pls tft display hindi price

आपके स्मार्टफोन की डिस्प्ले के बारे में आप कितना जानते हैं? डिस्प्ले के नाम जैसे कि AMOLED, OLED, LCD, TFT के बारे में आप कितना विस्तार से जानते हैं? इनके नाम बहुत छोटे हैं, लेकिन इनमें से कौन-सा बेहतर है, किस रिफ्रेश रेट के साथ आता है, रेज़ॉल्यूशन कितना है इन सब सवालों को जानकर यदि आप अपने लिए स्मार्टफोन चुनना चाहते हैं तो आपके इन सभी प्रश्नों के उत्तर मिलेंगे यहाँ।

पिछले कुछ सालों में स्मार्टफोन की डिस्प्ले काफी बेहतर हुई हैं। लेकिन प्रत्येक स्मार्टफोन डिस्प्ले के साथ जो शार्ट-फॉर्म एक संक्षिप्त नाम जुड़ता है, जैसे कि AMOLED, LCD, इत्यादि वो केवल नाम नहीं बल्कि अपने आप में एक तकनीक है। स्मार्टफोन पर लगे पैनल AMOLED, OLED, LED, LCD, IPS, TFT, LTPS, इत्यादि होते हैं। ये सभी पूर्णत: अलग होते हैं।

डिस्प्ले के टाइप तो बहुत सारे हैं जैसे कि TFT, LTPS, AMOLED, OLED, IPS, LCD इत्यादि। लेकिन इन दिनों TFT, LTPS जैसी डिस्प्ले काफी कम हो गयीं हैं। किफ़ायती दामों पर और मिड-रेंज में आने वाले फोनों में आपको IPS LCD डिस्प्ले मिलेगी। लेकिन इन सबका विस्तार से समझें, तो मतलब क्या है ?

LCD का मतलब या फुल फॉर्म है लिक्विड क्रिस्टल डिस्प्ले (Liquid Crystal Display)। इसमें लिक्विड क्रिस्टल्स की एक श्रंखला दी जाती है जिसके पीछे एक बैकलाइट होती है। इस डिस्प्ले टाइप का हर जगह आसानी से उपलब्ध होना और कम दामों में इसका निर्माण इसे स्मार्टफोनों के लिए एक प्रचलित विकल्प या पसंद बनाता है।

स्मार्टफोनों में आपको दोनों डिस्प्ले TFT और IPS मिलती हैं। TFT का फुल फॉर्म है – Thin Film Transistor, जो LCD का ही एक बेहतर या एडवांस्ड वर्ज़न है, जो एक एक्टिव मैट्रिक्स (active matrix) का इस्तेमाल करता है। active matrix का अर्थ है कि प्रत्येक पिक्सेल एक अलग ट्रांजिस्टर और कपैसिटर से जुड़ा होता है।

TFT डिस्प्ले का सबसे बड़ा फायदा यही है कि इसके प्रोडक्शन में तुलनात्मक कम खर्च होता है और इसमें असल LCD के मुकाबले ज्यादा कॉन्ट्रास्ट मिलता है। वहीं TFT LCD में नुकसान ये है कि इन्हें रेगुलर LCD प्रकारों के मुकबाले ज्यादा एनर्जी यानि बैटरी चाहिए, इनके व्यूिंग एंगल और रंग भी इतने अच्छे नहीं होते। इन्हीं सब कारणों से बाकी डिस्प्ले विकल्पों की गिरती कीमतों के कारण अब TFT डिस्प्ले का इस्तेमाल स्मार्टफोनों में नहीं किया जाता।

TFT(Thin Film Transistor) – ये भी LCD डिस्प्ले का ही एक प्रकार है जिसमें नीचे एक पतली सेमीकंडक्टर की परत होती है जो हर एक पिक्सल पर रंगों को नियंत्रित करने का काम करता है। इसका और AMOLED में आने वाले AM यानि कि active matrix का काम लगभग एक ही है।

LTPS(Low Temperature PolySilicon) – ये भी Si (amorphous silicon) तकनीक पर आधारित TFT का ही वैरिएंट है जिसमें आपको हाई रेज़ॉल्यूशन मिलता है और ऊर्जा यानि कि पॉवर साधारणत: TFT से कम लेता है।

