retina display vs tft lcd factory

Before you get a new monition for your organization, comparing the TFT display vs IPS display is something that you should do. You would want to buy the monitor which is the most advanced in technology. Therefore, understanding which technology is good for your organization is a must. click to view the 7 Best Types Of Display Screens Technology.

Technology is changing and becoming advanced day by day. Therefore, when you are looking to get a new monitor for your organization, LCD advantages, and disadvantage,  you have to be aware of the pros and cons of that monitor. Moreover, you need to understand the type of monitor you are looking to buy.

That is why it is important to break it down and discuss point by point so that you can understand it in a layman’s language devoid of any technical jargon. Therefore, in this very article, let’s discuss what exactly TFT LCDs and IPS LCDs are, and what are their differences? You will also find out about their pros and cons for your organization.

The word TFT means Thin-Film-Translator. Click to view: what is TFT LCD,  It is the technology that is used in LCD or Liquid Crystal Display. Here you should know that this type of LCD is also categorically referred to as active-matrix LCDs. It tells that these LCDs can hold back some pixels while using other pixels. So, the LCD will be using a very minimum amount of energy to function. TFT LCDs have capacitors and transistors. These are the two elements that play a key part in ensuring that the display monitor functions by using a very small amount of energy without running out of operation.

Now, it is time to take a look at its features that are tailored to improve the experience of the monitor users significantly. Here are some of the features of the TFT monitor;

The display range covers the application range of all displays from 1 inch to 40 inches as well as the large projection plane and is a full-size display terminal.

Display quality from the simplest monochrome character graphics to high resolution, high color fidelity, high brightness, high contrast, the high response speed of a variety of specifications of the video display models.

No radiation, no scintillation, no harm to the user’s health. In particular, the emergence of TFT LCD electronic books and periodicals will bring humans into the era of a paperless office and paperless printing, triggering a revolution in the civilized way of human learning, dissemination, and recording.

It can be normally used in the temperature range from -20℃ to +50℃, and the temperature-hardened TFT LCD can operate at low temperatures up to -80 ℃. It can not only be used as a mobile terminal display, or desktop terminal display but also can be used as a large screen projection TV, which is a full-size video display terminal with excellent performance.

The manufacturing technology has a high degree of automation and good characteristics of large-scale industrial production. TFT LCD industry technology is mature, a mass production rate of more than 90%.

TFT LCD screen from the beginning of the use of flat glass plate, its display effect is flat right angles, let a person have a refreshing feeling. And LCDs are easier to achieve high resolution on small screens.

The word IPS refers to In-Plane-Switching which is a technology used to improve the viewing experience of the usual TFT displays. You can say that the IPS display is a more advanced version of the traditional TFT LCD module. However, the features of IPS displays are much more advanced and their applications are very much widespread. You should also know that the basic structure of the IPS LCD is the same as TFT LCD if you compare TFT LCD vs IPS.

As you already know, TFT displays do have a very quick response time which is a plus point for it. But, that does not mean IPS displays a lack of response time. In fact, the response time of an IPS LCD is much more consistent, stable, and quick than the TFT display that everyone used to use in the past. However, you will not be able to gauge the difference apparently by watching TFT and IPS displays separately. But, once you watch the screen side-by-side, the difference will become quite clear to you.

The main drawback of the TFT displays as figured above is the narrow-angle viewing experience. The monitor you buy for your organization should give you an experience of wide-angle viewing. It is very much true if you have to use the screen by staying in motion.

So, as IPS displays are an improved version of TFT displays the viewing angle of IPS LCDs is very much wide. It is a plus point in favor of IPS LCDs when you compare TFT vs IPS. With a TFT screen, you cannot watch an image from various angles without encountering halo effects, blurriness, or grayscale that will cause problems for your viewing.

It is one of the major and remarkable differences between IPS and TFT displays. So, if you don’t want to comprise on the viewing angles and want to have the best experience of viewing the screen from wide angles, the IPS display is what you want. The main reason for such a versatile and wonderful viewing angle of IPS display is the screen configuration which is widely set.

Now, when you want to achieve wide-angle viewing with your display screen, you need to make sure it has a faster level of frequency transmittance. It is where IPS displays overtake TFT displays easily in the comparison because the IPS displays have a much faster and speedier transmittance of frequencies than the TFT displays.

Now the transmittance difference between TFT displays and IPS displays would be around 1ms vs. 25ms. Now, you might think that the difference in milliseconds should not create much of a difference as far as the viewing experience is concerned. Yes, this difference cannot be gauged with a naked eye and you will find it difficult to decipher the difference.

However, when you view and an IPS display from a side-by-side angle and a TFT display from a similar angle, the difference will be quite evident in front of you. That is why those who want to avoid lagging in the screen during information sharing at a high speed; generally go for IPS displays. So, if you are someone who is looking to perform advanced applications on the monitor and want to have a wider viewing angle, then an IPS display is the perfect choice for you.

As you know, the basic structure of the IPS display and TFT displays are the same. So, it is quite obvious that an IPS display would use the same basic colors to create various shades with the pixels. However, there is a big difference with the way a TFT display would produce the colors and shade to an IPS display.

The major difference is in the way pixels get placed and the way they operate with electrodes. If you take the perspective of the TFT display, its pixels function perpendicularly once the pixels get activated with the help of the electrodes. It does help in creating sharp images.

But the images that IPS displays create are much more pristine and original than that of the TFT screen. IPS displays do this by making the pixels function in a parallel way. Because of such placing, the pixels can reflect light in a better way, and because of that, you get a better image within the display.

As the display screen made with IPS technology is mostly wide-set, it ensures that the aspect ratio of the screen would be wider. This ensures better visibility and a more realistic viewing experience with a stable effect.

As you already know the features of both TFT and IPS displays, it would be easier for you to understand the difference between the two screen-types. Now, let’s divide the matters into three sections and try to understand the basic differences so that you understand the two technologies in a compressive way. So, here are the difference between an IPS display and a TFT display;

Now, before starting the comparison, it is quite fair to say that both IPS and TFT displays have a wonderful and clear color display. You just cannot say that any of these two displays lag significantly when it comes to color clarity.

However, when it comes to choosing the better display on the parameter of clarity of color, then it has to be the IPS display. The reason why IPS displays tend to have better clarity of color than TFT displays is a better crystal oriental arrangement which is an important part.

That is why when you compare the IPS LCD with TFT LCD for the clarity of color, IPS LCD will get the nod because of the better and advanced technology and structure.

