16x4 lcd display datasheet free sample

STN Yellow background color with Y/G LED backlight, bottom (or 6:00) viewing angle, Transflective (positive), ROHS Compliant. This 16x4 LCD has a wide temperature range: -20° Celcius to +70° Celcius which equates to (-4° Fahrenheit to +158° Fahrenheit).

STN (Super-twisted Nematic) provides a sharper image and wider viewing angle than TN (Twisted Nematic). The cost for STN if approximately 5% higher than TN. STN is an ideal fluid for outdoor products that need to be read at various angles. The Transflective polarizer is a mixture of Reflective and Transmissive. It provides the ability to read the LCD with or without the backlight on. It will work for all lighting conditions from dark with backlight to direct sunlight which makes it the most common choice. There is no cost difference between Transflective, Transmissive and Reflective.

Focus LCDs can provide many accessories to go with your display. If you would like to source a connector, cable, test jig or other accessory preassembled to your LCD (or just included in the package), our team will make sure you get the items you need.Get in touch with a team member today to accessorize your display!

Focus Display Solutions (aka: Focus LCDs) offers the original purchaser who has purchased a product from the FocusLCDs.com a limited warranty that the product (including accessories in the product"s package) will be free from defects in material or workmanship.

ERMC1604SBS-1 is 16 characters wide,4 rows character lcd module,SPLC780C controller (Industry-standard HD44780 compatible controller),6800 4/8-bit parallel interface,single led backlight with white color included can be dimmed easily with a resistor or PWM,stn- blue lcd negative,white text on the blue color,wide operating temperature range,rohs compliant,built in character set supports English/Japanese text, see the SPLC780C datasheet for the full character set. It"s optional for pin header connection,5V or 3.3V power supply and I2C adapter board for arduino.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!".For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and Development Kit at the bottom of this page.

Text: eltrend WT5058 8-bit µ C with 8KB ROM, an 8-CH 12-bit A/D Converter and 16x4 LCD Driver , on-chip ROM, an 8-channel 12-bit analog to digital converter and 16x4 LCD driver. This chip is suitable , controller, 16x4 LCD driver and an 8-channel 12-bit A/D converter. To be suitable for portable , -CH 12-bit A/D Converter and 16x4 LCD Driver u 12-bit resolution with ±2 LSB accuracy u External , WT5058 8-bit µ C with 8KB ROM, an 8-CH 12-bit A/D Converter and 16x4 LCD Driver PACKAGE PIN

Abstract: 16X4 LCD command program for lcd display 16x4 LCD 16x4 block diagram of lcd display 16x4 16X4 LCD display 16x4 sram circuit diagram of lcd display 16x4 16 pin diagram of lcd display 16x4 WT50F6

Text: WT50F6 8-bit µC with 8KB ISP Flash Memory, 8-CH 12-bit A/D Converter and 16x4 LCD Driver , 16x4 LCD driver. This chip is suitable for variable applications, especially where analog signal , , RAM, flash memory, I/Os, dual 16-bit timer/counters; interrupt controller, 16x4 LCD driver and an 8 , 16x4 LCD Driver Preliminary Dual PWM Dual 16-bit timer/counters UART and serial I/O interface A/D , .1.10 WT50F6 8-bit µC with 8KB ISP Flash Memory, 8-CH 12-bit A/D Converter and 16x4 LCD Driver Preliminary

Text: eltrend WT50F5 8-bit µ C with 8KB Flash Memory, an 8-CH 12-bit A/D Converter and 16x4 LCD , with 8Kbytes on-chip flash memory, an 8-channel 12-bit analog to digital converter and 16x4 LCD , memory, I/Os, dual 16-bit timer/counters, interrupt controller, 16x4 LCD driver and an 8-channel 12 , 16x4 LCD Driver u 12-bit resolution with ±2 LSB accuracy u External reference input, ADVRF u LCD , , TAIWAN eltrend WT50F5 8-bit µ C with 8KB Flash Memory, an 8-CH 12-bit A/D Converter and 16x4 LCD