IGZO(Indium Gallium Zinc Oxide) – ये भी एक सेमिकंडक्टर मैटेरियल है जो डिस्प्ले के नीचे लगी फिल्म में इस्तेमाल होता है और आजकल a semiconductor material used in TFT films, which also allows higher resolutions and lower power consumption, and sees action in different types of LCD screens (TN, IPS, VA) and OLED displays

PLS (Plane to Line Switching) – PLS और IPS के नाम या उनके फुल फॉर्म लगभग एक ही जैसे लगते हैं। लेकिन इसमें आश्चर्य की कोई बात नहीं है क्योंकि इनका मुख्य कार्य भी एक समान ही है। PLS टेक्नोलॉजी को Samsung Display द्वारा बनाया गया है और IPS डिस्प्ले की ही तरह इसकी विशेषता भी डिस्प्ले पर अच्छे रंग दर्शाना और बेहतर व्यूइंग एंगल दिखाना ही हैं। लेकिन इसमें OLED और LCD/VA डिस्प्ले के मुकाबले कॉन्ट्रास्ट थोड़ा कम है।

Samsung Display का कहना है कि PLS पैनलों के उत्पादन में लागत कम लगती है, ब्राइटनेस लेवल अच्छा मिलता है और प्रतियोगी कंपनी LG Display के IPS पैनलों के मुकाबले व्यूइंग एंगल भी काफी अच्छे मिलते हैं। अंतत: PLS पैनल का उपयोग किया जाए या IPS पैनल का इस्तेमाल करें, ये पूरी तरह से स्मार्टफोन निर्माताओं पर निर्भर करता है।

AMOLED की फुल फॉर्म – एक्टिव मैट्रिक्स ऑर्गेनिक लाइट एमिटिंग डायोड (Active Matrix Organic Light-Emitting Diode) है। हालांकि ये सुनने में बहुत मुश्किल नाम लग रहा होगा, लेकिन ये है नहीं। हम पहले ही TFT LCD टेक्नोलॉजी में एक्टिव मैट्रिक्स के बारे में पढ़ चुके हैं और अब रहा OLED, तो ये केवल एक पतली फिल्म वाली डिस्प्ले तकनीक है और कुछ नहीं।

पिक्सल डेंसिटी की बात करें तो, 2010 में iPhone 4 के लॉन्च के समय Apple का मुख्य आकर्षण यही था। इस स्मार्टफोन डिस्प्ले में कंपनी ने LCD डिस्प्ले का इस्तेमाल किया। इस LCD पैनल ((LED, TFT, और IPS) को हाई रेज़ॉल्यूशन (उस समय पर 960 X 640 पिक्सल्स) के साथ Retina Display का नाम दिया। इस फ़ोन में 3.5 इंच की डिस्प्ले थी।

उस समय पर Apple के मार्केटिंग डिपार्टमेंट ने Retina Display नाम इसलिए चुना क्योंकि कंपनी के अनुसार एक निश्चित दूरी से हमारी या किसी भी इंसान की आंखें अलग-अलग पिक्सल में फर्क नहीं कर पाती। iPhones के केस में, ये नाम तब इस्तेमाल होता था जब फ़ोन की डिस्प्ले पर 300 ppi (pixel per inch) से ज्यादा होती थी।

इसके बाद कंपनी ने iPhone 11 Pro के साथ डिस्प्ले का नया नाम भी लॉन्च किया – “Super Retina XDR”। इसमें भी वही OLED पैनल का उपयोग किया गया है, लेकिन इसे पैनल का निर्माण Samsung Display या LG Display द्वारा हुआ है। इसमें आपको 2,000,000:1 रेश्यो के साथ और भी बेहतर कॉन्ट्रास्ट लेवल और 1200 nits की ब्राइटनेस मिलते हैं और ये ख़ासकर HDR कंटेंट के लिए अनुकूल हैं।

वहीँ इनकी ख़ामियों की बात करें तो, इनको बनाने में काफी ज़्यादा लागत लगती है और कॉम्पोनेन्ट की पूर्ती करने वाली कंपनियां भी सीमित ही हैं। इनमें Samsung Display, LG Display और तीसरे नंबर पर चीन की इलेक्ट्रॉनिक्स कंपनी BOE और कुछ एक जो OLED की मांग को पूरा करते हैं। जबकि LCD पैनल बनाने वाली काफी कम्पनियां हैं।

New Delhi: The technology used in mobile displays in the modern day smartphones has progressed significantly. In the era of touchscreen  smartphones, the display technology has become one of its primary selling points, and certainly its most unique feature. Not only we want the touch screens to offer crisp text, vibrant images, blur-free video and enough brightness, we want them at low cost too.

