wimaxit portable touch screen monitor factory

I haven"t tried other portable monitors yet, but usually people mention they temd to be a bit dimmer than optimal and the colors are just ok. I find that max brightness is sufficient and better than I was expecting. The colors out of the box where a bit washed out and in some games (Anthem) very dark and unpleasant in other games not as dark and fine. Once I discovered how to access the menu system (no manual included), I was able to fix this and very pleased with the colors.

On the left side there is a HDMI input towards the bottom. Obove the HDMI there is a USB-C port used for power, Data/Touch screen and video (if supported). At the top there is an additional USB-C port for power only. It does bring wall charger for power, but can be powered over USB as long as it supplies enough power.

My Surface go will power the display, support touch input and video over a single USB-c cable. My desktop will not output video over it"s USB-C so HDMI is also required. My small ITX build with an RTX 2080 Ti will work with a single cable though the 2080 Ti"s USB-C (Displaylink).

I ordered an USB-C extender cable and discovered that the order in which they are plugged in determines if touch is enabled. If I plug the extension cable into my PC then connect it the the supplied cable that is connected to the display touch does not seem to work. If I reverse that extension into the display and supplied USB-C to USB-C into the PC touch does work. Something to keep in mind if you want to use the touchscreen.

For my use, I"m pleased and it will do what I needed. It even exceeded my expectation with the screen quality, I was expecting it to be dimmer and more dull. Temper you expectation and you should be fine. A portable monitor isn"t going to be at the level of you standard desktop non-portable monitors.

Single Type-C is Needed: Only one USB-C port(the lower one close to HDMI port), Power& Touch& Video all delivered. USB-C 3.1 Gen 2 required for the mobile device..ATTENTION: Sometimes it also needs to connect the USB to Type-C power cable to provide enough power to the monitor and charge your Type-C device at the meantime. It can minimize additional dongles and clutter in the workplace

Great Visual Experience: 15.6 Inch IPS screen with 1920x1080 native resolution screen, 16:9 (4:3) aspect ratio, 250cd/m2 brightness, 800:1 Contrast Ratio. The monitor delivers a good visual experience

Compatible with Thunderblot 3 USB 3.1GEN2 Devices. Plug Id Play: Two Type-C ports, One power and the other one for Power&Touch&Video Save space and easy to use. Charging your phone when connecting the upper type-c to USB 3.0 cable to power supply, no worry about short battery life when playing games on the phone(phone model listed in descriptions)

Most of the big suppliers of screens have at least one in their portfolio and new versions emerge more frequently than ever. You can use these screens for plenty of purposes like you choose to install a second screen and give presentations and small audiences, display two full-screen programs at once.

Or you can expand your handheld game device or touch up your projects with a stylus, ready to support mobile displays of varying types, models and paradigms.

Many smaller laptop screens can be taken on the road while traveling but those clearly sold as such are the real portable displays. And those sizes range quite a bit from 3.5 inches to 22 inches.

For artists and gamers, portable displays run the gamut from private, business, and general-purpose versions to screens. Any size between 12 to 17 inches considered to be the sweet spot for use with a laptop.

That is why we have not only compiled a list of top 5 best USB-C portable monitors you can get in 2022 with their detailed reviews for your convenience. You can also explore intolaptop.com to find out more details for the best available laptops.

Many people adapt the screen size of their laptops to their portable screens. But there are also a handful of 7 inches for use with the Raspberry Pi 4 and 10 inches mostly for use with game consoles on the market.

Two aspects differentiate the Asus ZenScreen Touch (MB16AMT) from much of the general-purpose handheld display we’ve tested. First, it has a touch screen, a characteristic it shares with certain digital pen displays like the Cintiq 16 from Wacom.

The ZenScreen Touch is enclosed in a stunning, silver-gray shell and it measures 9 x 14.2 x 0.4 inches. At the heart is a Full HD 1920 x 1080 touch-sensitive, 15.6 inches IPS screen.

