lcd display vs oled display price

OLED displays have higher contrast ratios (1 million : 1 static compared with 1,000 : 1 for LCD screens), deeper blacks and lower power consumption compared with LCD displays. They also have greater color accuracy. However, they are more expensive, and blue OLEDs have a shorter lifetime.

OLED displays offer a much better viewing angle. In contrast, viewing angle is limited with LCD displays. And even inside the supported viewing angle, the quality of the picture on an LCD screen is not consistent; it varies in brightness, contrast, saturation and hue by variations in posture of the viewer.

There are no geographical constraints with OLED screens. LCD screens, on the other hand, lose contrast in high temperature environments, and lose brightness and speed in low temperature environments.

Blue OLEDs degrade more rapidly than the materials that produce other colors. Because of this, the manufacturers of these displays often compensate by calibrating the colors in a way that oversaturates the them and adds a bluish tint to the screen.

With current technology, OLED displays use more energy than backlit LCDs when displaying light colors. While OLED displays have deeper blacks compared with backlit LCD displays, they have dimmer whites.

LCDs use liquid crystals that twist and untwist in response to an electric charge and are lit by a backlight. When a current runs through them, they untwist to let through a specific amount of light. They are then paired with color filters to create the display.

AMOLED (Active-Matrix Organic Light-Emitting Diode) is a different form of OLED used in some mobile phones, media players and digital cameras. It offers higher refresh rates with OLEDs and consume a lot less power, making them good for portable electronics. However, they are difficult to view in direct sunlight. Products with AMOLED screens include Galaxy Nexus, Galaxy S II, HTC Legend and PlayStation Vita.

There are plenty of new and confusing terms facing TV shoppers today, but when it comes down to the screen technology itself, there are only two: Nearly every TV sold today is either LCD or OLED.

The biggest between the two is in how they work. With OLED, each pixel provides its own illumination so there"s no separate backlight. With an LCD TV, all of the pixels are illuminated by an LED backlight. That difference leads to all kinds of picture quality effects, some of which favor LCD, but most of which benefit OLED.

LCDs are made by a number of companies across Asia. All current OLED TVs are built by LG Display, though companies like Sony and Vizio buy OLED panels from LG and then use their own electronics and aesthetic design.

So which one is better? Read on for their strengths and weaknesses. In general we"ll be comparing OLED to the best (read: most expensive) LCD has to offer, mainly because there"s no such thing as a cheap OLED TV (yet).

At the other side of light output is black level, or how dark the TV can get. OLED wins here because of its ability to turn off individual pixels completely. It can produce truly perfect black.

The better LCDs have local dimming, where parts of the screen can dim independently of others. This isn"t quite as good as per-pixel control because the black areas still aren"t absolutely black, but it"s better than nothing. The best LCDs have full-array local dimming, which provides even finer control over the contrast of what"s onscreen -- but even they can suffer from "blooming," where a bright area spoils the black of an adjacent dark area.

Here"s where it comes together. Contrast ratio is the difference between the brightest and the darkest a TV can be. OLED is the winner here because it can get extremely bright, plus it can produce absolute black with no blooming. It has the best contrast ratio of any modern display.

Contrast ratio is the most important aspect of picture quality. A high contrast-ratio display will look more realistic than one with a lower contrast ratio.

One of the main downsides of LCD TVs is a change in picture quality if you sit away from dead center (as in, off to the sides). How much this matters to you certainly depends on your seating arrangement, but also on how much you love your loved ones.

A few LCDs use in-plane switching (IPS) panels, which have better off-axis picture quality than other kinds of LCDs, but don"t look as good as other LCDs straight on (primarily due to a lower contrast ratio).

OLED doesn"t have the off-axis issue LCDs have; its image looks basically the same, even from extreme angles. So if you have a wide seating area, OLED is the better option.

Nearly all current TVs are HDR compatible, but that"s not the entire story. Just because a TV claims HDR compatibility doesn"t mean it can accurately display HDR content. All OLED TVs have the dynamic range to take advantage of HDR, but lower-priced LCDs, especially those without local-dimming backlights, do not. So if you want to see HDR content it all its dynamic, vibrant beauty, go for OLED or an LCD with local dimming.

In our tests comparing the best new OLED and LCD TVs with HDR games and movies, OLED usually looks better. Its superior contrast and lack of blooming win the day despite LCD"s brightness advantage. In other words LCD TVs can get brighter, especially in full-screen bright scenes and HDR highlights, but none of them can control that illumination as precisely as an OLED TV.

OLED"s energy consumption is directly related to screen brightness. The brighter the screen, the more power it draws. It even varies with content. A dark movie will require less power than a hockey game or ski competition.

The energy consumption of LCD varies depending on the backlight setting. The lower the backlight, the lower the power consumption. A basic LED LCD with its backlight set low will draw less power than OLED.

LG has said their OLED TVs have a lifespan of 100,000 hours to half brightness, a figure that"s similar to LED LCDs. Generally speaking, all modern TVs are quite reliable.

Does that mean your new LCD or OLED will last for several decades like your parent"s last CRT (like the one pictured). Probably not, but then, why would you want it to? A 42-inch flat panel cost $14,000 in the late 90"s, and now a 65-inch TV with more than 16x the resolution and a million times better contrast ratio costs $1,400. Which is to say, by the time you"ll want/need to replace it, there will be something even better than what"s available now, for less money.

OLED TVs are available in sizes from 48 to 88 inches, but LCD TVs come in smaller and larger sizes than that -- with many more choices in between -- so LCD wins. At the high end of the size scale, however, the biggest "TVs" don"t use either technology.

If you want something even brighter, and don"t mind spending a literal fortune to get it, Samsung, Sony, and LG all sell direct-view LED displays. In most cases these are

You can get 4K resolution, 50-inch LCDs for around $400 -- or half that on sale. It"s going to be a long time before OLEDs are that price, but they have come down considerably.

LCD dominates the market because it"s cheap to manufacture and delivers good enough picture quality for just about everybody. But according to reviews at CNET and elsewhere, OLED wins for overall picture quality, largely due to the incredible contrast ratio. The price difference isn"t as severe as it used to be, and in the mid- to high-end of the market, there are lots of options.