IPS displays have a wider aspect ratio because of the wide-set configuration. That is why it will give you a better wide-angle view when it comes to comparison between IPS and TFT displays. After a certain angle, with a TFT display, the colors will start to get a bit distorted.

But, this distortion of color is very much limited in an IPS display and you may see it very seldom after a much wider angle than the TFT displays. That is why for wide-angle viewing, TFT displays will be more preferable.

When you are comparing TFT LCD vs. IPS, energy consumption also becomes an important part of that comparison. Now, IPS technology is a much advanced technology than TFT technology. So, it is quite obvious that IPS takes a bit more energy to function than TFT.

Also, when you are using an IPS monitor, the screen will be much larger. So, as there is a need for much more energy for the IPS display to function, the battery of the device will drain faster. Furthermore, IPS panels cost way more than TFT display panels.

1. The best thing about TFT technology is it uses much less energy to function when it is used from a bigger screen. It ensures that the cost of electricity is reduced which is a wonderful plus point.

2. When it comes to visibility, the TFT technology enhances your experience wonderfully. It creates sharp images that will have no problems for older and tired eyes.

1. One of the major problems of TFT technology is that it fails to create a wider angle of view. As a result, after a certain angle, the images in a TFT screen will distort marring the overall experience of the user.

Although IPS screen technology is very good, it is still a technology based on TFT, the essence of the TFT screen. Whatever the strength of the IPS, it is a TFT-based derivative.

Finally, as you now have a proper understanding of the TFT displays vs IPS displays, it is now easier for you when it comes to choose one for your organization. Technology is advancing at a rapid pace. You should not be surprised if you see more advanced display screens in the near future. However, so far, TFT vs IPS are the two technologies that are marching ahead when it comes to making display screens.

STONE provides a full range of 3.5 inches to 15.1 inches of small and medium-size standard quasi TFT LCD module, LCD display, TFT display module, display industry, industrial LCD screen, under the sunlight visually highlight TFT LCD display, industrial custom TFT screen, TFT LCD screen-wide temperature, industrial TFT LCD screen, touch screen industry. The LCD module is very suitable for industrial control equipment, medical instruments, POS system, electronic consumer products, vehicles, and other products.

Several display types are currently used in smartphones, and the most popular touchscreen displays are LCD, TFT, IPS, OLED, AMOLED, Super AMOLED and Retina.

Touchscreen LCDs fall into two categories: resistive or capacitive. Resistive touchscreens react to pressure from a finger, fingernail, stylus or other hard objects. The lack of multi-touch functionality, however, has limited resistive displays mostly to lower-end devices. Capacitive touchscreens, meanwhile, support multi-touch and are designed to react to the touch of a bare finger. This technology can be found in most mid-range to high-end smartphone and tablet displays, and users generally appreciate the smooth swiping motions and intuitive interface.

Thin Film Transistor, aka TFT LCD displays are superior to previous LCDs, delivering higher resolution and better image quality. On the other hand, TFT displays deliver poor visibility in bright light and have narrow viewing angles. This technology is typically found in budget phones or low-end smartphones.

In Plane Switching, aka IPS LCD technology delivers better viewing angles compared with TFT, while also drawing less power to allow for more battery efficiency. IPS displays typically cost more to make, however, and that"s why they"re typically used in higher-quality smartphones that come with a price to match. On the plus side, IPS is the most advanced type of LCD display tech and delivers notably wider viewing angles, extremely accurate color reproduction.

Organic Light-Emitting Diode, aka OLED displays involve a carbon-based material placed in between two conductive sheets, with class plates encasings at the top and bottom. OLED display technology delivers accurate colors, good viewing angles and a rapid response, while also allowing for lightweight and compact designs.

AMOLED, meanwhile, stands for Active-Matrix Organic Light-Emitting Diode. AMOLED and Super AMOLED technology is more expensive and is used only in high-end flagships, offering a number of benefits. This display technology delivers bright and vivid colors, great battery efficiency and wide viewing angles, while also allowing for lighter displays.

LCD and AMOLED are the most commonly used display types in current smartphones and tablets. LCDs are backlit, battery efficient, very bright, and extremely precise in displaying the entire color spectrum, which contributed to its wide popularity. AMOLED, however, eliminates the need for backlighting because each sub-pixel creates its own light. Compared to LCD, AMOLED may at times deliver less accurate colors and less visibility in direct sunlight.

Retina displays are also well-known on the market, partly because Apple is behind this technology. Apple developed and deployed Retina displays in a number of its devices, using this technology in conjunction with capacitive touchscreens. Retina displays have stirred lots of waves over the past few years due to their sharp resolution, clear and bright colors, and great accuracy.

Lastly, haptic touchscreens have their place as well on the display market. Nokia and BlackBerry have used haptic technology for some of their enterprise-oriented touchscreen smartphones and generally received positive reviews. Haptic technology basically provides tactile feedback on touch, thus confirming that it registered the touch input. Based on reviews, haptic technology can notably improve user performance and accuracy when typing on a touchscreen.

In addition to the various types of display technology, many smartphones also use Gorilla Glass protection to increase their durability. Gorilla Glass is a tough, protective glass sheet that"s highly resistant to damage. Used on many smartphones from Samsung, Motorola, Nokia and others, Gorilla Glass can provide good protection against scratches, bumps and drops, thus increasing the device"s durability.

Knowing the different types of display technology available can help users make an informed decision when purchasing a smartphone, choosing the one that best suits their needs, budgets and preferences.

It can be argued that the display on your smartphone is its most important feature, as it is the principle way in which you interact with your device. A poor display means a poor user experience. As with all tech, it is easy to spot an under-performer, however the differences between a good display and a truly excellent display are harder to discern.

Roughly speaking there are two main types of displays used in smartphones: LCD and LED. These two base technologies have been refined and tweaked to give us AMOLED and IPS LCD. The former stands for Active Matrix Organic Light-Emitting Diode, while the latter means In-Plane Switching Liquid Crystal Display.

All of this hasn’t gone unnoticed by the marketing people, which means that plain old AMOLED or regular IPS LCD aren’t the terms used in the marketing fluff. Instead, we have Super AMOLED, Dynamic AMOLED, Super LCD, Super Retina OLED, Super Retina XDR, Infinity Display, and so on. But what’s any of that actually mean?

