7 hdmi lcd touch screen factory

5.Remove the line dtoverlay=vc4-fkms-V3D 6.Add the following lines to the end of config.txt file then save.max_usb_current=1 hdmi_group=2 hdmi_mode=87 hdmi_cvt 1024 600 60 6 0 0 0 hdmi_drive=1 1.Insert the TF card to Raspberry Pi 2.Connect Touch interface of the display to a USB port of Raspberry Pi 3.Connect Display interface to HDMI port of Raspberry Pi 4.Power on Raspberry Pi and the LCD will display

This 7" LCD Display module with Capacitive touch and HDMI Media Interface is an ideal solution for single board computer display. Easy to use, this LCD supports SBC"s like Raspberry Pi, BeagleBone Black, Banana Pi etc. Ideal for your application if it involves Video playing etc.

7inch HDMI LCD(C) supports various systems like Raspberry Pi, Banana Pi, Banana Pro, and BB Black to provide Lubuntu, Raspbian, and Angstrom images with a high resolution of 1024×600 and a Capacitive Touch Screen. Besides, it upgrades to an IPS screen with a larger visible angle and more clear display effect. Broadly you can apply it to raspberry pi, HDMI display screen, and other mini PC or even computer displays. If you gonna use it on raspberry pi zero and BB Black, you need to buy HDMI connect wire for the use and for raspberry pi zero you also need to buy A USB type A micro cable. Matched with raspberry pi, it supports raspbian, ubuntu to do single touch without touch, and while as A PC display, it supports Windows 10 / 8.1 / 8 / 7 to do the five-point touch without drive. For the Windows 10/8.1/8 OS, the touch screen supports multi-touch up to 10 points. For some Windows 7 OS, the touch screen supports single touch only. When working with Raspberry Pi, you should set the resolution of the LCD by yourself, or else the LCD screen will not work. When working with Beagle bone, this LCD module is used for display only so you can program the latest Angstrom image file to the board directly without any change. The BeagleBone will read the display parameters of the 7-inch HDMI displayer and set the resolution to 800*480 automatically.

ER-TFTV070-5 is 800x480 dots 7" color tft lcd module display with HDMI,VGA,Video,AV signal driver board and superior display quality,super wide view angle. optional 4-wire resistive touch panel with USB driver board and cable, optional capacitive touch panel with USB controller board and cable, optional remote control,It can be used in any embedded systems,car,industrial device,security and hand-held equipment which requires display in high quality and colorful video.It"s also ideal for raspberry pi by HDMI.

Equipped with IPS Screen with HD 1024*600 high resolution, 16:9 display format conversion in the image and an expansive 178 degree viewing angles is ideal for work and for reviewing on-screen data.

● Operating voltage: 12V 1A power supply current requirements within the above 2A, On board 400mA DC-DC Boost regulator to provide power supply to LCD backlight.

● Support 864 x 480 x 24bit graphics content through SSD1963 controller .It also equips parallel MCU interfaces in different bus width to receive graphics data and command from MCU. Its display interface supports common RAM-less LCD driver of color depth up to 24 bit-perpixel. Warning: All data port voltage can not exceed 3.6V.

We understand the urgent needs on geting the parts quickly to make breathing devices. We are now working hard to produce the screens, if you have any question, welcome to send us emails.