Chances are, the screen that you"re reading this article on is either an LED, OLED, or an LCD display. These are just three of the many display types out there in the wild. On the surface, they all seem the same. But deep down, they couldn"t be more different.

So, when it comes to OLED vs. LCD—or OLED vs. LED—what are the differences? Here"s a look at these three display technologies, what makes them different, and which one is the best.

LCD stands for "liquid crystal display". The early roots of LCD displays stretch back to 1888 when German scientist, Friedrich Reinitzer, discovered an odd substance. It was a liquid that had the molecular structure of a solid. It was later named "liquid crystal."  After decades of study, someone eventually saw the potential for this strange substance to be used for displays.

The first LCD displays to be used on consumer devices were on digital clocks back in 1968. The technology developed over the following years, being put into numerous other devices.

LCD display panels are divided into layers. The backmost layer is a light source. This is a translucent sheet that disperses light from bulbs at the bottom of the display.

After the filter, the light gets its color by passing through the red, blue, and green filters of the sub-pixels. From there, the light exits the display and creates the image that the viewer sees.

OLED stands for "organic light emitting diode." During the 1970s, scientists were experimented with organic materials that can emit light. In 1987, scientists at Eastman Kodak developed an OLED display that consumed a low amount of energy. And in 2007, Sony unveiled the world"s first OLED television: the Sony XEL-1.

On the other side of the OLED, the electrons flow from the cathode. The electrons then flow to the emissive layer, where they meet the holes. Since the electrons are sent through a voltage, they are "excited", meaning that they have an excess of energy.

When they meet the electron holes, they have to lose that excess energy in order to relax to the ground state for that atom. They release that energy in the form of photos (light particles). From there, the light travels through the red, blue, and green sub-pixels, just like with an LCD display.

LED displays are virtually indistinguishable from LCD displays. The only difference is in how the two types of displays get their light. Instead of using a translucent sheet, LED displays use individually LEDs. There are three primary arrangements of LEDs in the displays.

Full array LED displays have the LEDs arranged evenly throughout the display. This is the preferred arrangement on higher-end TVs. There are a lot of LEDs behind the panel, which means that local dimming is possible.

The direct-lit arrangement can appear to be similar to full array, but there are some differences. With the direct-lit arrangement, the LEDs are also dispersed evenly throughout the panel, but there are far less of them. Because of this, direct-lit displays can not do local dimming. This arrangement is present on lower-end devices.

A display is usually judged by its ability to create vibrant colors. This is an area where OLEDs come out on top. Compared to OLED displays, LCD displays often appear washed out and not as saturated. This is why OLED displays are becoming more popular in the smartphone market.

OLED displays can also produce images with higher contrast than the other two technologies. Since all of the OLEDs on the panel can be turned on and off individually, darker areas of the display can go as dark as they need to.

Full array LED displays come in right behind OLED displays because, like in the case of OLED displays, the LEDs in an LED display can be controlled individually. Full array LED displays use a method called "local dimming", a technique of shutting off LEDs completely in areas that are darker.

LCD displays come in last place because in order for any pixels to be visible, the entire back panel has to be lit. This means that completely black areas are impossible to achieve.

In terms of price, LCD displays are typically cheaper. High definition LCD displays can run you no more than a few hundred dollars. Since LED displays offer better contrast over LCD, you can expect there to be an added price premium.

When it comes to power consumption, OLED scores a win. Since the OLEDs are powered individually, the display only gives power to the ones that need it. Pixels can be turn off completely when there are blacks in the picture.

Full array LED displays come in second place because of the local dimming functionality. Certain LEDs can be completely turned off when the scene calls for blacks. Even though they have this feature, more energy is consumed per LED because the light has to pass through all of the layers of the LCD before reaching the viewers" eyes.

LCDs are the least power efficient. Regardless of the presence of blacks in the scene, the entire panel needs to be lit. This means that the light source is shining at 100% the entire time.

Each display technology has its benefits and its drawbacks. LCD displays are for people who want to save more money, while LED displays are for people who would like to spend more for a bit more contrast in their picture. You"ll spend more on the TV, but it will have a less significant impact on your electricity bill.

OLED displays are for those who want the best of all worlds. They produce the best contrast with the most vivid colors. You will be paying the most for the actual device, but the more power efficient display technology will help even out some of that cost.

For all the new technologies that have come our way in recent times, it’s worth taking a minute to consider an old battle going on between two display types. Two display types that can be found across monitors, TVs, mobile phones, cameras and pretty much any other device that has a screen.

In one corner is LED (light-emitting diode). It’s the most common type of display on the market, however, it might be unfamiliar because there’s slight labelling confusion with LCD (liquid crystal display).

For display purposes the two are the same, and if you see a TV or smartphone that states it has an ‘LED’ screen, it’s an LCD. The LED part just refers to the lighting source, not the display itself.

In a nutshell, LED LCD screens use a backlight to illuminate their pixels, while OLED’s pixels produce their own light. You might hear OLED’s pixels called ‘self-emissive’, while LCD tech is ‘transmissive’.

The light of an OLED display can be controlled on a pixel-by-pixel basis. This sort of dexterity isn’t possible with an LED LCD – but there are drawbacks to this approach, which we’ll come to later.

In cheaper TVs and LCD-screen phones, LED LCD displays tend to use ‘edge lighting’, where LEDs sit to the side of the display, not behind it. The light from these LEDs is fired through a matrix that feeds it through the red, green and blue pixels and into our eyes.

LED LCD screens can go brighter than OLED. That’s a big deal in the TV world, but even more so for smartphones, which are often used outdoors and in bright sunlight.

Brightness is generally measured as ‘nits’ – roughly the light of a candle per square metre. Brightness is important when viewing content in ambient light or sunlight, but also for high dynamic range video. This applies more to TVs, but phones boast credible video performance, and so it matters in that market too. The higher the level of brightness, the greater the visual impact.

Take an LCD screen into a darkened room and you may notice that parts of a purely black image aren’t black, because you can still see the backlighting (or edge lighting) showing through.

Being able to see unwanted backlighting affects a display’s contrast, which is the difference between its brightest highlights and its darkest shadows.

You’ll often see a contrast ratio quoted in a product’s specification, particularly when it comes to TVs and monitors. This tells you how much brighter a display’s whites are compared to its blacks. A decent LCD screen might have a contrast ratio of 1,000:1, which means the whites are a thousand times brighter than the blacks.

