ebike s866 lcd display settings parameters pricelist

Any P2 except 0 doesn"t show any speed on the display. Possibly this parameter is for motors with build-in speed sensor, and 0 just shows speed using hall sensors. P2=0 shows correct speed in walk assist mode.

2. When I"m trying to drive on PAS, it starts to accelerate till about 8 km/h, and then I hear that strange sound. After that bike stop acceleration BUT the motor spins up rapidly and display increasing speed up to 25 km/h. It seems like the motor works as designed, but doesn"t provide torque on the wheel. Possible mechanical failure? Internal motor freewheel for example. But it worked well with the stock controller on all speeds and loads..

Note: The value here is based on kilometers. When the unit setting is converted from kilometers to miles, the speed value on the display interface will be automatically converted to the correct mile value, but the speed limit value data set in this menu under the mile interface No conversion, it is inconsistent with the actual displayed mile speed limit value;

Note: Due to the upgrade of the company"s products, the displayed content of the product you get may be different from the manual, but it will not affect your normal use.