4 digit lcd display datasheet brands

TOPWAY Smart LCDs embed a display engine and a versatile range of TFT display sizes and Touch-Panels to support a wide range of industrial and instrumentation application.

This high performance universal digital panel meter features a bright 56 mm high display for high visibility at long distances. Setup can be done via its keyboard or via a remote PC since it features ...

... .)Zero and Span calibration adjustment.Keypad lock via 8 digit customisable password.4 Digit Display: Standard Digital Display Kit for Gascard NG ...

LED displays of the NDI 100/4 R H65 series are used in demanding industrial conditions and are intended for displaying numerical values of various measured ...

The ELEN universal LED displays of the NDU 100/4 R series are commonly used for light industrial applications, and offer information about different units, such as weight, temperature, ...

The large display DM100 is available with Profibus, Profinet, CANopen, EtherCAT and Modbus RS485 interface. Other interfaces are being prepared. The 100mm high display is available with 4 ...

With our standard devices you get LED displays which are ready-for-connection, maintenance-free and easy-to-assemble. Our products are characterised by their ...

... variables (0-20 mA / 4-20 mA / 0-10 V / 2-10 V / 0-5 V) to be displayedin engineering units on the control panel. Any optional display range can be assigned to the input signal range. Large 5 digit, ...

... process variables (0-20 mA / 4-20 mA / 0-10 V / 2-10 V / 0-5 V) to be displayed in engineering units on the control panel. Any optional display range can be assigned to the input signal range. Large 5 ...

The DL100 is the EXTERNAL DISPLAY for the loggers / limiters: LRF-04, LRF-05, RS-60, LRS-03 and LCA-02; it consists of four 100 mm LED digits where the sound pressure level measured by ...

We offer a custom design service to produce surface mount LED displays to cusomers specific application. Shown is an example of a multi-digit display ...

The E series numerical panel displays from VISUAL ELECTRONIC include versions in various DIN sizes with individual control variants. This makes them ideal for complex ...

STN, Gray background, Yellow/Green LED, Bottom view, Wide temp, Transflective (positive), 5V LCD, 5V LED, Controller=AIP31066, RoHS Compliant. This display has a wide temperature range: -20° Celcius to +70° Celcius which equates to (-4° Fahrenheit to +158° Fahrenheit).

STN (Super-twisted Nematic) provides a sharper image and wider viewing angle than TN (Twisted Nematic). The cost for STN if approximately 5% higher than TN. STN is an ideal fluid for outdoor products that need to be read at various angles. The Transflective polarizer is a mixture of Reflective and Transmissive. It provides the ability to read the LCD with or without the backlight on. It will work for all lighting conditions from dark with backlight to direct sunlight which makes it the most common choice. There is no cost difference between Transflective, Transmissive and Reflective.

Focus LCDs can provide many accessories to go with your display. If you would like to source a connector, cable, test jig or other accessory preassembled to your LCD (or just included in the package), our team will make sure you get the items you need.Get in touch with a team member today to accessorize your display!

Focus Display Solutions (aka: Focus LCDs) offers the original purchaser who has purchased a product from the FocusLCDs.com a limited warranty that the product (including accessories in the product"s package) will be free from defects in material or workmanship.

This display module is based on the TM1637 display controller chip and is available with red, green or blue .056" digits and either decimal points or a colon for clock applications.

The module runs from a 5 volt supply and the interface is two wire serial, similar to, but not compatible with I2C. There are several libraries available on the web to drive TM1637 display modules for both Arduino and Raspberry Pi. A link to our favorite Arduino library is in the resources section below.

Display: A display from my driver documentation, if I have multiple colors they are all included here. Click on it to see information in driver library.

This statement confirms that the product detailed below complies with the specifications currently published in the RS media and has been subject to the strict quality conditions imposed by RS Components’ internal management systems. Furthermore and where applicable, it confirms that all relevant semiconductor devices have been handled and packed under conditions that meet the administrative and technical requirements of ANSI/ESD S20.20 and EN61340-5-1 electrostatics control standards.

{"specs":[],"skus":[{"id":3810,"useViewType":false,"productId":317,"templateId":1,"code":"","name":"4-1/2 Digits LCD Panel, EDS808","stock":0,"price":0.00,"retailPrice":0.00,"weight":0.00,"status":"1","isDefault":"1","createDate":"2021-06-30 17:32:11","updateDate":"2021-06-30 17:32:11","productSkuSpecs":[],"moq":1,"skuId":0,"chargedWeight":0.00}],"specConfs":[]}

Our new line of 10.1” TFT displays with IPS technology are now available! These 10.1” IPS displays offer three interface options to choose from including RGB, LVDS, and HDMI interface, each with two touchscreen options as capacitive or without a touchscreen.

The new line of 3.5” TFT displays with IPS technology is now available! Three touchscreen options are available: capacitive, resistive, or without a touchscreen.