lcd display 16x2 datasheet supplier

16×2 LCD is named so because; it has 16 Columns and 2 Rows. There are a lot of combinations available like, 8×1, 8×2, 10×2, 16×1, etc. But the most used one is the 16*2 LCD, hence we are using it here.

All the above mentioned LCD display will have 16 Pins and the programming approach is also the same and hence the choice is left to you. Below is the Pinout and Pin Description of 16x2 LCD Module:

These black circles consist of an interface IC and its associated components to help us use this LCD with the MCU. Because our LCD is a 16*2 Dot matrix LCD and so it will have (16*2=32) 32 characters in total and each character will be made of 5*8 Pixel Dots.  A Single character with all its Pixels enabled is shown in the below picture.

So Now, we know that each character has (5*8=40) 40 Pixels and for 32 Characters we will have (32*40) 1280 Pixels. Further, the LCD should also be instructed about the Position of the Pixels.

It will be a hectic task to handle everything with the help of MCU, hence an Interface IC like HD44780 is used, which is mounted on LCD Module itself. The function of this IC is to get the Commands and Data from the MCU and process them to display meaningful information onto our LCD Screen.

The LCD can work in two different modes, namely the 4-bit mode and the 8-bit mode. In 4 bit mode we send the data nibble by nibble, first upper nibble and then lower nibble. For those of you who don’t know what a nibble is: a nibble is a group of four bits, so the lower four bits (D0-D3) of a byte form the lower nibble while the upper four bits (D4-D7) of a byte form the higher nibble. This enables us to send 8 bit data.

As said, the LCD itself consists of an Interface IC. The MCU can either read or write to this interface IC. Most of the times we will be just writing to the IC, since reading will make it more complex and such scenarios are very rare. Information like position of cursor, status completion interrupts etc. can be read if required, but it is out of the scope of this tutorial.

The Interface IC present in most of the LCD is HD44780U,in order to program our LCD we should learn the complete datasheet of the IC. The datasheet is given here.

There are some preset commands instructions in LCD, which we need to send to LCD through some microcontroller. Some important command instructions are given below:

Winstar WH1602B is one of the most popular character LCD display module 16x2 types in the market. WH1602B 16x2 LCD display model is built in with ST7066 controller IC or equivalent; its default interface is 6800 4/8-bit parallel. The model no. WH1602B1 is having 4 line SPI interface, as to the part no. WH1602B3 is having I2C interface.

16x2 LCD modules are very commonly used in most embedded projects, the reason being its cheap price, availability, programmer friendly and available educational resources.

16×2 LCD is named so because; it has 16 Columns and 2 Rows. There are a lot of combinations available like, 8×1, 8×2, 10×2, 16×1, etc. but the most used one is the 16×2 LCD. So, it will have (16×2=32) 32 characters in total and each character will be made of 5×8 Pixel Dots. A Single character with all its Pixels is shown in the below picture.

Now, we know that each character has (5×8=40) 40 Pixels and for 32 Characters we will have (32×40) 1280 Pixels. Further, the LCD should also be instructed about the Position of the Pixels. Hence it will be a hectic task to handle everything with the help of MCU, hence an Interface IC like HD44780is used, which is mounted on the backside of the LCD Module itself. The function of this IC is to get the Commands and Data from the MCU and process them to display meaningful information onto our LCD Screen. You can learn how to interface an LCD using the above mentioned links. If you are an advanced programmer and would like to create your own library for interfacing your Microcontroller with this LCD module then you have to understand the HD44780 IC working and commands which can be found its datasheet.

RC1602C is a 16x2 character type LCD display with module dimension 85.0 x 36.0 mm. This monochrome display LCD 16x2 has built-in IC ST7066. Default interface of RC1601A module is 6800; if you require interface such as SPI or I2C, they’re available as well, but the IC will be replaced with RW1063.

Raystar provides various LED backlight combinations for RC1602C 16 character x 2 lines LCD display module, such as yellow-green, green and white. You can choose module with LED backlight or without it.