Contrast on an OLED display is far higher. When an OLED screen goes black, its pixels produce no light whatsoever. That means an infinite contrast ratio, although how great it looks will depend on how bright the screen can go. In general, OLED screens are best suited for use in darker rooms, and this is certainly the case where TVs are concerned.

OLED panels enjoy excellent viewing angles, primarily because the technology is so thin, and the pixels are so close to the surface. You can walk around an OLED TV or spread out in different spots in your living room, and you won’t lose out on contrast. For phones, viewing angles are extra important because you don’t tend to hold your hand perfectly parallel to your face.

Viewing angles are generally worse in LCDs, but this varies hugely depending on the display technology used. And there are lots of different kinds of LCD panel.

Thankfully, a lot of LCD devices use IPS panels these days. This stands for ‘in-plane switching’ and it generally provides better colour performance and dramatically improved viewing angles.

IPS is used in most smartphones and tablets, plenty of computer monitors and lots of TVs. It’s important to note that IPS and LED LCD aren’t mutually exclusive; it’s just another bit of jargon to tack on. Beware of the marketing blurb and head straight to the spec sheet.

The latest LCD screens can produce fantastic natural-looking colours. However, as is the case with viewing angles, it depends on the specific technology used.

OLED’s colours have fewer issues with pop and vibrancy, but early OLED TVs and phones had problems reining in colours and keeping them realistic. These days, the situation is better, Panasonic’s flagship OLEDs are used in the grading of Hollywood films.

Where OLED struggles is in colour volume. That is, bright scenes may challenge an OLED panel’s ability to maintain levels of colour saturation. It’s a weakness that LCD-favouring manufacturers enjoy pointing out.

Both have been the subject of further advancements in recent years. For LCD there’s Quantum Dot and Mini LED. The former uses a quantum-dot screen with blue LEDs rather than white LEDs and ‘nanocrystals’ of various sizes to convert light into different colours by altering its wavelength. Several TV manufacturers have jumped onboard Quantum Dot technology, but the most popular has been Samsung’s QLED branded TVs.

Mini LED is another derivation of LED LCD panels, employing smaller-sized LEDs that can emit more light than standard versions, increasing brightness output of the TV. And as they are smaller, more can be fitted into a screen, leading to greater control over brightness and contrast. This type of TV is becoming more popular, though in the UK and Europe it’s still relatively expensive. You can read more about Mini LED and its advantages in our explainer.

OLED, meanwhile, hasn’t stood still either. LG is the biggest manufacturer of large-sized OLED panels and has produced panels branded as evo OLED that are brighter than older versions. It uses a different material for its blue OLED material layer within the panel (deuterium), which can last for longer and can have more electrical current passed through it, increasing the brightness of the screen, and elevating the colour volume (range of colours it can display).

Another development is the eagerly anticipated QD-OLED. This display technology merges Quantum Dot backlights with an OLED panel, increasing the brightness, colour accuracy and volume, while retaining OLED’s perfect blacks, infinite contrast and potentially even wider viewing angles, so viewers can spread out anywhere in a room and see pretty much the same image. Samsung and Sonyare the two companies launching QD-OLED TVs in 2022.

And for smartphones there’s been a move towards AMOLED (Active-Matrix Organic Light Emitting Diode) screens for Android screens, while Apple has moved towards OLED for its smartphones and tried Mini LED with its iPad Pro. Technologies are consistently evolving with Superand Dynamic AMOLED versions available, more performance is being eked out.

While LED LCD has been around for much longer and is cheaper to make, manufacturers are beginning to move away from it, at least in the sense of the ‘standard’ LCD LED displays, opting to explore the likes of Mini LED and Quantum Dot variations.

OLED has gained momentum and become cheaper, with prices dipping well below the £1000 price point. OLED is much better than LED LCD at handling darkness and lighting precision, and offers much wider viewing angles, which is great for when large groups of people are watching TV. Refresh rates and motion processing are also better with OLED though there is the spectre of image retention.

If you’re dealing with a limited budget, whether you’re buying a phone, a monitor, a laptop or a TV, you’ll almost certainly end up with an LCD-based screen. OLED, meanwhile, incurs more of a premium but is getting cheaper, appearing in handheld gaming devices, laptops, some of the best smartphones as well as TVs

Which is better? Even if you eliminate money from the equation, it really comes down to personal taste. Neither OLED nor LCD LED is perfect. Some extol OLED’s skill in handling darkness, and its lighting precision. Others prefer LCD’s ability to go brighter and maintain colours at bright levels.

How do you decide? Stop reading this and go to a shop to check it out for yourself. While a shop floor isn’t the best environment in which to evaluate ultimate picture quality, it will at least provide an opportunity for you to realise your priorities. Whether you choose to side with LCD or OLED, you can take comfort in the fact that both technologies have matured considerably, making this is a safe time to invest.

If you’re designing a display application or deciding what type of TV to get, you’ll probably have to choose between an OLED or LCD as your display type.

Not sure which one will be best for you? Don’t worry! We’re here to help you figure out the right display for your project or application. In this post we’ll break down the pros and cons of these display types so you can decide which one is right for you.

LCDs utilize liquid crystals that produce an image when light is passed through the display. OLED displays generate images by applying electricity to organic materials inside the display.OLED and LCD Main Difference:

These different technological approaches to display technology have big impact in some features including contrast, brightness, viewing angles, lifespan, black levels, image burn-in, and price.

Everything from the environment your display will be used in, your budget, to the lighting conditions and the required durability will play a part in this decision.

Contrast refers to the difference between the lightest and darkest parts of an image. High contrast will produce sharper images and more easily readable text. It’s a crucial quality for high fidelity graphics and images or to make sure that a message on a display is very visible.

graphics and images visible. This is the reason you’re still able to see light coming through on images that are meant to be dark on an LCD monitor, display, or television.

OLEDs by comparison, deliver a drastically higher contrast by dynamically managing their individual pixels. When an image on an OLED display uses the color black, the pixel shuts off completely and renders a much higher contrast than that of LCDs.OLED vs LCD - Who is better at contrast?

