tft display driver circuit in stock

LAPIS Technology"s display drivers realize uniform and fast pixel charging for 8K 120Hz, 75-inch, and larger panels with the unique technology of panel load charging.

Gaming monitors require a higher refresh rate *1 in order to display video smoothly.The higher the refresh rate, the shorter the time required to write the display data.

LAPIS Technology"s display drivers use high-speed point-to-point interface technology *2 (4Gbps), which enables large amounts of display data transfer in a short time.Our products have been used in many panels with high refresh rates such as 360Hz.

In automotive display, it is needed to ensure automotive quality, reduce the number of signal and power wires, and provide long-distance wiring.We will meet these needs with a unique point-to-point interface that reduces wiring number and enables long-distance transmission, as well as an anomaly detection function to ensure automotive quality.

INT043BTFT and INT043BTFT-TS are embedded display driver boards based on our 4.3 inch 480 x 272 RGB resolution TFT display module. Mounted on the embedded board is the Solomon Systech SSD1961 LCD controller that supports common RAM-less LCD drivers and offers the following features and benefits:

INT028ATFT and INT028ATFT-TS are embedded display driver boards based on our 2.8 inch 240 x 320 RGB resolution TFT display module. Mounted on the embedded board is the RAIO RA8872 LCD controller that offers the following features and benefits:

There are other types of Tft lCD driver, such as amber tft stick driver, battery tft lcd driver, and strip sticks for battery tft drivers. In this type, the sticks are free of the battery and can be used into many other if as is the case. Moreover, the tft lcd driver vary in its aspects as it is powered and can be used with many others.

There are two types of Tft lCD driver for 12v and one such is the Tft LCD driver 12v. In this case, the Tft LCD driver for 12v is also called the Tft LCD driver from 12v to 24v. It is essential to know that a tft lCD driver is 12v or 24v. And in this case, a tft lcd driver with 12v power supply can be obtained.

The TFT display provides a semiconductor switch for each pixel and each pixel is directly controlled by pulse. Therefore, each node is relatively independent and can be continuously controlled, which not only improves the response speed of the display, but also can be accurately controlled. The color level is displayed to make the TFT LCD color more realistic, the brightness is good, the contrast is high, the layering is strong and the color is bright.

ER-TFTV043-3 is 480x272 dots 4.3" color tft lcd module display with vga,video,av signal driver board,optional 4-wire resistive touch panel with USB driver board and cable,optional capacitive touch panel with USB controller board and cable,optional remote control,superior display quality,wide view angle.It can be used in any embedded systems,car,industrial device,security and hand-held equipment which requires display in high quality and colorful video.

Breakout board with ST7789 driver IC. This display does not have a CS pin, so it can’t be used with other SPI devices at the same time. To use it with the Adafruit_7735/7789 library, init using SPI_MODE3

Breakout board. Not an actual ePaper display, though it looks like one. The image fades when you remove power, but it retains for a few second. The display rate is more like an LCD.