lcd screen side panel price

LCD Spec: 19” transparent TN LCD side panel display with 1280 x 1024 resolution enabling the complete customization of the side panel. Users can configure the digital display to feature video wallpaper, images, or system temperatures in real-time

Around 3 years ago, I started planning a build to replace my aging i5-3570K PC. I wanted something unique - something that couldn"t be simply purchased off the shelf. RGB was just getting big, so I went against the RGB trend and started looking into other ways to make my build stand out. Eventually, I was led to research transparent LCD side panel mods.

You can find a full build log here, which includes more pictures and even videos of it in action: https://forum.level1techs.com/t/time-for-my-second-build-a-project-lcd-case-v2-v3/135450/

I saw a really cool video of a PC case called "Snowblind", that had a transparent LCD Screen as a side panel. I was amazed over how cool it was. The only problem was that it was really expensive. Therefore, I tried making my own! In this instructables I will go through how I made it, and how you could make your own. The best of all, since it was made from an old monitor that was thrown away, it was basically free! I just added some LED strips on the inside of the case to get better contrast on the screen. You could probably re-use the monitors backlight, but it"s safer and easier to just get some cheap LED strips.

First, remove the frame of the panel. It is fixed with clips, so just bend the frame a little and lift the frame up. Next, separate the front LCD from the backlight. For the next step, you will have to be careful. This step involves removing the anti glare film. It is glued to the panel, and therefore it"s easy to break the LCD when trying to remove it.

Then you are done modding the LCD! Now, you can hook it up to the panel and test it. Just be careful with the ribbon cables going from the LCD PCB to the panel.

The side panel of this case fits the LCD perfectly. Just line it up to the side facing the back, and to the top, and use some tape to tape it to the glass. Then, use some vinyl on the outside where the LCD is not covering the glass.

Next, use some double-sided tape to fix the LED strips to the inside of the frame. Then, solder them together in series. You can now solder on a wire and connect them to the 12V line of the Molex connector.

It"s really important to have lots of lights inside the case, to make it easier to see the LCD. Therefore, try to fill the case with even more LED strips.

You are now ready to assemble everything. In this case, the controller fit nicely in the hard drive compartment, so I glued it there and fed the ribbon cable through the hole in the inside of the case. That way it was pretty much hidden inside the case.

Now you can carefully mount the side panel back on the computer. You might have to drill a new hole for the thumb screw in the back to make it fit properly.

You can now power up the computer, open the screen settings and set it up for dual screens. You might have to flip the display 180 degrees too. When you have done that, open Wallpaper Engine and set a wallpaper of choice!

Hey I have a little question, I also have a Dell 1905FP, but I think it"s an older model because I don"t have a ribbon cable but a normal cable with a plug. My problem is that I have peeled off one film but it still looks like there is a second film on the back because it is still a little blurry. But I"m afraid that if I try to pull them off, my LCD display will break. Maybe you have an idea. Thanks in advance

Great tutorial and video! I"m trying my hand at replicating your process and I even got my hands on the exact monitor. I have reached the point where I"ve disassembled the panel and controllers, and discharged the capacitors from the PSU, but I am a little stuck at this point because I don"t know how to wire up the molex header. I watched your video and saw that you had two wires soldered to the power connector. Which connectors are they and where do they go on the molex cable? Thank you!

Terrific job! May I ask why you would need to remove the front polarizer? If my understanding is correct, both the front and back polarizers are needed in order for the LCD to work properly (i.e., the light gets polarized by the back polarizer first, and then passes through the front polarizer)? You comments will be appreciated!

Is it possible that you post or send me photos of the inside of the case when you have this installed? I"m just a bit confused on how you wired up everything?

I tried taking some photos, but I have covered the screen PCB with a cover, so it was hard to see in the photos. I basically just laid it inside the case with a 90-degree angle. I tried drawing it here: (view from the front)0

I used "wallpaper engine" to just set the animations as wallpaper on that screen. I mentioned it in the last step, but I could probably make a own step about that, if you are interested in more details.2

I think you should have more pics and info about the re- mounting the LCD. After all if you don"t do it right all that work is for nothing. While I understand your wiring diagram, I think that it should be explained and a larger part of this Instructible...for example to get white lite your are powering all 3 lanes (red,green,blue) on the RGB tape.