For instance, HTC One uses Super LCD3 tech, in its 4.7in screen which gives a resolution of 1920 x 1080 pixels, with pixel density of 469 pixels per inch (ppi). This results in super display in terms of crispness and colour reproduction. HTC says the SLCD technology gives the phone better power management, improved viewing angles and is easier to produce.

The Thin film transistor liquid crystal display (TFT LCD) technology is the most common display technology used in mobile phones. A variant of liquid crystal display (LCD), the technology uses TFT technology to enhance image quality. It offers better image quality and higher resolutions as compared to earlier generation LCD displays.

IPS LCD Stands for In Plane Switching liquid Crystal Display. This technology offers better display quality as compared to the TFT-LCD display. The good part about IPS LCD is that it offers better viewing angles and consumes less power. Due to higher costs, it is found only on high-end smartphones. Apple uses a high resolution (640x960 pixels) version of IPS LCD in its iPhone 4, which is also called Retina Display.

Organic Light Emitting Diode (OLED) display technology is much better as compared to the LCD display technology because of its excellent colour reproduction, faster response times, wider viewing angles, higher brightness and extremely light weight designs.

Since these display forms are easier to produce, they can be made to larger sizes. Because OLEDs are essentially plastics, they can be made into large, thin sheets.

AMOLED screens have all the attributes of an OLED display like excellent colour reproduction, faster response times, wider viewing angles, higher brightness and extremely light weight designs.

Super AMOLED display technology is an advanced version of AMOLED display. Samsung uses this term for the AMOLED panels that they develop. Super AMOLED  screens are built with capacitive touch sensors on the display itself. Super AMOLED display is much more responsive than an AMOLED display. Samsung top-of-the-line Galaxy SII comes engineered with Super AMOLED display technology. Samsung has already took it"s SMOLED screen to next levels by developing Super AMOLED+, HD Super AMOLED+ and FHD Super AMOLED+ screens.

It is a name given by Apple to the high-resolution screen technology introduced on the iPhone 4 in June 2010. Something is a Retina Display when it offers a density of pixels above 163 pixels per inch. The company calls it the Retina display because its pixels cannot be individually identified by a human eye, thus rendering a super sharp display, more crisp text and more clear pictures.

Retina Display is designed to smooth the jagged edges of pixels are provide a higher-quality image than previously available on mobile devices. Apple claims that its resolution is so good that it makes it impossible for the human eye to distinguish individual pixels. Its effects shows up in text, images and videos.

Color boost is simply Moto"s marketing term for their new display. Although it now uses LCD displays, the company fine-tuned its panels to match the saturation of OLED displays while maintaining the higher performance of LCD. It"s somewhere in the middle ground.

A thin-film-transistor liquid-crystal display (TFT LCD) is a variant of a liquid-crystal display that uses thin-film-transistor technologyactive matrix LCD, in contrast to passive matrix LCDs or simple, direct-driven (i.e. with segments directly connected to electronics outside the LCD) LCDs with a few segments.

In February 1957, John Wallmark of RCA filed a patent for a thin film MOSFET. Paul K. Weimer, also of RCA implemented Wallmark"s ideas and developed the thin-film transistor (TFT) in 1962, a type of MOSFET distinct from the standard bulk MOSFET. It was made with thin films of cadmium selenide and cadmium sulfide. The idea of a TFT-based liquid-crystal display (LCD) was conceived by Bernard Lechner of RCA Laboratories in 1968. In 1971, Lechner, F. J. Marlowe, E. O. Nester and J. Tults demonstrated a 2-by-18 matrix display driven by a hybrid circuit using the dynamic scattering mode of LCDs.T. Peter Brody, J. A. Asars and G. D. Dixon at Westinghouse Research Laboratories developed a CdSe (cadmium selenide) TFT, which they used to demonstrate the first CdSe thin-film-transistor liquid-crystal display (TFT LCD).active-matrix liquid-crystal display (AM LCD) using CdSe TFTs in 1974, and then Brody coined the term "active matrix" in 1975.high-resolution and high-quality electronic visual display devices use TFT-based active matrix displays.

