macbook 12 inch lcd panel free sample

Affected devices were sold between October 2016 and February 2018. Apple or an Apple Authorized Service Provider will service affected MacBook Pro units, free of charge.

Please choose one of the options below for service. Your MacBook Pro will be examined prior to any service to verify that it is eligible for this program.

Note: If your MacBook Pro has any damage which impairs the service, that issue will need to be repaired first. In some cases, there may be a cost associated with the repair.

The program covers eligible MacBook Pro models for 5 years after the first retail sale of the unit or 3 years from the start date of this program, whichever is longer.

Typical LCDs are edge-lit by a strip of white LEDs. The 2D backlighting system in Pro Display XDR is unlike any other. It uses a superbright array of 576 blue LEDs that allows for unmatched light control compared with white LEDs. Twelve controllers rapidly modulate each LED so that areas of the screen can be incredibly bright while other areas are incredibly dark. All of this produces an extraordinary contrast that’s the foundation for XDR.

With a massive amount of processing power, the timing controller (TCON) chip utilizes an algorithm specifically created to analyze and reproduce images. It controls LEDs at over 10 times the refresh rate of the LCD itself, reducing latency and blooming. It’s capable of multiple refresh rates for amazingly smooth playback. Managing both the LED array and LCD pixels, the TCON precisely directs light and color to bring your work to life with stunning accuracy.

Many Apple products use liquid crystal displays (LCD). LCD technology uses rows and columns of addressable points (pixels) that render text and images on the screen. Each pixel has three separate subpixels—red, green and blue—that allow an image to render in full color. Each subpixel has a corresponding transistor responsible for turning that subpixel on and off.

Depending on the display size, there can be thousands or millions of subpixels on the LCD panel. For example, the LCD panel used in the iMac (Retina 5K, 27-inch, 2019) has a display resolution of 5120 x 2880, which means there are over 14.7 million pixels. Each pixel is made up of a red, a green, and a blue subpixel, resulting in over 44 million individual picture elements on the 27-inch display. Occasionally, a transistor may not work perfectly, which results in the affected subpixel remaining off (dark) or on (bright). With the millions of subpixels on a display, it is possible to have a low number of such transistors on an LCD. In some cases a small piece of dust or other foreign material may appear to be a pixel anomaly. Apple strives to use the highest quality LCD panels in its products, however pixel anomalies can occur in a small percentage of panels.

In many cases pixel anomalies are caused by a piece of foreign material that is trapped somewhere in the display or on the front surface of the glass panel. Foreign material is typically irregular in shape and is usually most noticeable when viewed against a white background. Foreign material that is on the front surface of the glass panel can be easily removed using a lint free cloth. Foreign material that is trapped within the screen must be removed by an Apple Authorized Service Provider or Apple Retail Store.

Laptop Screens & LCD Panels└ Laptop Replacement Parts└ Computer Components & Parts└ Computers/Tablets & NetworkingAll CategoriesAntiquesArtBabyBooks & MagazinesBusiness & IndustrialCameras & PhotoCell Phones & AccessoriesClothing, Shoes & AccessoriesCoins & Paper MoneyCollectiblesComputers/Tablets & NetworkingConsumer ElectronicsCraftsDolls & BearsMovies & TVEntertainment MemorabiliaGift Cards & CouponsHealth & BeautyHome & GardenJewelry & WatchesMusicMusical Instruments & GearPet SuppliesPottery & GlassReal EstateSpecialty ServicesSporting GoodsSports Mem, Cards & Fan ShopStampsTickets & ExperiencesToys & HobbiesTravelVideo Games & ConsolesEverything Else

Retina Display is a brand name used by Apple for its series of IPS LCD and OLED displays that have a higher pixel density than traditional Apple displays.trademark with regard to computers and mobile devices with the United States Patent and Trademark Office and Canadian Intellectual Property Office.

