television, avoid locations where a UL listed wall bracket appropriate for the size and the screen may be exposed to direct sunlight, weight of the LCD TV ( page 2): such as in front of a window. 1) CAUTION: Two people are required for installation. • Never touch, press, or place anything on the LCD 2) Unplug and remove any cables and/or other screen. These actions will damage the LCD screen. component connectors from the rear of the TV. If you need to clean the LCD screen, follow the 3) Remove the screws of the VESA Mounting Pattern instructions in item 35 on page 4. show in the next page. Service CAUTION: Do not use the screws removed from the back cover to attach the wall mount bracket to 44) the TV. WARNING: 4) Always use the screws supplied or recommended RISK OF ELECTRIC SHOCK! by the wall mount manufacturer. Never attempt to service the TV yourself. Opening 5) Follow the instructions provided with your wall and removing the covers may expose you to bracket. Before proceeding, make sure the dangerous voltage or other hazards. Failure to follow appropriate bracket(s) are attached to the wall and this WARNING may result in death or serious injury. the back of the TV as described in the instructions Refer all servicing not specified in this manual to a provided with the wall bracket. Toshiba Authorized Service Provider. 6) After attaching the appropriate bracket(s) to the 45) If you have the TV serviced: wall and the back of the TV, remove the pedestal • Ask the service technician to use only replacement stand from the TV as described on the following parts specified by the manufacturer. page 6. • Upon completion of service, ask the service technician to perform routine safety checks to determine that the TV is in safe operating condition. 5

7) VESA Mounting Pattern 46” TV TV Size Hole Pattern(HxV) Screw Size VESA Mounting Pattern 40” 200x200 mm M6 46’’ 400x400 mm M8 55’’ 400x400 mm M8 (unit in mm) Removing the Pedestal Stand 1) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface. Four screws Note: Extreme care should always be used Hook when removing the pedestal stand to avoid Four screws Sturdy strap damage to the LCD panel. (as short as possible) 2) Remove the four screws shown in the below diagram. This will allow removal of the pedestal 55” TV stand. 3) Once you have removed all four screws holding VESA Mounting Pattern the pedestal stand in place, remove the pedestal stand from the TV. 40” TV VESA Mounting Pattern Four screws Hook Four screws Sturdy strap (as short as possible) Four screws Hook Sturdy strap CAUTION: Always place the TV on the floor or a sturdy, Four screws (as short as possible) level, stable surface that can support the weight of the unit. To secure the TV, use a sturdy strap from the hook(s) on the rear of the TV to a wall stud, pillar, or other immovable structure. Make sure the strap is tight, secure, and parallel to the floor. 6

FCC Declaration of Conformity ENERGY STAR® User Compliance Statement (Part 15): Information: Toshiba 40SL412U, 46SL412U, 55SL412U, and ENERGY STAR User Information Statement: the 55S41U Television models factory default settings of this television meet ENERGY comply with Part 15 of the FCC rules. STAR requirements. Changing Picture Settings may Operation is subject to the following two conditions: increase energy consumption, possibly beyond the limits (1) This device may not cause harmful interference, and required for ENERGY STAR qualification. (2) This device must accept any interference received, To ensure your television is operating at optimal energy including interference that may cause undesired efficiency, select [Home] mode during initial activation. operation. To return to [Home] mode settings, select [Standard] The party responsible for compliance to these rules is: picture mode. [Standard] mode is recommended for Toshiba America Information Systems, Inc. normal home use. 9740 Irvine Blvd.; Irvine CA 92618 ENERGY STAR® qualified TV. Ph: 1-800-631-3811 Products that earn the ENERGY Note: This equipment has been tested and found STAR prevent green house gas to comply with the limits for a Class B digital emissions by meeting strict guidelines device, pursuant to Part 15 of the FCC rules. set by the U.S. Environmental These limits are designed to provide reasonable Protection Agency. ENERGY STAR protection against harmful interference in a and the ENERGY STAR mark are residential installation. This equipment generates, registered U.S. marks. uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no Important notes about your guarantee that interference will not occur in a LCD TV particular installation. If this equipment does cause harmful interference to radio or television The following symptoms are technical limitations reception, which can be determined by removing of LCD Display technology and are not an and applying power to the equipment, the user is indication of malfunction; therefore, Toshiba is encouraged to try to correct the interference by not responsible for perceived issues resulting from one or more of the following measures: these symptoms. 1) An afterimage (ghost) may appear on the screen if • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and a fixed, nonmoving image is displayed for a long the receiver. period of time. The afterimage is not permanent • Connect the equipment into an outlet on a circuit and will disappear in a short period of time. different from that to which the receiver is connected. 2) The LCD panel contained in this TV is • Consult the dealer or an experienced radio/TV manufactured using an extremely high level technician for help. of precision technology; however, there may be an occasional pixel (dot of light) that does Caution: Changes or modifications to this not operate properly (does not light, remains equipment not expressly approved by Toshiba constantly lit, etc.). This is a structural property of could void the user’s authority to operate this LCD technology, is not a sign of malfunction, and equipment. is not covered under your warranty. Such pixels are not visible when the picture is viewed from a normal viewing distance. Note: Interactive video games that involve shooting a “gun” type of joystick at an on- screen target may not work with this TV. 7