The display has the same size as the Asus ZenScreen MB16ACE, Asus ZenScreen Go MB16AC, AOC I1601FWUX, and Lepow 15.6 Inches USB-C Portable Display. All of which we reviewed or are in the process of reviewing.

Despite the difference in screen size and a native resolution of the laptop and ZenScreen as for all these panels, the ZenScreen Touch worked with our Dell XPS 13 with no obvious compatibility problems.

One of the fortunate few, the ZenScreen Touch is running at 240 nits, just outside of its 250 nits mark. The contrast ratio of 1,260:1 is way above its ranking of 700:1, due to its ability to render dark shadow regions.

The ZenScreen Touch filled 69.1 percent of the sRGB color space in our Normal mode color checking. So far as the color performance is concerned, the ZenScreen Touch did 72.7 percent of sRGB and the ZenScreen MB16ACE 69.8 percent similar to the Asus ZenScreen Go.

In general, our recommendation is that you look for at least 95% sRGB performance in mobile monitors. The only portable display which achieved 97 percent of sRGB during our testings lately is the Lenovo ThinkVision M14.

You need a portable display with a touch screen to try out the Asus ZenScreen Touch MB16AMT monitor. This model allows both gesture-based multi-contact with your fingertips and motion control with the supplied stylus eraser or pen.

It also has a built-in battery like the ZenScreen Go to allow you to use the Touch via an Android phone or to have enough power to operate the display even if the laptop’s battery runs low.

It makes ZenScreen Touch monitor one of the best options for a portable device in its 15.6 inches or larger size range. For a general-purpose handheld phone, the ASUS ZenScreen Touch is at the expensive edge.

But if you need the touch power and the extra energy the battery offers, it’s well worth the price. But the one organizational downside is the tendency to appear bland in certain shades, such as primarily red and purple.

One of the first things We have found since opening the package is how sleek and small this display is. The unit integrates a stylish textured black shell, covering the 15.6 inches IPS touchscreen panel.

The cover doubles as a stand for this handheld screen, too, articulately. The panel came fitted with cables including HDMI, USB-C to USB-A and USB-C to USB-C.

Having said that while using Windows 10 this monitor’s ten-point touch features are where this system stands out to us the most. We don’t have to change the way we work, which requires a mix of the trackpad, the keyboard and the touch when we were doing it.

Though it is not the brightest display since some other similarly priced monitors provide you more brightness level. Still, you can not say that this monitor is dim since the brightness level is decently good and will be sufficient for any kind of work or use.

This deficiency is especially troublesome since the device’s stability is very critical as a touch display. Sadly, without additional supports, the regular usage depending on the given stand or you can call it a cover could cause the device to fall.

This has a 4K screen and it also offers four times as many pixels as a 1080 resolution Full HD screen. Users link the Perfect portable monitor via USB or HDMI cables to a laptop, phone, or game console.

For these three modes, they will use the device repeat, expand and just second-screen. Because of its user-friendly nature, it is often used as the best portable display.

Let us make it better and easier. The 4k monitors are great for you whether you play the game on a gaming laptop or consoles like Nintendo Switch and Xbox. With these, you should get the latest gaming monitor like this one that can handle 4K graphics.

Prechen Monitor gives you native resolution visuals with outstanding color reproduction from Full HD 1920 x 1080p screen. The IPS panel gives you a clear image and a fantastic viewing experience.

It is another on the list of the best compact laptop displays. It comes with a screen measuring 15.6 inches, with resolutions measuring 1920 x 1080. The monitor depicts IPS technology.

Prechen Portable Laptop Screen supports 170 ° viewing angles and 60Hz refresh rate. The native monitor pixels will provide a crystal clear image with 1080 PPI settings.

Prechen Portable monitor Support Extinct or Print screen, the HDMI lightweight display can be conveniently attached to the device by plugging the HDMI cord as well.