The liquid crystal displays used in calculators and other devices with similarly simple displays have direct-driven image elements, and therefore a voltage can be easily applied across just one segment of these types of displays without interfering with the other segments. This would be impractical for a large display, because it would have a large number of (color) picture elements (pixels), and thus it would require millions of connections, both top and bottom for each one of the three colors (red, green and blue) of every pixel. To avoid this issue, the pixels are addressed in rows and columns, reducing the connection count from millions down to thousands. The column and row wires attach to transistor switches, one for each pixel. The one-way current passing characteristic of the transistor prevents the charge that is being applied to each pixel from being drained between refreshes to a display"s image. Each pixel is a small capacitor with a layer of insulating liquid crystal sandwiched between transparent conductive ITO layers.

The circuit layout process of a TFT-LCD is very similar to that of semiconductor products. However, rather than fabricating the transistors from silicon, that is formed into a crystalline silicon wafer, they are made from a thin film of amorphous silicon that is deposited on a glass panel. The silicon layer for TFT-LCDs is typically deposited using the PECVD process.

Polycrystalline silicon is sometimes used in displays requiring higher TFT performance. Examples include small high-resolution displays such as those found in projectors or viewfinders. Amorphous silicon-based TFTs are by far the most common, due to their lower production cost, whereas polycrystalline silicon TFTs are more costly and much more difficult to produce.

The twisted nematic display is one of the oldest and frequently cheapest kind of LCD display technologies available. TN displays benefit from fast pixel response times and less smearing than other LCD display technology, but suffer from poor color reproduction and limited viewing angles, especially in the vertical direction. Colors will shift, potentially to the point of completely inverting, when viewed at an angle that is not perpendicular to the display. Modern, high end consumer products have developed methods to overcome the technology"s shortcomings, such as RTC (Response Time Compensation / Overdrive) technologies. Modern TN displays can look significantly better than older TN displays from decades earlier, but overall TN has inferior viewing angles and poor color in comparison to other technology.

Most TN panels can represent colors using only six bits per RGB channel, or 18 bit in total, and are unable to display the 16.7 million color shades (24-bit truecolor) that are available using 24-bit color. Instead, these panels display interpolated 24-bit color using a dithering method that combines adjacent pixels to simulate the desired shade. They can also use a form of temporal dithering called Frame Rate Control (FRC), which cycles between different shades with each new frame to simulate an intermediate shade. Such 18 bit panels with dithering are sometimes advertised as having "16.2 million colors". These color simulation methods are noticeable to many people and highly bothersome to some.gamut (often referred to as a percentage of the NTSC 1953 color gamut) are also due to backlighting technology. It is not uncommon for older displays to range from 10% to 26% of the NTSC color gamut, whereas other kind of displays, utilizing more complicated CCFL or LED phosphor formulations or RGB LED backlights, may extend past 100% of the NTSC color gamut, a difference quite perceivable by the human eye.

In 2004, Hydis Technologies Co., Ltd licensed its AFFS patent to Japan"s Hitachi Displays. Hitachi is using AFFS to manufacture high end panels in their product line. In 2006, Hydis also licensed its AFFS to Sanyo Epson Imaging Devices Corporation.

A technology developed by Samsung is Super PLS, which bears similarities to IPS panels, has wider viewing angles, better image quality, increased brightness, and lower production costs. PLS technology debuted in the PC display market with the release of the Samsung S27A850 and S24A850 monitors in September 2011.

TFT dual-transistor pixel or cell technology is a reflective-display technology for use in very-low-power-consumption applications such as electronic shelf labels (ESL), digital watches, or metering. DTP involves adding a secondary transistor gate in the single TFT cell to maintain the display of a pixel during a period of 1s without loss of image or without degrading the TFT transistors over time. By slowing the refresh rate of the standard frequency from 60 Hz to 1 Hz, DTP claims to increase the power efficiency by multiple orders of magnitude.

Due to the very high cost of building TFT factories, there are few major OEM panel vendors for large display panels. The glass panel suppliers are as follows:

External consumer display devices like a TFT LCD feature one or more analog VGA, DVI, HDMI, or DisplayPort interface, with many featuring a selection of these interfaces. Inside external display devices there is a controller board that will convert the video signal using color mapping and image scaling usually employing the discrete cosine transform (DCT) in order to convert any video source like CVBS, VGA, DVI, HDMI, etc. into digital RGB at the native resolution of the display panel. In a laptop the graphics chip will directly produce a signal suitable for connection to the built-in TFT display. A control mechanism for the backlight is usually included on the same controller board.