Contents Important Safety Instructions..................................... 3 Adjusting the audio quality.........................................................38 Installation, Care, and Service................................... 3 Selecting the optical audio output format...................................39 Chapter 1: Introduction...........................................10 Using the Dolby® Digital Dynamic Range Control feature.......39 Using the Locks menu................................................................39 Features of your new TV............................................................10 Entering the PIN code.................................................................39 Overview of steps for installing, setting up, and using If you cannot remember your PIN code.....................................39 your new TV........................................................................11 Changing your PIN code............................................................40 TV front and side panel controls and connections.....................12 Blocking TV programs and movies TV back panel connections.........................................................13 by rating (V-Chip)........................................................40 Chapter 2: Connecting your TV..................................14 Downloading an additional rating system for blocking TV Overview of cable types..............................................................14 programs and movies...................................................40 About the connection illustrations..............................................14 Unlocking programs temporarily...............................................42 Connecting a VCR and antenna, Cable TV or Camcorder........15 Using the input lock feature........................................................42 Connecting a DVD player with ColorStream® Locking channels........................................................................42 (component video), a VCR, and a satellite receiver...........16 Using the GameTimer®. .............................................................42 Connecting an HDMI® or DVI device to the HDMI input........17 Using the panel lock feature.......................................................43 REGZA-LINK® connection........................................................18 Using the PC settings feature......................................................43 Connecting a digital audio system..............................................19 Setting the PC Audio...................................................................44 Connecting an audio system.......................................................19 Using the Media Player..............................................................44 Connecting a personal computer (PC)........................................20 Using the Media Player with USB.............................................44 Chapter 3: Using the remote control............................21 To select the Auto Start function................................................44 Installing the remote control batteries........................................21 To open the Media Player ..........................................................44 Remote control effective range...................................................21 Viewing photo files ....................................................................45 Learning about the remote control.............................................22 Single View.................................................................................45 Chapter 4: Menu layout and navigation........................23 Slideshow....................................................................................45 Main menu layout.......................................................................23 Playing music files......................................................................45 Setup/Installation menu layout...................................................24 Viewing photo files and playing music files Navigating the menu system.......................................................24 at the same time...........................................................46 Chapter 5: Setting up your TV....................................25 Setting the sleep timer.................................................................47 Initial Setup.................................................................................25 Automatic Power Down..............................................................47 Selecting the menu language......................................................25 No Signal Power Down..............................................................47 Configuring the antenna input source for the Using REGZA-LINK®...............................................................48 ANT/CABLE terminal........................................................25 REGZA-LINK® playback device (DVD player, etc.) Programming channels into the TV’s channel memory.............26 control .........................................................................48 Programming channels automatically........................................26 REGZA-LINK® input source selection......................................48 Setting channel skip....................................................................26 VOLUME and MUTE controls of Audio Receiver...................49 Setting the HDMI® audio mode..................................................27 Other REGZA-LINK® functions................................................49 Viewing the digital signal meter.................................................28 Displaying TV status information..............................................49 Setting the time zone...................................................................28 Understanding the last mode memory feature...........................50 Viewing the system status...........................................................28 Chapter 7: Using the TV’s advanced features.................51 Chapter 6: Using the TV’s features..............................29 Using the advanced picture settings features.............................51 Selecting the video input source to view....................................29 Using Dynamic Contrast............................................................51 Labeling the video input sources................................................29 Using the static gamma feature..................................................51 Tuning channels..........................................................................30 Selecting the color temperature..................................................51 Tuning channels using the Channel Browser™. .........................30 Using the ClearFrame™ feature Setting the Channel Tuning Mode..............................................32 (For 46SL412U, 55SL412U, and 55S41U).................52 Tuning to the next programmed channel....................................32 Using the Film Stabilization feature Tuning to a specific channel (For 46SL412U, 55SL412U, and 55S41U).................52 (programmed or unprogrammed)................................32 Using CableClear® digital noise reduction.................................52 Switching between two channels using SurfLock™...................33 Using MPEG noise reduction.....................................................53 Selecting the picture size............................................................33 Using the Game Mode feature....................................................53 Scrolling the TheaterWide® picture Chapter 8: Troubleshooting......................................54 (TheaterWide 2 and 3 only)................................................35 General troubleshooting..............................................................54 Using the auto aspect ratio feature.............................................35 Chapter 9: Appendix...............................................56 Using the FREEZE feature.........................................................35 Specifications..............................................................................56 Adjusting the picture...................................................................35 Acceptable signal formats for PC IN and HDMI terminals.......57 Selecting the picture mode..........................................................35 Limited United States Warranty for LCD Televisions...............58 Adjusting the picture quality......................................................36 Limited Canadian Warranty for Toshiba Brand Flat Panel Using the closed caption mode...................................................36 Televisions...........................................................................59 Base closed captions...................................................................36 Digital CC Settings ....................................................................37 CC Selector.................................................................................37 Adjusting the audio.....................................................................38 Muting the sound........................................................................38 Using the digital audio selector..................................................38 Selecting stereo/SAP broadcasts................................................38 9

