broken laptop lcd screen factory

I have this problem also. My Samsung laptop display is damaged so that I can only use it with an external monitor. My laptop"s lcd display does light up but is all gray.

When I try to reset it, after the first reboot, I can see that the laptop has rebooted but my external (HDMI) display does not come up (and my broken laptop display lights up but is just gray).

I give it several hours, but I never get a display (on my exernal display) showing me the next step in the reset. I finally end up just powering the laptop off with the power button. After a few reboots the laptop works again, announcing that the reset failed.

Hi, everyone. My 3 year old Asus laptop had been acting weird for the past few weeks (basic programs like file explorer and task manager didn"t respond, games didn"t load, etc.) so I decided to do a factory reset to it. Before I went to bed two days ago, I backed up my files to OneDrive and chose the delete everything option, the cloud windows download option and the clear drive option. Yesterday I woke up and the reset was still going on, and, 34 hours later, it still is (or so I assume). The problem is that my laptop"s screen is almost completely burnt (I don"t know the technical term), and I can only see a 1cm bar at the top. Because I use a second monitor, I didn"t bother with this, but the progress information on the reset isn"t being shown on the second monitor, thus, I don"t know if it"s just stuck or still going. I assume it"s still going on because I saw online that the resetting page is black, and the little bar is currently black, but it could be something else. Because I"m used to my laptop taking SO LONG to so simple things such as updating or even loading a large folder (hence my resetting it), I didn"t care for how long the reset was taking, but I saw on the internet that the most it"s ever taken people is only 4 hours, so I"m getting worried. My computer is an Asus Vivobook with an Intel i7 8th gen processor, a Nvidia 930 Mx, 1TB storage (SSD) and 4GB of ram. My question is: is there any way I can see the progress of the reset without the laptop monitor? How can I transfer the image to my second monitor? How long should I wait? Any help would be deeply appreciated and I thank you all for the time spent reading this post.

When a laptop screen breaks, you’ll see various visual defects depending on precisely what broke. You may notice stuck, or incorrectly colored pixels, lines of color, bleeding colors, chunks of the screen appear black, or the screen may not turn on at all.

When a laptop screen is physically broken (such as a cracked screen), it’s usually due to physical damage. You may have dropped the laptop or dropped something on it. A laptop screen can even break if there is something as small as a bit of sand between it and the keyboard.

To fix your broken laptop screen, you’ll have to try each of these fixes. If the screen starts working, or you see enough improvement to begin using the laptop again, you can stop. If it stops working again in the future, return to the list and try the rest of the fixes.

If your screen is physically cracked and the underlying panel is damaged, these fixes won"t work. To fix a physically cracked or broken screen, the only option is to replace the screen.

Restart your laptop. The screen not appearing to work may be caused by an operating system issue, or some other conflict will be cleared by simply restarting the computer. Since restarting is so easy, it should be the first thing you try.

Close the laptop and reopen it. Examine your keyboard and screen areas for any debris, and clean them thoroughly. If your laptop uses a visible latch, clean the latch mechanism. Carefully close the laptop, ensure it is completely closed, and open it back up. If the screen sometimes turns on and sometimes doesn’t, you probably have a bad lid sensor.

Plug in an external monitor. If your screen is entirely black, try plugging in an external monitor. If the external monitor doesn’t work, your laptop may not be on, or it may be asleep or in hibernation mode. Plug it in, and make sure it"s on.

Update your video drivers. If your screen isn’t completely black, but you see visual defects on the screen, try updating your video drivers. You may have a malfunctioning or glitchy driver.

Try to fix your burn-in. If it looks more like you have ghosts of old images stuck on your screen, then you can try a white screen saver or a few other potential fixes to remove the burn-in.

Check your screen and backlight connections. If you have experience with disassembling laptops, you can remove the bezel around your screen, hinge covers, or other case components to reveal the screen and backlight wires and connectors. Make sure everything is fully seated and the cables aren’t crimped or broken.

Replace the screen. If nothing else works, then your screen probably has to be replaced. Screens with large black or colored bars, black holes, or colors that seem to run are typically beyond repair. If it"s a cracked screen, that’s also a clue you’ll have to replace it.

Make use of your broken laptop by salvaging the hard drive as an external hard drive and selling any other parts that still work. If the display still works, use it as a standalone monitor. If you decide to sell your laptop, perform a factory reset to wipe your personal files.