The Retina display has since expanded to most Apple product lines, such as Apple Watch, iPhone, iPod Touch, iPad, iPad Mini, iPad Air, iPad Pro, MacBook, MacBook Air, MacBook Pro, iMac, and Pro Display XDR, some of which have never had a comparable non-Retina display.marketing terms to differentiate between its LCD and OLED displays having various resolutions, contrast levels, color reproduction, or refresh rates. It is known as Liquid Retina display for the iPhone XR, iPad Air 4th Generation, iPad Mini 6th Generation, iPad Pro 3rd Generation and later versions,Retina 4.5K display for the iMac.

Apple"s Retina displays are not an absolute standard for display sharpness, but vary depending on the size of the display on the device, and at what distance the user would typically be viewing the screen. Where on smaller devices with smaller displays users would view the screen at a closer distance to their eyes, the displays have more PPI (Pixels Per Inch), while on larger devices with larger displays where the user views the screen further away, the screen uses a lower PPI value. Later device versions have had additional improvements, whether an increase in the screen size (the iPhone 12 Pro Max), contrast ratio (the 12.9” iPad Pro 5th Generation, and iMac with Retina 4.5K display), and/or, more recently, PPI count (OLED iPhones); as a result, Apple uses the names “Retina HD display", "Retina 4K/5K display", “Retina 4.5K display", "Super Retina HD display", “Super Retina XDR display”, and "Liquid Retina display" for each successive version.

When introducing the iPhone 4, Steve Jobs said the number of pixels needed for a Retina display is about 300 PPI for a device held 10 to 12 inches from the eye.skinny triangle with a height equal to the viewing distance and a top angle of one degree will have a base on the device"s screen that covers 57 pixels. Any display"s viewing quality (from phone displays to huge projectors) can be described with this size-independent universal parameter. Note that the PPD parameter is not an intrinsic parameter of the display itself, unlike absolute pixel resolution (e.g. 1920×1080 pixels) or relative pixel density (e.g. 401 PPI), but is dependent on the distance between the display and the eye of the person (or lens of the device) viewing the display; moving the eye closer to the display reduces the PPD, and moving away from it increases the PPD in proportion to the distance.

The displays are manufactured worldwide by different suppliers. Currently, the iPad"s display comes from Samsung,LG DisplayJapan Display Inc.twisted nematic (TN) liquid-crystal displays (LCDs) to in-plane switching (IPS) LCDs starting with the iPhone 4 models in June 2010.

The sort of rich, data-dense information design espoused by Edward Tufte can now not only be made on the computer screen but also enjoyed on one. Regarding font choices, you not only need not choose a font optimized for rendering on screen, but should not. Fonts optimized for screen rendering look cheap on the retina MacBook Pro—sometimes downright cheesy—in the same way they do when printed in a glossy magazine.

Raymond Soneira, president of DisplayMate Technologies, has challenged Apple"s claim. He says that the physiology of the human retina is such that there must be at least 477 pixels per inch in a pixelated display for the pixels to become imperceptible to the human eye at a distance of 12 inches (305 mm).Phil Plait notes, however, that, "if you have [better than 20/20] eyesight, then at one foot away the iPhone 4S"s pixels are resolved. The picture will look pixelated. If you have average eyesight [20/20 vision], the picture will look just fine... So in my opinion, what Jobs said was fine. Soneira, while technically correct, was being picky."