Chapter 1: Introduction Features of your new TV The following are just a few of the many exciting features of your new Toshiba widescreen, integrated HD, LCD TV: • Integrated digital tuning (8VSB ATSC and QAM) eliminates the need for a separate digital converter set-top box (in most cases). • 1080p output resolution. • Three HDMI® digital, high-definition multimedia interfaces 1080p input support ( page 17). • One set of ColorStream® HD high-resolution component video inputs ( page 16). • Digital Audio Out optical audio connection with Dolby® Digital optical output format ( page 39). • CableClear® digital picture noise reduction ( page 52). • PC IN (Analog RGB) computer terminal ( pages 19-20). • REGZA-LINK allows control of external devices from the TV remote via HDMI connection( page 48). • ClearFrame™ 120 Hz anti-blur feature (for 46SL412U, 55SL412U, and 55S41U) ( page 52). • Media Player allows you to view photo files and to play music files ( page 44). • ENERGY STAR® qualified 10

Overview of steps for installing, 10 Program channels into the TV’s channel memory ( page 26). setting up, and using your new TV 11 For details on using the TV’s features, see Chapters 6 and 7. Follow these steps to set up your TV and begin using its many exciting features. 12 For help, refer to Chapter 8: Troubleshooting. 13 For technical specifications and warranty 1 Carefully read the important safety, installation, information, see Chapter 9. care, and service information. Keep this manual 14 Enjoy your new TV! for future reference. 2 Observe the following when choosing a location for the TV: •Read “Important notes about your LCD TV” ( page 7). •Place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit. Secure the TV to a wall, pillar, or other immovable structure ( page 4). •Place the TV in a location where light does not reflect on the screen. •Place the TV far enough from walls and other objects to allow proper ventilation. Inadequate ventilation may cause overheating, which will damage the TV. THIS TYPE OF DAMAGE IS NOT COVERED UNDER THE TOSHIBA WARRANTY. 3 Do not plug in any power cords until AFTER you have connected all cables and devices to your TV. 4 BEFORE connecting cables or devices to the TV, learn the functions of the TV’s connections and controls ( pages 12–13). 5 Connect your other electronic device(s) to the TV ( pages 14–20). 6 Install the batteries in the remote control ( page 21). 7 See “Learning about the remote control” ( page 22) for an overview of the buttons on the remote control. 8 AFTER connecting all cables and devices, plug in the power cords for your TV and other devices. Then press POWER on the TV control panel or remote control to turn on the TV. If the TV stops responding to the remote control or TV control panel and you cannot turn the TV off or on, please unplug the power cord a few seconds then plug it back in and try again. 9 See “Menu layout and navigation” for a quick overview of navigating the TV’s menu system ( page 23). 11

Chapter 1: Introduction TV front and side panel controls and connections Models 40SL412U, 46SL412U, 55SL412U, and 55S41U are used in this manual for illustration purposes. Left side panel TV front TV top INPUT MENU CH VOL 3 2 1 1無 Remote sensor — Point the remote control - INPUT (EXIT) — To change the source you are toward this remote sensor ( “Remote control viewing. When a menu is on-screen, the INPUT effective range” on page 21). button on the TV’s control panel functions as 2無 Touch Sensor — Touch Sensor controls are only the EXIT button. available when touched. 3無 Touch Sensor window — Touch Sensor window indicates the function of the touch sensor. This With the exception of the POWER key, the window doesn’t appear until you activate the Touch Sensor window is activated with the first Touch Sensor. touch. Subsequent touches operate the controls as described. - POWER — To turn the TV on and off. - VOL +- — These buttons adjust the volume level. When a menu is on-screen, these buttons function as left/right menu navigation buttons. - CH pq — When no menu is on-screen, these buttons change the channel (programmed channels only;  page 26). When a menu is on-screen, these buttons function as up/down menu navigation buttons. - MENU(OK) — To access the menu system ( pages 23–24). When a menu is on-screen, the MENU button on the TV’s control panel functions as the OK button. 12

