gateway fpd1775w tft lcd monitor factory

- OR - If your computer has a digital video connector (DVI), connect a white DVI video cable (available in the U.S. at www.gateway.com) to the white connector under the back of the display. Although a standard DVI cable is acceptable, we recommend using the right-angle cable (available in the U.S.

Place the hinge cover over the hinge. The hinge cover came with your optional stand. Attach the hinge cover using the screw you removed from the original neck hinge. Remove the four small screws from the back of the LCD panel. Do not discard the four screws.

Using Your Gateway Flat-panel Monitor Tighten the thumbscrew under the base with your fingers (or a flat screwdriver) to secure the neck into place. With the stand facing you, press the mounting bracket lever to the left and hold it, then remove the bracket from the stand.

OSD Menu Main menu Main Menu Auto Picture Geometry Advanced Reset Picture menu Picture Brightness Contrast Gamma Video Scaling Geometry menu Geometry H-Position V-Position Clock Phase OSD menus Description Auto—Automatically adjusts your monitor to its optimum settings. Picture—Opens the Picture menu, where you can adjust brightness, contrast, and gamma.