The first smartphone following the iPhone 4 to ship with a display of a comparable pixel density was the Nokia E6, running Symbian Anna, with a resolution of 640 × 480 at a screen size of 62.5mm. This was an isolated case for the platform however, as all other Symbian-based devices had larger displays with lower resolutions. Some older Symbian smartphones, including the Nokia N80 and N90, featured a 2.1 inch display at 259 ppi, which was one of the sharpest at the time. The first Android smartphones with the same display - Meizu M9 was launched a few months later in beginning of 2011. In October of the same year Galaxy Nexus was announced, which had a display with a better resolution. By 2013 the 300+ ppimark was found on midrange phones such as the Moto G.Samsung Galaxy S4 and HTC One (M8) had 1080p (FHD) screens around 5-inches for a 400+ PPI which surpassed the Retina density on the iPhone 5. The second major redesign of the iPhone, the iPhone 6, has a 1334 × 750 resolution on a 4.7-inch screen, while rivals such as the Samsung Galaxy S6 have a QHD display of 2560 × 1440 resolution, close to four times the number of pixels found in the iPhone 6, giving the S6 a 577 PPI that is almost twice that of the iPhone 6"s 326 PPI.

The larger iPhone 6 Plus features a "Retina HD display", which is a 5.5-inch 1080p screen with 401 PPI. Aside from resolution, all generations of iPhone Retina displays receive high ratings for other aspects such as brightness and color accuracy, compared to those of contemporary smartphones, while some Android devices such as the LG G3 have sacrificed screen quality and battery life for high resolution. Ars Technica suggested the "superfluousness of so many flagship phone features—the move from 720p to 1080p to 1440p and beyond...things are all nice to have, but you’d be hard-pressed to argue that any of them are essential".

Due to the peculiar diamond Sub-Pixels layout found in the iPhone X, iPhone XS and iPhone XS Max, the actual density of the Red and Blue Sub-Pixels is lower than that of the Green Sub-Pixels, being reportedly 324 Sub-Pixels per inch.

I have a macbook pro 13” 2017. The keyboard is messed up and under an apple recall, but when that happened, the display also started to flicker and have colored bands. Took it to apple, and even though it is 1.5 years since I purchased (half a year over their warranty), they would not fix the display for free. The keyboard, as I said was covered.

I had a 2017 13” MacBook Pro. The keyboard was messed up, replaced twice and started to mess up again. Also, I had horizontal lines that completely distorted the screen. I had to pay to have the screen replaced (about $300 from apple). About a month later when the keyboard started messing up again, and I was getting flickering, I discussed the issues with a customer support SUPERVISOR (don’t bother with the underlings). After much back and forth, he admitted that I had a lemon. I demanded a new MacBook Pro, and they agreed.

There have been a number of issues with Apple’s MacBook models over the years. In some cases Apple has service programs where it will fix your MacBook for free, in other cases the Macs have been recalled by Apple due to safety issues.

reports of cracked screens from M1 MacBook owners. Some users have claimed that the screen of the computer has inexplicably and all of a sudden cracked. Reports have been shared on

Certain MacBook Pro models have been banned from flights following Apple’s recall of certain models sold between September 2015 and February 2017. Some of these MacBook Pro models are fitted with batteries that “may overheat and pose a fire safety risk,” according to Apple.

The US Federal Aviation Administration has alerted airlines to the recall. This means that if you are flying to or inside America, you won’t be able to take a recalled MacBook Pro on as carry-on luggage, nor will you be able to check it in as cargo.

Various airlines managed by Total Cargo Expertise, including TUI Group Airlines, Thomas Cook Airlines, Air Italy, and Air Transat, have implemented a complete ban on these laptops, with employees told: “The 15in Apple MacBook Pro laptop, sold between mid-2015 and February 2017 is prohibited on board any of our mandate carriers.”

It’s not only the 15in MacBook Pro that is affected by a battery issue. Apple has also indicated that the battery inside the 13in MacBook Pro can also expand – although this is considered less of a risk than the 15in issue.

The no fly ban relates to Apple’s 20 June 2019 voluntary recall of some 15in MacBook Pro units which contain a battery that may overheat and pose a safety risk, according to the company.

In a press release the company stated that: “Because customer safety is a top priority, Apple is asking customers to stop using affected 15-inch MacBook Pro units.”

website) suggests that a component in certain 13in MacBook Pro may fail “causing the built-in battery to expand”. That sounds a bit concerning, but Apple says it is not a safety issue.