Chapter 1: Introduction TV back panel connections For an explanation of cable types and connections, see pages 13–19. 1 2 TV back 2 3 4 8 Power Cord 7 6 5 1無 PC IN — For use when connecting a personal 6無 ANALOG AUDIO OUT — Analog audio outputs computer. for connecting an audio amplifier. ® ® 2無 HDMI IN — High-Definition Multimedia 7無 ColorStream HD/VIDEO — These include Interface input receives digital audio and standard A/V connections. uncompressed digital video from an HDMI Note: Component/Standard(composite) device or uncompressed digital video from a DVI video cables carry only video information; device. HDMI connection is necessary to receive separate audio cables are required for a 1080p signals. complete connection. 3無 PC/HDMI 1 (AUDIO) IN — PC audio input 8無 USB port — To access JPEG or MP3 files. terminal is shared with HDMI 1 analog audio input terminals, and its use can be configured in the Audio Setup menu ( page 44). 4無 ANT/CABLE — Input that supports analog (NTSC) and digital (ATSC) off-air antenna signals and analog and digital Cable TV (QAM) signals. 5無 DIGITAL AUDIO OUT — Optical audio output in Dolby Digital or PCM (Pulse-Code Modulation) format for connecting an external Dolby Digital decoder, amplifier, or home theater system with optical audio input. 13

Chapter 2: Connecting your TV Overview of cable types Optical audio cable Cables can be purchased from most stores that sell audio/ Optical audio cable is for connecting receivers with video devices. Before purchasing any cables, be sure of Dolby Digital or PCM (pulse-code modulation) optical connector types required by your devices and the length audio input to the TV’s DIGITAL AUDIO OUT terminal of each cable. ( page 19). Coaxial (F-type) cable Analog RGB (15-pin) computer cable Coaxial (F-type) cable is used for connecting your antenna, cable TV service, and/or cable converter box Analog RGB (15-pin) computer cable is for connecting to the ANT/CABLE input on your TV. a PC to the TV’s PC IN terminal ( page 20). Standard A/V cables (red/white/yellow) Note: Separate audio cable are required for a complete connection. 3.5mm Stereo to RCA Y-cable Standard A/V cables (composite video) usually come in sets of three, and are for use with video devices with analog audio and composite video output. These cables (and the related inputs on your TV) are typically color- 3.5mm Stereo to RCA Y-Cable is for connecting audio coded according to use: yellow for video, red for stereo signal from DVI device to TV. right audio, and white for stereo left (or mono) audio. Component video cables (red/green/blue) About the connection illustrations You can connect different types and brands of devices to your TV in several different configurations. The connection Component video cables come in sets of three and are illustrations in this manual are representative of typical for use with video devices with component video output. device connections only. The input/output terminals on (ColorStream® is Toshiba’s brand of component video.) your devices may differ from those illustrated herein. For These cables are typically color-coded red, green, and details on connecting and using your specific devices, refer blue. Separate audio cables are required for a complete to each device’s owner’s manual. connection. Note: Component video cables provide better picture performance than a standard (composite) video. HDMI® cable (with HDMI Logo “ ”) HDMI (High-Definition Multimedia Interface) cable is for use with devices with an HDMI output. An HDMI cable delivers digital audio and video in its native format. This cable carries both video and audio information; therefore, separate audio cables are not required for a complete HDMI device connection ( page 17 and page 20). Note: HDMI cable provides better picture performance than a standard (composite) video. 14

Chapter 2: Connecting your TV Connecting a VCR and antenna, Cable TV or Camcorder From Cable TV or From Cable TV Camcorder antenna Cable box AUDIO VIDEO OUT L IN CH 3 R TV back panel CH 4 OUT Stereo VCR VIDEO AUDIO L R IN IN from CH 3 ANT CH 4 OUT OUT to L R TV You will need: To view the VCR: Turn ON the VCR. Select the VIDEO video input • Coaxial cables source on the TV.* • Standard A/V cables −− If you have a mono VCR, connect L/MONO To view the camcorder video: on the TV to your VCR’s audio out terminal Select the VIDEO video input source on the TV.* using the white audio cable only. • Standard audio cables. ** To select the video input source, press on the remote control ( page 22). Note: When you use a Cable box, you may not be able to use the remote control to program or access certain features on the TV. The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, To view the antenna or Cable signal: and other materials is prohibited under the Copyright Select the ANT/CABLE video input source on the TV.* Laws of the United States and other countries, and may subject you to civil and criminal liability. To view basic and premium Cable channels: Turn OFF the VCR. Select the ANT/CABLE video input source on the TV.* Tune the TV to channel 3 or 4 (whichever channel the Cable box output is set to). Use the Cable box controls to change channels. 15

