raspberry pi 2.2 tft lcd price

The PI-TFT22A module features a 2.2"display with 320x240 16-bit color pixels. This PI-TFT22A module refresh it"s screen rapidly because the TFT module communicates with raspberry Pi in a high speed SPI interface ,this PI-TFT22A module can be used as Xwindow port ,displaying images or video etc. it plugs right in on top of your Model A+, B+ or Pi 2 and fits as HAT.

You can download configuration-free image or configurable packages, adjustable brightnes [level 0 -255], HAT compatible and Onboard buttons, you can load kernel modules to support GPIO KeyBoard function, almost all GPIO available on this board [non SPI 0,GPIO 18,GPIO 24,GPIO23],Very easily be other uses, IDROM has built initialization data to support Device Tree boot

This lovely little display breakout is the best way to add a small, colorful, and bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available!

The 2.2" display has 320x240 color pixels. Unlike the low-cost "Nokia 6110" and similar LCD displays, which are CSTN type and thus have poor color and slow refresh, this display is a true TFT! The TFT driver (ILI9341 or compatible) can display full 18-bit color (262,144 shades!). And the LCD will always come with the same driver chip so there are no worries that your code will not work from one to the other.

The breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as an ultra-low-dropout 3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic. We also had a little space so we placed a microSD card holder so you can easily load full-color bitmaps from a FAT16/FAT32 formatted microSD card. The microSD card is not included, but you can pick one up here.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!" - we"ve written a full open-source graphics library that can draw pixels, lines, rectangles, circles, text, and bitmaps as well as example code. The code is written for Arduino but can be easily ported to your favorite microcontroller! Wiring is easy, we strongly encourage using the hardware SPI pins of your Arduino as software SPI is noticeably slower when dealing with this size display. Check the example sketches for wiring help until we get a detailed wiring tutorial written!

This display breakout also features a 18-pin "EYESPI" standard FPC connector with flip-top connector. You can use a 18-pin 0.5mm pitch FPC cable to connect to all the GPIO pins, for when you want to skip the soldering.

As of November 2022 - we"ve updated this TFT breakout with a EYESPI connector to make cabling easier with an 18-pin FPC. We also used Adafruit Pinguin to make a lovely silkscreen. The board is otherwise the same size, pinout, and functionality.

It contains a bright 320 x 240 resolution TFT LCD display with resistive touch ability. Furthermore there are six buttons and an infra-red receiver LED to help build up useful user-interfaces.

Here at Pi Supply, we have our roots in the open-source and educational values provided by the open source community. The Raspberry Pi is such a fantastic educational tool, and these kits open up even more possibilities for anyone to learn about electronics and programming.

Inside this part of the shop you can find all the bits and pieces you need for your prototyping needs. Here you can kit out your maker station with tools and consumables, as well as other components such as headers, sensors and accelerometers to bring all those epic ideas to life!

Here you can find the range of everyone"s favourite single board computer! The revolutionary Raspberry Pi has brought more possibilities within the grasp of developers than ever before, and here you can get your hands on the board that will bring that next idea to life. The Raspberry Pi has come to us in many shapes and sizes, but whichever model you want or need, this platform is guaranteed to pack a punch!

Take a look at all the original products we have to offer here at Pi Supply! Whether you are looking for self-solder kits or fully assembled HATs, you can explore new horizons with Pi Supply, and do even more to unlock the potential of your Raspberry Pi. Check out our range for LED & IR toys, ePaper applications, power solutions and much more to expand your range of projects.

Waveshare 19579 - 1.8inch LCD Display Module For Raspberry Pi Pico, 65K RGB Colors, 160×128 Pixels, SPI Interface Raspberry Pi Pico is NOT included. Features 160×128 resolution, 65K RGB colors, clear and colorful displaying effect SPI...

The cute PiTFT got even more adorable with this little primary display for Raspberry Pi in HAT form! It features a 2.2" display with 320x240 16-bit color pixels. The HAT uses the high speed SPI interface on the Pi and can use the mini display as a...

We"ve sourced a new LCD screen especially for our Pico Display Pack - it"s a lovely, bright 18-bit capable 240x135 pixel IPS display and fits the Pico...