If you own a 15in MacBook Pro unit purchased between September 2015 and February 2017 – known as MacBook Pro (Retina, 15-inch, Mid 2015) – it may be part of the battery recall. You’ll be able to identify whether it’s included in the recall by the serial number which can be found by clicking on the Apple Logo and choosing About This Mac.

As for the 13in MacBook Pro, the issue is with non-Touch Bar units manufactured between October 2016 and October 2017. You can enter your serial number on Apple’s

As of May 2019 Apple has been running a backlight service program for 13in MacBook Pro purchased between October 2016 and February 2018. This includes the MacBook Pro from 2017.

The problem was caused by a flex cable that is too short. MacBook Pro models manufactured after 2018 are unaffected because a longer flex cable was used.

The problem was related to the design of the keyboard of these MacBook laptops. The so called Butterfly design meant that dust could get trapped under the keys causing keys to stop working. The problem was that the whole keyboard needed to be replaced to rectify the problem.

Non Touch Bar models of the 13in MacBook Pro sold between June 2017 and June 2018 could be affected by an issue with the SSD that might cause you to lose valuable data.

Apple has stated that “a limited number of 128GB and 256GB solid-state drives (SSD) used in 13in MacBook Pro (non Touch Bar) units have an issue that may result in data loss and failure of the drive.”

The issue applies to 13in MacBook Pro units sold between June 2017 and June 2018. Apple has emailed those with affected models – assuming that they were registered with Apple.

Shortly after the 2016 MacBook Pro got into users’ hands, reports of loud crackling and popping noises through the speakers started to appear on community forums. It was initially thought that, the noises only occurred if the user boots into Microsoft Windows using Boot Camp. However, one Macworld reader has commented that:

“I have a 2017 MacBook Pro and I had speakers replaced 2 times due to them popping. And I had not installed Windows, it all happened in MacOS. So it is 100% a hardware issue and not Boot Camps fault.”

Some users even reported that their MacBook Pro speakers were permanently damaged by the noises when Windows was booted, which subsequently meant the speakers no longer worked then they booted back into macOS. The right speaker in particular seems to be affected in this way.

“The crackling noise is noticeable after a few minutes whilst listening to audio files or YouTube type of websites,” claimed one Reddit poster who had his new MacBook Pro replaced and found that the issue remained. He suspects that it’s the drivers. Other posters suspect that it’s a firmware issue.

You could also ensure that headphones are attached via the 3.5mm audio jack before using Boot Camp to boot into Windows, as this will avoid the MacBook Pro’s speakers being used. The crackling/pops will not be heard in the headphones. Notably, users affected by the issue report that simply turning the volume control down has no effect; the loud crackling and pops continue.

A “small percentage” of MacBook Pros sold between February 2011 and December 2013 experienced issues with distorted video and out-of-the-blue system restarts. The problems affected 15in and 17in MacBook Pros from 2011 and 15in Retina MacBook Pros produced from 2012 to early 2013.

2011 MacBook Pro had complained about video issues for years before Apple addressed the issue with a recall. Some MacBook owners even filed a class-action suit against Apple, alleging problems with the AMD graphics chips and the lead-free solder that connects the GPU to the MacBook’s logic board were responsible for video problems and system failures.

In a memo distributed to Apple Stores in June 2018, Apple wrote that it had “identified a specific population of MacBook Pro (13-inch, 2017, Two Thunderbolt 3 Ports) units requiring both solid state drives and the main logic board to be replaced when either has a functional failure,”

noted in a hands-on review (warning: includes significant bad language!) that some USB-C adapters not only slowed down his 13in non-Touch Bar 2016 MacBook Pro but also appeared to slow or entirely kill the MacBook Pro’s Wi-Fi connection. The adapters worked perfectly with a Dell laptop.