Chapter 2: Connecting your TV Connecting a DVD player with ColorStream® (component video), a VCR, and a satellite receiver From antenna TV back panel Stereo VCR VIDEO AUDIO L R IN IN from ANT CH 3 CH 4 OUT OUT to TV L R From satellite dish AUDIO OUT Y PB PR L Satellite COMPONENT VIDEO S-VIDEO VIDEO R IN OUT OUT Satellite receiver with component video or DVD player with component video You will need: To view antenna or Cable channels: • Coaxial cables Select the ANT/CABLE video input source on the TV.* • Standard A/V cables To view the DVD player: −− If you have a mono VCR, connect L/MONO Turn ON the DVD player. Select the ColorStream HD on the TV to your VCR’s audio out terminal video input source on the TV.* using the white audio cable only. To view satellite programs using the • Standard audio cables component video connections: • Component video cables Turn on the satellite receiver. Select the ColorStream −− You can connect the component video cables (plus audio cables) from the DVD player or HD video input source on the TV.* satellite receiver to the ColorStream terminal To view the VCR or view and record on the TV. The ColorStream HD terminal antenna channels: can be used with Progressive (480p, 720p) Turn ON the VCR. Tune the VCR to the channel you want and Interlaced (480i, 1080i) scan systems. to watch. Select the VIDEO video input source on the TV.* A 1080i signal will provide the best picture To record a TV program while watching a DVD: performance (1080p is not supported). Turn ON the VCR. Tune the VCR to the channel to −− If your DVD player or satellite receiver record. Select the ColorStream HD video input source does not have component video, connect on the TV* to view the DVD. a standard A/V cable to VIDEO terminal. If your DVD player has HDMI video, see page ** To select the video input source, press on the 17. remote control ( page 22). The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. 16

Chapter 2: Connecting your TV To connect a DVI device, you will need: Connecting an HDMI® or DVI • One HDMI-to-DVI adapter cable device to the HDMI input −− For proper operation, the length of an HDMI- to-DVI adapter cable should not exceed 9.8 ft The HDMI input on your TV receives digital audio (3m). The recommended length is 6.6 ft (2m). and uncompressed digital video from an HDMI source device, or uncompressed digital video from a • One 3.5mm stereo to RCA Y-cable DVI (Digital Visual Interface) source device. −− An HDMI-to-DVI adapter cable transfers This input is designed to accept HDCP (High- video only. Separate analog audio cables Bandwidth Digital-Content Protection) program are required (see illustration). material in digital form from EIA/CEA-861-D- −− See “Setting the HDMI ® audio mode” compliant[1] consumer electronic devices (such as ( page 27). a set-top box or DVD player with HDMI or DVI TV back panel output).The HDMI input can accept and display VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz), and 1080p (24Hz/60Hz) signal formats. For detailed signal specifications, see page 57. Supported Audio format: Linear PCM, sampling rate 32/44.1/ 48 kHz Note: To connect a PC to the HDMI input, see page 20. To connect an HDMI device, you will need: • One HDMI cable (type A connector) per HDMI device −− For proper operation, it is recommended that DVI device you use an HDMI cable with the HDMI Logo VIDEO L AUDIO R DVI/HDCP OUT ( ). IN IN −− To display an 1080p/60Hz signal format, you OUT L R will need a Category 2 cable. Conventional HDMI/DVI cable may not work properly. Note: To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these −− HDMI cable transfers both video and audio. Separate analog audio cables are not procedures: required (see illustration). −− See “Setting the HDMI ® audio mode” •• When turning on your electronic components, ( page 27). turn on the TV first, and then the HDMI or DVI device. TV back panel Side panel •• When turning off your electronic components, turn off the HDMI or DVI device first, and then the TV. [1]EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, HDMI device which is being standardized for reception of high-definition video signals. Because this is an evolving technology, it is possible that some 8 devices may not operate properly with the TV. To view the HDMI device video: Select the HDMI 1, HDMI 2 or HDMI 3 video input source on the TV.* ** To select the video input source, press on the remote control ( page 22). 17