This RC1602C display LCD 16x2 offers a selection of fonts, including English/Japanese, Europe and Cyrillic (Russian), etc. Feel free to contact us if you need full datasheet or more info of this display lcd 16x2.

Text: sales@p-tec.net Tel: Fax: (719) 589 3122 (719) 589 3592 PC1602A-L( 16x2 ) Character LCD Display , ( 16x2 ) Character LCD Display Absolute Maximum Ratings at TA = 25 °C Features *16 Character, 2 Line , sales@p-tec.net Tel: Fax: (719) 589 3122 (719) 589 3592 PC1602B-L( 16x2 ) Character LCD Display , PC1602C-L( 16x2 ) Character LCD Display Absolute Maximum Ratings at TA = 25 °C Features *16 Character, 2 , ( 16x2 ) Character LCD Display 80.0± 0.5 2.5 8.0 2.54x15=38.1 1.8 16-Ø1.0 2.0 4-Ø2.5 8.8

Text: Optrex Numbering System DOT MATRIX Type LCD Modules DMC ­ 50000 N Y H U ­ S E B 1 Standard Pin Connections Pin No. Symbol Pin No. OPTREX CORPORATION HIGH CONTRAST LCD MODULE FEATURES , 7 1 Symbol 14 DB7 1. Type of Display: 2. Development Number: 3. LCD TYPE: 4 , . W x H (mm) (°C) - - - - - - - - - - - - 16x1 16x1 16x1 16x2 16x2 16x2 16x2 16x2 16x2 16x2 16x2 16x2 PRD250LPW1-ND N/A N/A PRD250LPW-ND PRD250LPW-ND

Abstract: 16x2 lcd HD44780 hitachi 16x2 lcd LCD ASCII CODE 16x2 LCD ASCII table CODE 16x2 HD44780 16x2 16x2 lcd HD44780 16x1 LCD command lcd display 16x2 LCD display module 16x2 HD44780

Text: character LCD display that is fitted with a Hitachi HD44780 controller. This 16x2 character LCD uses the , characters displayed per line characterize LCDs into 16x2 , 40x2, and 40x4 dimensions. An LCD requires a , eZ80Acclaim! MCU is a 16x2 character LCD controlled by the HD44780 controller by Hitachi. It features the , Related DDRAM Address for a 16x2 LCD Character Generator ROM Busy Flag The LCD Module"s HD44780, software developed for this application implements driver API code for a 16x2 LCD Module with appropriate

Text: Y SERIES RoHS compliant http://www.noritake-elec.com/y-series.htm 16 x 2 LCD footprint , 16x2 32 25 50 20 x 2 LCD footprint Brightness comparison (Cd/m2) CU20027-YX1A, Series Available interfaces CU22042-Y1A 22x4 characters in 16x2 LCD footprint. 8 bit parallel , number comparison CU24043-Y1A 96 20x2 20 x 4 LCD footprint CU24063-Y1A / Y100 40 25 50 , interface Data CU20027-YX1A 20x2 LCD footprint and brightest Vacuum Fluorescent Display (VFD) module

Abstract: 16X2 LCD rohs 24 pin diagram of lcd display 16x2 pin diagram of serial lcd display 16x2 lm1117 3.3V pin architecture of lcd display 16x2 display 16x2 i2c 16x2 display 14 pin diagram of lcd display 16x2 usb/doc lcd 16x2 14 pin

Text: INTRODUCTION ADuC-MT7020 is small terminal board with USB link for PC, two buttons, LCD 16x2 with backlight , (bootloader enable) button ­ Two buttons ­ LCD 16x2 display with BACKLIGHT ­ 32 768 Hz , ADuC-MT7020 development board Users Manual All boards produced by Olimex are ROHS compliant , , connected to ADuC7020 pin 20 (P0.4). User button with name B2, connected to ADuC7020 pin 21 (P0.5). LCD 16x2 display with BACKLIGHT, connected as follows: RS ­ to ADuC7020 pin 34 (P4.2); R/W ­ to ADuC7020