Having a high brightness level is important if your display is going to be used in direct sunlight or somewhere with high ambient brightness. The display"s brightness level isn"t as important if it’s going to be used indoors or in a low light setting.OLED vs LCD - Who is better at Brightness?

This means the display is much thinner than LCD displays and their pixels are much closer to the surface of the display, giving them an inherently wider viewing angle.

You’ll often notice images becoming distorted or losing their colors when tilting an LCD or when you view it from different angles. However, many LCDs now include technology to compensate for this – specifically In-Plane Switching (IPS).

LCDs with IPS are significantly brighter than standard LCDs and offer viewing angles that are on-par with OLEDs.OLED vs LCD - Who is better at Viewing Angles?

LCDs have been on the market much longer than OLEDs, so there is more data to support their longevity. On average LCDs have proven to perform for around 60,000 hours (2,500) days of operation.

With most LCDs you can expect about 7 years of consistent performance. Some dimming of the backlight has been observed but it is not significant to the quality of the display.

OLEDs are a newer technology in the display market, which makes them harder to fully review. Not only does OLED technology continue to improve at a rapid pace, but there also hasn’t been enough time to thoroughly observe their performance.

You must also consider OLED’s vulnerability to image burn-in. The organic material in these displays can leave a permanent afterimage on the display if a static image is displayed for too long.

So depending on how your OLED is used, this can greatly affect its lifespan. An OLED being used to show static images for long periods of time will not have the same longevity as one displaying dynamic, constantly moving images.OLED vs LCD - Which one last longer?

There is not yet a clear winner when it comes to lifespans between LCD and OLED displays. Each have their advantages depending on their use-cases. It’s a tie!

For a display application requiring the best colors, contrast, and viewing angles – especially for small and lightweight wearable devices – we would suggest an OLED display.

OLED vs. IPS LCD is a topic that comes up whenever consumers upgrade to a newer TV or a smartphone. Should you buy a TV that uses an IPS LCD display or should you pick up a TV with an OLED screen? Well, the answer isn’t so straightforward because they both have their advantages and disadvantages. In this article, we will explain how these screen technologies work and which one you should opt for while buying a TV.

IPS LCD (In-Plane Switching Liquid Crystal Display) and OLED (Organic Light-Emitting Diode) are the two most commonly used screen technologies. Older technologies, such as TN (Twisted Nematic) and PLS (Plane-to-Line Switching) displays, have almost disappeared (except in the world of PC monitors and budget laptops) because IPS LCD and OLED are clearly better in almost all aspects. Other technologies such as Mini-LED, MicroLED, and QNED technologies are extremely new and they won’t become mainstream for a few years.

So, when you are finally deciding which TV to buy, the real battle is between OLED and IPS LCD. So where do these stand? Which is better for you? Which one should you pick for your new home theatre? Read on for more information on the OLED vs IPS LCD battle.

IPS LCD displays are perhaps the most common display type days, especially in TVs and laptops. Laptops, entry-level and mid-range smartphones, and most TVs use LCD displays. So, how do IPS displays work? IPS displays use an array of LCD pixels that shift colour as required. However, they don’t emit light on their own. That’s the reason they need a backlight made up of LEDs (Light-Emitting Diodes). The backlight can be arranged in various layouts: towards the edges, spread across the whole display, or separated into different sections.

IPS screens display the black colour by changing the alignment of LCDs so that pixels block the transmission of light, but some light still gets through. That’s the reason IPS LCD displays can’t display true deep black colour. Instead, they display dark grey and there is some ‘backlight bleed’.

To reduce the backlight bleed, a feature called Local Dimming is used. The feature requires the backlight to be compartmentalized into different matrices, and only those sections are turned on which need to display non-black colours. Other sections of the backlight are turned off, offering true blacks. However, active zones still display some backlight bleed.

OLED displays have traditionally been restricted to high-end devices. Even today, only high-end TVs and laptops feature OLED displays. In the world of smartphones, though, OLED technology has been democratised and even mid-range smartphones these days use OLED displays with high brightness and high refresh rates.

In a nutshell, OLED displays don’t use separate backlight sources. Instead, every pixel can reproduce its own light (also known as self-emissive displays). So, there’s no need for an additional backlight and each pixel can be turned on or off as needed. Since there is no need for a separate backlight plane, OLED displays are much thinner than LCD displays. They also offer a much better contrast ratio and viewing angles. However, the organic material used in OLED pixels tends to “burn” over the years that results in ghosting. Moreover, they can’t be as bright as LCD, Mini-LED, or Micro-LED displays.

We have given you a brief overview of IPS and OLED technologies. But which one is better? And which of these will be right for you? Here’s a list of pros and cons to help you in your purchase decision, where it is for smartphones or TVs.

OLEDs have a quicker response time: OLEDs individually-lit pixels can switch on/off or change colour faster. This makes for lower ghosting during fast-and-frenetic action scenes or while playing games. Ghosting refers to when the image on the screen seems to be following itself around or is blurry at the edges.

OLED TVs are slimmer and flexible: As we mentioned earlier, OLED displays don’t need a bulky backlight plane, so OLED TVs are really slim. The next wave of display technologies – foldable and rollable displays – will also be powered by OLED.

IPS LCD TVs offer higher brightness: IPS LCD TVs use a powerful backlight which also lets them get much brighter than their OLED counterparts. This can make for better HDR and even offer a better viewing experience if your TV room gets a lot of sunlight.

IPS TVs suffer from backlight bleed and blooming: This is less of an issue with high-end IPS TVs, but some cheaper models may suffer from glow (bright, greyish areas near the corners of the screen) or backlight bleed (patches or leaks of light, usually around the edges).

OLED TVs can suffer burn-in: OLED displays are at risk of burn-in, a condition in which a static image left on for too long can get permanently ‘burned’ onto the display and may appear like a ghostly dark patch.

OLEDs may get dimmer with age: OLEDs use organic substances which tend to decay over time. So, OLED displays lose brightness with age. It is quite slow and modern OLED TVs are not as affected by this as older OLED TVs, and this really shouldn’t be an issue, but you need to be aware of this.

IPS TVs are much cheaper: OLED is a relatively newer technology and is more expensive to manufacture. Currently, very few companies make OLED display panels. LG Display makes most of the OLED panels found on OLED TVs, while Samsung Display, CSOT, LG Display, and BOE make OLED screens for smartphones and smaller products. Most manufacturers also tend to restrict OLED tech to their largest, most feature-packed range, fueling the perception of OLED being expensive.