The LED part of AMOLED stands for Light Emitting Diode. It’s the same tech as you find on many home appliances that show that the power is on with a little red light. An LED display takes this concept, shrinks it down, and arranges the LEDs in red, green, and blue clusters to create an individual pixel.

Finally, the AM part in AMOLED stands for Active Matrix, rather than a passive matrix technology. In a passive matrix, a complex grid system is used to control individual pixels, where integrated circuits control a charge sent down each column or row. But this is rather slow and can be imprecise. Active Matrix systems attach a thin film transistor (TFT) and capacitor to each sub-pixel (i.e. red, green, or blue) LED. The upshot is that when a row and column is activated, the capacitor at the pixel can retain its charge in between refresh cycles, allowing for faster and more precise control.

The image above is a close-up shot of the AMOLED display on the Samsung Galaxy S8. The RGB triangular pattern is clearly shown. Towards the bottom of the image, the green and red LEDs are off and the blue LEDs are on only slightly. This is why AMOLED displays have deep blacks and good contrast.

Super AMOLED is a marketing term from Samsung. It means a display that incorporates the capacitive touchscreen right in the display, instead of it being a separate layer on top of the display. This makes the display thinner.

Dynamic AMOLED is another marketing term from Samsung. It denotes Samsung’s next-generation AMOLED display which includes HDR10+ certification. According to Samsung, Dynamic AMOLED also reduces the harmful blue light emitted from the display, which helps reduce eye strain and helps lessen sleep disturbances if you’re using your phone late in the day!

As for Infinity Display (or Infinity-O Display), it is more marketing from Samsung. It means “a near bezel-less, full-frontal, edge-to-edge” display. However, it is still a Super AMOLED unit.

LCD displays work with a backlight that shines through some polarizing filters, a crystal matrix, and some color filters. Liquid crystals untwist when an electric charge is applied to them, which affects the frequency of the light that can pass through. Since the crystals can be twisted to varying degrees depending on the voltage used, a display can be built when they are used with polarized panels. A grid of integrated circuits is then used to control each pixel, by sending a charge down into a specific row or column. Colors are created by the use of red, green, and blue filters, known as sub-pixels, which are then blended by varying degrees to produce different colors.

The above image is of an LCD display from a Huawei Mate 8. Notice how the pixels are made up of equally-sized sub-pixels, one for each of the colors: red, green, and blue.

Like Super AMOLED, a Super LCD display also incorporates the touchscreen. There is no “air gap” between the outer glass and the display element, which means it has similar benefits to Super AMOLED.

Samsung isn’t the only company that is good at marketing, there is another! Apple has coined the term “Retina” for its displays. The term was first used for its smartphones with the launch of the iPhone 4, as it offered a significantly greater pixel density (over 300 ppi) when compared to the iPhone 3GS. Later came Retina HD, which applies to iPhones with at least a 720p screen resolution.

All Retina and Retina HD displays on the iPhone are LCD IPS displays. However, things have changed a bit with the iPhone X as it features an AMOLED display, now marketed under the term Super Retina. It’s still an AMOLED display. It just has extra adjectives. With the launch of the iPhone 11 Pro, Apple coined the term Super Retina XDR. The XDR part means Extended Dynamic Range, as they have better contrast ratios and higher peak brightness.

Not all Retina displays use OLED. Although the MacBook Pro is marketed with a “Retina” display, as you can see from the magnified image above, it is a regular LCD, even if it uses the latest Apple silicon.

Both technologies can be used to build displays with 720p, 1080p, Quad HD, and 4K resolutions. And OEMs have made handsets that support HDR10 using both LCD and AMOLED displays. So from that point of view, there isn’t much difference between the two.

When it comes to color, we know that the blacks will be deeper and the contrast ratios higher on AMOLED displays. But, overall color accuracy can be high on both types of display.

One of the main weaknesses of AMOLED displays is the possibility of “burn-in”. This is the name given to a problem where a display suffers from permanent discoloration across parts of the panel. This may take the form of a text or image outline, fading of colors, or other noticeable patches or patterns on the display. The display still works as normal, but there’s a noticeable ghost image or discoloration that persists. It occurs as a result of the different life spans between the red, green, and blue LED sub-pixels used in OLED panels.

Blue LEDs have significantly lower luminous efficiency than red or green pixels, which means that they need to be driven at a higher current. Higher currents cause the pixels to degrade faster. Therefore, an OLED display’s color doesn’t degrade evenly, so it will eventually lean towards a red/green tint (unless the blue sub-pixel is made larger, as you can see in the first image in this post). If one part of the panel spends a lot of time displaying a blue or white image, the blue pixels in this area will degrade faster than in other areas.

The theoretical lifespan of an AMOLED display is several years, even when used for 12 hours a day. However, there is anecdotal evidence that some displays suffer from burn-in quicker than others. Displays that show signs of burn-in after only a few months should be considered defective because they certainly aren’t normal.

While owners of devices with LCD screens might congratulate themselves for picking a smartphone that is immune to burn-in, there can be a problem with LCD panels called “image retention.” Put simply, liquid crystals can develop a tendency to stay in one position when left at the same voltage for extended periods. Thankfully this phenomenon is normally temporary and can usually be reversed by allowing the liquid crystals to return to their relaxed state.

Picking a winner can be hard as there are many factors to consider, not only about the display technologies but also about the other components in a handset. For example, if you are an AMOLED fan, then would you consider a device with large storage and a good processor, but with an LCD display? The same argument works the other way for LCD fans. Generally, you’ll be fine with either display type, so just pick the handset you like.

Higher-end devices typically sport AMOLED displays and mid-range/budget devices usually use LCD. But that isn’t set in concrete as there are plenty of high-end devices that have LCD displays. With OLED production costs dropping dramatically in recent years, more and more budget options will be offering OLED panels in the future.

Companies like LG and Samsung have seen this trend coming and are rapidly expanding their OLED (and flexible OLED) production capabilities. LCD might still have a bright future in televisions and other large-panel applications, but for now, it looks like mobile will be increasingly dominated by OLED screens.

What do you think? AMOLED or LCD? What about the terms like Retina vs Infinity Display? Are they meaningful to you? Please let me know in the comments below.

Small and medium sized displays (9 inches and smaller in diagonal) are used widely in a variety of medical and industrial equipment, as well as transportation and other infrastructure. Because these applications represent a small fraction of the demand for small-medium displays, buyers and designers need to follow the overall industry trends when considering product availability and capabilities.