The low level interface of STN, DSTN, or TFT display panels use either single ended TTL 5 V signal for older displays or TTL 3.3 V for slightly newer displays that transmits the pixel clock, horizontal sync, vertical sync, digital red, digital green, digital blue in parallel. Some models (for example the AT070TN92) also feature input/display enable, horizontal scan direction and vertical scan direction signals.

New and large (>15") TFT displays often use LVDS signaling that transmits the same contents as the parallel interface (Hsync, Vsync, RGB) but will put control and RGB bits into a number of serial transmission lines synchronized to a clock whose rate is equal to the pixel rate. LVDS transmits seven bits per clock per data line, with six bits being data and one bit used to signal if the other six bits need to be inverted in order to maintain DC balance. Low-cost TFT displays often have three data lines and therefore only directly support 18 bits per pixel. Upscale displays have four or five data lines to support 24 bits per pixel (truecolor) or 30 bits per pixel respectively. Panel manufacturers are slowly replacing LVDS with Internal DisplayPort and Embedded DisplayPort, which allow sixfold reduction of the number of differential pairs.

The bare display panel will only accept a digital video signal at the resolution determined by the panel pixel matrix designed at manufacture. Some screen panels will ignore the LSB bits of the color information to present a consistent interface (8 bit -> 6 bit/color x3).

With analogue signals like VGA, the display controller also needs to perform a high speed analog to digital conversion. With digital input signals like DVI or HDMI some simple reordering of the bits is needed before feeding it to the rescaler if the input resolution doesn"t match the display panel resolution.

Kawamoto, H. (2012). "The Inventors of TFT Active-Matrix LCD Receive the 2011 IEEE Nishizawa Medal". Journal of Display Technology. 8 (1): 3–4. Bibcode:2012JDisT...8....3K. doi:10.1109/JDT.2011.2177740. ISSN 1551-319X.

Brody, T. Peter; Asars, J. A.; Dixon, G. D. (November 1973). "A 6 × 6 inch 20 lines-per-inch liquid-crystal display panel". 20 (11): 995–1001. Bibcode:1973ITED...20..995B. doi:10.1109/T-ED.1973.17780. ISSN 0018-9383.

K. H. Lee; H. Y. Kim; K. H. Park; S. J. Jang; I. C. Park & J. Y. Lee (June 2006). "A Novel Outdoor Readability of Portable TFT-LCD with AFFS Technology". SID Symposium Digest of Technical Papers. AIP. 37 (1): 1079–82. doi:10.1889/1.2433159. S2CID 129569963.

Kim, Sae-Bom; Kim, Woong-Ki; Chounlamany, Vanseng; Seo, Jaehwan; Yoo, Jisu; Jo, Hun-Je; Jung, Jinho (15 August 2012). "Identification of multi-level toxicity of liquid crystal display wastewater toward Daphnia magna and Moina macrocopa". Journal of Hazardous Materials. Seoul, Korea; Laos, Lao. 227–228: 327–333. doi:10.1016/j.jhazmat.2012.05.059. PMID 22677053.

Before purchasing any Smartphone, everyone goes through a list of specifications. This list includes display type, screen size, battery backup, supported operating system, total internal memory, and many others. Today, we have brought a comprehensive study of the significant display technologies available nowadays.

This article will introduce you to AMOLED vs OLED display technologies. Then, we will discuss the properties of both display technologies, followed by the difference between AMOLED vs OLED.

It stands for Natural Light-Emitting Diode, a type of LED technique that utilises LEDs wherein the light is of organic molecules that cause the LEDs to shine brighter. These organic LEDs are in use to make what are thought to be the best display panels in the world.

When you make an OLED display, you put organic films among two conductors to make them. As a result, a bright light comes out when electricity is used—a simple design with many advantages over other ways to show things.

OLEDs can be used to make emissive displays, which implies that each pixel can be controlled and emits its very own light. As a result, OLED displays have excellent picture quality. They have bright colours, fast motion, and most importantly, very high contrast. Most of all, “real” blacks are the most important.  The simple design of OLEDs also makes it easy to create flexible displays that can bend and move.