UPERFECT Monitor comes with high-resolution Full HD 1920 x 1080p screen, returning true color by 72%. NTSC offers the best color analysis & correct color restoration for the HD display.

It provides you 178 ° viewing angles from the imported IPS brand screen. Away from the lower second-hand screen, suitable for video viewing in a small space with several individuals.

It is not limited to just a single landscape view, UPERFECT monitor can vertically search web pages or images. To change the screen to Expand View, you can give the specific commands and select the orientation.

You can use single-pen standing to go into preferred landscape or portrait mode to improve usability. The screen is bright enough and shows sharp, vivid colors especially when you watch Full HD videos, pictures or play graphic-intensive games.

Unique practical port configuration compatible for all HDMI products, great use for Macbook, surface screen. Type-C attaches the cell phone that supports PD protocol and switches, plug and play.

SideTrak Portable Monitor offers 12.5 inches Full HD 1080P IPS screen. This portable monitor filled 69.4 percent of the sRGB color space in our color-gamut tests, a very close result to both the Asus ZenScreen MB16ACE 69.7 percent and the ZenScreen Touch 69.1 percent.

just a little bit short of the Asus ZenScreen Go 72 percent. This is smaller than the displays we’ve tested on other general-purpose handheld monitors. But when combined with business and general-purpose laptops the size should be a good match.

Its native resolution is representative of today’s laptop-friendly portable displays and is the same as that used in the ThinkVision M14 and EliteDisplay S14, the Asus ZenScreen Go, monitors.

Here you have our list of top 5 best Touch USB-C Portable Monitors to use with finger or stylus you can get. Almost all of the portable displays do not require any program to operate since they are plug and play.

Find out the top best portable secondary touch screen monitors that we have reviewed above. You can also explore intolaptop.com to find out even more options and we have also crafted a Laptop Buying Guide that can help you in choosing the best portable monitor display size for yourself.

Long before switching to the Surface Pro 2017 with its 12.3-inch display, I used a 17-inch HP laptop. Though I"ve always missed the extra inches I sacrificed, the portability convenience of the powerful yet compact Surface Pro more-or-less balanced the scales. I use the Surface Pro to run my business Ward Advocacy, LLC and for writing content for Windows Central. I do both on the go or when at a desk, and often need more screen than the Surfaces" 12.3-inches comfortably provides.

When set up at home, my Surface Pro is sometimes connected to my 27-inch Dell monitor to provide extra space for multiple Windows, video, and more. When on the go, I"ve been giving WIMAXIT"s 15.6-inch portable touch monitor (sent to me for review) a spin to do the same. The experience has been great and has genuinely improved my workflow. Still, anyone planning to spend $259 on this monitor must weigh the benefits of extra touchscreen real-estate against their personal workflow needs. There are also a few cons inherent to this device to consider as well as genuine concerns related to how packing an extra device may impact one"s mobile needs.

One of the first things I noticed after opening the box is just how thin and sleek this monitor is. A convenient textured black cover is built into the device and protects the 15.6-inch IPS touchscreen display. The display is surrounded by thin bezels, except for the thicker lower bezel which also bears the WIMAXIT name. On the right of the monitor are two mini-HDMI and two USB Type-C ports and a 3.5mm headphone jack. On the left side, you"ll find the input, menu, volume up and down and power buttons as well as a micro USB port.

This display is very thin and slips easily into my backpack along with my Surface Pro and some other stuff my wife says I don"t need to carry around. This is important for a device that is all about mobility. I"m a Windows 10 user, but this monitor also works with iPad, Android phones, MacBook and even the Nintendo Switch. Still, as a Windows 10 user touch is a big part of how I use my PC.