Text: 602CGSR3S67S 16x2 CHARACTER LCD MODULE, C.O.G STN GRAY, REFLECTIVE, 6:00 VIEW, W/PINS, IC: NT7605, 240 CGR0M , 602CGSR3S67S 16x2 CHARACTER LCD MODULE, C.O.G STN GRAY, REFLECTIVE, 6:00 VIEW, W/PINS, IC: NT7605, 240 CGR0M , = ^jg,1 + DECNAL PRECHDN +0.00 -CEQMAL PRECJSBN REV. PART NUMBER LCM-H1602CGSR3S67S 16x2 CHARACTER LCD MODULE. C.O.G STN GRAY, REFLECTIVE, 6:00 VIEW, W/PINS, IC; NT7605, 240 CGR0M,VLCD , V5 VDD RS R/W BD0-BD7 k w LCD CONTROLLER NT7605 C0M1-C0M16 LCD PANEL 2

Text: PAGE ASIC / FOUNDRY 3 ASIC ORDERING INFORMATION 4 CMOS IMAGE SENSORS 5 LCD DRIVER ICs 5-6 LCD DRIVER IC ORDERING INFORMATION 7 MOBILE APPLICATION PROCESSORS 8 HDTV , ) 11. " - " 4 SAMSUNG SEMICONDUCTOR, INC. BR-07-ALL-002 AUGUST 2007 Image Sensors / LCD , -07-ALL-002 SAMSUNG SEMICONDUCTOR, INC. 5 SYSTEM LSI LCD Driver ICs BW STN GRAPHIC DISPLAY DRIVER IC FOR , in case of TCP BR-07-ALL-002 AUGUST 2007 LCD Driver IC Ordering Information SYSTEM LSI

Abstract: lcd 16x2 instruction set 24 pin diagram of lcd display 16x2 16X2 LCD TIMING CHARACTERISTICS 16x4 LCD ddram STN negative Blue 16X2 lcd display TC162F 16 pin diagram of lcd display 16x1 16X4 LCD CHARACTER CODE Okaya Electric Industries

Text: MPU -» LCD Module ■1": Read MPU «- LCD Module E I Operation start signal for data read or write , "s NORMAL TEMP (+5VDC) WIDE TEMP (±SVDC) LCD v Module O vDD-VO VR 10KQ - 20KQ VDD LCD v Module SS vO , END TC162G 16X2 5X8 3.65X4.35 64.5 X 13.8 1/16 80.0 X 36.0 © © © © © © SIL TOP TC162S 2.95 X 5.55 61.0 X 15.8 80.0 X 36.0 © © © - © © SIL TOP TC162W 16X2 5X8 , 84.0 X 44.0 © © © © © © SIL BTM TC162C 16X2 5X8 2.96 X 5.56 62.0 X 16.0 1/16

Text: -CEC1MAL PRECISION REV. A PART NUMBER LCM-H01 602DWF/CB2 16x2 CHARACTERS LCD MODULE, FSTN , \ 16x2 . 1/16 DUTY, 1/5 BIAS DB ( db a e -R/W-RS-Vss - VDD -VD- A-K- LCD CONTROLLER LSI & DRIVER , PRKI9I!N MAX, I _ +Q.OD " -CFOMAL PRECISION REV. A PART NUMBER LCM-H01 602DWF/CB2 16x2 CHARACTERS LCD , . SYMBOL LEVEL FUNCTION 1 % - POWER SUPPLY 5V 2 Vss - GND <0V) 3 Vo - FOR LCD DRIVE 4- RS H/L , MODE. A ANODE LED BACKUGHT K - CATHODE LED BACKUGHT Vdq-VO: LCD DRIVING VOLTAGE VR: I DKfl

Text: Type (KBytes) (Bytes) I/OPins Interrupt (Int/Ext) Timer/Counter SIO LCD (Seg/Com , Interrupt (Int/Ext) Timer/Counter Serial LCD Interface (Seg/Com) S3F9xxx (KS86) Series , LCD Interface (Seg/Com) ADC (BitxCh) PWM(1) (BitxCh) Max.Osc. Freq. Min Exe. Time (ns , 8x1, 16x2 12MHz 333 2.0~5.5 -25~85 Internal 8MHz RC Oscillator S3F8xxx (KS88) Series , ROM RAM Type (KBytes) (Bytes) I/OPins Serial LCD Interface (Seg/Com) Interrupt (Int/Ext