PMOLED stands for Passive Matrix Organic Light Emitting Diode. The PMOLEDs are easy to find and much cheaper than other LEDs, but they cannot work for a long duration as their lifespan is very short. Therefore, this type of display is generally for small devices up to 3 inches.

AMOLED stands for Active Matrix Organic Light Emitting Diode. This type of display is generally for large platforms. It contains TFT, which further consists of a storage capacitor. It also works on the same principle as OLED displays.

AMOLED offers no restriction on the size of the display. The power consumption of AMOLED is much less than other display technologies. The AMOLED provides incredible performance. It is thinner, lighter, and more flexible than any other display technology like LED, or LCD technology.

The AMOLED display is widely used in mobiles, laptops, and televisions as it offers excellent performance. Therefore, SAMSUNG has introduced AMOLED displays in almost every product. For example, Full HD Super AMOLED in Samsung Galaxy S4 and Samsung Galaxy Note 3, Super AMOLED in Samsung Galaxy S3, HD Super AMOLED in Samsung Galaxy Note, and HD Super AMOLED Plus in Samsung Galaxy S3. Apart from this, it is also used in AMOLED vs OLED creating the following:

So far, we have discussed OLED and AMOLED display technologies. Now, we will look at some of the differences between OLED and AMOLED display technology:

OLED comprises thin layers of the organic component, which emits light when the current passes through it. In this technology, each pixel transmits its own light. On the other side, AMOLED consists of an additional layer of thin-film transistors (TFTs). In AMOLED, the storage capacitors are used to maintain the pixel states.

While the technology is different among various manufacturers, Samsung’s edge AMOLED displays use plastic substrates with poly-Si TFT technology similar to how LG uses it in their POLED technology. This technology is what makes the possibility to build curved displays using an active-matrix OLED panel.

OLED display much deeper blacks as compared to the AMOLED displays. You cannot see the screen in AMOLED display under direct sunlight. The AMOLED display quality is much better than the OLEDs as it contains an additional layer of TFTs and follows backplane technologies.

These organic compounds are present between the protective layers of glass or plastic. Comparatively, AMOLED comprises an active matrix of OLED pixels along with an additional layer of TFTs. This extra layer is responsible for controlling the current flow in each pixel.

The OLED display offers a high level of control over pixels. Hence, it can be turned off completely, resulting in an excellent contrast ratio compared to the AMOLED displays and less power consumption. On the other side, AMOLED has faster refresh rates than OLEDs. Also, they offer a tremendous artificial contrast ratio as each pixel transmits light but consumes more power than OLEDs.

OLED displays are comparatively much thinner compared to the LCDs. Hence, it provides more efficient and bright presentations. In addition, OLED offers support for large display sizes compared to the traditional LCDs. AMOLEDs remove the limitation of display sizes. one can fit it into any display size.

Putting all the points mentioned above in view, the key difference to understand appropriately is that POLED is an OLED display with a plastic substrate. On the other hand, AMOLED is Samsung’s word for its display technology which is mainly for marketing. Therefore, most phone manufacturers having AMOLED displays mean that they are using Samsung displays. It is as simple as that. To add to that, all the curved display technology is made possible because of the usage of plastic substrate.

So, based on the points mentioned above, the difference between OLED and AMOLED displays, you can choose any of the two display technology at your convenience. Both are good, offer excellent performance, and are customised according to your requirements.

The AMOLED display has a higher quality than OLEDs since it has an additional layer of TTs and uses backplane technologies. When compared to OLED screens, AMOLED displays are far more flexible. As a result, they are substantially more expensive than an OLED display.

Window to the digital world, the display is one of the first seen features when selecting a smartphone, so a show must be good, and an AMOLED display offers the same. Offering a great viewing experience, here are the top 3 AMOLED screen smartphones available in the market right now:

Realme 8 Pro features a 6.4-inch Super AMOLED display with 411 PPI and a 2.5D curved display. It runs on Snapdragon 720G, bundled with Adreno 618 and 6GB of RAM. On the rear, the Realme 8 Pro has a quad-camera setup with 108-megapixels primary sensor, 8-megapixel ultra-wide angle sensor, 2-megapixel macro sensor, and a 2-megapixel monochrome sensor.

Coming to the front, it has a 16-megapixel selfie camera housed in the punch-hole display. It comes with a 4,500 mAh battery that supports Super Dart fast charging, with 100 per cent coming in just 47 min. The Realme 8 Pro is one of the best segments with a Super AMOLED FHD+ display. Media lovers will enjoy this phone with its deep blacks and vibrant colours.