The overall market for such displays has long been dominated by mobile phone applications, which account for slightly less than two-thirds of unit demand and slightly more than two-thirds of revenues. Smartphones are increasingly driving changes in the mobile phone market, and will become the largest mobile phone segment in unit terms by 2015. Growing even more rapidly are tablet PCs, which will pass the automotive market this year to be the second-largest small-medium display application in revenue terms. Thus, it is important to understand how the trends in these two market segments are driving display technology and manufacturing.

There are currently three key display technologies used in smartphones (Figure 1). The most well-established is the amorphous silicon form of TFT LCD (thin film transistor liquid crystal display), which is the dominant form of flat panel display technology. As smartphones began to take off after the original iPhone, the low-temperature polysilicon (LTPS) form of TFT LCD began to dominate the market, as LTPS enables higher pixel densities, as well as integration of other circuitry – such as driver ICs, touch sensors, and memory – which enables higher performance in a smaller display package. Finally, a few years ago, Samsung started mass production of the active matrix form of organic LED display technology (AMOLED), which enabled it to take increasing share of the growing smartphone display market.

Starting in 2011, two companies – Apple and Samsung – emerged to dominate the smartphone market; each gained market share in 2012, and now the two account for more than half of all smartphone shipments, as well as setting the standard for product design and technology. Among the most important ways in which the flagship smartphone product lines (iPhone, Galaxy) compete is through the choice of display. Apple’s iPhone has used TFT LCD, in particular LTPS, to set the standard for high resolution, going so far as to brand it “retina display,” as well as to integrate touch functionality into the display itself. Samsung’s Galaxy phones have largely utilized AMOLED technology, which has enabled large, colorful displays, with a different form of integrated touch, but at slightly lower pixel density. In general, LTPS displays are somewhat smaller but have higher pixel density than AMOLED displays (Figure 2). The iPhone retina display had the highest pixel density (324 pixels per inch) when it was first introduced, but the bar continues to be raised, with Japan Display, Inc. and Sharp both recently demonstrating 5 inch full HD (1920 x 1080 or 443 pixels per inch) LTPS panels.

Five companies dominate the smartphone display market – Samsung Display Corp., which makes AMOLED displays and TFT LCDs, and LG Display, Innolux Display, Sharp, and Japan Display, Inc., which all primarily make TFT LCDs, particularly LTPS.

The tablet PC market was created by the introduction of the original iPad, which for the first few years dominated the segment, defining a tablet PC as something around 10 inches in diagonal. However, over past few years, several competitors have entered the market in the 7 inch segment, finally joined by Apple with the iPad mini (at 7.85”). The high level of activity has created significant demand for 7-9 inch displays, and also has led to development of new levels of performance. Unlike in smartphones, in this case the clear leader is the a-Si TFT LCD, with LTPS not cost competitive, and AMOLED still struggling in terms of manufacturing cost.

As in smartphones, the trend in tablet PC displays has been toward higher pixel densities, though not as high as in smartphones, due to the longer viewing distance. While the mass market products are in formats such as 1024 x 600/768 and 1280 x 768/800, new devices from Amazon and Barnes and Noble are full HD (1920 x 1080). The dominant makers of 7 to 9 inch tablet PC panels are Samsung Display Corp. and LG Display.

From 2010 to 2014, the value of the small-medium display segment is expected to double, from $24 to $48 billion. All of the revenue growth is accounted for by mobile phone and tablet PC displays, as units grow rapidly, average screen sizes and resolution increase, and increasing functionality such as touch capability is integrated into such displays. This revenue growth is associated with a significant amount of technology development and manufacturing capacity. For applications needing small-medium displays, it would be very beneficial to tap into these two segments, riding the waves of improvement.

How do you understand for example Sony"s “Triluminous Display with X-Reality”, “OptiContrast Panel” and “Mobile Bravia Engine 2” to describe the Sony Z Ultra’s display?

The smartphone industry tosses around a whole bucket of names and numbers to describe the viewing experience on your smartphone screen: ClearBlack, 1080p, Retina, AMOLED, super-sensitive..... the list goes on and on.

Some designations like flashy Apple"s Retina Display are marketing monikers cooked up to give one company an edge. Sometimes however like in case of Nokia"s Clear Black Display technology the trademarked name masks a unique process too technical to quickly explain.

Before we dive in, it"s helpful to understand the layout of a smartphone screen. The oversimplified version is that displays are composed of several layers of material, starting backing material and including a lighting element (like the backlight for LCD screens), which is then topped with a TFT (thin-film transistor) layer, which uses voltage-sipping transistors to keep the display"s pixels shining until you refresh or change the image.

I still remember the days when my phone had a narrow monochromatic screen to display a phone number. Then we started to use texts and emails, therefore we needed a bit more space to see what we"d written. Next we added the colour to give the screen a bit more interest. When we started adding cameras to the phones, we wanted the screens to be sharper, so we could see the terrible, pixelated VGA photos we"d taken.

In practice, cheap phone screens will often display dull colours, and have narrow viewing angles, which means that if you look at them from off-centre, it becomes hard to see what"s on-screen.

The LCD screens are the most common technology used on mobile phones and they range from the budget smartphones like the HTC desire C to high-end tablets, like the Google Nexus 7. Two types of LCDs are primarily found in mobile phones: TFT and IPS technology.

TFT-LCD stands for thin-film transistor - liquid crystal display and use the thin-film transistor technology to improve image quality. They are often just referred to as LCD, since TFT-based LCD screens are the only type used in practice. Each pixel on a TFT-LCD has its own transistor on the glass itself, which offers more control over the images and colors that it renders.

While TFT-LCDs can deliver sharp images, they also tend to offer relatively poor viewing angles. TFT are found on more low-end smartphones or feature phones, and on basic cell phones.

IPS stands for in-plane switching. It involves arranging and switching the molecules of the liquid crystal (LC) layer between the glass substrates. This is done in a plane parallel to these glass plates. It features two transistors for each pixel, where TFT use just one. Requires a more powerful back-light (up to 15% comparing to TFT screens) but resolves the TFT"s weaknesses related to relatively high response time (lower is better), strong viewing angle dependence and low-quality color reproduction.

IPS are more expensive in production and typically are found on high-end mobile phones and portable devices. Apple"s iPhone, iPad, HTC One X and Nokia 920 are a good example of high quality IPS-LCDs screens.

The liquid crystals do no emit light themselves, so LCDs require a backlight. That means that LCD requires more power, and could potentially be more taxing on your phone’s battery.