Text: REV. A PART NUMBER LCM-H01 602DWF/C-1 B 16x2 CHARACTERS LCD MODULE, TOP VIEW, FSTN, TRANSFLECTIVE , DIAGRAM\ 16x2 . 1/16 DUTY, 1/5 BIAS DB 7 s DB □ E -R/W -RS -Vss-VDD -Vo- c5 A-K- LCD CONTROLLER LS , 602DWF/C-1 B 16x2 CHARACTERS LCD MODULE. TOP VIEW. FSTN, TRAN5FLECTIVE, ONE CHIP BLUE LED BACKLIGHT, 1 , . SYMBOL LEVEL FUNCTION 1 % - POWER SUPPLY 5V 2 Vss - GND (OV) 3 Vo - FOR LCD DRIVE 4 RS H/L , MODE. A ANODE LED BACKUGHT K - CATHODE LED BACKUGHT Vßß-Vo: LCD DRIVING VOLTAGE VR: 1 BKfl â

Text: €“ LCD 16x2 alphanumeric display with backlight – 2 Buttons – bi-color LED â , (RB5). User button with name B2, connected to U1 - pin 37 (RB4). LCD 16x2 display with BACKLIGHT , PIC-MT-USB development board Users Manual All boards produced by Olimex are ROHS compliant , : PIC-MT-USB is small development board for 40 pin PIC microcontroller. With its LCD , two buttons, USB, ICSP , pin 30 (RD7). Potentiometer with name TR1 for setting LCD contrast voltage. Bi-colour status Led

Text: 602DWF/C-B 16x2 CHARACTERS LCD MODULE, FSTN, TRANSFLECTIVE, ONE CHIP BLUE LED BACKLIGHT, 1/16 DUTY, 1/5 , precision REV. A PART NUMBER LCM-H01 602DWF/C-B 16x2 CHARACTERS LCD MODULE, FSTN, TRANSFLECTIVE, ONE , 2 Vss - gnd <0v) 3 vo - for lcd drive 4- rs h/l register select signal hr data input l , led backught Vdq-VO: LCD DRIVING VOLTAGE VR: I BKfl, —20K O ELECTRICAL CHARACTERISTICS \ VDD , pd lf=20mA - 53 - mw color - blue - - - nm /BLOCK DIAäRAM\ 16x2 . 1/16 DUTY, 1/5 BIAS DB ( DB

Text: PRECISI0N MAX.= +0.00 -DECIMAL PRECISION REV. PART NUMBER LCM—H1602CGSR38678 16x2 CHARACTER LCD , LCM—H1602CGSR38678 16x2 CHARACTER LCD MODULE, C.O.G STN GRAY, REFLECTIVE, 6:00 VIEW, W/PINS, IC: SSD1801Z, 240 , .= ISmi -DECIMAL PRECISION REV. PART NUMBER LCM—H1602CGSR38678 16x2 CHARACTER LCD MODULE, C.O.G , D/C /CS SDA(D7) SCK(D6) VDD vss VL6 VF VOUT C2-C2+ C1-C1 + /RES LCD CONTROLLEER SSD1801Z C0M1~C0M16 LCD PANEL 2 UNE X 16 CHARACTERS SEG0~SEG80 PIN DESCRIPTION PART NUMBER LCM —H1 602CGSR38678

Abstract: TC202A HEADER RT TC162C 16x1 LC display 16X2 LCD TIMING CHARACTERISTICS 16X2 LCD CHARACTER CODE 24 pin diagram of lcd display 16x2 lcd display 16x2 instruction set Okaya lcd