Chapter 2: Connecting your TV REGZA-LINK® connection You can control the basic functions of connected audio/video devices using the TV’s remote control if you connect a REGZA-LINK® compatible audio receiver or playback device. For an explanation of setup and operations, see page 48. TV back panel Playback device Audio receiver (REGZA-LINK® DVD player, etc.) Playback device (REGZA-LINK® DVD player, etc.) To connect an Audio Receiver and Playback Before controlling the device(s): Devices, you will need: • After completing the above connections, set the • HDMI cables ( page 14) REGZA-LINK Setup menu as you desire ( page 49). Note: • The connected devices must also be set. For details, see the operation manual for each device. •• If several devices are connected, the REGZA-LINK feature may not operate • The REGZA-LINK® feature uses the CEC properly. technology as regulated by the HDMI standard. •• For proper operation, it is recommended that • This feature is limited to models incorporating you use HDMI cables with the HDMI Logo Toshiba’s REGZA-LINK®. However, Toshiba is not ( ). liable for those operations. Refer to the individual instruction manuals for compatibility information. Note: This feature may not work properly depending on the devices that are connected. 18

Chapter 2: Connecting your TV Note: Connecting a digital audio system •• Some audio systems may not be compatible The TV’s DIGITAL AUDIO OUT terminal outputs a with Dolby Digital bitstream signals. Older audio systems that are not compatible with Dolby® * Digital or 2-channel down-mixed standard optical out signals may not work PCM (Pulse-Code Modulation) signal for use with properly, creating a high noise level that an external Dolby® Digital decoder or other external may damage speakers or headphones. audio system with optical audio input. THIS DAMAGE IS NOT COVERED BY YOUR WARRANTY. You will need: •• The DIGITAL AUDIO OUT terminal may not output some digital audio sources because • Optical audio cable (Use an optical audio cable of copy restrictions. that has the larger “TosLink” connector and not the smaller “mini-optical” connector.) ** Manufactured under license from Dolby Laboratories. Dolby, and the double-D symbol are Dolby Digital decoder or trademarks of Dolby Laboratories. other digital audio system Connecting an audio system This connection allows you to use external speaker with an external analog audio amplifier to adjust the level. TV back panel You will need: •• standard audio cables Analog audio amplifier To control the audio: 1無 Turn on the TV and the digital audio device. LINE IN L R 2無 Press on the TV’s remote control and open the Sound menu. TV back panel 3無 Highlight Audio Setup and press . 4無 In the Optical Output Format field, select either Dolby Digital or PCM, depending on your device (“Selecting the optical audio output format” on page 39). (continued) 19

Chapter 2: Connecting your TV Pin Signal Pin Signal Pin Signal Connecting a personal computer (PC) No. name No. name No. name With either the PC IN or HDMI connection, you can watch 1 R 6 Ground 11 Reserved your computer’s display on the TV and hear the sound 2 G 7 Ground 12 SDA from the TV’s speakers. 3 B 8 Ground 13 H-sync To connect a PC to the PC IN terminal on the TV: 4 Reserved 9 5V 14 V-sync When connecting a PC to the PC IN terminal on the TV, use an analog RGB (15-pin) computer cable and a PC audio cable. 5 Reserved 10 Ground 15 SCL TV back panel To connect a PC to the HDMI terminal on the TV: When connecting a PC with a DVI terminal to the HDMI terminal on the TV, use an HDMI-to-DVI adapter cable and analog audio cables. Such as a Toshiba PC with an HDMI terminal, use an HDMI cable (type A connector). Separate analog audio cables may not be necessary, depending on PC PC audio hardware and setup ( page 17). cable TV back panel Computer PC audio output PC audio Conversion adapter (if necessary) cable • To use a PC, set the monitor output resolution on the Computer PC before connecting it to the TV. The PC IN terminal can accept and display VGA, SVGA, XGA, WXGA and PC audio SXGA signal formats. For detailed signal specifications output ( page 57). • Other formats or non-standard signals will not be displayed correctly. • To display the optimum picture, use the PC setting HDMI-to-DVI feature ( “Using the PC settings feature” on page 43). adapter cable Note: The HDMI input can accept and display VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p •• The PC audio input terminals on the TV are shared (60Hz), 1080i (60Hz), and 1080p (24Hz/60Hz) signal with the HDMI-1 analog audio input terminals ( formats. For detailed signal specifications, see page 57. page 44). Note: •• Some PC models cannot be connected to this TV. •• An adapter is not needed for computers with a •• The edges of the images may be hidden. compatible mini D-sub15-pin terminal. •• If receiving a 480i (HDMI), 480p (HDMI), 720p, 1080i, or 1080p signal program, Native mode •• Depending on the DVD’s title and the specifications of the PC on which you are playing scales the video to display the entire picture within the DVD-Video, some scenes may be skipped or the borders of the screen (i.e. no overscanning). you may not be able to pause during multi-angle scenes. • Signal names for mini D-sub 15-pin connector 20