The LCDs however produce some of the most realistic colors you can find on a screen, but might not offer as wide of a contrast ratio (darker darks and brighter brights) as AMOLED or OLED.

The most popular type of OLED panels on mobile devices is AMOLED technology. AMOLED stands for Active Matrix Organic Light-Emitting Diode and is even more power efficient than standard OLED displays.

Due to this simple construction, AMOLED offers many advantages over LCD displays as it is thinner, brighter, more power efficient and provides wider viewing angles. They also provide much better contrast and response times.

Mostly those advantages are down to the fact that AMOLED technology doesn"t require a back-light. The black colour stays truly black without producing an energy (unlike on many LCDs where the black is rather grey and its being artificially made), which also leads to expanding battery life as long as the background of your phone is close to black.

However AMOLED screens have proved costly and difficult to produce in the same numbers as LCD, a fact that forced HTC company to replace AMOLED screen in their HTC Desire for Super-LCD halfway through its manufacturing life. A decision that led HTC to stick with LCD screens onward. Often those screens were also criticized to have lower visibility in the direct light than their LCDs counterparts and having over-saturated colours, until Samsung introduced the next generation of Super AMOLED technology, which solved the above issues.

Super AMOLED display technology is an advanced version of AMOLED display. Developed by Samsung, it is said to be the thinnest display technology in the market. Super AMOLED display is also much more responsive than an AMOLED display.

LCD screens start with an always-on backlight; this technology requires light to create black, white, and colors. High-end LCDs produce the most accurate colors, though their manufacturers sometimes intentionally calibrate LCDs to produce weaker red, blue, and purple shades in order to reduce the device"s power consumption.

AMOLEDs also age more rapidly than LCD"s. Using an organic polymers, means that the red and blue colors deteriorate faster than green. Samsung used Super AMOLED plus screens in their Galaxy S II phones, but reverted back to Super AMOLED screens for the Galaxy S III citing screen life as the reason for the switch.

Both display technologies offer advantages and disadvantages. AMOLED screens have higher contrasts and deeper, true blacks, but LCD’s tend to offer more accurate colors. While AMOLED displays are brighter when viewed off-center, LCD panels can be viewed more easily under direct sunlight.

AMOLED displays tend to be more power efficient overall however, LCD panels are more power efficient when it comes to displaying web pages. AMOLED screens have better viewing angles, but LCD panels tend to be sharper on lower resolution panels thanks to the use of the RGB structure instead of PenTile/RGBG.

One of the problems with existing LCD displays used on smartphones is that they can’t keep up. While the internal hardware and operating system are fast enough to deliver a full 60 frames-per-second (FPS), the screens themselves lag behind, leading to pixelated video and ghost images appearing as your screen moves.

PureMotion HD+ uses an IPS type LCD display that is also given a higher voltage difference when changing states to produce a clean transition from frame to frame, even when operating at top speeds. This allows the display to deliver a steady 60FPS without any blurring. Nokia claims it lights up twice as fast on 920 than on any competing LCDs smartphones.

Ever take your phone outside and squint to read the screen? Phones with high reflectance can be a real setback, but some manufacturers are good at getting on top of it. ClearBlack is Nokia"s name for an anti-glare filters applied to the screen above the touch layer (but below the glass) on its high-end phones. It works on both AMOLED and LCD screens.

The color saturation is beyond the reach of any LCD out there, which make even the dullest image appear remarkably vibrant. Still, if you are not a fan of the oversaturated look of AMOLEDs, Samsung gives you the option to tune down the saturation to more natural levels and enjoy the best of both worlds. There"s a dedicated Adobe RGB setting that gets this done.

But the Xperia Z1 is making full use of Sony"s so-called Triluminos screen technology, which means adopting display technologies originally created for TV displays, such as the Bravia engine, and now Triluminos and X-Reality. Now that we have a little background, let’s see what Triluminos and X-Reality actually are and how they work. It is pretty fascinating, at least for me.

Triluminos is a technology that enables LCD TFT displays to show a wider range of colors, therefore the images are richer and more vivid. It’s all down to intelligent backlight technology, a Triluminos display reproduces more tones and textures than standard LED backlighting. Sony says that it boasts a color gamut that is 50 percent larger than that of a conventional LCD panel.

Conventional LCD displays use a white backlight that passes through red, blue, and green filters to form the color that the user perceives. The problem with this approach is that filters are not very selective – in other words, it’s hard to form very specific colors, and the end result might be a washed out colors (LCD needs very careful calibration to work perfectly). With Triluminos, the white backlight is replaced by a blue LED, which emits a blue light that causes a film of quantum dots to produce pure green and pure red. The different wavelength light is combined to form the color on the screen. This way the display can show more pure, unadulterated colors.

X-Reality EngineX-Reality is an image processing technology that enhances the images and videos displayed on the screen. It makes pictures look sharper, reduces noise, improves contrast, and fine tunes saturation.

Sony has been using the X-Reality and X-Reality Pro image processors on its high-end TVs for a while now, though it’s not clear if X-Reality for mobile is the same thing.

So, how does it work? According to Sony, the software breaks down the signal sent to the display into several components – texture, outline, contrast, and color. Each one is separately analyzed and processed, to ensure the clearest, sharpest, most attractive final image.

According to Sony,Triluminos and X-Realityshould allow the Sony screens to compete with the Super AMOLED displays on Samsung flagships, which are recognized for their rich colors. But that’s the theory. In practice Xperia"s Z1 screen is a huge improvement in image quality since the Xperia Z and the images are truly coming to live (also the viewing angles has been greatly improved) but still cannot compete fully not only with super AMOLED screens, but also with the top IPS LCD panels.

Saying that this technology is superior to conventional LCD"s, and most likely will become dominant in the next couple of years. The very first example of implementing it into LCD IPS screen is a new Amazon Kindle Fire HDX 8.9, that surpasses every panel on the market related to intensity and accuracy of the colours produced. Here are some of the key findings from DisplayMate"s regarding Nexus 7 vs Fire HDX vs new iPad Mini display shootout

The technology on offer from Apple with regards to the new 4-inch display is impressive – but only on a scale that matches that seen with the launch of the Retina Display in 2010.

However when Steve Jobs took to the stage to announce the Retina Display, he said it was sharper than the human eye could discern – and he was right, and despite other far-reaching efforts to up the sharpness nothing has really made me squint at a display in awe than that first shown on the iPhone 4.