Hello, Wonderfull project, I have the same case and I would love to do it (if I have time and the screen to the right size). Just a question, can you put a photo of the cable connection to see if it"s easy to open the case ? One little suggestion, instead of connecting the panel to the graphic card (which mean to run a cable outside, why don"t you use a USB to VGA or DVI converter (like this https://www.amazon.fr/Adaptateur-convertisseur-adaptateur-Affichage-multi-écrans/dp/B079L81FRD/ref=asc_df_B079L81FRD/?tag=googshopfr-21&linkCode=df0&hvadid=227894524041&hvpos=&hvnetw=g&hvrand=17927658121409960098&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9055710&hvtargid=pla-442905712462&psc=1) ?

As shared by @momomo_us on Twitter,(opens in new tab) ASRock has built a new accessory for PC builders that allows you to turn your PC chassis" side panel into an LCD monitor. The gadget is a 13.3" side panel kit designed to be tapped to the inside of your see-through side panel, giving users an additional display for monitoring system resources and temperatures or being used as a secondary monitor altogether.

The screen is a 16:9 aspect ratio 1080P IPS 60Hz display, measuring 13.3 inches diagonally. This screen is the equivalent of a laptop display. It uses the same connection method as laptops, featuring an embedded DisplayPort (eDP) connector.

As a result, only ASRock motherboards support the side panel, and only a few models at best, with less than ten motherboards featuring the eDP connector. The list includes the following motherboards: Z790 LiveMixer, Z790 Pro RS/D4, Z790M-ITX WiFi, Z790 Steel Legend WiFi, Z790 PG Lightning, Z790 Pro RS, Z790 PG Lightning/D4. H610M-ITX/eDP, and B650E PG-ITX WiFi.

It"s a shame this accessory won"t get mainstream popularity due to these compatibility issues. But for the few users with the correct motherboard, this side panel kit can provide a full secondary monitor that takes up no additional space on your desk. The only sacrifice you"ll make is blocking all the shiny RGB lighting inside your chassis.

There are plenty of unique computer cases on the market, but iBuyPower"s Snowblind Element separates itself from the pack with a transparent 19-inch LCD side panel with a 1024x1280 resolution to both show off your PC and display various graphics. It"s a little bit trippy, and it"s half off right now.

Pretty neat, right? The Snowblind Element is based on NZXT"s S340 mid-tower, which is a good starting point. Unlike a regular S340, however, the side panel on the Element can display custom images, meters, and video wallpapers to give your setup a distinctive look.

What started off as an NZXT S340 morphed into a Snowblind Element, with a customizable transparent LCD side panel. If you want a case that stands out from the crowd, this is it.

Priced at $299 (MSRP), the Element is normally a tough sell, even with the nifty side panel. That"s why this deal is so enticing—it puts the case within reach of more reasonable budgets. I didn"t have a bead on this one during Black Friday and Cyber Monday, but according to a thread on Reddit (fist-bump for the heads up on this deal), it dropped to $129 during the former and $200 during the latter.

iBUYPOWER"sSnowblind Element might look like an average mid-tower chassis but it offers a very uniuque design in the form of its transparent LCD side-panel. The case is on sale for $129 US, a full $200 US discount over its standard $329 US price. The case includes three fans, a tempered glass side panel, and a lot of RGB lighting. The unique feature of this case is the side panel not only is it a tempered glass, but it also works as a translucent LCD screen, allowing for endless customization!

The Snowblind Element offers three pre-installed fans, two 120 mm fans located in the front and one 120 mm fan installed in the rear of the case, this case does also include dust filters to make sure the inside of your case stays beautiful and free of any dust.

The supported motherboard sizes are ATX, Micro-ATX, and Mini-ITX, which means that any motherboard should fit with no issue and also supported is any GPU with a length of 14.3 inches (or 364 mm). This means that this case can support even an RTX 2080 ti with no issues, and with the seven card slots, you could have an SLI setup with no problems. Not only does this case allow you to change the side panel display at a moment"s notice, but this case is also able to accommodate everything from more fans, offering two 140 mm or 120 mm fans slots on the bottom of the case. Unfortunately, no fan slots are available on the side of this case.