Chapter 3: Using the remote control 6無 FREEZE freezes the picture. Press again to restore the Learning about the remote control moving picture ( page 35). Only the buttons used for operating the TV are 7無 Channel Numbers (0–9, –/100) directly tune channels. described here. The button is used to tune digital channels ( page 32) or to edit the Favorites List ( page 30). 8無 FAV BROWSER accesses the Favorites List in the Channel Browser™ ( page 30). 9無 RECALL displays TV status information ( page 49). 10無CH pq cycles through programmed channels when no menu is on-screen ( page 26). 11無C.CAPTION accesses the closed caption ( pages 36-37). 12無MUTE reduces or turns off the sound ( page 38). 13無VOL + – adjusts the volume level. 14無INFO displays TV status information as well as program details, when available ( pages 49-50). 15無EXIT closes on-screen menus. 16無ENTER activates highlighted items in the main menu system. 17無CH RTN returns to the last viewed channel or source ( page 32). 18無Arrow buttons (pqtu) When a menu is on-screen, these buttons select or adjust programming menus (Also see t / u ). 19無t / u While watching TV, these buttons open the Channel Browser™ and tune to the previous/next channel in the channel history ( page 30) (Also see “Arrow buttons”). 20無MENU accesses the main TV menu system ( pages 23-24). The following key functions allow you to control Toshiba REGZA-LINK compatible devices via HDMI connection ( Page 48, REGZA-LINK playback device control). Note: The error message “NOT AVAILABLE” 21無STOP Stops the tape or DVD. may appear if you press a key for a function that is not available. 22無PLAY Begins playback of a tape or DVD. 23無SKIP Skips forward to locate later DVD chapters. 1無 POWER turns the TV on and off. When the TV is on, the green LED indicator on the TV front will be 24無FF Fast-forwards the tape or DVD (Press during play illuminated. mode to view the picture moving rapidly forward). 25無EJECT Eject the tape or DVD. 2無 PIC SIZE cycles through the picture sizes: Full, TheaterWide 1/ 2/ 3, 4:3, Native, Normal, and Dot by 26無PAUSE Press during play or record mode to pause the Dot ( pages 33-34). picture; press again to restart. 3無 PIC MODE selects the picture mode ( pages 35-36). 27無SKIP Skips back to beginning of current DVD chapter, or locates previous chapters. 4無 INPUT selects the video input source ( page 29). 28無REW Rewinds/reverses the tape or DVD (Press 5無 SLEEP accesses the sleep timer ( page 47). during play mode to view the picture moving rapidly backward). 22

Chapter 4: Menu layout and navigation Main menu layout The tables below and on the next page provide a quick overview of your TV’s menu system. To open the main menus (illustrated below), press on the remote control or TV control panel. Icon Item Option Picture Mode  Sports / Standard / Movie / PC / Preference Picture Settings  [Opens the Picture Settings menu] Noise Reduction  [Opens the Noise Reduction menu] Game Mode  Off / On Theater Settings  [Opens the Theater Settings menu] Sound Digital Audio Selector  [Launches the temporary Audio Selector] Audio Settings  [Opens the Audio Settings menu] Audio Setup  [Opens the Audio Setup menu] Preferences CC Selector  [Launches the temporary CC Selector] Base CC Mode  Off / CC1 / CC2 / CC3 / CC4 / T1 / T2 / T3 / T4 Digital CC Settings  [Opens the Digital CC Setup menu] Input Labeling  [Opens the Input Labeling menu] Menu Language  English / Français / Español Channel Browser Setup  [Opens the Channel Browser Settings menu] REGZA-LINK Player Control  [Opens the REGZA-LINK Player Control] Energy Saving Settings  [Opens the Energy Saving Settings menu] Locks Enable Rating Blocking  Off / On Edit Rating Limits  [Opens the Edit Rating Limits menu] Input Lock  Off / Video / Video+ Panel Lock  Off / On GameTimer  Off / 30 min / 60 min / 90 min / 120 min New PIN Code  [Opens the New PIN Code entry screen] Setup Installation  [Opens the Installation menu ( page 28)]  Enable REGZA-LINK / TV Auto Input Switch REGZA-LINK Setup / TV Auto Power / Device Auto Standby / Speaker Preference Sleep Timer  [00:00~12:00] PC Settings  [Opens the PC Settings menu] Media Player  [Opens the Media Player menu] 23