When Apple rolled out the iPhone 5, they announced that it had a full sRGB gamut, and would be a substantial improvement over the 4 and 4S displays. They also had done away with layers of technology below the screen to bring the display as close to the glass as possible, something they said would bring increased brightness and sharpness to the user"s eye. In practice however, compering the quality and brightness, Iphone 4S has still upper hand.

HD Super AMOLED - Samsung"s name for its high-definition smartphone displays, which use the OLED screen technology and goes up to 1,920 x 1,080 pixels in phones

Retina Display - Apple"s proprietary name for its LCD screen, which serves up a 1,136x640 pixel resolution in mobile phones.1080p - The highest common high-definition screen resolution, measuring 1,920 pixels by 1,080 pixels. Also called "full HD."

720p -The lower high-definition designation, 1,280 by 720 pixels.Super LCD - Manufactured by Samsung, but used mostly by HTC, Super LCD is a display technology which removes the air gap between the outer glass and the display elements. This reduces the glare, and also consumes less power and has better outdoor visibility than regular LCD screens.

IPS - A type of LCD screen technology known for producing clearer image quality and wider viewing angles, among other traits. It"s used in many smartphones.

In recent years, smartphone displays have developed far more acronyms than ever before with each different one featuring a different kind of technology. AMOLED, LCD, LED, IPS, TFT, PLS, LTPS, LTPO...the list continues to grow.

As if the different available technologies weren"t enough, component and smartphone manufacturers adopt more and more glorified names like "Super Retina XDR" and "Dynamic AMOLED", which end up increasing the potential for confusion among consumers. So let"s take a look at some of these terms used in smartphone specification sheets and decipher them.

There are many display types used in smartphones: LCD, OLED, AMOLED, Super AMOLED, TFT, IPS and a few others that are less frequently found on smartphones nowadays, like TFT-LCD. One of the most frequently found on mid-to-high range phones now is IPS-LCD. But what do these all mean?

LCD means Liquid Crystal Display, and its name refers to the array of liquid crystals illuminated by a backlight, and their ubiquity and relatively low cost make them a popular choice for smartphones and many other devices.

LCDs also tend to perform quite well in direct sunlight, as the entire display is illuminated from behind, but does suffer from potentially less accurate colour representation than displays that don"t require a backlight.

Within smartphones, you have both TFT and IPS displays. TFT stands for Thin Film Transistor, an advanced version of LCD that uses an active matrix (like the AM in AMOLED). Active matrix means that each pixel is attached to a transistor and capacitor individually.

The main advantage of TFT is its relatively low production cost and increased contrast when compared to traditional LCDs. The disadvantage of TFT LCDs is higher energy demands than some other LCDs, less impressive viewing angles and colour reproduction. It"s for these reasons, and falling costs of alternative options, that TFTs are not commonly used in smartphones anymore.Affiliate offer

IPS technology (In-Plane Switching) solves the problem that the first generation of LCD displays experience, which adopts the TN (Twisted Nematic) technique: where colour distortion occurs when you view the display from the side - an effect that continues to crop up on cheaper smartphones and tablets.

The PLS (Plane to Line Switching) standard uses an acronym that is very similar to that of IPS, and is it any wonder that its basic operation is also similar in nature? The technology, developed by Samsung Display, has the same characteristics as IPS displays - good colour reproduction and viewing angles, but a lower contrast level compared to OLED and LCD/VA displays.

According to Samsung Display, PLS panels have a lower production cost, higher brightness rates, and even superior viewing angles when compared to their rival, LG Display"s IPS panels. Ultimately, whether a PLS or IPS panel is used, it boils down to the choice of the component supplier.

This is a very common question after "LED" TVs were launched, with the short answer simply being LCD. The technology used in a LED display is liquid crystal, the difference being LEDs generating the backlight.

One of the highlights from TV makers at the CES 2021 tradeshow, mini-LED technology seemed far removed from mobile devices until Apple announced the 2021 iPad Pro. As the name implies, the technique is based on the miniaturization of the LEDs that form the backlight of the screen — which still uses an LCD panel.

Despite the improvement in terms of contrast (and potentially brightness) over traditional LCD/LED displays, LCD/mini-LEDs still divide the screen into brightness zones — over 2,500 in the case of the iPad and 2021 "QNED" TVs from LG — compared to dozens or hundreds of zones in previous-generation FALD (full-array local dimming) displays, on which the LEDs are behind the LCD panel instead of the edges.

AMOLED stands for Active Matrix Organic Light-Emitting Diode. While this may sound complicated it actually isn"t. We already encountered the active matrix in TFT LCD technology, and OLED is simply a term for another thin-film display technology.

OLED is an organic material that, as the name implies, emits light when a current is passed through it. As opposed to LCD panels, which are back-lit, OLED displays are "always off" unless the individual pixels are electrified.

This means that OLED displays have much purer blacks and consume less energy when black or darker colours are displayed on-screen. However, lighter-coloured themes on AMOLED screens use considerably more power than an LCD using the same theme. OLED screens are also more expensive to produce than LCDs.

Because the black pixels are "off" in an OLED display, the contrast ratios are also higher compared to LCD screens. AMOLED displays have a very fast refresh rate too, but on the downside are not quite as visible in direct sunlight as backlit LCDs. Screen burn-in and diode degradation (because they are organic) are other factors to consider.Affiliate offer

OLED stands for Organic Light Emitting Diode. An OLED display is comprised of thin sheets of electroluminescent material, the main benefit of which is they produce their own light, and so don"t require a backlight, cutting down on energy requirements. OLED displays are more commonly referred to as AMOLED displays when used on smartphones or TVs.

Super AMOLED is the name given by Samsung to its displays that used to only be found in high-end models but have now trickled down to more modestly specced devices. Like IPS LCDs, Super AMOLED improves upon the basic AMOLED premise by integrating the touch response layer into the display itself, rather than as an extra layer on top.

As a result, Super AMOLED displays handle sunlight better than AMOLED displays and also require less power. As the name implies, Super AMOLED is simply a better version of AMOLED. It"s not all just marketing bluster either: Samsung"s displays are regularly reviewed as some of the best around.

The technology debuted with the obscure Royole FlexPai, equipped with an OLED panel supplied by China"s BOE, and was then used in the Huawei Mate X (pictured above) and the Motorola Razr (2019), where both also sport BOE"s panel - and the Galaxy Flip and Fold lines, using the component supplied by Samsung Display.Affiliate offer

Resolution describes the number of individual pixels (or points) displayed on the screen and is usually presented for phones by the number of horizontal pixels — vertical when referring to TVs and monitors. More pixels on the same display allow for more detailed images and clearer text.