The unique feature of this Snowblind Element is the translucent LCD panel, which allows you easily to display your computer"s information on a fresh design with little to no issue. This display is a 1024 x 1280 resolution, but I wouldn"t suggest playing any games on this being this display is only rated for 60 Hz and has a fair amount of input lag.

Lenovo ThinkPads are a commonly used laptop in personal computing. Like all mobile products, however, screens can sometimes become damaged or cracked. If you need to repair or replace the LCD screen on your Lenovo ThinkPad, here are some answers to some commonly asked questions.How do you choose the right screen?

In order to get the right replacement screen for your ThinkPad, you will need to know the model number. Depending on when your ThinkPad was manufactured, there are several ways to find the model number. On some ThinkPads, the model number will be printed directly onto the bezel (case) below the LCD screen. On most laptops, the machine type (model number) will also be printed on a label on the bottom of the laptop. If the label is missing, damaged, or illegible, there are still a few other ways to find that information. Here are some other ways to find the model information for your ThinkPad:Check under BIOS.

Many LCD displays are actually comprised of two different parts: the LCD itself and a glass cover. In some cases, the LCD screen itself is fine; it is just the glass cover that needs to be replaced. In other cases, the entire LCD display needs to be replaced. If just the glass cover needs to be replaced, keep in mind that the LCD screen itself can still become damaged while replacing the glass cover. When ordering a replacement screen, it is important to make sure you know what you are getting. Some offers are for the glass cover by itself, some are for just the LCD screen and glass, and others are for the entire top half of the laptop, including the LCD, glass, and outer case. In many cases, replacing the entire top half of the laptop can be simpler and less time-consuming than replacing the LCD or glass. Replacing the entire top half of the laptop also generally requires less technical capability.Can screens be upgraded?

Many parts on Lenovo products can be upgraded to improve a ThinkPad"s speed or performance, but a screen is not one of them. Each screen is specifically manufactured and calibrated for a specific Lenovo product. Each product also needs specific drivers to operate specific screens as well. Though the size of a screen may be exactly the same from one Lenovo product to another, they are not interchangeable. You need to be sure, when ordering a replacement part, that you are ordering a part specifically designed for your model of ThinkPad. For example, if it is designed for a 14-inch screen, you need to order one exactly that size.

Transparent plastic and tempered glass have been the standard for PC cases for over a decade now. So if you’re going to be constantly looking at your PC’s guts, why not just end the pretense and stick a whole-ass monitor in there? That’s the idea behind the Side Panel Kit, a full 13.3-inch, 1080p monitor that sits behind the transparent panel of your PC case and connects directly to your motherboard. The screen acts as a standard monitor in Windows, displaying whatever you want.

This isn’t the first time we’ve seen massive screens mounted directly onto a desktop PC. In addition to novelties like smaller LCDs attached to CPU AIO pumps, RAM, graphics cards, and probably the backside of the motherboard by now, you might recall iBuyPower’s Project Snowblind. It also turned the entire side of a PC case into a display, albeit a transparent one designed more to show supplementary data. In comparison, Asrock’s screen is relatively basic. It’s just a nice little IPS LCD that sticks to the inside of your PC case with the included mounting brackets.

While the screen should be installable into any case that can physically house it (you’ll need a clear area on the side panel 300mm by 193mm, horizontal or vertical), there’s one little foible to the design that might be a dealbreaker. The screen connects directly to the motherboard via an Embedded DisplayPort (eDP) cable for both data and power, as noted by Tom’s Hardware. eDP is a standard connection often seen in laptop screen panels, but it’s rarely seen in consumer-facing electronics…and Asrock is the only company making motherboards with an eDP connection built-in. There’s no easy way to make an adapter, either, since unlike regular DisplayPort it includes electrical power as well.

At the time of writing only a handful of Asrock motherboards support the screen, mostly in the Z790 series (Intel 1700, with one B650 option for Ryzen fans). You can expect more high-end boards from Asrock to include the connection in the near future. Maybe by then the company will actually have an option to buy the Side Panel Kit, because it doesn’t appear to have a shipping date or price at the moment.