tontec 7 inch lcd touch screen 720x480 free sample

approx. ...6 hours total print time/ top piece or bezel screen holder with ribbon cable passage bottom hold 2 pcb boards Case to contain the 7" touch screen and 2 circuit boards Print Settings Printer: Prusa I2 Rafts: No Supports: No Resolution: 300

Este es un remix del case builttospec , en mi caso tengo la raspberry pi 3 b y tengo una pantalla tontec 3.5 , y no habia en ningun lado el case para ambos, hice una pequeña modificacion para que la pantalla que tiene muescas en los cuatro lados se...

A version 1.0 of a screen case for a 7" screen. It is intended to be mounted onto a printer frame and connected to a Raspberry Pi 3 for use as an "on-printer" computer. The screen will require: 4 M3/M4 5mm screws and nuts for the screen mounting. 4...

This is a 7" LCD display enclosure for this screen: http://www.waveshare.com/7inch-HDMI-LCD-C.htm At the moment, all I"ve got is the top panel, though I added the sides in the OpenSCAD project file. It needs pillars in the corners, so I can put a...

This is a screen case for the "7inch HDMI Display-B" with USB capacitive touch, Model number MPI7001. The screen is available on amazon at the following link:...

There was a set that were made for the screen without a case and those were too small and the back of the case went below the feet. Because there were no design files I could not remix it so I created my own from scratch. These were made to fit the...

This enclosure will host the official 7" touch screen from the Raspberry Pi fundation, plus a regular size Raspberry Pi. The screen snap fits nicelly, but can be removed very easily. It must be printed with the front side (the one where the screen...

Cover for Monitor 7" Touch Screen - SainSmart Link for Buy: http://amzn.to/2qbmRNm SainSmart 7 pollici TFT LCD Touch Screen Monitor per Raspberry Pi + driver scheda HDMI VGA 2AV...

This enclosure will host the official 7" touch screen from the Raspberry Pi fundation, plus a regular size Raspberry Pi. The screen snap fits nicelly, but can be removed very easily. It must be printed with the front side (the one where the screen...

The [original](https://www.thingiverse.com/thing:2315736) from [MiguelBi](https://www.thingiverse.com/MiguelBi) had hexagon grids both in the back layer and in the middle layer, making it...

Found this frame for the 7" Touch Screen Display and it fits the screen like a glove and still allows for menu buttons to be used, great design. Only thing that would make this frame perfect for me would be having a bracket to hang it on Skadis...

Post a make! I had to flip my screen as it was up-side down: In Terminal: sudo nano /boot/config.txt Add line: lcd_rotate=2 To exit: Ctrl + X Y Enter sudo reboot Links: Raspberry Pi 7" Touch Screen Display on Amazon GeeekPi 4010 Blue LED fan on...

I needed a touch screen to be used by a Raspberry Pi via HDMI and decided to test this one : https://www.aliexpress.com/item/32832814420.html?spm=a2g0s.9042311.0.0.547d4c4dOFYiZL I also designed a case to the specific dimensions of this screen with...

I needed a touch screen to be used by a Raspberry Pi via HDMI and decided to test this one : https://www.aliexpress.com/item/32832814420.html?spm=a2g0s.9042311.0.0.547d4c4dOFYiZLI also designed a case to the specific dimensions of this screen with an...

3d .stl files for creating an enclosure for the official 7" touch screen for the Raspberry Pi. There is a separate file for for enclosing the RasPi B module.(or RasPi 2) It is attached with 4 slide on interlocking clips for easy removal for...

UPDATE1: Fitted to actual screen from https://grabcad.com/library/innolux-7-tft-lcd-at070tn83v-1. Anyway i had to fix bezels and size. Mine is 100x165 mm.

This is a supporting mount for the official 7" IPS-Display and the 7" Capacitive-Touchpanel-Overlay of the LattePanda single board computer. The mount stands above the LattePanda board, you may need extra M3 screws to get it installed.