Text: Name I/O Power Supply Requirements Function V DD-VO LCD v V s s V o c V o RS R/W E DBO thru , MPU LCD Module "1": Read MPU LCD Module Operation start signal for data read or write Data Bus of , © © © © © © © © © © © © © © © © © | © | _ _ © © - 16X2 5X8 1/16 1 6X2 5X8 1/16 _ © _ _ 16X2 5X8 1/16 © © © © © © _ 16X2 5X8 1/16 © _ 16X2 5X8 1/16 © © _ 16X2 5X8 1/16 © © T , Above B T U A LCD TYPE/COLOR Type Background Character Code Grey TN Black Yellow STN Blue Gray k

Abstract: 16x2 Text LCD optrex lcd display 16x2 16207 LCD display module 16x2 characters block diagram of lcd display 16x2 LCD MODULE optrex 16x2 driver lcd 16x2 LCD display module 16x2 optrex user manual

Text: SOPC Builder In SOPC Builder, the LCD controller component has the name Character LCD ( 16x2 , behavior on a miniature scale for the 16x2 screen. Characters written to the LCD controller are stored to , 10. Optrex 16207 LCD Controller Core NII51019-7.1.0 Core Overview The Optrex 16207 LCD controller core with Avalon® Interface ("the LCD controller") provides the hardware interface and software driver required for a Nios® II processor to display characters on an Optrex 16207 (or equivalent) 16x2

Text: LCM-E01 602DSR 5.56 CHARACTER HEIGHT. 16x2 CHARACTERS. LCD MODULE. 5 x B DOT MATRIX, SERIAL INPUT, STN , . D PART NUMBER LCM-E01 602DSR 5.56 CHARACTER HEIGHT, 16x2 CHARACTERS, LCD MODULE, 5 x B DOT MATRIX , . D PART NUMBER LCM-E01 602DSR 5.56 CHARACTER HEIGHT, 16x2 CHARACTERS, LCD MODULE. 5 x B DOT MATRIX , SUPPLY VOLTAGE FOR LCD DRIVE Vo Ta=2!fC - O.B - V AT89C2051-12SI CONTROLLER RS R/W DB0~DB7 ICL7660 LCD CONTROLLER 1 LCD PANEL ABSOLUTE MAXIMUM RATINGS ITEM SYMBOL STANDARD VALUE UNIT MIN MAX

Text: €) with a 16x2 character LCD screen, a reference input BNC(F) port and a signal input SMA(F) port. Using , preference. LCD 16x2 character LCD providing the frequency reading, and information on the frequency , €™ UFC-6000( RoHS compliant) is a small, light weight Frequency Counter operating over the frequency , reference • Can be operated remotely using a PC with USB interface or independently • 16X2 Character LCD • Compatible with 32/64-bit Windows® or Linux® operating systems • ActiveX com object and

Abstract: PC1602-v PC1602V VGG804805-6UFLWA 7 inch 800x480 LCD panel PG12864-F NL160120BC27-14 S6B0108B NL10276BC13-01C lcd touchscreen elo inverter board

Text: lead-free and RoHS compliant Hitachi Colour LCD · Excellent optical performance is achieved using , integral part of our life. Just about every man-machine interface can be achieved with an LCD . Arrow , you with all these technologies and not just from a component level. · · Custom LCD Panels & , · · · · TFT Controller Boards LCD Display Switches · LCD Touch Monitors · LCD Chassis Monitors · · · LCD Open Frame Monitors · · · Touchscreens ·

Text: 30x4 FX-25DU-E yes yes yes yes yes yes 65 151x85x89 LCD Yellow/Red 10x4 MAC50 yes yes yes yes yes yes yes 65 190x175x50 LCD /VF 20x4 MAC40+ yes yes yes 65 150x170x33 LCD 16x2 MAC 12 yes yes yes yes 65 96x72x36 LCD 16x2 MAC10 yes yes yes 65 96x72x36 LCD 16x1 FX-20DU-E yes 54 120x174x44 tLED 11+4 FX-10DU-E yes 54 92x115x26 tLCD 16x2 t Backlit Display ` Subject to Verification A , Colour LCD 40x MAC E710 yes yes yes yes yes yes yes yes yes 65 212x198x87 Colour LCD 40x MAC 90 yes