Getting your screen professionally repaired will likely cost $200 or more. You may be able to find a screen and replace it yourself for less than $100. Before you spend money on repairs, consider upgrading to a new laptop.

A dying or cracked display doesn’t mean your laptop is a paperweight. For most laptops, a screen replacement takes $80 and an hour of your time at most. If you’re a DIYer, replacing a broken laptop screen yourself is a great way to save cash, as most computer repair shops will quote you $150 to $300 for the job.

Before doing anything, give your laptop a full look-over and inspection to ensure the screen really needs replacement. If the graphics card on the motherboard is dead, for instance, you may be wasting your time and effort on replacing a perfectly good screen. Additionally, if the laptop has been recently dropped or otherwise possibly physically harmed, you’ll want to double-check for other damage as well.

To ensure the graphics card is functioning, you can plug a desktop monitor or TV into the laptop, as most have a standard blue VGA monitor and/or a HDMI output. If the picture looks good on an external display, your graphics card is likely good and the screen is at fault. If you don’t get any picture, keep in mind some laptops require you to press certain function keys on the laptop to activate external display output. If you do that and video still doesn’t display, your graphics card and/or motherboard is likely broken, rather than your screen.

If the laptop outputs to another display successfully, use the computer for a while to ensure the keyboard and other laptop components appear to be functioning normally.

Before you replace your laptop’s LCD, here are the caveats to the general steps that follow. This is not meant to be a guide for ultrabooks, two-in-ones, tablets, Macbooks, or other, more specialized notebooks, however. It’s more for average, run-of-the-mill laptops. But even then the general steps I discuss do not work for all such laptops. Some will require a different process and/or more work to replace the screen, such as accessing the motherboard by opening the main case of the laptop.

Because of that crucial caveat, before buying a new LCD, it may be a good idea to try to remove the damaged screen first, to ensure you can perform the replacement. If, after following the first few steps the process looks different for your laptop, I recommend scouring Google and YouTube or finding a repair professional for further help on your exact laptop brand and model.

Finding a replacement LCD is typically easy—and you don’t have to pay the crazy prices the manufacturer usually wants. Just search eBay, Amazon, or Google with your laptop model number and the words LCD screen. You’ll find most regular screens can be had for as low as $50 to $80. If you aren’t finding anything, try other identification numbers from the laptop label or documentation. Some vendors have one or two different sets of identification numbers that could serve as your model number.

When shopping for the LCD, most sellers will alert you to compare the specs and placement of the video cable on the back of their screen to your current screen. This is another reason to crack open the laptop bezel before ordering a replacement. However from my own experience, if the seller says the screen is compatible with your exact laptop model, it usually works.

Table or other flat working area: You’ll need a spot to sit (or stand, if that’s your thing) with a flat area to work on your laptop. This gives you a reason to clean off that messy dining-room table or desk.

Plastic putty knife or other thin object: This is optional, to aid in prying apart the screen bezel from the case. Personally, my finger nails usually do the trick. If you do use another object, ensure it’s thin enough but not so sharp that it will leave scrapes or other evidence of prying.

Find the round cover stickers that are hiding the screws on the screen bezel, the case surrounding the screen. These stickers are usually on the bottom of the bezel, near the screen hinges, when you have the screen opened. You should find one on each side of the screen.

Use your screwdriver to remove the now-exposed screws. Remember: righty-tighty, lefty-loosey. Some screws are easy to remove; others, not so much. But moving the screen into just the right position usually exposes the screws enough for removal.

Carefully start prying the screen bezel away from the back side of the screen case. Work a fingernail or other thin, prying object into the crack around the outside of the screen. The bezel is usually secured to the back case with plastic snaps, so give it some force while prying—but not too brutish. You’ll hear the unsnapping of the fasteners when prying.

Once you’ve unsnapped the screen bezel, it may or may not be easy to remove. If not, it’s likely stuck around the screen hinges. Moving the screen position up or down, with some gentle force if necessary, should free it fully.

Once the bezel is fully removed, you’ll find the LCD secured to a metal trim frame on the left and right sides. Remove the two screws (one on each side, on the top) holding the trim frame pieces to the back screen case. Now, you should be able to lift the LCD (with the trim frame pieces attached) slightly away from the back screen case.

On each of the trim frames’ sides, remove any screws that are securing it to the LCD. Most laptops have three screws on each side; however, the smaller laptop I photographed here doesn’t have these screws—the LCD is actually secured to the trim frame pieces by tape on each side.