The ten-point touch capabilities of this monitor are where this device shines for me when using Windows 10. I don"t have to adjust how I work, which involves a combination of the trackpad (mouse), keyboard, and touch while I"m using this display. I often have to resist reaching out to touch my larger (non-touch) Dell monitor when I"m using that connected to my Surface. When using the WIMAXIT touch monitor, I can reach out and touch the display as a fluid extension to my touch-enabled Surface Pro (except for not being able to use the Surface Pen on the display). The touch capabilities of this monitor are wasted when used with devices like a Macbook that don"t support touch.

My biggest complaint about this monitor is how the company poorly executed a great idea to use the built-in cover to double as a stand. To say that the stand is flimsy would be an understatement. I plan to invest in a small stand for the monitor, but during my review I"ve had to place objects around its base as crude workarounds to keep it from falling. This shortcoming is particularly problematic because as a touch monitor, the stability of the device is very important. Sadly, without additional supports, normal usage relying on the provided insufficient "cover/stand" could cause the device to fall.

One unique headache anyone with a Surface Pro or a device without USB Type-C or an HDMI port is that you will not be able to use the device right out of the box with the provided cables. The Surface Pro"s Mini Display Port needs to connect to one of the mini HDMI ports on the monitor. I had to purchase a Mini Display to HDMI cable(opens in new tab) and an HDMI to Mini HDMI adapter(opens in new tab) to get things working. Also to take advantage of the touch capabilities, you"ll need to use a USB Type-A cable from the device to the USB Type C (not the one for power) on the monitor.

Yes, you should buy WIMAXIT"s 15.6-inch HDR Touchscreen Monitor if an additional touch display will add value to your mobile workflow. This monitor is sleek, relatively lightweight, durable, and easy to slip into a backpack. $259 is a great value for a 15.6-inch mobile HDR display which also has touch capabilities.

The WIMAXIT 15.6-inch HDR Touchscreen Monitor provides coveted additional screen real estate for mobile users on a nice HDR touch display at a reasonable price.

WIMAXIT"s 15.6-inch HDR Touchscreen Monitor offers mobile users valuable additional screen real estate and a touchscreen experience on a nice HDR IPS display while on the go. The sleek display is thin and can be packed into a bag alongside a laptop, tablet, or 2-in-1. A built-in cover protects the touchscreen display when not in use. This same cover doubles as a weak stand, however, that will require the user to purchase an additional accessory to keep the display from falling. Users with laptops or devices without an HDMI or USB-C ports, like the Surface Pro, should be aware that additional accessories like an HDMI to Mini HDMI adapter will be needed. Overall, this $259 touch monitor is an asset to the workflow of any road warrior who values additional screen space and incorporates touch into their workflow.

The WIMAXIT touch screen monitor is mobile and can be used as a second monitor for a laptop or even a smartphone. A gaming console can also be connected. We’ve tried all the features: You can read what we think of the monitor here.

Why a portable monitor at all? Anyone who uses a computer a lot at home or at work has long appreciated a second monitor. In some situations I would like to see a third display if, in addition to the text field in which I write and several open browser tabs on the second screen, the chat program also flashes or if I would like to display a video/video call.

A portable monitor makes the comfort of a second display on the go possible. Not only does it simply become an extended display for the laptop; a suitable smartphone can also be connected. Since it’s a touch screen, you can even operate the phone completely via the large screen, turning it into a tablet. This all sounds very good and also explains the price of around $300. But how good is the monitor really? We have the test.

But they made quite a mistake with the mains plug that they enclosed with the cables. This adapter with USB-A connector looks normal at first sight; but you’ll notice something wrong when you touch it for the first time. The adapter is remarkably light and the plastic feels hollow and cheap (and smells really unpleasant). At the bottom you can see clear gaps in the fairing. The Quick Charge logo looks like a fake, and on the back there is a pitifully bad imitation of a CE mark.

If you haven’t been deterred by the small flaws so far, you can now look forward to the highlights of the device. Because I really like the display itself. Format (16:9) and resolution (1080p) are fully ok, in addition the display has a very high adjustable brightness. The reflection is negligible at high screen brightness (even if you can shave in front of it when the display is switched off). Outside in direct sunlight you won’t see much.