Text: WT5060 General Description The WT5060 is a high-pertormance, low-cost, CMOS S-t>it single-chip microcontroller with SKbytes mask ROM, an 8-channet 12-bit rail-raii Aj"D converter and 16x4 LCD driver. This chip , signal conversion. LCD display and short development cycle are required, including industrial control , lime/per channel ■12-bii resolution with ~2 lsb accuracy LCD driver ■LCD direci drive (ma*. 64dois LCD display ai 1/4 duty] ■Selectable lcd bias voltage from external input vlcd or internal vdd â

Text: 16x4 LCD driver. This chip is suitable for variable applications, especially where analog signal (sensor output) to digital signal conversion, LCD display and short development cycle are required , •Sample and hold •20 S conversion lime/per channel •12-bil resolution with 2 LSB accuracy LCD driver •LCD direcl drive (max. 64dots LCD display a I 1/4 duty) •Selectable LCD bias voltage from external

Text: CHECKED ISSUED BIGGIN HILL, ENGLAND TITLE: 16x4 LCD module with optional backlight DWG.NO. DV2433, torque and mechanical stress. ? ? Surface of LCD panel should not be touched or scratched. The display

Text: with 8Kbytes on-chip ROM, an 8channel 12-bit analog to digital converter and 16x4 LCD driver. This chip , signal conversion and LCD display are required, including industrial control, consumer, communications, and security products. This chip has 8-bit CPU, RAM, ROM, I/Os, dual 16-bit timer/counters, 16x4 LCD , ±2 LSB accuracy External reference input, ADv~ LCD driver (automatically display) LCD direct drive , counter) (Bias voltage to LCD ) ( LCD common output) ( LCD common output) ( LCD common output) ( LCD

Abstract: Nan Ya Plastics Corp. lcd lm8602 LCD lm027 Nan Ya Plastics Corp 16X4 LCD 16x4 LCD module nan ya plastics 16X4 LCD display 16X4 LCD CHARACTER CODE 16x4 LCD module

Text: WOOD DALE, IL 60191 TEL: 630-787-9089 FAX: 630-787-9015 SPECIFICATION OF 16x4 LCD MODULE PRODUCT NO , NAN YA PLASTICS CORP. ELEC. MATERIALS DIV. LCD DEPARTMENT SPECIFICATION SPEC. NO. : LM027-0 DATE , IN CHARGE REV/DATE RO/ 04.17.96" APP CHK BY NAN YA PLASTICS CORP. ELEC. MATERIALS DIV. LCD , ) Duty (8) LCD Display Mode MAX14.5 (D)mm MAX9.5 (D)mm LM_86_027_2E 87.0 (W)mm x 60.0 (H)mm (LED B.L , CORP. ELEC. MATERIALS DIV. LCD DEPARTMENT SPECIFICATION SPEC. NO. : LM027-0 DATE : Apr. 17, 1996 SHEET

Text: signals of the IC under characterization. In this system, a 16x4 LCD is proposed to implement the Display , Designer software (version 4.2). On the other hand, the LCD is operated throughout a 4-bit data bus using , . This data is displayed on the LCD or, alternatively, downloaded to the PC throughout the GUI

Text: peripherals. 2.1 LCD Module In this example, a standard 16x4 Alphanumeric LCD module is connected to the , , which includes the LCD Controller/Driver, the 16x4 LCD display and the LED backlight. Since the LCD , Application Note V850ES/Jx3 and Jx3-L 32-Bit Single-Chip Microcontrollers Software LCD Control , . 6 7 2.1 LCD Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . , V850ES/JJ3 and the LCD Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2.3

Text: Equivalent Com17~32 R 16X4 LCD A K B/L 2.Drive from pin15, pin16 Vdd Vo Vss VR , : www.crystalfontz.com PREPARED BY Contents 1.Module Classification Information 2.Precautions in use of LCD , , Orange G LED, Green Y LED, Yellow Green LCD Mode B TN Positive, Gray T FSTN Negative N TN Negative, G STN Positive, Gray Y STN Positive, Yellow Green M STN Negative, Blue F FSTN Positive LCD , and Japanese standard font 2.Precautions in use of LCD Modules (1)Avoid applying excessive shocks

