160 x 128 tft display quotation

Phoenix Display InternationalPDI018QCTH-11 is a small-size 1.77” color TFT liquid crystal display (LCD) with a module size of 40.77mm x 36.20mm x 2.20m and active area of 35.28mm x 27.71mm.

All our outdoor color displays products can be modified to add touch panels or removed upon request (there may or may not be tooling associated with touch-panel changes).

We are changing our TFT part numbers to have them better describe the parts being ordered. The change should be complete for all TFT modules shipping within the next six months.

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

The DT018ATFT does not support 4-Wire SPI (also known as "4-line Serial Interface Protocol", 8-bit data, which includes a separate D/C signal line). DT018ATFT does not support this since the signal in ILI9163C datasheet called "SPI4" is hard coded to 0. However, a custom version of the FPC can be tooled to expose the proper 4-Wire SPI signals - please contact us for more details.

The provided display driver example code is designed to work with Microchip, however it is generic enough to work with other micro-controllers. The code includes display reset sequence, initialization and example PutPixel() function.

This lovely little display breakout is the best way to add a small, colorful, and bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available! The 1.8″ display has 128×160 color pixels. Unlike the low-cost Nokia 6110 and similar LCD displays, which are CSTN type and thus have poor color and slow refresh, this display is a true TFT! The TFT driver (ST7735R) can display full 18-bit color (262,144 shades!). And the 1.8 Inch SPI 128×160 TFT LCD Display Module will always come with the same driver chip so there are no worries that your code will not work from one to the other. The breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as an ultra-low-dropout 3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic. It features a microSD card holder so you can easily load full-color bitmaps from a FAT16/FAT32 formatted microSD card.

Here"s a very cool TFT LCD display with 128 x 160 resolution and 18-bit color depth. The most unique feature of the screen is the ability to read back the display memory across the bi-directional data lines. This solves a big problem with most displays - the need for a lot of memory to create effects like transparency or overlapping windows. This is an ideal component to include in your next custom project to advance your embedded hardware/software skills.

The reason that we"re reselling this part rather than using it on a new product is because of a misunderstanding about the interface details. It uses a 3-wire SPI interface with 9-bit transfers. The first bit is used to indicate if the following byte is data or a command. While 9-bit transfers are supported by many modern microcontrollers (like the K66 or STM32 families), making that work with vanilla Arduino is unlikely to happen any time soon. Since SparkFun products need out-of-the-box support for Arduino the interface had to be restricted to bit-banging - just too slow for a display with this resolution!

So we"re handing off this cool part to people willing to stretch their comfort level and move beyond basic Arduino functionality. Using a modern microcontroller of your choice and taking advantage of 9-bit SPI transfers - or a full parallel bus - you can unlock the full power of this display. Not only are we giving this to you at the cost you"d expect from a manufacturer but we"re passing along some of the work we"ve done so far: You can find the mating FPC connector here and some SW/HW work in the documents tab.

Elite Tree Technology founded in 2013, is engaged in the designing, producing, marketing and selling of various types of small to medium sized liquid crystal displays(LCD) and liquid crystal display modules (LCM), TFT Display, Backlight LED, Resistance and Capacitive Touch Screen.

ASI-T-17711A1SPN/D is a 1.77 inch transflective TFT with a resolution of 160 x 128, SPI interface and with a brightness of 110 Nits; viewable in direct sunlight.

ASI-T-20043A5PMN/AY is a 2.0 inch TFT with a resolution of 480 x 360, 3W SPI+16 bit RGB or MIPI interface, IPS all view, with a high brightness of 500 Nits.

ASI-T-240DA8BN/D is a 2.4 inch high brightness TFT with a resolution of 240 X 320, CPU 16-bit interface and with a brightness of 800 Nits; viewable in direct sunlight.

ASI-T-240DA10SMN/AQ is a 2.4 inch high brightness TFT with a resolution of 240 x 320, SPI & MCU interface, IPS all-angle view and with a brightness of 1000 Nits; viewable in direct sunlight. It also features an extra wide operating temperatures of -30 to +80C; perfect for extreme environmental applications.

ASI-T-240DAKBN/D is a 2.4 inch high brightness TFT with a resolution of 240 x 320, MCU interface and with a brightness of 1000 Nits; viewable in direct sunlight.

ASI-T-283DAKCRN/A is a 2.83 inch high brightness TFT with a resolution of 240 x 320, CPU, RGB, SPI interface and with a brightness of 1000 Nits; viewable in direct sunlight

ASI-T-3501RA1EN/A is a 3.5 inch TFT with a resolution of 480 x 640, 18 bit RGB, All View interface and with a brightness of 120 Nits; viewable in direct sunlight

ASI-T-3501RA1EN/D is a 3.5 inch TFT with a resolution of 480 x 640, 18-bit DBI Type B, All View interface and with a brightness of 120 Nits; viewable in direct sunlight

This 128x160 resolution LCD TFT is a standard display with 8-bit Parallel interface and offers a 6:00 optimal view. This 2.8V Liquid Crystal Display has a built-in ILI9163V controller, hot-bar soldering connection, is RoHS compliant and has a 4-wire resistive touchscreen.

