ebike s866 lcd display settings parameters for sale

Note: The value here is based on kilometers. When the unit setting is converted from kilometers to miles, the speed value on the display interface will be automatically converted to the correct mile value, but the speed limit value data set in this menu under the mile interface No conversion, it is inconsistent with the actual displayed mile speed limit value;

Note: Due to the upgrade of the company"s products, the displayed content of the product you get may be different from the manual, but it will not affect your normal use.

I just bought an S866 LCD paired with a BrainPower 36/48v 350 Watt controller and had both the E10 and E30 errors and after 4 hours of diagnosing what was wrong i found 2 issues.

P07: Number of speed magnets: Range: 1-100; This parameter is related to the display speed of the meter and needs to be entered correctly. If it is a normal hub motor, directly input the number of magnetic steel; If it is a high speed motor, it is also necessary to calculate the reduction ratio, input data = number of magnets × reduction ratio; For example: motor magnet steel number 20, reduction ratio 4.3: input data: 86=20×4.3

P08: Speed limit: the range is 0-100km/h, 100 means unlimited speed. The input data here indicates the maximum running speed of the vehicle: for example, input 25, indicating that the maximum running speed of the vehicle does not exceed 25km/h; the driving speed is maintained at the set value. Error: ±1km/h; (both assist and speed limit) Note: The value here is based on kilometers. When the unit setting is converted from kilometer to mile, the speed value of the display interface will be automatically converted to the correct mileage value, but the speed limit value data set at this menu under the mile interface. No conversion, inconsistent with the actual display mile speed limit value;

I tried the S866 with my 1500W KT-36/48v before diagnosing so not sure if still getting the E10 because not sure what protocol the KT controller communicates on