Text: .Drive from A,K VR 10K~20K Controller/Com Driver HD44780 or Equivalent Com17~32 R 16X4 LCD , .Module Classification Information 2.Precautions in use of LCD Modules 3.General Specification 4.Absolute Maximum , Y LED, Yellow Green LCD Mode B TN Positive, Gray T FSTN Negative N TN Negative, G STN Positive, Gray Y STN Positive, Yellow Green M STN Negative, Blue F FSTN Positive LCD Polarizer A , standard font 3 21 2.Precautions in use of LCD Modules (1)Avoid applying excessive shocks to the

Text: Controller/Com Driver HD44780 or Equivalent R 16X4 LCD Com17~32 A K B/L 2.Drive from , .Module Classification Information 2.Precautions in use of LCD Modules 3.General Specification 4.Absolute Maximum , Y LED, Yellow Green LCD Mode B TN Positive, Gray T FSTN Negative N TN Negative, G STN Positive, Gray Y STN Positive, Yellow Green M STN Negative, Blue F FSTN Positive LCD Polarize A , standard font 3 21 2.Precautions in use of LCD Modules (1)Avoid applying excessive shocks to the

Text: Controller/Com Driver HD44780 or Equivalent Com17~32 R 16X4 LCD A K B/L 2.Drive from , : www.crystalfontz.com PREPARED BY Contents 1.Module Classification Information 2.Precautions in use of LCD , Y LED, Yellow Green LCD Mode B TN Positive, Gray T FSTN Negative N TN Negative, G STN Positive, Gray Y STN Positive, Yellow Green M STN Negative, Blue F FSTN Positive LCD Polarizer A , standard font 2. Precautions in use of LCD Modules (1)Avoid applying excessive shocks to the module or

Text: Controller/Com Driver HD44780 or Equivalent R 16X4 LCD Com17~32 A K B/L 2.Drive from , .Module Classification Information 2.Precautions in use of LCD Modules 3.General Specification 4.Absolute Maximum , Y LED, Yellow Green LCD Mode B TN Positive, Gray T FSTN Negative N TN Negative, G STN Positive, Gray Y STN Positive, Yellow Green M STN Negative, Blue F FSTN Positive LCD Polarize A , standard font 3 21 2.Precautions in use of LCD Modules (1)Avoid applying excessive shocks to the

Abstract: WH1604A 16x4 LCD ddram hd44780 1604 lcd 16 pin diagram of lcd display 16x4 LCD 16X4 block diagram of lcd display 16x4 16X4 HD44780 16X4 LCD CHARACTER CODE

Text: Controller/Com Driver HD44780 or Equivalent R 16X4 LCD Com17~32 A K B/L 2.Drive from , .Module Classification Information 2.Precautions in use of LCD Modules 3.General Specification 4.Absolute Maximum , Y LED, Yellow Green LCD Mode B TN Positive, Gray T FSTN Negative N TN Negative, G STN Positive, Gray Y STN Positive, Yellow Green M STN Negative, Blue F FSTN Positive LCD Polarize A , standard font 3 21 2.Precautions in use of LCD Modules (1)Avoid applying excessive shocks to the

Text: Controller/Com Driver HD44780 or Equivalent R 16X4 LCD Com17~32 A K B/L 2.Drive from , .Module Classification Information 2.Precautions in use of LCD Modules 3.General Specification 4.Absolute Maximum , Y LED, Yellow Green LCD Mode B TN Positive, Gray T FSTN Negative N TN Negative, G STN Positive, Gray Y STN Positive, Yellow Green M STN Negative, Blue F FSTN Positive LCD Polarize A , standard font 3 21 2.Precautions in use of LCD Modules (1)Avoid applying excessive shocks to the