Enhance your user experience with capacitive or resistive touch screen technology. We’ll adjust the glass thickness or shape of the touch panel so it’s a perfect fit for your design.

Choose from a wide selection of interface options or talk to our experts to select the best one for your project. We can incorporate HDMI, USB, SPI, VGA and more into your display to achieve your design goals.

Equip your display with a custom cut cover glass to improve durability. Choose from a variety of cover glass thicknesses and get optical bonding to protect against moisture and debris.

I have worked around my issue with the display in a fashion that I didn"t think possible with my lack of knowledge. So, the following is for people who experience the same problem or are just interested in the matter (conclusion at the bottom):

After searching for many, many different ways of describing my problem on Google, I came across this page on the Arduino forums of someone who had a completely different issue. However, Google found some text embedded in some code posted on that particular page (1.8" 128x160 SPI TFT LCD Display white screen - Displays - Arduino Forum), which had nothing to do with that problem, but was helpful for me:

Now I don"t have this particular display, but the description of the problem showed similarities to mine. And there was some sort of solution there as well. However, being the n00b I am, I understood next to nothing. I did give me the insight though, that I should try to make a workaround within the libraries that I will use in my programs. This way, I don"t have to add extra code within the programs to shift the dimensions, and I can also download other programs and run them just fine with my altered libraries.

To make sure my display wasn"t actually defect, I first looked for the option to broaden the resolution specifications, so I could see the pixels work. Instead of the usual 160x128 resolution, I compensated for the deviation with a resolution of 161x130: now all the pixels lit up as they should: no defect.

However, this solution would mean constantly accounting for a weird resolution which would make developing programs much more difficult than needed, since I would have to constantly remind myself of that odd resolution. Plus, there would always be extra columns and rows that recieved some computing, which would limit the speed of the Arduino. So I looked further in the libraries to find the place where the (0,0)-coordinates were defined.

The problem wasn"t actually a problem within the files, so I suspect that there is indeed an alignment issue with my display. But I found the code within it, which I changed so that the starting point of the drawing shifted. After looking through all the libraries within the TFT folder (meaning: the TFT library, AdafruitGFX library and Adafruit ST7735 library) and trying to understand as much as I could, I found the location: within the Adafruit_ST7735.cpp file, there is code of the "Adafruit_ST7735::commonInit(...)" function. This function defines the value of "colstart" and "rowstart" as 0. I changed it to correspond with my deviation.

A TFT display resolution can be configured within Adafruit_ST7735.cpp within the Gcmd[] array within the Adafruit_ST7735::writecommand(...) function. The other arrays in that function can also be configured, but TFT.cpp specifically states that a TFT display is configured according to the Gcmd[] array. I don"t remember if it is necessary, or if I just added the following because I changed, tried and errored so much, but I also added the corresponding values to the "_width" and "_height" within the TFT.cpp file.

The origin of a TFT display can be configured within Adafruit_ST7735.cpp within the "Adafruit_ST7735::commonInit(...)" function. Changing the values of "colstart" and "rowstart" will change the row and column of the origin. By standard, they are both defined as 0 (-> colstart = rowstart = 0;), but writing them as two different definitions makes it possible to set a virtual origin, relative to the misaligned origin of the display.

Here"s a very cool TFT LCD display with 128 x 160 resolution and 18-bit color depth. The most unique feature of the screen is the ability to read back the display memory across the bi-directional data lines. This solves a big problem with most displays - the need for a lot of memory to create effects like transparency or overlapping windows. This is an ideal component to include in your next custom project to advance your embedded hardware/software skills.

The reason that we"re reselling this part rather than using it on a new product is because of a misunderstanding about the interface details. It uses a 3-wire SPI interface with 9-bit transfers. The first bit is used to indicate if the following byte is data or a command. While 9-bit transfers are supported by many modern microcontrollers (like the K66 or STM32 families), making that work with vanilla Arduino is unlikely to happen any time soon. Since SparkFun products need out-of-the-box support for Arduino the interface had to be restricted to bit-banging - just too slow for a display with this resolution!

So we"re handing off this cool part to people willing to stretch their comfort level and move beyond basic Arduino functionality. Using a modern microcontroller of your choice and taking advantage of 9-bit SPI transfers - or a full parallel bus - you can unlock the full power of this display. Not only are we giving this to you at the cost you"d expect from a manufacturer but we"re passing along some of the work we"ve done so far: You can find the mating FPC connector here and some SW/HW work in the documents tab.

The 1.8" display has 128x160 color pixels. The TFT driver (ST7735) can display full 18-bit color. The breakout has the TFT display soldered on (it uses a delicate flex-circuit connector)

In the above example, Node32-Lite and this 1.8-inch LCD.  Please refer to the tutorial here: ST7735S interfacing with ESP32 to make the connections, Arduino library installation, and modification needed for it to works on this LCD.