Added to this is the touch function, which not every USB-C monitor has. This is also true for multipoint inputs and makes the Windows surface of the laptop operable by touch.

You can also connect a console to the screen. This can either be done classically via HDMI or, in the case of the Nintendo Switch, via USB-C. In any case, an external power source is needed, since the switch, unlike a notebook, doesn’t have enough power to power the monitor. Nevertheless: Monitor attached to the power bank and the switch simply attached to the monitor via USB-C cable, you can get started.

The picture is shown in 1080p (the display of the switch itself can only 720p) as well as on a TV screen. If you take the monitor with you, which is easily possible in almost any backpack, you have the possibility to play a round of Mario Kart on the road or anywhere else – on a Full HD monitor and optionally also in splitscreen. A real upgrade for the console.

The touch function of the monitor can also be used with the smartphone, and the duplicated Android surface can be operated in parallel on the mobile phone or the large screen. On the one hand, the large display is more pleasant to read, on the other hand it is easier to write on, whereby in this case one would like to use a keyboard in addition.

There is also a 13.3 inch display for $138 from the same manufacturer. Even cheaper is the 11.6 inch version for $118.99, which has no touchscreen and only a micro-USB port.

A direct comparison with other models is difficult, as almost no model has the same features. The ASUS ZenScreen, for instance, is similar in size, but is not a touch screen and has no HDMI connection. That’s why this monitor costs less.

The display itself convinces in terms of resolution, brightness and response time. In addition, it’s a touch screen that can be used with Windows and Android. The display does not require a power cord, but can be used with a laptop or smartphone directly with just one cable. This works because the display actually consumes very little power. As a second monitor for the laptop or for gaming on the go a great option. To the gadget

When I opened the box and plugged it in the computer the windows 10 pc instantly gained touch pad abilities which is good. But it reads that my old 2 monitors are the only monitors so it thinks one of those two must be the touchpad and doesn"t even list the actual touch device as a visual. This is despite having it connected both with USB and HDMI (resulting in two mouse hid.)

In other words, instead of being listed as a monitor the WIMAXIT device is listed connected as just a simple hid compliant mouse device. The device interacts with my touching it, but it is basically useless with the picture being a complete black screen.

When I try changing my display settings it will not detect or identify a new monitor. When I try to calibrate my touch tablet and touch pad it tells me to click the screen or press enter but only gives choices of the two old monitors. Clicking on random places on the black screen of the WIMAXIT acts like a mouse click / touch pad like it should but it registers it as if I was clicking on one of those other monitors. I just can"t get the actual device to show video at all.

When I go to Device Manager I see the new device listed under Mice section as a generic touch hid, and my other two monitors are the only two listed in the display devices section.

All of the windows troubleshooting, youtube videos, answers, and tech forums about touchpads seems to be about issues slightly different than the one I am experiencing. Anyone know how to fix this so I can actually use this $200 touch screen correctly?

Have you been slapped with a "No Signal" screen on plugging in your portable monitor to your laptop? It doesn"t necessarily mean you bought a faulty monitor. Let"s make it clear; don"t confuse "no response" with a "No Signal" problem.

Portable monitors are excellent as they make it easier to multitask when you have a lot to do with limited time. Besides, they let you carry them anywhere so you can continue with your work. If you recently encountered a challenge connecting your monitor to a device, understanding how they work can help you troubleshoot the problem faster.

Today"s portable monitors come with various ports, each serving a different function. With the right monitor, you can enjoy an incredibly smooth media streaming experience, whether listening to music, watching videos, or playing games. Most modern portable monitors transmit video and audio signals through DisplayPort, HDMI, or USB-C.

While most of us assume that there is only a single HDMI cable type, that"s far from the truth. There exist four types of HDMI cables. But the most commonly found on portable monitors is the HDMI Standard, often shared in displays with resolutions of up to 1080p.