Text: Equivalent Com17~32 R 16X4 LCD A K B/L 2.Drive from pin15, pin16 Vdd Vo Vss VR , : www.crystalfontz.com PREPARED BY Contents 1.Module Classification Information 2.Precautions in use of LCD , , White Backlight Type NWithout backlight LCD Mode BEL, Blue green DEL, Green WEL, White FCCFL , FFSTN Positive AReflective, N.T, 6:00 HTransflective, W.T,6:00 LCD Polarize Type/ Temperature , Japanese standard font 2.Precautions in use of LCD Modules (1)Avoid applying excessive shocks to the

Abstract: 16X4 LCD CHARACTER CODE hd44780 1604 lcd datasheet 16x4 LCD ddram block diagram of lcd display 16x4 16X4 HD44780 circuit diagram of lcd display 16x4 hd44780 lcd controller pin out 16X4 LCD

Text: HD44780 or Equivalent 16X4 LCD Com17~32 Seg1~40 Seg41~80 M CL1 CL2 Vdd,Vss,V1~V5 , : www.crystalfontz.com PREPARED BY Contents 1.Module Classification Information 2.Precautions in use of LCD , TLED, White LCD Mode: BEL, Blue green DEL, Green WEL, White FCCFL, White YLED, Yellow Green , AReflective, N.T, 6:00 HTransflective, W.T,6:00 LCD Polarizer Type/ Temperature DReflective, N.T, 12:00 , .Precautions in use of LCD Modules (1)Avoid applying excessive shocks to the module or making any alterations or

Text: , RAM, ROM, I/Os, dual 16-bit timer/counters, interrupt controller, 16x4 LCD Driver and an 8-channel 12 , with on-chip 12-bit analog to digital converter and 128 segments LCD driver. This chip can be used in variable applications where analog (sensor) to digital signal processing and LCD display are required , External reference input, ADVRF LCD driver (automatically display) LCD direct driver (max. 16 , , 1: segments B2: P1LCD; LCD commons/ V LCD or I/Os select; 0: I/Os, 1: LCD commons/VLCD B1: P1PWM1

Text: Freescale Semiconductor LCD Module Figure 1. YM12864R P-1 16x4 LCD Module The main features of , Implementing an LCD Module to the MCF5223x Extended Display for V2 Coldfire by: Shen Li Asia & Pacific Operation Microcontroller Division 1 Introduction A liquid crystal display ( LCD ) is a useful module , interfaces for communications. This document introduces how to implement a serial interface (QSPI/IIC) LCD , . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 LCD Module . . . . . . . . . . . . . . .

Text: FRM on monochrome passive LCD panels; a 16x4 Look-Up-Table is used to map 1/2/4-bpp modes into these shades • 256 simultaneous of 4096 colors on color passive LCD panels; three 16x4 Look-Up-Tables are , EPSON PF938-01 SED1373F0A Em bedded M em ory LCD C ontroller ■DESCRIPTION The SED1 3 7 3 F oa is a color / monochrome LCD controller with an embedded 40K Byte SRAM frame buffer. The , LCD interfaces with data widths up to 16 bits. Using Frame Rate Modulation, the SED1373Foa can

Abstract: block diagram of lcd display 16x4 16X4 LCD display pin diagram of lcd display 16x4 embedded ram lcd display controller LCD 16X4 Embedded SRAM lcd lcd 16x4 4 bit mode i486 bus interface lcd 2 by 16

Text: colors on color passive LCD panels; three 16x4 Look-Up-Tables are used to map 1/2/4/8-bpp modes into , PF938-01 Embedded Memory LCD Controller n DESCRIPTION The SED1373F0A is a color / monochrome LCD controller with an embedded 40K Byte SRAM frame buffer. The high integration of the SED1373F0A, battery life are major concerns. The SED1373F0A supports LCD interfaces with data widths up to 16 bits. Using Frame Rate Modulation, the SED1373F0A can display 16 shades of gray on monochrome LCD panels, and

Abstract: block diagram of lcd display 16x4 16x4 sram 16X4 LCD display pin diagram of lcd display 16x4 lcd 16x4 lcd 256 color LCD Panel Control Signal LCD 16 pin line 2 i486 bus interface