To make it easier to compare different models, brands usually adopt the same naming scheme made popular by the TV market with terms like HD, FullHD and UltraHD. But with phones adopting a wide range of different screen proportions, just knowing that is not enough to know the total pixels displayed on the screen.Common phone resolutions

But resolution in itself is not a good measure for image clarity, for that we need to consider the display size, resulting in the pixel density by area measured by DPI/PPI (dots/points per inch).Affiliate offer

Speaking of pixel density, this was one of Apple"s highlights back in 2010 during the launch of the iPhone 4. The company christened the LCD screen (LED, TFT, and IPS) used in the smartphone as "Retina Display", thanks to the high resolution of the panel used (960 by 640 pixels back then) in its 3.5-inch display.

The name coined by Apple"s marketing department is applied to screens which, according to the company, the human eye is unable to discern the individual pixels from a normal viewing distance. In the case of iPhones, the term was applied to displays with a pixel density that is greater than 300 ppi (dots per inch).

With the iPhone 11 Pro, another term was introduced to the equation: "Super Retina XDR". Still using an OLED panel (that is supplied by Samsung Display or LG Display), the smartphone brings even higher specs in terms of contrast - with a 2,000,000:1 ratio and brightness level of 1,200 nits, which have been specially optimized for displaying content in HDR format.

As a kind of consolation prize for iPhone XR and iPhone 11 buyers, who continued relying on LCD panels, Apple classified the display used in the smartphones with a new term, "Liquid Retina". This was later applied also to the iPad Pro and iPad Air models, with the name defining screens that boast a high range and colour accuracy, at least based on the company"s standards.

Nit, or candela per square meter in the international system (cd/m²), is a unit of measurement of luminance, i.e. the intensity of light emitted. In the case of smartphone screens and monitors in general, such a value defines just how bright the display is - the higher the value, the more intense the light emitted by the screen.

The result is smoother animations on the phone, both during regular use and in games, compared to screens that have a 60 Hz refresh rate which remains the standard rate in the market when it comes to displays.

Originally touted to be a "gimmick" in 2017, with the launch of the Razer Phone, the feature gained more and more momentum in due time, even with a corresponding decrease in battery life. In order to make the most of this feature, manufacturers began to adopt screens with variable refresh rates, which can be adjusted according to the content displayed - which is 24 fps in most movies, 30 or 60 fps in home video recordings, and so forth.

TFT(Thin Film Transistor) - a type of LCD display that adopts a thin semiconductor layer deposited on the panel, which allows for active control of the colour intensity in each pixel, featuring a similar concept as that of active-matrix (AM) used in AMOLED displays. It is used in TN, IPS/PLS, VA/PVA/MVA panels, etc.

LTPS(Low Temperature PolySilicon) - a variation of the TFT that offers higher resolutions and lower power consumption compared to traditional TFT screens, based on a-Si (amorphous silicon) technology.

IGZO(Indium Gallium Zinc Oxide) - a semiconductor material used in TFT films, which also allows higher resolutions and lower power consumption, and sees action in different types of LCD screens (TN, IPS, VA) and OLED displays

LTPO(Low Temperature Polycrystaline Oxide) - a technology developed by Apple that can be used in both OLED and LCD displays, as it combines LTPS and IGZO techniques. The result? Lower power consumption. It has been used in the Apple Watch 4 and the Galaxy S21 Ultra.

LTPO allows the display to adjust its refresh rate, adapting dynamically to the content shown. Scrolling pages can trigger the fastest mode for a fluid viewing, while displaying a static image allows the phone to use a lower refresh rate, saving the battery.

Among televisions, the long-standing featured technology has always been miniLED - which consists of increasing the number of lighting zones in the backlight while still using an LCD panel. There are whispers going around that smartphones and smartwatches will be looking at incorporating microLED technology in their devices soon, with it being radically different from LCD/LED displays as it sports similar image characteristics to that of OLEDs.

A microLED display has one light-emitting diode for each subpixel of the screen - usually a set of red, green, and blue diodes for each dot. Chances are it will use a kind of inorganic material such as gallium nitride (GaN).

By adopting a self-emitting light technology, microLED displays do not require the use of a backlight, with each pixel being "turned off" individually. The result is impressive: your eyes see the same level of contrast as OLED displays, without suffering from the risk of image retention or burn-in of organic diodes.

Another thing to be wary of is the price - at 170 million Korean won (about US$150,330 after conversion), that is certainly a lot of money to cough up for a 110-inch display.

In addition, the organic diodes that give OLED screens their name can lose their ability to change their properties over time, and this happens when the same image is displayed for a long period of time. This problem is known as "burn-in", tends to manifest itself when higher brightness settings are applied for long periods of time.

In the case of LCD displays, the main advantage lies in the low manufacturing cost, with dozens of players in the market offering competitive pricing and a high production volume. Some brands have taken advantage of this feature to prioritize certain features - such as a higher refresh rate - instead of adopting an OLED panel, such as the Xiaomi Mi 10T.

Retina Display is a brand name used by Apple for its series of IPS LCD and OLED displays that have a higher pixel density than traditional Apple displays.trademark with regard to computers and mobile devices with the United States Patent and Trademark Office and Canadian Intellectual Property Office.

The Retina display debuted in 2010 with the iPhone 4 and the iPod Touch (4th Generation), and later the iPad (3rd generation) where each screen pixel of the iPhone 3GS, iPod touch (3rd generation), iPad 2 was replaced by four smaller pixels, and the user interface scaled up to fill in the extra pixels. Apple calls this mode HiDPI mode. In simpler words, it is one logical pixel = four physical pixels. The scale factor is tripled for devices with even higher pixel densities, such as the iPhone 6 Plus and iPhone X.

The Retina display has since expanded to most Apple product lines, such as Apple Watch, iPhone, iPod Touch, iPad, iPad Mini, iPad Air, iPad Pro, MacBook, MacBook Air, MacBook Pro, iMac, and Pro Display XDR, some of which have never had a comparable non-Retina display.marketing terms to differentiate between its LCD and OLED displays having various resolutions, contrast levels, color reproduction, or refresh rates. It is known as Liquid Retina display for the iPhone XR, iPad Air 4th Generation, iPad Mini 6th Generation, iPad Pro 3rd Generation and later versions,Retina 4.5K display for the iMac.