Higher-resolution portable monitors like the 4K use HDMI High Speed. This HDMI type is regarded as a fast transmitting connection, capable of handling transmission speeds of up to 10.2Gbps.

The next on the list is the HDMI Premium High Speed, which is commonly used for HDR-enabled portable monitors. You"ll find this HDMI on Lenovo ThinkVision M14 and UPERFECT S devices, released in 2020.

Besides standard, there are also three different HDMI shapes: HDMI standard port, mini HDMI port, and micro HDMI port. The mini HDMI port is the most commonly used in portable monitors due to its slim design.

At the moment, there exist three types of DisplayPort. DisplayPort 1.2 is the entry-level and can support display resolutions from 3840p or 4K and a refresh rate of 60Hz. Most portative monitors will have this type of DP in a smaller size, called mini DisplayPort or mini DP.

DisplayPort 1.3 is often used for transmitting 8K video resolution transmitted at a refresh rate of 30Hz. A portable screen with an 8K resolution, 60Hz refresh rate, and HDR support will often have DisplayPort 1.4. It"s the fastest and can support the highest graphic setting requirements, such as when playing high-quality modern games.

USB Type C, often named USB-C or Type-C, is one of the best things that ever happened to the world of data transmission. That"s because it"s capable of transmitting high-speed data and power simultaneously when it comes to USB 3.1 or later, also called full function/feature Type-C. Most modern portable monitors will have at least two USB-C ports in place of DisplayPort and HDMI.

USB-C is known for its great versatility as it is reversible; you can plug it in any direction and still work. Due to this great advantage, USB-C ports make it easier to use portable monitors with your laptop, tablet, smart phone, and gaming console.

Now that we"ve familiarized ourselves with how portable monitors receive data from input devices, let"s jump to how to connect your portable monitor to your laptop.

Sometimes the "No Signal" issue could be due to an improper connection of an external monitor to your device. Even though portable monitors can connect to devices other than laptops, we"ll use the latter as a standard. Once you get the hang of it, you"ll be able to connect it to any other device.

Most current portable monitors often include the USB-C to USB-C cable. Connect it to the correct Type-C port on the monitor because sometimes there is a Type-C port for power only, marked as a PD port.

If your laptop has no Thunder Bolt or USB-C port, you can transmit video signals using a mini-HDMI, HDMI, or a DisplayPort, depending on what ports the second portable screen has. Remember to power with a wall socket outlet if your portable display does not has an in-built battery.

Before we jump into the deep troubleshooting bit, the problem of a mobile monitor having no response could be a matter of power input. Checking whether your monitor is receiving power should be your first action. Thankfully, it"s pretty simple to check when dealing with portable screens.

As we mentioned before, portable monitors connect to devices through USB Type C, HDMI, and other ports. If connecting to a laptop using USB-C with one cable, ensure that you have a Thunderbolt 3 or above, or USB-C 3.1 or later.

Many users are using the second external screen with computers and PCs. If the device is not yet upgraded to an HDMI port for video output, they need to convert VGA or DVI to HDMI. If that"s the case, ensure your adapter can support VGA to HDMI compatibility because some adapters offer only one-way connectivity, HDMI to VGA.

You may also face the "No Signal" message when trying to connect your portable screen display to a Nintendo Switch console via a USB-C to USB-C cable. In such a case, ensure the monitor is powered via the Switch charger rather than the monitor"s charger. If you want a more stable connection, you may use the HDMI port of the Switch dock.

Another cause of low power supply can also be the higher power requirement. Laptop external monitors with high resolutions such as 4K or wider sizes like 17.3 inches will require more power input than what a device can give.

Usually, 1080p portable monitors require 5V 2A power input when connected to a laptop. You can choose a Power Delivery (PD) power bank to supply the required power rating using a smartphone. For a 4K resolution monitor, you"ll have to connect it to a PD power bank to get the minimum requirement to support performance.

