flysky fs-it4s 2.4ghz lcd touch screen made in china

Although many RTR’s come with some pretty good radio systems in comparison to radios of years past, there is always room for improvement. You may want more adjustability from your radio, more channels to operate accessories or maybe just and LCD screen so you can visually see some of the adjustments your making. Yes, it’s not long before many look for a radio upgrade. If you’re on the hunt for a new transmitter, take a look at the FlySky FS-GT5. Redcat Racing reached out to us to see if we wanted to try this new radio now that they are the North American distributor for FlySky products. The radio looked interesting to us and it’s list of features and functions rather long. So we took them up on their offer so we could show you this radio as we checked it out too. Dean goes over the new radio and gives it a quick test with a few of the cars in his fleet.

This Flysky FS-NB4 2.4G 4 channels transmitter have stable performance, superior look and feel, with a color screen. Product to be dedicated for competitive use. Suit for RC boat and RC car.

1. To avoid the 2.4Ghz radio signal interference. Please always keep your model in sight and within 300m and make sure there is no other signals around, cause they may block the RF signal and lead to loss of control.

3. Do not touch any part of the model that may generate heat during operation, or immediately after use. The engine, motor or speed control may be very hot and can cause serious burns.

Price - I"m sure there are cheaper radios out there, but I seriously doubt they would match the quality of the Graupner radios. For example, Flite Test currently has the Graupner MZ-12 with two receivers included for 144.99, and the Spektrum DXe Transmitter for $89.99. It doesn"t look like the DXe comes with a receiver and does require that you buy a programming cable. In addition there is no screen on the transmitter.

The FlySky FS-NB4 Noble is FlySky newest, fastest and most stylish ground transmitter to date. Not only does it look great with its new sleek design and metal finish, it also features new flexibility and functionality never seen before in the RC world.

This Flysky FS-NB4 2.4G 4-8 channels transmitter have stable performance, superior look and feel, with a color screen. Product to be dedicated for competitive use. Suit for RC boat and RC car.

1. To avoid the 2.4Ghz radio signal interference. Please always keep your model in sight and within 300m and make sure there is no other signals around, cause they may block the RF signal and lead to loss of control.

3. Do not touch any part of the model that may generate heat during operation, or immediately after use. The engine, motor or speed control may be very hot and can cause serious burns.

4. Quality issues – What to do if you find a problem with your radio? E.g. damaged switches, buttons, antennas, etc., poor touch response or other screen issues, not booting etc.

If the seller does not want to take any action, please contact Flysky via our email address with the product model number, product problem, product serial number and order information and seller information (product model, product serial number, order information, please provide pictures, provide and records of communication with seller)

6. What should I do if the remote control is damaged? If the potentiometer, button switch, antenna, screen, etc. are damaged during use, the remote control or receiver power supply is connected incorrectly or reversely burned out.

For power problems domestic users can contact Flysky’s after-sales service for factory repair; foreign users are advised to abandon repairs if they do not have overseas service points and cannot repair themselves.

If you need to update, please check the latest firmware of the remote control on the Flysky website. If your firmware version is lower than the official version, please check the “Software Version Update Record” to confirm whether you need to upgrade.

You can download it from the official website product page or download it from github at https://github.com/open-flysky/FLYSKY-ProductInformationDownload.

Please check the surrounding environment for interference. If there is a mobile phone base station, a high-power router, a 2.4GHz high-power wireless device, etc., nearby it is likely to cause some interference.

If you cannot solve the issue please contact the seller to go through the after-sales process; if the seller does not process, please contact Flysky via email with the product model, product problem, product serial number and order information and seller information (product model, product) Please provide the image of the serial number and order information, and provide the communication record of the seller and the seller.)

Different radios have different settings for the failsafe function. Radios that have a screen can be set up on the radio itself. Radios without a screen must be set up with the receiver. The specific method is subject to the manual.

If the gimbal is not operating as expected it may need to be calibrated. If the radio has a screen it can be calibrated via the radio itself in settings. If the radio does not have a screen a key combination will activate calibration mode. Refer to the radio’s user manual for more information.

The receiver has two types of interfaces for outputting PPM signals. Class 1 is a sticker or PCB silk screen labeled PPM interface. This interface only outputs PPM signals; Class 1 is a receiver labeled PPM/CH1 or P/CH1. It is necessary to set the signal type to PPM through in the radio settings to output the PPM signal (generally under the receiver setup menu, refer to the manual).

If you need more information Flysky products such as schematics (limited open source products), component model numbers, certifications, ibus information, etc., you can send us an email with the subject of the message clearly indicating the needs and uses.

In addition to PL18, other Flysky product require the opening of the radio to switch the left and right gimbals. For details, please refer to the products user manual.

FlySky FS-GT2 2.4G 2CH Gun TransmitterFS-GT2 has revolutionized the way people experience RC, and now this radio transmitter can stand up to the top competitions. Channels: 2Channels; Model type: Car/boat; RF Power: less than 20dbm; Modulation: GFSK; Code type: Digital; Sensitivity:1024; Low voltage warning: yes(less than 9w); DSC port: yes (3.5mm); Charger port: yes; Power:12V…

FrSKY ACCST technology is proven, approved by many model associations, tested and reviewed as the leading Chinese 2.4Ghz R/C Technology. If you think DSM2 or FASST is the best, think again!New FrSKY ACCST (Advanced Continuous Channel Shifting Technology) gives you secure radio communicatios in 2.4Ghz band. ACCST 2.4GHz system shifts 80 channels around hundred times…

