beaglebone black lcd display manufacturer

The 4D 4.3” LCD CAPE is a cape specifically designed for the Beagle Bone Black (BBB), and provides a 4.3” display for the BBB for direct user interaction and information display.

The 4D 4.3” LCD CAPE features 7 push buttons below the screen, LEFT, RIGHT, UP, DOWN, ENTER, RESET and POWER, along with 2 LED’s to indicate Power and User Status (normally heartbeat).

And here"s the repo with the dts file along with some notes on how to get it working with that image: https://github.com/JamesHagerman/4D-7in-LCD-Cape-Fixes-for-3.12

BeagleBone® Black is a low-cost, high-expansion, community-supported development platform for developers and hobbyists. Users can boot Linux in under 10 seconds and get started on development in less than 5 minutes with just a single USB cable. Like its predecessors, the BeagleBone® Black is designed to address the Open Source Community, early adopters, and anyone interested in a low cost ARM® Cortex™-A8 based processor. It has been equipped with a minimum set of peripherals to allow the user to experience the power of the processor and also offers access to many of the interfaces and allows for the use of add-on boards called capes, to add many different combinations of features. A user may also develop their own board or add their own circuitry.

NHD-7.0CTP-CAPE-N | BeagleBone Black Cape with TFT Display | 7.0" Sunlight Readable LCD | Capacitive Touchscreen | EEPROM with On-Board Dip Switches | Developing with Android & Linux

Engineered in Elgin IL USA, we designed this BeagleBone Cape to be a perfect fit for our 7.0” TFT displays and upgraded it with the sunlight readable NHD-7.0-800480EF-ASXN#-CTP display model. With capacitive 5-point multi-touch functionality and 800x480 resolution screen, this cape works seamlessly while developing with operating systems like Android and Linux. It includes an on-board dip switch for configuring EEPROM and secondary headers for additional cape connections. In addition to the secondary cape slot, we added four 3.5mm mounting holes that are compatible with standard M3 screws, a reset button, write protection pins, PWM backlight control, and an LED power indicator. With this cape we’ve made it easy to take your design process from concept to reality. When paired with the BeagleBone Black board (sold separately by beagleboard.org) you’ll have everything you need to plug-in and start developing.

Choose from a wide selection of interface options or talk to our experts to select the best one for your project. We can incorporate HDMI, USB, SPI, VGA and more into your display to achieve your design goals.

Equip your display with a custom cut cover glass to improve durability. Choose from a variety of cover glass thicknesses and get optical bonding to protect against moisture and debris.

This 7" touchscreen cape creates a fully integrated system when combined with your BeagleBone Black. Provides full Angstrom support for easy BeagleBone prototyping and projects. A secondary set of header pins gives built-in stacking cape-ability.

The 4DCAPE-43 is specifically designed for the Beagle Bone Black (BBB), which provides a 4.3” display for the BBB for direct user interaction and information display. Available in both touch (4DCAPE-43T) and non-touch (4DCAPE-43), the CAPE conveniently features a 4.3” TFT LCD 480x272 resolution display and seven push buttons.

The Beagle Bone Black connects directly to the back of the 4DCAPE-43, and provides everything the CAPE requires such as power and display signals. It also includes 4 mounting holes for easy panel/enclosure mounting. Please note that the 4DCAPE-43 is designed to be the primary display for Beagle Bone Black only and cannot be programmed using 4D Systems" Workshop 4 IDE.