Now you should be able to set the LCD face-down onto the keyboard. Be careful not to put excessive force on the video cable attached to the back of the LCD.

Disconnect the video cable from the back of the LCD. Though the laptop I photographed here has the connector on the very bottom, most laptops have the connector near the center. If so, keep in mind that the portion of the cable running down the screen is usually stuck on the back of the screen with some mild adhesive. Just gently pull the cables away from the screen. You usually must remove tape that’s securing the video connector to the back of the screen as well. When you get to the point of actually pulling the video cable out of the screen connector, it should unplug with little force.

Once you’ve fully removed the broken LCD, simply place the new one face-down like you did the old one. Reattach the video cable to the connector and place the cables and any tape just like they were for the old one.

Set the new screen up in the side trim frame pieces, then re-secure it like the old one was: usually three screws in each side of the trim frame pieces, and then a screw on top of each to secure it to the back screen case.

When you get to the point of putting the bezel back on, just line it up and push/squeeze the bezel back into the snaps of the rear screen case. Before replacing the bezel screws, ensure the bezel is fully snapped in place and no crack exists around the edges of the screen case. Lastly, use that safely pin or needle to reattach the sticky screw covers.

Accidental Damage is any damage due to an unintentional act that is not the direct result of a manufacturing defect or failure. Accidental damage is not covered under the standard warranty of the product. Such damage is often the result of a drop or an impact on the LCD screen or any other part of the product which may render the device non-functional. Such types of damage are only covered under an Accidental Damage service offering which is an optional add-on to the basic warranty of the product. Accidental Damage must not be confused with an occasional dead or stuck pixel on the LCD panel. For more information about dead or stuck pixels, see the Dell Display Pixel Guidelines.

The LCD glass on the display is manufactured to rigorous specifications and standards and will not typically crack or break on its own under normal use. In general, cracked, or broken glass is considered accidental damage and is not covered under the standard warranty.

Internal cracks typically occur due to excessive force on the screen. This can be the result of some object hitting the screen, a drop, attempting to close the lid while an object is on the keypad area, or even holding the laptop by its screen.

Spots typically occur due to an external force hitting the screen causing damage to the LCD panel"s backlight assembly. While the top layer did not crack or break, the underlying area was compressed and damaged causing this effect.

If your Dell laptop LCD panel has any accidental damage but the laptop is not covered by the Accidental Damage service offering, contact Dell Technical Support for repair options.

Laptop users can strive to make the most of their laptops to maximize stability, longevity, and usability. Understanding and implementing a few best practices for the safe handling of their laptop will enable them to enjoy their laptop for many years to come. For more information, see the Dell knowledge base article Dell Laptop Best Practices for Care, Use, and Handling.

Just like televisions, laptop displays start to flicker too after a few years. You may sometimes also notice the display turning blank even when the laptop is on. Alternatively, you might find some white lines running down the display.

This doesn’t necessarily mean that there is an issue with the motherboard. If your laptop keeps turning off every few minutes and doesn’t turn on, there is a high chance that the AC adapter has malfunctioned. You can get help from a professional to confirm and get the AC adapter replaced, if required. There is also a possibility that the DC power jack may have broken. A DC connector (or DC plug) is an electrical connector that supplies steady power to the device.

If the DC jack has broken, you can try adjusting the plug’s angle in its jack. If you see some lights turning on but the device is still not booting, it’s time to replace the DC jack. If that doesn’t help, it’s a clear indication of a motherboard-related issue. You can either get the motherboard repaired or replaced by the brand service center. Getting the motherboard repaired could cost you anywhere up to Rs 10,000, whereas the cost of replacing the motherboard can go anywhere up to Rs 25,000.

If you ever notice multi-coloured or single-coloured vertical lines on your laptop screen, it may be a result of a hardware failure or due to damage to the screen. To try fixing it yourself, first unplug your laptop, hold the power button for 30 seconds and restart the laptop. If you continue to see coloured lines, the issue is probably with the LCD screen, which will need to be replaced from the brand’s service center. To be sure about the LCD screen problem, try connecting your laptop to another monitor and see if the issue persists. If it does, the issue is certainly in the LCD panel.

On turning on the laptop when you see the lights blinking and hear the fan working but if the laptop screen is blank and doesn’t display anything, this is again an indication of a faulty motherboard. The first thing to do is to transfer all the data to another drive to make sure your data is safe. Before going ahead and getting the motherboard repaired or replaced, you could try performing a hard reset (also known as a factory reset), which can mostly help in resolving the blank display issue.