Computer monitors out-of-the-box may or may not have the appropriate settings to support plug and play. The most likely cause is that the auto-search functionality is not turned on, and the monitor may need to be directed to the source of the input signal.

Thanks to the portable display technology, the Autosearch setting is build-in the monitor, and it will refresh and connect using your new connection medium. Should this bear no result, select the appropriate setting, either HDMI, MiniDisplay, or VGA, from the input source screen, and your monitor should light up.

Sometimes, the wrong settings could be on your laptop. If you had previously connected to a second screen and did exit with the Show Desktop Only on 1 or 2, you will also get the "No signal" message. Check your laptop and change the display setting to Duplicate or Extend these Displays.

Sometimes, the issue could be with your connection cables. After prolonged use, a cable may become loose when connecting to a USB port. You can try fumbling it while still connected to the port to see if your screen will light up.

If that doesn"t work, the next thing is to try and test the cables. Test the USB-C and HDMI cables on different laptops and portable monitors. If all fail, you might want to replace them. Alternatively, you may use an android app known asUSBCheckto determine if a USB-C cable is working or not.

Monitors Screens for Laptop are the easiest way to multitask to get many things done in a fraction of time. While these monitors are ideal for use both outdoors and indoors, it can sometimes be troublesome to get them to work with your device, especially if it"s your first time using one.

For starters, most portable monitors can start right out of the box without doing any configurations as long as the connections are made right. If you can"t get your second monitor to work, first check to ensure that the display is receiving power. This is applicable primarily if the monitor has no response or a black screen.

Product Description Wimaxit 14 inch 1080P Touchscreen High brightness SRGB portable USB-Cmonitor Specifications: Screen size:14" IPS 98% sRGB color gamutResolution:Full HD 1920x1080 pixelsAspect Ratio:16:9Brightness:400cd/m2Contrast:1500:1Viewing Angle:85°/85°(L/R)85°/85(U/D)input Signal:Mini HDMI/USB Type-C 3.1Gen2 Alt ModePower:USB Type-CAudio:3.5mm Stereo Headphone/speaker*2x 1wOTG: USB Type-C for mouse or keyboardPower CONSUMPTION: = 10winput Voltage: USB DC 5~20VUnit Size:321*191*9mmUnit Weight:655g (only monitor)/1022g(with smart cover) High quality screen display OneCable USB C data transfer with your laptop, Great working external screen Both USB C Ports can transfer Data and power Charging, With the USB-C and One-Cable Function (Requires At least USB3.2 Gen2=10Gb/s transfer Speed or USB C with DP function), you can Easily attach 1 or 2 extra monitors to your laptop, double down on your productivity, you can use touch function Via one cable Function (require your device support) Or HDMI+USB C.for those with full-featured Type-C port Computers, you need to use mini HDMI + Type Cto use whole functionNote:1:please make sure your input setting"s Type C port is the one you use to connect the monitor2:some Microsoft"s Surface Pro Devices may not use with this Monitor for some Protocol reason3:Mac os devices cannot use touch funciton One USB C cable connect with your Cellphone external big screen foryour phone USB3.2 Gen2(10Gb/s) Transfer Speed Cellphone Support This Display Supportfor Galaxy S8/8+/9/9+S10/20/20+/20 Ultra, note8 note9/10/20/20 Ultra, with DEX mode

and more Type-C Cellphone Support is comingNote: Better to connect the outer Power source, in case your cellphone"s battery die quick.please make sure your input setting"s Type C port is the one you use to connect the monitor Or it won"t be able to use touch function Extension display for gaming devides with Mini HDMI & USB C ,makes this portable monitor more convenient to connect your gaming devices,also, an ideal external screen for playing games at homeyouself or with your friendsgives you a better visual experience Things you Must Know Right Type-C connection for touch/data make sure the type-C port you connect to is the same as the setting optionRight connection belowSetting Type-C1 --- Monitor Type-C1Setting Type-C2 --- Monitor Type-C2Then you can use the touch function without connection problem Touch not for Mac OS this monitor can connect with Mac OS device, but only data transport, no touch function(some Newest Version of MBP may use the touch function) Make sure enough power supply Make sure the monitor has enough power supply to work normally or it may cause some problems as below:cannot power on the monitorvolume up to the highest, the monitor will turn offBrightness up to the highest,the monitor will turn offYou can use wall charge or Power bank as external power supply (suggest use at least 10W supply)Read more