Chapter 4: Menu layout and navigation Setup/Installation menu layout The Installation menu contains the Terrestrial and System Status menus. To open the Installation menu (illustrated below), press on the remote control or TV control panel, open the Setup menu, select Installation, and press . Icon Item Option Terrestrial Input Configuration  [Opens the Input Configuration menu] Channel Program  [Start Scan]  [Scans for new channels on ANT/CABLE] Channel Options  [Opens the Skip / Lock Channel menu] Channel Tuning Mode  Standard / Auto / Digital  Eastern / Newfoundland / Atlantic / Hawaii / Alaska / Time Zone Pacific / Mountain / Central Signal Meter  [Opens the Signal Meter menu] System Status System Information  [Opens the System Information screen] Note: Navigating the menu system The menu background may sometimes appear black, depending on the signal the TV is You can use the buttons on the remote control or TV receiving. This is not a sign of malfunction. control panel to access and navigate your TV’s on- screen menu system. • Press to open the menu system. • When a menu is opened, use the up/down/left/ right arrow buttons (pqtu) on the remote control or pq on the TV control panel to move in the corresponding direction in the menu. • Press to save your menu settings or select a highlighted item. (A highlighted menu item appears in a different color in the menu.) • All menus close automatically if you do not make a selection within 60 seconds. However, the signal meter menu will close automatically after about 5 minutes. • To close a menu instantly, press . 24

Chapter 5: Setting up your TV Programming channels into the TV’s channel memory When you press or on the remote control or TV control panel, your TV will stop only on the channels you programmed into the TV’s channel memory. Follow the steps below to program channels into the TV’s channel memory. 4無A new set of Installation menu icons will appear, as shown below. Open the Terrestrial menu, highlight Channel Program to bring up the Start Programming channels automatically Scan, and press again to begin channel Your TV can automatically detect all active channels programming. in your area and store them in its memory. After the channels are programmed automatically, you can manually add or erase individual channels in the channel memory. Note: •• You must configure the ANT/CABLE input source before programming channels ( page 25). •• The automatic channel programming process will erase channels that were previously programmed into the TV’s memory. •• To tune the TV to a channel not programmed in the channel memory, you must use the Channel Number buttons on the remote The TV will automatically cycle through all the control. antenna channels and store all active channels •• Programming channels when the in the channel memory. While the TV is cycling ANT/CABLE input is configured for Cable through the channels the message “Scanning will take substantially longer than when the channels, please wait” appears. antenna input is configured for Antenna. 5無To cancel channel programming, press on This is normal; however, once channel the remote control (or highlight Cancel in the on- programming is finished, you should not have screen display and press ). to repeat the programming process again When channel programming is finished, press unless your Cable TV service lineup changes or to view the programmed channels. significantly. To program channels automatically: Setting channel skip 1無Configure the antenna input source, if you have To prevent certain channels from being viewed, not already done so ( page 25). channel positions can be skipped. 2無Press and open the Setup menu. 1無From the Setup menu, highlight Installation and press . 3無Highlight Installation and press . 2無Press p or q to select Channel Options and press . The list of channels will appear. (continued) 26

Chapter 5: Setting up your TV Setting the HDMI® audio mode To set the HDMI audio mode: 1無Press and open the Sound menu. 2無Highlight Audio Setup and press . 3無Press p or q to select HDMI 1 Audio and 3無Press p or q to select a channel position to be then press t or u to select the HDMI 1 audio skipped and press . A will appear in the mode (Auto, Digital, or Analog). (Auto is the box. To remove the , press again. recommended mode.) See “Connecting an HDMI or DVI device to the HDMI input” ( page 17). To add a channel to the channel memory: Highlight the checked box next to the channel number you want to add, and then press to remove the tick. To block channels in the channel memory: You can block specific channels. You will not be able to tune blocked channels unless you unlock them. ( Page 42 Locking channels) Mode Description To manually add digital subchannels on a When viewing the HDMI 1 input, if physical channel: digital audio from the HDMI input is Use the Channel Numbers and the Dash ( ) on Auto available, it will be output. If not, the the remote control to enter the channel number (for TV will automatically detect and output example, 56–1). analog audio from the PC Audio input. If the channel is found, the number will be added to When viewing the HDMI 1 input, the list and the box will be unchecked. Digital digital audio from the HDMI input will If the channel is not found, a message will appear. be output. Note: Skipped channels cannot be selected with When viewing the HDMI 1 input, or ; however, they can still be accessed Analog analog audio from the PC Audio input using the number keys on the remote control. will be output. 4無To save your settings, highlight Done and press To remove encrypted channels from the . channel memory: Note: Because the PC and HDMI-1 inputs If an encrypted channel is accidentally added to the share the same set of analog audio inputs, the channel list by programming channels, you can remove PC Audio menu setting influences the HDMI 1 the unwanted encrypted (non-viewable) channel while Audio menu setting. If PC Audio is set to “No,” you are channel surfing. When you tune to an encrypted the HDMI 1 Audio setting changes to “Auto.” channel, the following message will appear. If PC Audio is set to “Yes,” the HDMI 1 Audio setting is set to “Digital” and is grayed out in Digital Channel Is Encrypted - Press 1 on remote to remove channel the menu. (Also see item 3 on page 13 and “Setting the PC Audio” on page 44.) Press while the message is on the screen to remove the unnecessary channel from the channel list. 27