Meanwhile, Mac developer Khaos Tian has not only discovered that some third-party Thunderbolt 3 docks don’t work with the new 2016 MacBook Pro but even

Reports of failing MacBook Pros have been flooding in since 2013, with many owners of 2011 models with AMD graphics suffering from system crashes and hardware problems that have been described as “critical”. After a long wait, Apple finally announced a repair programme, and we’ve got all the details here. For coverage of similar programmes covering MacBooks and other Apple products, read our guide to

On its support page, Apple revealed it has determined “that a small percentage of MacBook Pro systems may exhibit distorted video, no video or unexpected system restarts”.

The products initially included in the repair program were the 15in and 17in MacBook Pro models manufactured in 2011, and 15in MacBook Pro with Retina models manufactured from Mid 2012 to Early 2013. TheMacBook Pro (15-inch, Early 2011), MacBook Pro (15-inch, Late 2011), MacBook Pro (17-inch, Early 2011) and MacBook Pro (17-inch, Late 2011) and theMacBook Pro (Retina, 15-inch, Mid 2012) and MacBook Pro (Retina, 15 inch, Early 2013). However, with the program only lasting four years kit is now too late to qualify for the repair.

Eventually, many users found that their MacBook boots to a blue or grey screen. Currently, the only permanent resolution is to get a replacement logic board, but that can prove quite costly without Apple Care. It’s believed that overheating is to blame for the issue.

Some of the readers who’ve been in touch have said that Apple has replaced their 2011 MacBook Pro’s logic board thanks to Apple Care, with some customers even claiming to have had their logic board replaced multiple times.

offered replacement hard drives for iMacs containing 1TB Seagate hard drives that have been known to fail, replacement MagSafe adapters, iBook logic board replacements back in 2004, and, most recently, a MacBook Air

Note, however, that if there is other damage to your MacBook Pro that “prevents the repair” such as a cracked screen, they’ll charge you for the replacement of that. Aside from that, though, the repair program is completely free (and so it should be!).

Picture this.You’re at home and drinking coffee while doing some work on your MacBook Pro. All of a sudden your cat jumps up onto your lap. This causes you to drop both your coffee andyour laptop.

The result? You now own a physically damaged MacBook Pro with a broken screen and possibly even liquid damage! This means that your MacBook Pro is now possibly rendered completely useless, and you are without a laptop.

Regardless of the reason for your broken device, most people might assume that repairing their broken screen or water damaged MacBook might be cheaper than purchasing new. Oftentimes this is not the case, and it can actually be more cost-effective to purchase a new device.

If you have a broken MacBook and bring it in to Apple for repairs, you will be charged a ridiculous amount of money to repair an out of warranty MacBook.

Rather than pay for repairs, instead, you can sell your used damaged MacBook. Use the money you would have spent to repair your device, but spend it on a brand new device!

It is good to note that there is not really such a thing as a MacBook “repair”. Instead, it is typically parts replacement. For example, if your chassis is dented on the side, they will not pull out the dent to “repair” it. Rather, your MacBook would need an entire chassis replacement. If your logic board has a liquid spill, Apple will not repair your logic board, but simply replace it.

There is no easy response regarding how much it will cost to repair an Apple MacBook, due to there being so many variations (such as model and year). Typically you can expect the smallest repair/replacement to be as low as $29, all the way up to as expensive as $849+.

This tier encompasses minor boards and assemblies. This can include replacement of the power supply board, inverter assembly, or interconnect board. It might also include enclosure parts or an LCD polarizer.

Damaging your MacBook screen can feel devastating. Even if your MacBook is still usable, it can be completely inconvenient to use, and generally spreads over time. If you have a broken screen on your MacBook then you are not alone. Screen repairs actually represent almost one-fourth of all repairs done by Apple in-store.

Whether you dropped your MacBook Air at school, have sudden pixel issues on your 12" MacBook, or dropped something on your MacBook Pro, a broken MacBook screen is an expensive repair.