Shopping for a new TV sounds like it could be fun and exciting — the prospect of a gleaming new panel adorning your living room wall is enough to give you goosebumps. But with all the brands to choose from, and different smart capabilities (we can explain what a smart TV is) to weigh, as well as the latest picture tech to consider, it can be daunting. Is this article, we compare OLED vs. LED technology to see which is better for today’s modern TVs. Once you determine which panel type is best for you, make sure you check out our list of the best TVs to get our editor’s recommendations.

If you’re in the market for a TV, you’ve likely heard the hype regarding OLED models. They’re thin, light, and offer incredible contrast and color that’s second to none. OLED is only one letter apart from the more common display type, LED, so what gives? Can they really be that different? In a word: Yes. That extra “O” makes a big difference, but it doesn’t automatically mean an OLED TV will beat an LED TV in every use case. Some TV manufacturers like Samsung use their own technology, called QLED to confuse consumers even more. Make sure that you spend some time looking at our comparison piece: QLED vs. OLED technology before you make your purchase decision.

When OLED TVs first arrived in 2013, they were lauded for their perfect black levels and excellent color, but they took a bit of a hit due to brightness levels that couldn’t compete with LED TVs. There was also a huge price gap between OLED TVs (not to be confused with QLED) and their premium LED counterparts. In fact, legend has it that OLED used to mean “only lawyers, executives, and doctors” could afford them. Thankfully, that’s no longer the case.

OLED TVs are much brighter than they used to be, and the prices have come down, especially with brands like Sony introducing competitive options in 2021. The LED market is due for a bit of a shake-up, too. For now, however, it’s time to take a look at how these two technologies differ and explore the strengths and weaknesses of each.

Non-OLED TVs are made of two main parts: An LCD panel and a backlight. The LCD panel contains the pixels, the little colored dots that make up a TV’s image. On their own, pixels cannot be seen; they require a backlight. When light from the backlight shines through an LCD pixel, you can see its color.

The “LED” in LED TV simply refers to how the backlight is made. In the past, a thicker and less-efficient technology called CCFL (cold-cathode fluorescent light) was used. But these days, virtually every flat-screen TV uses LEDs as its source of backlighting. Thus, when you see the term “LED TV,” it simply refers to an LED-backlit LCD TV.

That said, not all LED TVs are created equal. There can be differences in the number and quality of the LEDs used, which leads to differences in things like brightness and black levels. You may also have seen something called “QLED TV.” This is a type of LED TV that uses quantum dots to achieve better brightness and color. We’ll discuss QLED more below, but here’s a great overview of the differences between QLED and OLED TVs.

The “OLED” in OLED TV stands for “organic light-emitting diode.” OLEDs have the unusual property of being able to produce both light and color from a single diode when they’re fed electricity. Because of this, OLED TVs don’t need a separate backlight. Each pixel you see is a self-contained source of color and light.

Some of the inherent benefits of OLED screens are that they can be extremely thin, flexible, and even rollable. But the biggest benefit when we compare them to LED TVs is that each individual pixel receives its own luminance and power (as opposed to LED TVs, which have persistent pixels that require an external source of light to see). When it’s on, you can see it. When it’s off, it emits no light at all — it’s completely black. We’ll discuss how this affects black levels in a moment.

Currently, LG Display is the only manufacturer of OLED panels for TVs, famed for top-line models like the CX. Sony and LG have an agreement that allows Sony to put LG OLED panels into Sony televisions — like the bright X95OH — but otherwise, you won’t find OLED in many other TV displays sold in the U.S.

The differences in performance between LG’s OLED TVs and Sony’s result from different picture processors at work. Sony and LG have impressive processors that are also unique to each brand, which is why two TVs with the same panel can look drastically different. A good processor can greatly reduce issues like banding and artifacting and produce more accurate colors as well.

Samsung does make OLED smartphone panels, and the company recently announced it would start building new TV panels based on a hybrid of QLED and OLED known as QD-OLED, but it will be a few more years before we see the first TVs that use this technology.

Though they don really similar acronyms, an OLED TV is not the same as a QLED TV. The latter is actually based on LED tech, but it uses a technique that overlays self-emissive quantum dots over the pixels that help produce better brightness, vividness, and color accuracy. QLED is more of an iterative step than a generational leap, and though we’d certainly recommend buying one if OLED is out of reach, expect its eventual deprecation as technologies like quantum dot OLED (QD-OLED) and microLED take hold.

Despite the name, microLED has more in common with OLED than LED. Created and championed by Samsung, this technology creates super-tiny, modular LED panels that combine light emission and color like OLED screens do, minus the “organic” part. For now, the technology is primarily being used for extra-large wall TVs, where colors, blacks, and off-angle viewing are excellent but with more potential for greater brightness and durability than OLED TVs.

For the average consumer, microLED isn’t anything to consider yet. It remains difficult to scale down to less-than-gigantic TVs, and it’s unlikely to hit homes for another couple of years when it will still be exceedingly expensive. Of course, that was once true of OLED, which is why this tech is worth keeping an eye on for a future TV replacement.

Editor’s note: Since OLED TVs are still a premium display, we have compared OLED only to equally-premium LED TVs armed with similar performance potential (except, of course, in the price section).

A display’s ability to produce deep, dark blacks is arguably the most important factor in achieving excellent picture quality. Deeper blacks allow for higher contrast and richer colors (among other things) and thus a more realistic and dazzling image. When it comes to black levels, OLED reigns as the undisputed champion.

LED TVs rely on LED backlights shining behind an LCD panel. Even with advanced dimming technology, which selectively dims LEDs that don’t need to be on at full blast, LED TVs have historically struggled to produce dark blacks and can suffer from an effect called “light bleed,” where lighter sections of the screen create a haze or bloom in adjacent darker areas.

OLED TVs suffer from none of the black-level problems of traditional LED TVs. If an OLED pixel isn’t getting electricity, it doesn’t produce any light and is, therefore, totally black. Sounds like an obvious choice to us.