Apple"s Retina displays are not an absolute standard for display sharpness, but vary depending on the size of the display on the device, and at what distance the user would typically be viewing the screen. Where on smaller devices with smaller displays users would view the screen at a closer distance to their eyes, the displays have more PPI (Pixels Per Inch), while on larger devices with larger displays where the user views the screen further away, the screen uses a lower PPI value. Later device versions have had additional improvements, whether an increase in the screen size (the iPhone 12 Pro Max), contrast ratio (the 12.9” iPad Pro 5th Generation, and iMac with Retina 4.5K display), and/or, more recently, PPI count (OLED iPhones); as a result, Apple uses the names “Retina HD display", "Retina 4K/5K display", “Retina 4.5K display", "Super Retina HD display", “Super Retina XDR display”, and "Liquid Retina display" for each successive version.

When introducing the iPhone 4, Steve Jobs said the number of pixels needed for a Retina display is about 300 PPI for a device held 10 to 12 inches from the eye.skinny triangle with a height equal to the viewing distance and a top angle of one degree will have a base on the device"s screen that covers 57 pixels. Any display"s viewing quality (from phone displays to huge projectors) can be described with this size-independent universal parameter. Note that the PPD parameter is not an intrinsic parameter of the display itself, unlike absolute pixel resolution (e.g. 1920×1080 pixels) or relative pixel density (e.g. 401 PPI), but is dependent on the distance between the display and the eye of the person (or lens of the device) viewing the display; moving the eye closer to the display reduces the PPD, and moving away from it increases the PPD in proportion to the distance.

In practice, thus far Apple has converted a device"s display to Retina by doubling the number of pixels in each direction, quadrupling the total resolution. This increase creates a sharper interface at the same physical dimensions. The sole exception to this has been the iPhone 6 Plus, 6S Plus, 7 Plus, and 8 Plus, which renders its display at triple the number of pixels in each direction, before down-sampling to a 1080p resolution.

The displays are manufactured worldwide by different suppliers. Currently, the iPad"s display comes from Samsung,LG DisplayJapan Display Inc.twisted nematic (TN) liquid-crystal displays (LCDs) to in-plane switching (IPS) LCDs starting with the iPhone 4 models in June 2010.

Apple markets the following devices as having a Retina display, Retina HD display, Liquid Retina display, Liquid Retina XDR display, Super Retina HD display, Super Retina XDR display or Retina 4K/5K/6K display:

Reviews of Apple devices with Retina displays have generally been positive on technical grounds, with comments describing it as a considerable improvement on earlier screens and praising Apple for driving third-party application support for high-resolution displays more effectively than on Windows.T220 and T221 had been sold in the past, they had seen little take-up due to their cost of around $8400.

Writer John Gruber suggested that the arrival of Retina displays on computers would trigger a need to redesign interfaces and designs for the new displays:

The sort of rich, data-dense information design espoused by Edward Tufte can now not only be made on the computer screen but also enjoyed on one. Regarding font choices, you not only need not choose a font optimized for rendering on screen, but should not. Fonts optimized for screen rendering look cheap on the retina MacBook Pro—sometimes downright cheesy—in the same way they do when printed in a glossy magazine.

Raymond Soneira, president of DisplayMate Technologies, has challenged Apple"s claim. He says that the physiology of the human retina is such that there must be at least 477 pixels per inch in a pixelated display for the pixels to become imperceptible to the human eye at a distance of 12 inches (305 mm).Phil Plait notes, however, that, "if you have [better than 20/20] eyesight, then at one foot away the iPhone 4S"s pixels are resolved. The picture will look pixelated. If you have average eyesight [20/20 vision], the picture will look just fine... So in my opinion, what Jobs said was fine. Soneira, while technically correct, was being picky."

Apple fan website CultOfMac hosts an article by John Brownlee"Apple"s Retina Displays are only about 33% of the way there."visual acuity in the population saying "most research suggests that normal vision is actually much better than 20/20" when in truth the majority have worse than 20/20 vision,WHO considers average vision as 20/40.presbyopia

The first smartphone following the iPhone 4 to ship with a display of a comparable pixel density was the Nokia E6, running Symbian Anna, with a resolution of 640 × 480 at a screen size of 62.5mm. This was an isolated case for the platform however, as all other Symbian-based devices had larger displays with lower resolutions. Some older Symbian smartphones, including the Nokia N80 and N90, featured a 2.1 inch display at 259 ppi, which was one of the sharpest at the time. The first Android smartphones with the same display - Meizu M9 was launched a few months later in beginning of 2011. In October of the same year Galaxy Nexus was announced, which had a display with a better resolution. By 2013 the 300+ ppimark was found on midrange phones such as the Moto G.Samsung Galaxy S4 and HTC One (M8) had 1080p (FHD) screens around 5-inches for a 400+ PPI which surpassed the Retina density on the iPhone 5. The second major redesign of the iPhone, the iPhone 6, has a 1334 × 750 resolution on a 4.7-inch screen, while rivals such as the Samsung Galaxy S6 have a QHD display of 2560 × 1440 resolution, close to four times the number of pixels found in the iPhone 6, giving the S6 a 577 PPI that is almost twice that of the iPhone 6"s 326 PPI.

The larger iPhone 6 Plus features a "Retina HD display", which is a 5.5-inch 1080p screen with 401 PPI. Aside from resolution, all generations of iPhone Retina displays receive high ratings for other aspects such as brightness and color accuracy, compared to those of contemporary smartphones, while some Android devices such as the LG G3 have sacrificed screen quality and battery life for high resolution. Ars Technica suggested the "superfluousness of so many flagship phone features—the move from 720p to 1080p to 1440p and beyond...things are all nice to have, but you’d be hard-pressed to argue that any of them are essential".

Pixel, also called Picture Element, A pixel is the smallest unit of a digital image or graphic that can be displayed and represented on a digital display device. A pixel is the basic logical unit in digital graphics. Pixels are combined to form a complete image, video, text, or any visible thing on a computer display

LCD display doesn’t operate the same way as CRT displays , which fires electrons at a glass screen, a LCD display has individual pixels arranged in a rectangular grid. Each pixel has RGB(Red, Green, Blue) sub-pixel that can be turned on or off. When all of a pixel’s sub-pixels are turned off, it appears black. When all the sub-pixels are turned on 100%, it appears white. By adjusting the individual le