ips tft display for sale

ER-TFT028A2-4 is 240x320 pixel 2.8 inch IPS TFT LCD Display Panel with ILI9341 controller IC,optional capacitive touch panel and 4-wire resistive touch panel,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO ARM and Raspberry PI.It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.It supports 8080 8-bit,9-bit,16-bit,18-bit parallel,3-wire,4-wire serial spi interface. FPC with zif connector is easily to assemble or remove.Lanscape mode is also available.

TFT LCD Modules: The CFAF240320W-020T-TS IPS TFT boasts vibrant, full color images at 200 PPI (Pixels Per Inch) in a compact 2” package for crystal clear, sharp images and text perfect for small applications and up close viewing. This touchscreen IPS TFT display has a wider viewing angle than a TN TFT display.

The CFAF240320W-020T-TS connects to the host via a single 45-pin ZIF connector, allowing for quick and easy installation. The display supports a wide variety of interfaces, including parallel, SPI, and RGB DOT-CLK to work seamlessly with a large variety of host devices.

Winstar TFT LCD product portfolio comes with IPS (In-Plane Switching) TFT LCD display modules, we offer a full range of modules; available sizes from mini IPS TFT of 0.96" to 12.3 inch IPS display, to deliver better performance in a range of demanding situations, we also offer higher brightness version (750~1100 cd/m2) as options for some models and offer resistive touchscreen (RTP) or capacitive touchscreen (PCAP) for optional as well. These wider view TFT IPS LCD displays can be operating at the temperature range from -20℃ to +70℃ or up to +85℃; and storage temperatures from -30℃ to +85℃ or +90℃. The IPS TFT LCD Panel is becoming very popular because of featuring a super wider viewing angle. It also improves the aperture ratio to produce higher brightness with improved color reproducibility.

Our new line of 10.1” TFT displays with IPS technology are now available! These 10.1” IPS displays offer three interface options to choose from including RGB, LVDS, and HDMI interface, each with two touchscreen options as capacitive or without a touchscreen.

The new line of 3.5” TFT displays with IPS technology is now available! Three touchscreen options are available: capacitive, resistive, or without a touchscreen.

The IPS transmissive type color active matrix TFT liquid crystal display. In-Plane Switching (IPS) was one of the first refinements to produce significant gains in the light-transmissive characteristics of TFT panels. It is a technology that addresses the two main issues of a standard twisted nematic (TN) TFT display: colour and viewing angle. If you would like to learn more IPS TFT LCD display, IPS touchscreen display products details, please browse the following categories and feel free to inquire.

This ST7735S 1.8" TFT Display features a resolution of 128×160 and SPI (4-wire) communication. Integrated with a microSD card slot, it allows you to easily read full-colour bitmaps from the SD card.

The module provides you with two wiring methods: pin header and GDI (General Display interface). You can directly connect the display to a FireBeetle main controller using the included FPC cable. Plug n" play and easy to wire, the display supports a low refresh rate and offers a good display effect and strong versatility.

This lovely little display breakout is the best way to add a small, colourful, and very bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available! The 1.69" display has 280x240 16-bit full-colour pixels and is an IPS display, so the colour looks great up to 80 degrees off-axis in any direction. The TFT driver (ST7789) is very similar to the popular ST7735, and our Arduino library supports it well.

Note that the way we get the rounded corners is bydeletingpixels. The corner pixels are still addressed in RAM, they just don"t appear, so it isn"t like you have to do some special radial-pixel mapping. Treat it like a rectangular display.

Our breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as an ultra-low-dropout 3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic. We also had a little space so we placed a microSD card holder so you can easily load full colour bitmaps from a FAT16/FAT32 formatted microSD card. The MicroSD card is not included, but you can pick one up here.

This display breakout also features an 18-pin "EYE SPI" standard FPC connector with a flip-top connector. You can use an 18-pin 0.5mm pitch FPC cable to connect to all the GPIO pins, for when you want to skip the soldering.