Abstract: 16x2 LCD Panel Display optrex lcd display 16x2 16x2 Text LCD Datasheet Lcd 16x2 16x2 Dot Matrix Character Display Driver driver lcd 16x2 lcd module 16x2 16x2 lcd VT100 manual

Text: (or equivalent) 16x2 -character LCD panel. Device drivers are provided in the HAL system library for , LCD ( 16x2 , Optrex 16207). The LCD controller does not have any user-configurable settings. The only , terminal-like behavior on a miniature scale for the 16x2 screen. Characters written to the LCD controller are , Altera Corporation Chapter 10, Optrex 16207 LCD Controller Core For information about the revision , Altera Corporation 10. Optrex 16207 LCD Controller Core NII51019-7.1.0 Core Overview The

Text: min= precisi0n max.= î^q^ precision REV. PART NUMBER LCR-U01 602DSF/D-WH 16x2 CHARACTER LCD , min= precisi0n max.= î^q^ precision REV. PART NUMBER LCR-U01 602DSF/D-WH 16x2 CHARACTER LCD , your soldering process. Creating LED and LCD Solutions Together 290 E. HELEN ROAD PALATINE, IL , LEVEL FUNCTION 1 Vss - POWER SUPPLY GND (OV) 2 Vdd - 5V 3 Vo - FOR LCD DRIVE 4 RS H/L REGISTER , DIAGRAM\ 16 x 2, 1/16 DUTY, 1/5 BIAS VDD-Vo: LCD DRIVING VOLTAGE VR: 10Kn-20Kn item symbol condition

Abstract: 16X2 LCD DISPLAY IEC1107 IEC-1107 transformer protection based microcontroller Digital Frequency Meter with LCD Display display 16x2 SALEM 16X2 LCD trivector meter

Text: accuracy of the time maintained by the meter. A 16x2 LCD display along with two external buttons enables , computed parameters along with the parameter index are displayed by the micro-controller on a 16x2 LCD , 12bit ADC with delay equalization on sampled data in software · Measurements displayed on a 16x2 LCD display and stored in Flash memory · True RMS measurement of all phase voltages and line , performs data management and peripheral control. · Harmonic Analysis optional LCD DISPLAY LCD

Abstract: 16 pin diagram of lcd display 16x2 hd44780 16x2 lcd keypad 4x4 24 pin diagram of lcd display 16x2 LCD ASCII CODE 16x2 16 pin diagram of HD44780 lcd display 16x2 display 16x2 lcd 16x2 instruction set 4x4 keypad to bcd

Text: , and the Character LCD module. Keypad (4x4) eZ80F91 MCU Port B Port C LCD Display ( 16x2 , DB6 13 DB5 12 DB4 11 RS Character LCD Module ( 16x2 ) 4 RD 6 WR 3 , Module 4x4 Keypad 16x2 Character LCD Module fitted with a Hitachi HD44780 controller Test Procedure , (RTC_parm1.SetGMTTimeClock); // String is centralized on 16x2 LCD only LCD_clear_flg=1; } else { if(LCD_clear_flg , 16x2 LCD only AN018801-0404 Appendix C-Source Code Application Note An RZK Application

Text: LCM-S01 602DWF/B-B 16x2 CHARACTERS LCD MODULE, FSTN, TRANSFLECTIVE, ONE CHIP BLUE LED BACKLIGHT, 1/16 , REV. PART NUMBER LCM-S01 602DWF/B-B 16x2 CHARACTERS LCD MODULE, FSTN, TRANSFLECTIVE, ONE CHIP BLUE , . SYMBOL LEVEL FUNCTION 1 Vss - POWER SUPPLY GND (OV) 2 Vdd - 5V 3 Vo - FOR LCD DRIVE 4 RS H/L , MODE. A - ANODE LED BACKLIGHT K - CATHODE LED BACKLIGHT VDD-Vo: LCD DRIVING VOLTAGE VR , -RS-Vss -VDD -Vo- A-K- LCD CONTROLLER LSI & DRIVER SEG 80 l COM 16 LCD PANEL LED BACKLIGHT Vdd