Firstly, check if your laptop’s brightness level is set to maximum. If the display is still dim, try restarting the device. This could just be a system error that can be resolved by restarting the device. Also, check if the AC adapter cord is loose and firmly connect it to the outlet and laptop. If the issue still persists, it is mostly due to a failure of the LCD. Behind the LCD, there is an inverter board and backlight bulb which control the picture.

The inverter board converts the low voltage your laptop uses, into higher voltage required by the long bulb that lights up the LCD screen. If the inverter board or bulb fail, you will experience the problem of a dimmed display. Even if one of these two components fail, the screen will need to be replaced, unless the service center can help by just replacing the bulb. We wouldn’t recommend you try resolving it yourself, as this is more complex and you could end up damaging the circuit board and the backlight lamp. So, it’s best to leave this job to an expert.

Laptops are fragile and can easily break, especially with more and more thinner and lighter models being launched now. Some of the most common ways how a laptop is damaged include: when it accidentally falls and the screen cracks, when it’s held at an awkward angle or if you unknowingly placed something heavy on the laptop. Remember, a cracked laptop screen can affect the overall functioning of the device in some cases.

Since brands do not cover the laptop screen, it’s best to get your device covered with a protection plan in advance. Screen replacements are expensive and can cost you anywhere up to Rs. 15,000 but if you have the

Need an expert to take a look at your laptop? Book Onsitego’s on-demand repair service. Besides taking care of common laptop problems like battery draining or laptop hanging, we can help with issues like setting up the operating system or removing malware/virus from your device. Our service engineers are qualified and use only good-quality spare parts while repairing. The best part is that our service is backed with a 90-day post-service warranty.

HDMI capability is essential for me to get the best quality out of a raspberry pi. The high cost you mentioned is much less than the cost of a larger screen for the portable breadboard capable raspberry pi laptop/breadboard lab I"ve been planning. Thank you for your post. BTW , I dont usually use Ali Express so the link you provided are very useful.0

I order the LCVD chord whatever to use my mondor for by gateway laptop the LCD V chord day they sent me is huge I"m gonna try counting the pins inside it of each one Could you help me and what do I need to do

Can you use the monitor controller card from the laptop I got the screen out if? I am just learning electronics so I am just experimenting with different ideas. Thank you for a great instructable.

I"ve seen this project a while ago and now that i found an unused laptop screen I got more into it, so I wanted to know if any of the controller boards that you shared would work with any screen model, or do i have to search for a compatible one?

Most Laptop Screen Repairs only take 20-30 Min, we only use high quality parts, and we offer a 1-Year Warranty. Depending on your model, sometimes we need to order your LCD direct and that may take 3-4 days to receive.

Aftermarket Laptop replacement LCD: Perfect for a cheap quick fix and usually very similar to the original screen you had installed from factory. This is perfect if you want to save money and get back on the road.

Original Manufacturer Screen: Same colors as original, original thickness in glass, smoother touch, better graphics, and is an EXACT replacement for the original screen. In some laptops, this is the only available replacement laptop screen. This screen is great for keeping the same feel as the original screen.

You can either leave your laptop with us and pay only after you pick up. If you leave your laptop for a screen repair, we will immediately order the replacement part after giving you a quote and get it repaired as soon as the part is in our hands. You can also choose to hold onto your laptop while the part is shipped, but we do ask that you pay for the repair ahead of time so we can securely order your replacement laptop screen.

We are experts in providing replacements for damaged laptop, tablet, portable and industrial LCD screens. We provide best quality, brand new A+++ replacement LCD for all major Laptop Brands.

If your Laptop LCD screen is broken, damaged or cracked during use or has dead pixels / lines or the picture sharpness is reduced and backlight is not working, don’t panic. We can provide you excellent quality replacement LCD screen at very reasonable prices.

We take pride in our quality and price. You need not buy a new laptop if your LCD screen is damaged as you can easily replace it yourself with these simple DIY steps.

To ensure that you purchase the right screen for your needs we are happy to assist you in identifying exactly the right he correct screen for your Notebook LCD Screen, tablet, portable computer, etc. You can contact us anytime between 10AM EST to 8PM EST on Monday thru Friday either through the chat function at the bottom right of the screen, or by calling us at (201) 442-0091.