When it comes to brightness, LED TVs have a considerable advantage. Their backlights can be made from large and powerful LEDs. With the addition of quantum dots, that brightness can be preserved even as the size of the individual LEDs get smaller. OLED TVs can get pretty bright, too, and with such dark black levels, the contrast between the brightest and darkest spots on screen is all the more exaggerated. But cranking OLED pixels to their maximum brightness for extended periods reduces their lifespan, and the pixel takes slightly longer to return to total black.

With those considerations in mind, it’s important to note that all modern TVs — whether OLED, LED, or QLED — produce more than adequate brightness. The consideration then becomes where the TV will be used. In a dark room, an OLED TV is going to perform best, while LED TVs will outshine them (quite literally) in more brightly lit environments.

It should also be noted that there have been big gains recently in OLED brightness, making them perfectly suitable for nearly any situation, save direct sunlight beaming onto the screen. Still, when compared directly, LED TVs have the edge.

OLED used to rule this category, but by improving the purity of the backlight, quantum dots have allowed LED TVs to surge forward in color accuracy, color brightness, and color volume, putting them on par with OLED TVs. Those looking for TVs with Wide Color Gamut or HDR will find both OLED and LED TV models that support these features. OLED’s better contrast ratio is going to give it a slight edge in terms of HDR when viewed in dark rooms, but HDR on a premium LED TV screen has an edge because it can produce well-saturated colors at extreme brightness levels that OLED can’t quite match.

Because OLED pixels combine the light source and the color in a single diode, they can change states incredibly fast. By contrast, LED TVs use LEDs to produce brightness and tiny LCD “shutters” to create color. While the LED’s brightness can be changed in an instant, LCD shutters are by their nature slower to respond to state changes.

Refresh rate is how often the entire image on-screen changes. The faster the rate, the smoother things look, and the easier it is to pick out details in fast-moving content like sports. Most new TVs are capable of refresh rates of 120Hz, which means the entire image is updated 120 times every second. Some go as high as 240Hz.

If refresh rate were simply a matter of Hz, we’d call OLED TV the winner, simply because it can achieve rates of up to 1,000 times higher than LED TVs. But absolute speed isn’t the only consideration. Unlike movies and TV shows, which use a single refresh rate, video games often employ something called variable refresh rates, which simply means that the rate changes during different parts of a game. If a TV can’t match these rate changes, you end up with image tearing — a visible jerkiness that comes from the disparity between the rate the game is using and the rate the TV wants to use.

That’s why gamers, in particular, want TVs that can handle VRR or Variable Refresh Rate. It’s a rare feature on both OLED and LED TVs, but you can expect to see it show up on more models in both types of TVs. Right now, you can find VRR in certain Samsung, LG, and TCL TVs. But neither OLED nor LED TVs have a real advantage when it comes to VRR; some models have the feature, and some don’t. Your gaming system also has to support VRR, though that shouldn’t be much of an issue if you own a new Xbox Series X, PS5, or even a PS4/One X.

Finally, input lag is the gap in time between when you press a button on a game controller and the corresponding action shows up on-screen. Input lag can be a problem when TVs introduce a lot of picture processing that causes a slow-down in the signal they receive. But most modern TVs have a game mode, which eliminates the processing and reduces input lag to barely discernible levels. In the future, all TVs will be able to sense the presence of a video game and switch to this mode automatically, returning to the processed mode when gaming stops.

OLED, again, is the winner here. With LED TVs, the best viewing angle is dead center, and the picture quality diminishes in both color and contrast the further you move to either side. While the severity differs between models, it’s always noticeable. For its LED TVs, LG uses a type of LCD panel known as IPS, which has slightly better off-angle performance than VA-type LCD panels (which Sony uses), but it suffers in the black-level department in contrast to rival VA panels, and it’s no competition for OLED. Samsung’s priciest QLED TVs feature updated panel design and anti-reflective coating, which make off-angle viewing much less of an issue. While OLED still beats these models out in the end, the gap is closing quickly.

That said, OLED TVs can be viewed with no luminance degradation at drastic viewing angles — up to 84 degrees. Compared to most LED TVs, which have been tested to allow for a max viewing angle of 54 degrees at best, OLED has a clear advantage.

OLEDs have come a long way in this category. When the tech was still nascent, OLED screens were often dwarfed by LED/LCD displays. As OLED manufacturing has improved, the number of respectably large OLED displays has increased — now pushing 88 inches — but they’re still dwarfed by the largest LED TVs, which can easily hit 100 inches in size, and with new technologies, well beyond.

LG says you’d have to watch its OLED TVs five hours a day for 54 years before they’d fall to 50% brightness. Whether that’s true remains to be seen, as OLED TVs have only been out in the wild since 2013. For that reason and that reason only, we’ll award this category to LED TVs. It pays to have a proven track record.

Can one kind of TV be healthier for you than another? If you believe that we need to be careful about our exposure to blue light, especially toward the evening, then the answer could be yes. Both OLED and LED TVs produce blue light, but OLED TVs produce considerably less of it. LG claims its OLED panels only generate 34% blue light versus LED TV’s 64%. That stat has been independently verified, and LG’s OLED panels have been given an Eye Comfort Display certification by TUV Rheinland, a standards organization based out of Germany.

Will it make a difference to your overall health? We think the jury is still out, but if blue light is a concern, you should take a serious look at OLED TVs.

The effect we’ve come to know as burn-in stems from the days of the boxy CRT TV when the prolonged display of a static image would cause an image to appear to “burn” into the screen. What was actually happening was the phosphors that coated the back of the TV screen would glow for extended periods of time without any rest, causing them to wear out and create the appearance of a burned-in image. We think this should be called “burn out,” but we’ll set that one aside.

The same issue is at play with plasma and OLED TVs because the compounds that light up can degrade over time. If you burn a pixel long and hard enough, it will dim prematurely ahead of the rest of the pixels, creating a dark impression. In reality, this is not very likely to cause a problem for most people — you’d have to abuse the TV intentionally to get it to happen. Even the “bug” (logographic) that certain channels use disappears often enough or is made clear to avoid causing burn-in issues. You’d have to watch ESPN all day, every day for a long, long time at the brightest possible setting to cause a problem, and even then, it still isn’t very likely.

That said, the potential is there, and it should be noted. (This is also a contributing factor in the dearth of OLED computer monitors on the market, as computer screens are far more likely to display a static image for hours on end.) Since LED TVs aren’t susceptible to burn-in, they win this fight by a technicality.