800×480, 7.5inch E-Ink Display HAT For Raspberry Pi, SPI Interface Overview This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like...

Pi Supply has been working with Pervasive Displays to bring to market a HAT module, called the PaPiRus, for the Raspberry Pi that is capable of driving ePaper displays of various sizes with ease, making use of their existing open source RePaper codebase...

Raspberry Pi 4 Touchscreen 7″ Case – Black. This is the OneNiceDesign Touch Screen Case for the Official Raspberry Pi 7" touchscreen display and the Raspberry Pi 4.

PaPiRus Zero is an ePaper / eInk screen pHAT designed for the Raspberry Pi Zero and the new Raspberry Pi Zero W. It’s one of the first true low power displays for the Pi Zero mini computer. Since the launch of the original PaPiRus...

Is this not the cutest little display for the Raspberry Pi? It features a 2.8" display with 320x240 16-bit color pixels and a resistive touch overlay. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X...

If you"re looking for the most compact li"l color display for a Raspberry Pi B+, Pi 2, & Pi 3 (most likely a Pi Zero) project, this might be just the thing you need! The Adafruit Mini PiTFT - 135x240 Color TFT Add-on for...

All fans of Raspberry Pi perfectly understand the phenomenon of Raspberry, which has enthusiasts in many areas. It is used in everyday life, but also in robotics, programming and industry. Raspberry Pi is perfect for modern intelligent building systems. It can be expanded with various types of peripheral devices, acquiring specific features. Among them there are displays, which are available in our offer in different versions. They come in 0.9", 1.3", 1.44", 1.54", 2", 2", 2.13", 2.2", 2.4", 2.6", 2.7", 2.8", 3.2", 3.5", 4", 4.,2", 4.3", 5", 5.83", 7", 7.50", 10", 10.1", 11.1" and 14" screens. They also differ in the technology used, which ensures a specific image quality. We offer LED and OLED matrix displays, monochrome and segmented, consisting of LEDs, e-paper, alphanumeric displays as well as LCD IPS, LCD TFT. The displays work with boards using GPIO+DPI, HDMI, HDMI+GPIO, HDMI+USB, DSI, GPIO, I2C, SPI, SPI + I2C, as well as USB. The interface through which the screen connects to the Raspberry Pi module must be operable, otherwise there is a risk of interference and the connection quality will be poor.

We offer screens dedicated for special housings as well as modular laptops based on Raspberry Pi. If you use the display and your Raspberry frequently, an e-paper display is a good choice for you, which is more convenient for human eyesight. It has other advantages, it is very energy-efficient, consumes little energy, so it will be a good choice for those who are still looking for savings, while increasing the comfort of their daily life.

The displays can be used on a daily basis as well as for large robotics and electrical projects. They can be used for information purposes, displaying current data with the parameters of the specific equipment or system with which they work. This function is very often performed by monochrome and segment displays. Or maybe you would like to create your own e-book reader. You will need an energy-saving and eye-safe e-paper display. Touchscreens are very well suited for game controllers and drawing devices. The use of Raspberry Pi displays is therefore very wide.

Adjust the type of display to your design and purpose. Decide on the option that best matches your expectations and needs. Build your Raspberry Pi, make an ambitious project or simply use the Raspberry Pi as an alternative to your laptop or iconic PC.

Need a display screen for your next Raspberry Pi project? Check out our range of LCD, OLED, and eInk displays. We"ve got everything from capacitive touch screens, tiny crisp OLED screens, to eInk displays that are easy on your eyes or for power-saving applications.

It is the cutest display for the Raspberry Pi. It features a 3.5" display with 480x320 16-bit color pixels and a resistive touch overlay. It"s designed to fit nicely not only to the Pi Model A or B but also works perfectly fine with the Model B+/2B/3B/4B.

*When working with Raspberry Pi 4, for the system image of Raspberry Pi after 2021-10-30, for example on Bullseye, please modify "dtoverlay = vc4-kms-v3d" to "dtoverlay = vc4-fkms-v3d" in the config file, otherwise it may fail to start. But on Buster, please comment out "dtoverlay = vc4-fkms-V3D" by adding #.