The Xiaomi Mi 11 Lite runs on Snapdragon 732G chipset bundled with Adreno 618 GPU and up to 8GB RAM. The display front comes with a 6.55-inch AMOLED display with HDR 10+ support and 402 PPI.

The cameras have a triple rear camera setup with a 64-megapixel primary sensor, 8-megapixel ultra-wide angle sensor, and a 5-megapixel macro sensor. In addition, it has a 16-megapixel selfie camera housed in the punch-hole display on the front. It has a 4,250 mAh battery with 33W fast charging with USB Type-C. With the support for HDR 10+, the AMOLED display on the Mi 11 Lite is a treat for all media enthusiasts.

OPPO has recently launched the Oppo Reno 6 Pro with MediaTek’s Density 1200 chipset coupled with Mali-G77 MC9 GPU and up to 12GB of RAM. In addition, it comes with a 6.55-inch curved AMOLED FHD+ display with support for HDR 10+ and an Oleophobic coating.

On the rear, it comes with a quad-camera setup with a 64-megapixel primary sensor, an 8MP ultra-wide angle sensor, a 2-megapixel macro sensor, and a 2-megapixel depth sensor. In addition, it has a 32-megapixel selfie camera integrated inside the punch-hole on display on the front. It comes with a 4,500 mAh battery that supports 65W Super VOOC fast charging and can charge the phone 100 per cent in just 31 minutes. Since it comes with an FHD+ curved AMOLED display on the display front, it is a treat for gamers and media consumption lovers.

Smartphone displays have advanced significantly in recent years, more so than most people realise in this technological age. Display screens are similar to windows in the mobile world, which has seen a tremendous transformation in innovative products in the last several years. People have gotten more selective when buying a phone in recent years, and although all of the functions are important, the display is always the most noticeable.

If you want to buy a new monitor, you might wonder what kind of display technologies I should choose. In today’s market, there are two main types of computer monitors: TFT LCD monitors & IPS monitors.

The word TFT means Thin Film Transistor. It is the technology that is used in LCD displays.  We have additional resources if you would like to learn more about what is a TFT Display. This type of LCDs is also categorically referred to as an active-matrix LCD.

These LCDs can hold back some pixels while using other pixels so the LCD screen will be using a very minimum amount of energy to function (to modify the liquid crystal molecules between two electrodes). TFT LCDs have capacitors and transistors. These two elements play a key part in ensuring that the TFT display monitor functions by using a very small amount of energy while still generating vibrant, consistent images.

Industry nomenclature: TFT LCD panels or TFT screens can also be referred to as TN (Twisted Nematic) Type TFT displays or TN panels, or TN screen technology.

IPS (in-plane-switching) technology is like an improvement on the traditional TFT LCD display module in the sense that it has the same basic structure, but has more enhanced features and more widespread usability.

Both TFT display and IPS display are active-matrix displays, neither can’t emit light on their own like OLED displays and have to be used with a back-light of white bright light to generate the picture. Newer panels utilize LED backlight (light-emitting diodes) to generate their light hence utilizing less power and requiring less depth by design. Neither TFT display nor IPS display can produce color, there is a layer of RGB (red, green, blue) color filter in each LCD pixels to produce the color consumers see. If you use a magnifier to inspect your monitor, you will see RGB color in each pixel. With an on/off switch and different level of brightness RGB, we can get many colors.

Winner. IPS TFT screens have around 0.3 milliseconds response time while TN TFT screens responds around 10 milliseconds which makes the latter unsuitable for gaming

Winner. the images that IPS displays create are much more pristine and original than that of the TFT screen. IPS displays do this by making the pixels function in a parallel way. Because of such placing, the pixels can reflect light in a better way, and because of that, you get a better image within the display.

As the display screen made with IPS technology is mostly wide-set, it ensures that the aspect ratio of the screen would be wider. This ensures better visibility and a more realistic viewing experience with a stable effect.

Winner. While the TFT LCD has around 15% more power consumption vs IPS LCD, IPS has a lower transmittance which forces IPS displays to consume more power via backlights. TFT LCD helps battery life.

Normally, high-end products, such as Apple Mac computer monitors and Samsung mobile phones, generally use IPS panels. Some high-end TV and mobile phones even use AMOLED (Active Matrix Organic Light Emitting Diodes) displays. This cutting edge technology provides even better color reproduction, clear image quality, better color gamut, less power consumption when compared to LCD technology.