Going back to the idea of repair Tiers, the cost of screen replacement is directly correlated with the Tier, but also with the year and model of your MacBook. If you choose to have your MacBook repaired at the Apple store, expect to spend between $455 and $755 to completely replace the screen.

Apple quotes repairs based on a series of tiers regarding damage and cost. For example, if you have a 13-inch MacBook Air and your child accidentally spills a glass of water on it, this would require a Tier 4 repair.

Tier 4 repairs can cost upwards of $750 or more. This is astronomical and almost 60% of the cost of a new MacBook Air. Apple is aware of this, and they train their employees to suggest forgoing a repair. Instead, they suggest purchasing a new device, while they recycle your broken MacBook free of cost.

Not all broken MacBooks occur because of an accident. Sometimes technology simply gets old. Years of use put a strain on a technological device, and natural wear and tear occur.

Age can show up in a MacBook as random shutdowns, a broken keyboard or trackpad, shortened battery lifetime, port issues, or overheating problems. These problems are all costly to fix and can even be expensive even for older models.

With older MacBooks, such as a broken 2012 MacBook Pro, Apple will often offer to recycle the device for you. The catch is that Apple will still make money off of it by recycling it, and this leaves you without a device and nothing in return.

Instead of fixing technology that will soon become obsolete, or recycling your broken or partially working device for nothing in return, you can sell your device to GoRoostr in order to purchase a new MacBook!

Instead of potentially spending hundreds of dollars to repair a broken and used MacBook, sell your MacBookfor the highest price on the market, and use the proceeds to purchase the newest model. In this case, you will not only have brand new technology, but you will also have a full warranty, and the option to purchase AppleCare+ in case an unfortunate incident happens again.

Have you ever noticed a weird stain on your MacBook or MacBook Pro screen that just won’t go away? Did you try to wipe it off, only for it to get bigger? You may be experiencing staingate.

In 2015, Apple announced a repair program for several MacBook models affected by issues with its anti-reflective coating. Users who have found that they are affected by these issues can get Apple to replace the anti-reflective coating for free.

Staingate, or delamination, is when the anti-reflective coating on screens wears off, causing a stain-like appearance. It is a known issue in MacBook models and tends to happen after several months of regular use. A common aggravator of staingate is the pressure exerted on the screen by the keys and trackpad when a MacBook is closed. Additionally, staingate can also occur due to the recurred use of cleaning agents and microfiber cloths.

In addition, your MacBook purchase date must be within four years for it to be eligible for free repair. It must also have no history of tampering from a non-authorized service provider.

Depending on your MacBook model, out-of-pocket repairs for the anti-reflective coating can run anywhere from $500 to $800. While unauthorized repair centers will be able to do this at a lower price, Apple insists on replacing the whole screen to avoid any potential issues.

On the next screen, you can select your registered MacBook or manually type in the serial number. Afterward, set your location so Apple can recommend the nearest authorized Apple repair centers. From there, you can choose your preferred repair date and time.

MacBook users who have previously paid for a reflective coating replacement at an authorized Apple repair center may also be eligible for a refund. However, this is decided on a case-to-case basis, and you will need to consult with a Genius bar representative if you might qualify.

Once you have checked your MacBook warranty coverage, you have two options: use AppleCare to reduce the upfront costs, or pay out-of-pocket. If you are not willing to shell out cash on a device that might be at the end of its life anyway, there are ways that you can solve the staingate issue at home.

Aside from the aesthetic issue, most delamination in MacBook screens won’t cause any real problems for daily use. If staingate doesn’t bother you so much, be sure to weigh out the risks before you decide to do a DIY screen repair.

On the Mohs Hardness scale of materials, glass has a hardness level between 5.5 to 7. On the other hand, baking soda or Sodium Bicarbonate is 2.5. As a result, it should be impossible for baking soda to scratch the display, though it is abrasive enough to remove the rest of the coating on your MacBook screen.