Text: -level color display. · Up to 16 shades of gray by FRM on monochrome passive LCD panels; a 16x4 Look-Up-Table , LCD panels; three 16x4 Look-Up-Tables are used to map 1/2/4/8-bpp modes into these colors · Split , EPSON PF938-01 SED1373F0A Em bedded M em ory LCD C ontroller DESCRIPTION The SED1373F oa is a color / monochrome LCD controller with an embedded 40K Byte SRAM frame buffer. The high , PCs where board size and battery life are major concerns. The SED1373 Foa supports LCD interfaces with

Text: 16x4 640x8 16x4 S0P1B I =4 0 =8 Large current OUT = 1 40 1= 4 CU6 Large current OUT = 1 2 60*" 1.5 , Evaluation board EV2421B For remole control (80 keys) Suitable tor LCD (28 x 4 ) For caroras Suitable tor LCD (3 6 x4 ) For cameras Suitable tor LCD (8 x 3 ) includes 8 bit A/D x 8 channels No.3121 A BU2425 1/0 = 4 1- 4 0 =1 LEO OUT SEG = 8 COW = 3 Analog I = 4 1/0 = 10 LCD OUT SEG = 24 COM = 4 Analog (inputs) = 8 1/0 = 10 I=8 Large current OUT = 1 LCD OUT SEG = 28 COM = 4 1/0-12 I =8 Large current OUT = 1

The Displaytech 164G series is a lineup of 16x4 character LCD modules. These modules have an 87x60 mm outer dimension with 62x24 mm viewing area on the display. The 164G 16x4 LCD displays are available in STN or FSTN LCD modes with or without an LED backlight. The backlight color options include yellow green, white, blue, pure green, or amber color. Get a free quote direct from Displaytech for a 16x4 character LCD display from the 164G series.

A 16×4 dot matrix Character LCD Module display in STN Negative Blue LCD Mode, Six O’clock viewing direction, Wide Temperature Range (Operating Temp: -20°C to 70°C, Storage Temp: -30°C to 80°C), and White LED Backlight. It has a transmissive polarizer suitable for darker environment. This product is assembled Chip On board with 1/16 Duty and a Controller IC S6A0069 or equivalent. The interface type is Parallel. This is an ROHS Compliant product manufactured with ISO standards and procedures.

I recently received some free LCD samples from my friends at FocusLCDs.com. One of which is a 16x4 LCD; P/N: C164AXBSYLY6WT. It uses a ST7066U controller (see datasheet here) instead of the HD44780 commonly found in LCD shields. I am not so sure if it will work with an Arduino and its libraries, so I wanted to try it out.

RC1604A is 16 characters x 4 lines monochrome LCD display with module dimension 87.0 x 60.0 mm. Default interface of RC1604A 16x4 LCD Display module is 6800 with built-in IC ST7066; if you require interface such as SPI or I2C, they’re available as well, but the IC will be replaced with RW1063.

Raystar provides various LED backlight combinations for RC1604A 16 characters x 4 lines LCD display module, such as yellow-green and white . You can choose module with LED backlight or without it.

LED backlight can be driven by PIN1, PIN2, PIN15, PIN16 or A and K. The RC1604A module offers a selection of fonts, including English/Japanese, Europe and Cyrillic (Russian), etc. If you’d like to obtain full datasheet of RC1602A LCD 16 characters x 4 lines, please contact us for more info!

This tutorial shows how to use the I2C LCD (Liquid Crystal Display) with the ESP32 using Arduino IDE. We’ll show you how to wire the display, install the library and try sample code to write text on the LCD: static text, and scroll long messages. You can also use this guide with the ESP8266.

Additionally, it comes with a built-in potentiometer you can use to adjust the contrast between the background and the characters on the LCD. On a “regular” LCD you need to add a potentiometer to the circuit to adjust the contrast.

Before displaying text on the LCD, you need to find the LCD I2C address. With the LCD properly wired to the ESP32, upload the following I2C Scanner sketch.

After uploading the code, open the Serial Monitor at a baud rate of 115200. Press the ESP32 EN button. The I2C address should be displayed in the Serial Monitor.