FrSKY ACCST technology is proven, approved by many model associations, tested and reviewed as the leading Chinese 2.4Ghz R/C Technology. If you think DSM2 or FASST is the best, think again! New FrSKY ACCST (Advanced Continuous Channel Shifting Technology) gives you secure radio communicatios in 2.4Ghz band. ACCST 2.4GHz system shifts 80 channels around hundred times per second in…

27176 FrSky TFR4 SB 3/16ch 2.4Ghz S.BUS Receiver FASST Compatible (with SB ports)Compatibility:• FASST 2.4G Air Systems (7CH Mode/Multi Mode): 6EX, 7C, TM-7, TM-8, T8FG, T10C, TM-10, T10CG, T12Z, T12FG, TM-14, T14MZ, etc..• FASST 2.4G Surface Systems (C1 Mode): 3PK, 4PK, etc..• Compatible servos via SB port: Futaba S.BUS servos, FrSky D12MB servoFeatures:• Compatible with…

FrSky TFR8 SB 8ch 2.4Ghz S.BUS Receiver FASST Compatible (with RSSI & SB ports) Compatibility:FASST 2.4G Air Systems (7CH Mode/Multi Mode): 6EX, 7C, TM-7, TM-8, T8FG, T10C, TM-10, T10CG, T12Z, T12FG, TM-14, T14MZ, etc..Features:• Compatible with FASST 2.4GHz Air Systems (7CH Mode/Multi Mode).• SB port is compatible with Futaba S.BUS servos and FrSky servo D12MB. No…

FrSky has just released their new 16 Channel X8R receiver with XJT module combo! (8 normal PWM outputs and all 16 channels on the dedicated S.BUS output) FrSKY ACCST technology is proven, approved by many model associations, tested and reviewed as the leading Chinese 2.4Ghz R/C Technology. If you think DSM2 or FASST is the…

This is the Futaba R2106GF 2.4GHz FHSS 6-Channel Micro Receiver. FEATURES: Compatible with all Futaba FHSS/S-FHSS transmitters **Not compatible with FASST systems** Normal and High-Speed Modes: Normal mode frame rate is (FHSS/S-FHSS) 13.63ms and accepts any type of servos or peripherals. High-Speed mode (in 4PL tx only), with an output of 6.8ms accepts digital servos…

This is the Futaba R617FS 2.4GHz FASST 7-Channel Park Flyer to Giant Scale Aircraft Receiver. FEATURES: High sensitivity receiver weighs only .25oz (7g) without case yet is a full range system for all aircraft from giant scale to park flyer applications-no need to buy separate receiver for specific aircraft Simple one-touch linking – no plugs…

This is the Futaba R6303SBE FASST 2.4GHz Micro Receiver. FEATURES: For use with park flight or indoor use airplanes and small electric helicopters up to 39.4″ (1000mm) main rotor diameter S.BUS system output port with three conventional channel outputs Compatible with S.Bus and conventional system servos and gyros Automatic FASST 2.4GHz 7-ch mode or 8ch/10ch/Multi-channel…

The OrangeRX 2.4Ghz transmitter module offers a simple, convenient and inexpensive way to utilize your module-based Futaba compatible transmitter. Unlike standard modules which have a fixed protocol this unit can be use for DSM2 (1024/22ms, 2048/11ms), DSMX (22ms, 11ms) protocol.

Extend your range and increase your link robustness with the OrangeRx satellite receiver. Spec: Frequency: 2.4Ghz DSSS (DSM2 Compatible) Size: 21x14x2mm Wire Length: 210mm Warranty. 12 Month replacement guarantee! Included. OrangeRx OrangeRx R100 Satellite Receiver NOTE i) This is not a Spektrum product, nor is it a copy of a Spektrum product. The Spektrum brand is a…

38394   Extend your range and increase your link robustness with the OrangeRx satellite receiver. This is the long antenna version making it ideal for larger models and for gliders with carbon fiber fuselages. The extra length of the antennae allow you to route them outside of the model. Spec:Frequency: 2.4Ghz DSMXSize: 27x19x10mmWire Length: 210mmAntennae…

Ever wished your Turnigy 9X transimitter had a backlit LCD?Wish no more! the Turnigy 9X LCD backlight kit is here!Other solutions require soldering or use a noisy inverter, voiding CE and warranty. However the Turnigy LCD Backlight Kit is LED driven and is a snap to install! No soldering is required, you can do this…

The GT3B is an improved version of the GT3 V3 from FlySky.  See my related posts in the bottom of this review.  It uses the same receivers (RX) as the GT3 V3 as well.  It finally features a backlit LCD screen, a must have for any radio in my opinion. I also like how the screen is on top instead of the side for easy access.  It’s no longer modular based.  A good and bad thing I think.  With the original GT3, you can use any JR compatible module from FrSky, Corona, Assan, Spektrum, etc.  You’re stuck with FlySky 2.4Ghz unless you do some serious hacking on the GT3B.

Also like the GT3 V3, it features frequency hopping.   Every manufacturer calls it something different.  Futaba calls it FAAST.  FlySky calls it AFHDS.  Frequency hopping is good in that the signal is spread across multiple channels within the 2.4Ghz band.  So if one channel has interference, it merely hops to other channels to communicate.  The earlier GT3 (V1) and other FlySky radios only had one channel in the 2.4Ghz band to use.  Which was not good because if there was strong interference in that particular frequency that it was using, you can lose signal. So it’s now in the same league as Futaba/FrSky/Hitec, when it comes to using FHSS (frequency hopping spread spectrum).  Even Spektrum/JR’s DSM2 system doesn’t have FHSS