OLED panels require no backlight, and each individual pixel is extremely energy-efficient. LED TVs need a backlight to produce brightness. Since LEDs are less energy-efficient than OLEDs, and their light must pass through the LCD shutters before it reaches your eyes, these panels must consume more power for the same level of brightness.

OLED TVs are premium TVs and almost always likely to be more expensive than an LED version of the same size. However, we have seen prices starting to drop down to manageable levels recently, especially if there are any discounts running. MSRPs can go as low as $1,300 to $1,500, but you probably won’t find many lower than that.

Conversely, LED TVs can range in price from a few hundred dollars — even for a quality big-screen model — to several thousand dollars, making them overall more accessible than OLEDs. While prices of the highest-quality LED TVs hover at nearly the same range as the price of OLEDs, when judged by price and price alone, LED TVs can still be acquired for a pittance in comparison.

In terms of picture quality, OLED TVs still beat LED TVs, even though the latter technology has seen many improvements of late. OLED is also lighter and thinner, uses less energy, offers the best viewing angle by far, and, though still a little more expensive, has come down in price considerably. OLED is the superior TV technology today. If this article were about value alone, LED TV would still win, but OLED has come a long way in a short time and deserves the crown for its achievements. Regardless of which technology you ultimately decide on, that’s not the only factor that you need to consider, so be sure to check our TV buying guide to make sure you’re buying the right TV to meet your needs.

TFT LCD is a mature technology. OLED is a relatively new display technology, being used in more and more applications. As for Micro LED, it is a new generation technology with very promising future. Followings are the pros and cons of each display technology.

TFT Liquid Crystal Display is widely used these days. Since LCD itself doesn"t emit light. TFT LCD relies on white LED backlight to show content. This is an explanation of how TFT LCD works.

Relatively lower contrast：Light needs to pass through LCD glasses, liquid crystal layer, polarizers and color filters. Over 90% is lost. Also, LCD can not display pure black.

Organic Light-Emitting Diode is built from an electro-luminescent layer that contains organic compounds, which emit light in response to an electric current. There are two types of OLED, Passive Matrix OLED (PMOLED) and Active Matrix OLED (AMOLED). These driving methods are similar to LCD"s. PMOLED is controlled sequentially using a matrix addressing scheme, m + n control signals are required to address a m x n display. AMOLED uses a TFT backplane that can switch individual pixels on and off.

Low power consumption and flexible: OLED doesn"t rely on backlight and consumes less power. OLED is essentially created on plastic film. It is bendable and easy to process.

High contrast and vivid color: OLED emits light itself, can produce very bright image with beautiful color. And because OLED can be turned off, it can produce true black.

Stroboscopic effect: most OLED screen uses PWM dimming technology. Some people who are easy perceive stroboscopic frequency may have sore eyes and tears.

​Micro LED, sometimes called μLED is made up of tiny LED, measure less than 100μm. Another way of looking at this is that MicroLEDs are simply traditional LEDs shrunk down and placed into an array.

Replacing organic material with inorganic GaN material eliminates the need of polarizing and encapsulation layer, found in OLED. Micro LED is smaller and thinner, consumes less power.

Competition and innovation are hallmarks of the consumer electronics market which has experienced practically uninterrupted growth for decades. Many consumers own a range of electronic devices (laptop, smartphone, tablet, TV, etc.), each of which is available in a plethora of options: brands; grades, formats; technologies. This technological array is further complicated by marketing terms that try to differentiate between competing products. Acronyms like OLED and LCD are rife in the electronics sector, but what is the actual difference between the two?

The inordinate popularity of smart consumer devices continues to drive growth in the global display market, currently valued in the region of $135 billion. Screens based on LEDs (light-emitting diodes) used to be the industry-standard, but trends towards device miniaturization, portability, improved efficiency, and greater picture quality gradually fuelled OLED (organic light-emitting diode) panels. Over the next few years, the OLED market is expected to expand by a CAGR (compound annual growth rate) of 14.27%.

Currently, OLED televisions outperform traditional LED products on several fronts. They come in a versatile range of formats: panels as large as 88-inches satisfy the demands of premium TV displays; while smaller AMOLED (active-matrix OLED) screens set the benchmark of picture quality in the smartphone industry. Foldable OLED devices have finally begun to enter the consumer electronics market too, fulfilling a long-standing promise from proponents of the technology.

Traditional LED TVs are based on liquid crystal display (LCD) screen technology; a tried-and-tested panel structure. On an LCD screen, images are produced by a thin layer of liquid crystal solution overlaid on a transistor grid which uses small electrical charges to set the individual crystals to an open/closed state. This produces a pattern of light and dark pixels, but the light itself is produced by a bank of LEDs arranged at the edges of the screen or in a backlit array.

The best possible picture on LCD screens is produced using a full-array LED backlight with local-dimming which yields the widest possible contrast. However, LCDs comprise multiple sequential layers within the panel (color filters, polarizers, etc.) which are necessary for producing fully-saturated images but may inhibit picture uniformity and viewing angles. This also makes LED TVs thicker and heavier, rendering them undesirable for applications where reduction of thickness or weight is important.

OLEDs circumvent each of these issues by eschewing a backlight in favor of a self-emissive panel of organic carbon-based material. This allows each subpixel onscreen to be controlled independently. Alongside greater dynamic ranges and energy efficiency, the unique characteristics of OLED panels allow for significantly fewer layers in the screen matrix. Consequently, OLED TVs are typically thinner and lighter in weight than conventional LCDs, but cost significantly more to produce than LCD displays.

Avantama is one of the industry-leading formulators for consumer electronics applications, generating solutions for today’s cutting-edge displays and devices. If you would like more information about our full portfolio of nanoparticle inks and dispersions for OLED manufacturing, simply contact a member of the Avantama team today.

There are two main competing display technologies in the market today: LCD and OLED. The mature and dominant technology is the Liquid Crystal Display (LCD), while the up-and-coming challenger is the Organic Light Emitting Diode Display (OLED display). The main difference between LCD and OLED displays is how they create the light and the colors of the image being displayed. This leads to application dependent strengths and weaknesses of either technology.