Displaying static text on the LCD is very simple. All you have to do is select where you want the characters to be displayed on the screen, and then send the message to the display.

The next two lines set the number of columns and rows of your LCD display. If you’re using a display with another size, you should modify those variables.

Then, you need to set the display address, the number of columns and number of rows. You should use the display address you’ve found in the previous step.

To display a message on the screen, first you need to set the cursor to where you want your message to be written. The following line sets the cursor to the first column, first row.

Scrolling text on the LCD is specially useful when you want to display messages longer than 16 characters. The library comes with built-in functions that allows you to scroll text. However, many people experience problems with those functions because:

The messageToScroll variable is displayed in the second row (1 corresponds to the second row), with a delay time of 250 ms (the GIF image is speed up 1.5x).

In a 16×2 LCD there are 32 blocks where you can display characters. Each block is made out of 5×8 tiny pixels. You can display custom characters by defining the state of each tiny pixel. For that, you can create a byte variable to hold  the state of each pixel.

In summary, in this tutorial we’ve shown you how to use an I2C LCD display with the ESP32/ESP8266 with Arduino IDE: how to display static text, scrolling text and custom characters. This tutorial also works with the Arduino board, you just need to change the pin assignment to use the Arduino I2C pins.

16×2 LCD is named so because; it has 16 Columns and 2 Rows. There are a lot of combinations available like, 8×1, 8×2, 10×2, 16×1, etc. But the most used one is the 16*2 LCD, hence we are using it here.

All the above mentioned LCD display will have 16 Pins and the programming approach is also the same and hence the choice is left to you. Below is the Pinout and Pin Description of 16x2 LCD Module:

These black circles consist of an interface IC and its associated components to help us use this LCD with the MCU. Because our LCD is a 16*2 Dot matrix LCD and so it will have (16*2=32) 32 characters in total and each character will be made of 5*8 Pixel Dots.  A Single character with all its Pixels enabled is shown in the below picture.

So Now, we know that each character has (5*8=40) 40 Pixels and for 32 Characters we will have (32*40) 1280 Pixels. Further, the LCD should also be instructed about the Position of the Pixels.

It will be a hectic task to handle everything with the help of MCU, hence an Interface IC like HD44780 is used, which is mounted on LCD Module itself. The function of this IC is to get the Commands and Data from the MCU and process them to display meaningful information onto our LCD Screen.

The LCD can work in two different modes, namely the 4-bit mode and the 8-bit mode. In 4 bit mode we send the data nibble by nibble, first upper nibble and then lower nibble. For those of you who don’t know what a nibble is: a nibble is a group of four bits, so the lower four bits (D0-D3) of a byte form the lower nibble while the upper four bits (D4-D7) of a byte form the higher nibble. This enables us to send 8 bit data.

As said, the LCD itself consists of an Interface IC. The MCU can either read or write to this interface IC. Most of the times we will be just writing to the IC, since reading will make it more complex and such scenarios are very rare. Information like position of cursor, status completion interrupts etc. can be read if required, but it is out of the scope of this tutorial.

The Interface IC present in most of the LCD is HD44780U,in order to program our LCD we should learn the complete datasheet of the IC. The datasheet is given here.

There are some preset commands instructions in LCD, which we need to send to LCD through some microcontroller. Some important command instructions are given below:

Blue Color 1604A LCD 16X4 LCD Display is 16 characters wide,4 rows character lcd module,SPLC780C controller (Industry-standard HD44780 compatible controller),6800 4/8-bit parallel interface,single led backlight with yellow green color included can be dimmed easily with a resistor or PWM,stn-lcd positive,dark blue text on the yellow green color,wide operating temperature range,rohs compliant,built in character set supports English/Japanese text, see the SPLC780C datasheet for the full character set.Optional 3.3v or 5v power supply and optional pin header connection.

Yes, the LiquidCrystal_I2C library (at least the one in the IDE library manager) is broken for 16x4 displays. There is no way to work around this without fixing the library code.

The LiquidCrystal_I2C library became such a mess along with what I felt was a need for a "plug and play" solution for these types of LCDs that I created the hd44780 library back in 2016