Knowing the external monitor like this usually aren"t very bright and colors temd to be a bit washed out, this display surpassed my expectations.Display:I haven"t tried other portable monitors yet, but usually people mention they temd to be a bit dimmer than optimal and the colors are just ok. I find that max brightness is sufficient and better than I was expecting. The colors out of the box where a bit washed out and in some games (Anthem) very dark and unpleasant in other games not as dark and fine. Once I discovered how to access the menu system (no manual included), I was able to fix this and very pleased with the colors.How to access the: There is a control wheel on the right hand side a single press bring up a green cross-hair in the center of the panel. A long press brings up the menu/settings OSD. I set color effect was set to photo which is where I left it. Games, movie where among the options but games had very dull colors. It might offer some advantages for gaming, but I didn"t really notice so set it back to photo. Temperature was set 7600k and there where several other option including sRGB. I set it to sRGB.I haven"t noticed a input lag or ghosting, but that may depend on what your used to, I"m not really sure.In the end after playing with the settings it looks better and I"m happy with the results.Inputs:On the left side there is a HDMI input towards the bottom. Obove the HDMI there is a USB-C port used for power, Data/Touch screen and video (if supported). At the top there is an additional USB-C port for power only. It does bring wall charger for power, but can be powered over USB as long as it supplies enough power.My Surface go will power the display, support touch input and video over a single USB-c cable. My desktop will not output video over it"s USB-C so HDMI is also required. My small ITX build with an RTX 2080 Ti will work with a single cable though the 2080 Ti"s USB-C (Displaylink). UPDATE: just tried again the the Surface Go not connect and disconnects from the display making it unusable with out additional power via the power USB-C port.I have to plug in the Surface Go first, then when it struggles to connect plug in the external power. My surface go recently received a firmware update and a Windows update, im not sure if one or both of those is the reason I"m having issues now that I didn"t have at first. Updating Windows on my Surface Go right now to see if that helps. SADELY most recent update didn"t help, it still behaving as if it not getting enough power supplied vis the Surface Go"s USB-C port. ;(So if you USB-C port dosen"t support DP the HDMI cable will be needed, not a big deal to me.As long as I connect it with the center USB-C input touch works with all my devices, including my Note 9 in phone and Dex mode.I ordered an USB-C extender cable and discovered that the order in which they are plugged in determines if touch is enabled. If I plug the extension cable into my PC then connect it the the supplied cable that is connected to the display touch does not seem to work. If I reverse that extension into the display and supplied USB-C to USB-C into the PC touch does work. Something to keep in mind if you want to use the touchscreen.One very odd issues is with Fortnite. For some reason Fortnite seems to crash at the start while on the bus when connected to this display on my of my computers, but not the other. It happens to be Small ITX build I intend to use this display with most, but mainly for portable VR not Fortnite so It may not be a problem as long as it the only game that does this. As it works with my desktop I don"t think it an issue with the display, just with my one system and video card.If you need an additional monitor for professional Photo or video work this is probably not for you, you probably need a professional quality monitor with a greater color gamut. If you are doing standard computer work or amateur photo/video this might work fine. Gaming is OK too, of course highly compatitive gamers would want something better with a high refresh rate.For my use, I"m pleased and it will do what I needed. It even exceeded my expectation with the screen quality, I was expecting it to be dimmer and more dull. Temper you expectation and you should be fine. A portable monitor isn"t going to be at the level of you standard desktop non-portable monitors.