5 inch tft lcd in stock

ER-TFTM050-3 is 800x480 dots 5" color tft lcd module display with RA8875 controller board,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO,and ARM .It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.

It supports 8080 6800 8-bit,16-bit parallel,3-wire,4-wire,I2C serial spi interface. Built-in MicroSD card slot. It"s optional for 4-wire resistive touch panel (IC RA8875 built-in touch controller),capacitive touch panel with controller,font chip, flash chip and microsd card. We offer two types connection,one is pin header and the another is ZIF connector with flat cable.Mounting on board by default. There is no capacitive touch panel connection on the board of ER-TFTM050-3,its capacitive touch panel needs to be connected with your external board.Now we design another new board with capacitive touch connection named_ER-TFTM050A2-3.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for5" TFT capacitive touch shield with libraries,examples,schematic diagram for Arduino Due,Mega 2560 and Uno. For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and development kit at the bottom of this page.

Have your product stand out with the DT050ATFT display - our 5” TFT LCD module with full viewing angle. The full viewing angle feature allows the display contents of the LCD to be visible from practically any angle. It"s a cost-effective enhancement compared to using an IPS display. The 5" TFT has 800 x 480 RGB resolution and supports 24-bit parallel RGB input mode. The LCD uses two driver ICs to drive the display: a source driver with TCON (Ilitek ILI6122) and a gate driver (Ilitek ILI5960). It also is available with either a resistive touchscreen or capacitive touchscreen panel. This 5 inch LCD is an ideal option for a variety of digital devices including video or POS systems.

A wide variety of 5 inch tft lcd 800x480 options are available to you, You can also choose from original manufacturer, 5 inch tft lcd 800x480,As well as from tft, ips, and standard.

**********Best Quality Guranteed.*****5 inch resistive touch screen designed for Raspberry Pi 3 2 model B RPI 1 b + a +*****The LCD display is available for all standard HDMI devices while the touch function is only for Caspian and Ubuntu systems*****The full color display outputs up to 800 x 480 and features a resistive touch sensing capable of detecting 10 fingers*****When the 5 inch monitor works with RI it doesn't need any external power supply The power is supplied and can be touched by GPIO display by HDMI If it is powered by external power there will be no touch function and please use 5V2A power supply to power it*****Please contact us via email us@hotmail to get detailed instructions or check Q&A below to download it*****60 hertz

Now we have this 5-inch TFT display with a touch screen that can provide a high-resolution picture and a large viewing screen for your Raspberry Pi. The display supports any revision of Raspberry Pi and works perfectly for Raspberry Pi B+/ 2B/ 3B. It is the low power consumption for the backlight of the screen. The high 800 x 480 resolution can give you a full-color experience, the touch screen allows users to play easily.

This is a 5" Raspberry Pi LCD touchscreen with 800*480 resolution and 108×64.8mm display area. The product supports Raspberry Pi DSI display interface and comes with a capacitive touch panel on its screen and supports 5 touch points.

The Transmissive polarizer is best used for displays that run with the backlight on all the time. This polarizer provides the brightest backlight possible. If you have a need for a bright backlight with lower power drain, transmissive is a good choice for this TFT LCD display.

Focus LCDs can provide many accessories to go with your display. If you would like to source a connector, cable, test jig or other accessory preassembled to your LCD (or just included in the package), our team will make sure you get the items you need.Get in touch with a team member today to accessorize your display!

Focus Display Solutions (aka: Focus LCDs) offers the original purchaser who has purchased a product from the FocusLCDs.com a limited warranty that the product (including accessories in the product"s package) will be free from defects in material or workmanship.

If you"re looking for a powerful display module, you"ve come to the right place. This 5" display has extremely wide viewing angles, is sunlight-readable, and supports 5-point capacitive touch. Not only is the TFT display wonderful, it is powered by the BT817 EVE chip. The EVE chip enables exceptional graphics control, backlight control, touch sensing, and audio - all mapped as SPI devices making communications with this module a breeze.

This module replaces the CFAF800480E1-050SC-A1-1, per PCN #11076. The change is to the CFA10100 board, upgrading from the FT813 EVE chip to the BT817.

Looking for accessories for your EVE TFT display module? We have 2 sizes of FFC cables 6-inch 30-pin FFC cables and 12-inch 30-pin FFC cables, plus a EVE breakout board. Or get everything you need in the 5" EVE Development Kit.

Maclight 5 inch tft lcd display modules have 800x480, 480x272, 640x480 typical resolutions. TN TFT and IPS display modes are available. the interface can be RGB, MCU, LVDS, HDMI, mipi interfaces.

The 5 inch IPS TFT is free viewing angle tft and wide temperature tft, that its working temperature can be up to -30~80°C, one IC driver solution with cost competitive,40-pin RGB interface available,

We, Campus Component Private Limited, established in the year 2010 as one of the leading Manufacturer, Wholesaler, Distributor and Trader of a vast collection of Industrial Electronic component Products. Our company is well known for its fine range that comprises of Thermal Printer, Wireless Modules, Simcom GSM GPRS Module, Raspberry PI, Antenna, Zigbee Chip, XBee Module, SMA Connector, Wi-fi Module, Sim Card Holder, Banana Pi, LCD & LED. To provide supreme quality and operationally fluent products, In addition, we make sure that all the predefined industrial standards and norms are followed during the procurement process and post-procurement. In a very short span of time, we have managed to earn a large number of customers due to our efficient products.

At Campus Component, we are registered importer and distributor of electronic components. Backed by an efficient and experienced workforce, we are the preferred choice of our customers for meeting their exact requirements on time and providing them with customized solutions. Our wide range of product comprises of Friendly Arm9 Board, RFID Reader, Card, GSM Modems, GPS Receiver, Interfacing Boards, Bluetooth Module & Transceiver, Finger Print Module, Development Boards, Development Programmers, Voice Recording IC Card, Robotics Accessories, Servo Motor and other Motor, Sensor, Flex, Force Sensor, Arduino Shield, Module, XBee Module, SMA Connector, Wi-fi Module, Sim Card Holder, Banana Pi, LCD & LED, Antenna, Zigbee Chip and other products of the same dimensions.