OLEDs operate via a solid-state technology, where the individual pixels can emit light in various colors and intensity without the need for an additional light source or color filter. The light-emitting portion of an OLED display is comprised of multiple layers of very specific organic semiconductor materials which can be adjusted to emit light in specific wavelengths. These organic layers have a typical thickness in the order of 100nm. In addition, no backlight is required, allowing for a very thin display module.

The organic layers beginning on the cathode side of the device consist of several electron transport layers, a recombination layer and end with a hole transport layer on the anode side. The electron transport layers in the OLED stack-up allow movement of electrons from the cathode toward holes supplied from the anode. The electrons and holes recombine in the emissive recombination layer of the film stack-up. This recombination relaxes the energy levels of the electrons, which produces an emission of light. The wavelength of the emitted light is dependent on the chemical composition of the organic materials used in the recombination layer. The intensity of the light is controlled by the amount of current flowing through the OLED’s organic layers. In OLEDs, the individual pixels can emit red, green, or blue light, or – alternatively – they emit white light, which must then pass through color filters.

There are two main varieties of OLED screens: active-matrix and passive-matrix. The difference lies in how the pixels are generated. In the passive-matrix version, each pixel is created by the intersection of two wires, through which electrical current is passed to create a different color. In an active-matrix setup, each pixel has its individual transistor, which allows for faster refresh times and creates smoother motion and transitions in the picture.

In LCD display technology, the individual pixels modulate light. An applied voltage changes the orientation of liquid crystal molecules that – in conjunction with a pair of polarizers – function as a light shutter by either blocking or allowing light to pass through. LCD displays, therefore, require an additional light source, either from reflected ambient light or more commonly from a “backlight” (an array of LEDs arranged behind or next to the LCD panel). LCD color can be created by adding color filters to the individual pixels. Because OLED displays don’t require the additional backlight, polarizers, or color filter components of an LCD module, they can be made much thinner than LCD displays of equivalent size and resolution.

OLED display technology can offer power-saving advantages over LCDs, which is important, especially for battery-powered applications such as mobile phones. An OLED’s power consumption will vary with image content and brightness, as light is generated only at the individual pixels needed to display the image. A dark image or a graphic on a black background will consume much less power than bright images or graphics. In contrast, LCD backlights must be ON while the display operates. It’s possible to control individual zones of the backlight separately to save power, but this added complexity is usually only applied in larger displays.

OLEDs can achieve a much higher contrast ratio if reflections from the front surface are carefully controlled. If no current flows through an OLED pixel, it does not emit any light. In contrast the shutter effect of an LCD pixel does not block 100% of the light. Depending on the specific LCD technology used and the angle of observation, a small percentage of the light generated in the backlight can escape. This can wash out dark areas of an image. It is possible but expensive to limit this light leakage to a point where the contrast of an LCD and OLED display become perceptually equivalent.

RGB OLEDs naturally generate a narrow bandwidth of light. This leads to very saturated primary colors and a wide color gamut. This enables OLED technology to display colors which are not easily accessible to LCDs unless RGB backlights or quantum dots are used. Often OLED colors are used “as is”, however, for very high image color fidelity, such high color saturation needs to be electronically ‘tuned down’, to match the color bandwidth of the rendering chain.

LCDs offer an advantage over OLEDs in applications where a continuous static image is required. The light emitting materials in OLEDs are affected by luminance decay as a function of the total amount of current that has passed through the pixel. This decay differs for red, green and blue. The dimming effect is subtle, but when adjacent pixels are illuminated at the same time it can become noticeable as an undesired brightness variation or color shift. LCDs don’t suffer from this dimming effect, which makes them a more suitable solution for applications with static images or images with static elements.

Another advantage of LCD technology is the wide variety of different variations to choose from. Depending on the application certain trade-offs can be very attractive. An example is much lower cost for a laptop display compared to a tablet. This is achieved by allowing poor image performance when viewed from the direction the is usually blocked by the keyboard. In a tablet where good viewing performance is required from any direction, much higher cost LCDs or OLEDs must be used.

OLEDs offer an excellent solution for a variety of applications: Glucometers, thermometers, fitness trackers, professional audio equipment, Wi-Fi hotspots, radar detectors, dive computers, biometric transaction devices, and military communications equipment.

They can be used to replace old TN LCDs or add dynamic push buttons on industrial equipment. They can be customized to various resolutions, FPC configurations, colors, custom shaped OLED displays (e.g. octagonal, round, etc.) and can even be made into flexible and transparent displays. Thanks to their versatility, OLED display panel suppliers can offer some exciting capabilities for their customers – things that were previously impossible with LCDs.

As an experienced LCD and OLED panel supplier, New Vision Display can help you find the right technology for your application. Contact us via the below form to discuss your project.

OLED displays are commonplace on all high-end phones, tablets, smartwatches, televisions, and even many of the many budget phones. However, there isn"t one type of OLED technology. Depending on your device, you may have an OLED, AMOLED, or POLED display.

OLED promises inky blacks, high contrast, low response times, and incredible brightness. There are a few downsides (primarily the burn-in phenomenon), but overall it"s the best screen technology you"ll find. We explain the background behind the acronyms, the difference between POLED and AMOLED, and which is better, helping you choose the right phone.

Before we get into the differences between the types of OLED screens, let"s look at the similarities. Regardless of your OLED device, whether a laptop or a smartphone, there are some standard fundamentals.

Every OLED screen comprises millions of diodes, hence the name organic light-emitting diode. Viewed under a microscope, each screen consists of a series of red, green, and blue diodes that can be individually turned on and off. Behind this, the light-emitting pixels of an OLED display emit blue and yellow light. The yellow and blue light combine to form white light, passing through the red, green, and blue subpixels to produce a single pixel. Because each pixel handles its light and color, OLED displays do not need a separate backlight.

As an OLED screen doesn"t need a backlight, black is produced by turning off the pixels, resulting in deep, consistent blacks. This allows manufacturers to implement things like an always-on display without quickly burning through battery life.

Another critical advantage of OLED tech is high contrast ratios. Technically, OLED displays offer "infinite contrast," or 1,000,000:1 contrast ratios. This is because OLED displays reproduce black by turning off pixels entirely, and contrast is measured by comparing the brightest part of the screen to the darkest part. Improved contrast makes on-screen content