For example, avoid touching the screen unless necessary. You can use your laptop hinge to open your MacBook. You should also leave your device slightly open when not in use to avoid pressure on the lid. In addition, don’t overclean your screen. Avoid strong screen display cleaning agents and use a light touch when possible.

Before we proceed: If you’re facing intermittent horizontal lines at the bottom of your display, it’s not flexgate. Your MacBook has a faulty T-CON board. Read all about it here: MacBook Pro: Horizontal lines on Screen? 2016-2017 Model

This design flaw primarily afflicts the MacBook Pro 2016 and 2017 models. Both 13 inch and 15 inch models are affected.A1707 - MacBook Pro (15-inch, 2016-17, Touchbar model)

Up until 2015, the MacBook display controller or logic board used to be tucked inside the hinge cover at the bottom of the display. It was part of the “lid”, so the wire connecting to it ran inside the hinge cover and was never moved or disturbed.

Step 2: Quietly introduce a “fix” in the subsequent model. Apple discreetly increased the length of the flex cable in 2018 model MacBooks. Just by ~2mm. This would reduce the stress on the cable, thereby reducing chances of damage. Thus Apple tried fixing an issue they hadn’t acknowledged in the first place. Note: Jury is still out on whether this fix solves the problem or just delays the eventual failure. In our experience at Fixxo, 2018-19 models continue to face flex cable issues, however not in as large numbers.

But wait ..  this program is valid onlyfor “13-inch MacBook Pro 2016 model”, however it is amply clear the design flaw actually impacts both 13-inch and 15-inch variants of 2016 as well as 2017 models. Well..

If yours is a 13-inch MacBook Pro 2016 model, and the purchase date is between October 2016 and February 2018, you’re eligible for Apple"s free display replacement program. Congratulations! Take it to an Apple Authorized Service Provider. There are a number of fake AASPs around, careful!.

If your MacBook isn’t eligible for the program, you’ll unfortunately need to get a paid display replacement. It isn’t cheap. A reputed non-Apple vendor may be your best bet.

Well, the cable is integrated into the screen, so it cannot be swapped out. So, the standard resolution offered is to replace the entire display panel.

At Fixxo, however, we have recently launched the flexgate repair service. We extend the backlight flex cable by micro-soldering a small piece of replacement cable onto it. It is a highly specialized and sensitive repair. So far, the results have been very encouraging, and we"ve managed to save our clients a ton of money. By the way, this is also the change that Apple basically introduced in its 2018 MacBooks.

At Fixxo, you may even consider buying a used display panel salvaged from other dead MacBooks. It’s 100% genuine and quite cost-effective. Contact Us to discuss.

DaVinci Resolve color panels let you adjust multiple parameters at once so you can create unique looks that are impossible with a mouse and keyboard. The incredibly small DaVinci Resolve Micro Panel is great for new colorists just getting started or anyone that needs a portable panel. It features 3 high quality trackballs, knobs for primary adjustment controls and buttons for playback and navigation. The DaVinci Resolve Mini Panel features additional controls and screens for accessing virtually all palettes and tools. For the ultimate in control, the DaVinci Resolve Advanced Panel gives high end professional colorists access to every single feature and command mapped to a specific button! Learn More

The best creative tools shouldn’t be limited to Hollywood. That’s why there’s a free version of DaVinci Resolve, so you can learn how to use the same tools that professional Hollywood artists use. DaVinci Resolve is designed to inspire creativity so you can focus on doing your best work. Once you learn the software and start using it for more work, you can purchase DaVinci Resolve Studio which adds tons of additional effects, 3D and more. Adding an editor keyboard, color control panel, or audio console lets you work even faster because you can use both hands at the same time, allowing you to be more creative and do things that are impossible with a mouse!

Includes everything in the free version plus the DaVinci Neural Engine, dozens of additional Resolve FX, temporal and spatial noise reduction, stereoscopic 3D, film grain, optical blur and mist effects, and more. It also supports 10‑bit video at up to 120 frames per second and resolutions beyond 4K.