tocs 4.3 inch lcd display supplier

Being a TOCS system this unit will interface with other compatible products such as Chartploters and is also able to receive signal from select analogue senders.

TOCS 4.3 inch LCD Display (optional): The optional TOCS (Tohatsu Onboard Communication System) 4.3 inch LCD Display connects to the CAN bus and communicates directly with the engine"s ECU. Engine data, fault codes, and alarms are displayed on the LCD display.

The owner of this website (www.thehulltruth.com) has banned the autonomous system number (ASN) your IP address is in (20473) from accessing this website.

Tohatsu roars into the model year with a trio of new offerings, the single overhead cam four-cylinder MFS75, MFS90, and MFS115. These block-sharing models incorporate Tohatsu’s “performance tuned” isometric aggregated exhaust system featuring four equal-length exhaust passages that merge into two, reducing exhaust gas interference. The manufacturer claims that the result is boosted torque and faster acceleration. The 75/90/115 can display data digitally on the TOCS 4.3-inch LCD display via a CAN bus connection. Engine weight is 392/402 pounds, displacement 121.6 cubic inches. $10,286 to $11,643 | tohatsu.com

The IPS technology delivers exceptional image quality with superior color representation and contrast ratio at any angle. This 24-bit true color Liquid Crystal Display is RoHS compliant and does not include a touch panel.

Buyers can option this engine with regular analogue engine gauges, or with Tohatsu"s latest TOCS 4.3-inch LCD digital display. This Tohatsu Outboard Communication System provides access to the full range of engine data, from revs, speed and fuel flow to engine temperature, battery voltage, oil pressure, and more.

With two adults onboard, and running a 16-inch pitch stainless steel prop, the Tohatsu accelerated the Makocraft enthusiastically from idle, jumping the boat quickly onto the plane and into the mid-rev range.

ER-TFT043A2-3 is 480x272 dots 4.3" color tft lcd module display with driver IC ST7282 and optional capacitive touch panel with controller and connector,optional 4-wire resistive touch panel with connector,superior display quality,wide view angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO,ARM and Raspberry PI .

It can be used in any embedded systems,car,mp4,gps,industrial device,security and hand-held equipment which requires display in high quality and colorful image.It supports rgb interface. FPC with zif connector is easily to assemble or remove.Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for 4.3"TFT Touch Shield with Libraries, Examples.Schematic Diagram for Arduino Due,Mega 2560,Uno and 8051 Microcontroller Development Board&Kit.

The TOCS (Tohatsu Onboard Communication System) 4.3 inch LCD Display connects to the CAN bus and communicates directly with the engine"s ECU. Engine data, fault codes, and alarms are displayed on the LCD display.

The optional TOCS (Tohatsu Onboard Communication System) 4.3 inch LCD Display connects to the CAN bus and communicates directly with the engine"s ECU. Engine data, fault codes, and alarms are displayed on the LCD display.

This 24-bit true color TFT display module has built-in HDMI compatibility for a streamlined connection between devices with fewer cables. Assembled to the display, the custom PCB provides the user an all-in-one, plug-and-play HDMI + USB touch solution and is attached to a steel mounting bracket for easy, secure installation. Included on-board this module is a Texas Instruments TFP401A HDMI/DVI receiver and a high brightness LED driver with PWM. Whether you need a display for your Raspberry Pi/BeagleBone Black application, a Windows/Windows embedded PC monitor, or a touchscreen HMI for your Linux or other embedded system, this display offers a solution. The LCD has a high resolution 800X480 screen with IPS technology, which delivers superior image quality, accurate color reproduction, and high contrast ratio at every angle. This Liquid Crystal Display is RoHS compliant and has a USB-HID capacitive touch panel with no requirement for external driver installation.

Choose from a wide selection of interface options or talk to our experts to select the best one for your project. We can incorporate HDMI, USB, SPI, VGA and more into your display to achieve your design goals.

Equip your display with a custom cut cover glass to improve durability. Choose from a variety of cover glass thicknesses and get optical bonding to protect against moisture and debris.