This kind of touch technology was first introduced by Steve Jobs in the first-generation iPhone. Of course, a TFT LCD display can always meet the basic needs at the most efficient price. An IPS display can make your monitor standing out.

Tried and trusted TFT technology works by controlling brightness in red, green and blue sub-pixels through transistors for each pixel on the screen. The pixels themselves do not produce light; instead, the screen uses a backlight for illumination.

By contrast the Active Matrix OLED (AMOLED) display requires no backlight and can light up or turn off each of their pixels independently. As the name suggests, they are made of organic material.

An AMOLED display has many other benefits which make it a superior looking display including exceptional vieiwng angles and a display that looks practically black when it is switched off.

So, why use a TFT display? Well, it is a mature technology meaning the manufacturing processes are efficient, yields high and cost much lower than AMOLED.

TFT displays also have a much longer lifespan than AMOLED displays and are available in a far greater range of standard sizes, which can be cut down to fit a space restricted enclosure for a relatively low cost adder.

Which type of display you choose really depends on your application, environment and users, so why not get in touch with us today to discuss your requirements.

Advancements in technology have led to better, brighter display systems, redefining our experience of viewing content. Better picture quality and crystal-clear images are some of the benefits of new displays such as AMOLED and IPS LCD

When choosing which television or mobile phone to buy, it’s essential to consider the display quality and technology. Here are the differences between Super AMOLED and IPS LCD screens, two of the forerunners in display technology, and an analysis of which one of the two is better.

LCD, short for liquid crystal display, has a flat panel display. It is an electronically controlled optical device that uses the liquid crystals" light-modified properties along with polarisers. The liquid crystals do not directly emit light. Hence, a reflector and a backlight generate images either in monochrome or colour. An LCD blocks the light instead of emitting it and is used more widely in televisions and basic smartphones. IPS, which stands for in-plane switching, is a screen technology for LCD.

AMOLED is short for Active Matrix Organic Light-Emitting Diodes. This type of OLED is usually incorporated in flagship smartphones and modern televisions. It uses the latest technology of a particular type of thin display. The organic compounds present in it produce electroluminescent material.

AMOLED has a thinner film transistor fixed to every LED alongside a capacitor. AMOLED and IPS LCD screens are made using three pixels—red, blue, and green. LCDs generate light through a backlight. With AMOLED displays, every pixel has a separate light source, eliminating the need for a backlight. As a result, the display assembly is thinner and provides consistent lighting throughout the complete screen.

Each of these displays has its specialities. Nevertheless, if we compare Super AMOLED display vs IPS LCD, the former is better because it integrates the latest technologies and has excellent performance.

IPS, also known as In-Plane Switching, is a type of monitor display and screen technology. More specifically, an IPS panel is a type of TFT LCD (or "active matrix" LCD). LCD, or Liquid Crystal Display, is the use of light modulating properties from unlit liquid crystals for providing a flat panel or electronic visual display. TFT, which stands for Thin Film Transistor, is an LCD display variant built and marketed for enhanced color, as well as contrast and black levels. The two most common types of TFT LCDs are IPS and TN displays.

The active matrix IPS TFT LCD was developed by Hitachi in 1996 as a solution to the display limitations of TN TFT LCDs (Twisted Nematic) from the late 1980s, which are standard non-IPS LCDs. The TN display is known for its flawed viewing angles, such as inverting colors at extreme angles, and poor color quality. By contrast, IPS displays provide wider viewing angles and higher quality color reproduction by altering pixels to be parallel, rather than perpendicular. In an IPS screen, the liquid crystals run parallel with the panels when energized. In a TN display, the crystals turn perpendicular to the top of the panel. High-performance tablets and smartphones deploy IPS display technology because these electronics are commonly used to watch movies, video chat and store photos. The improved angle and color technology features provide an overall better experience for the user. Creative professionals also benefit from an IPS monitor because an IPS LCD that provides a wider color gamut and greater viewing angles help achieve better aesthetic accuracy and superior results.

An IPS display, also known as an In-Plane Switching panel, is a type of high-quality display technology typically deployed in high-performance computer and laptop monitors, tablets and smartphones. IPS provides a better user experience because of its wider angle and enhanced color quality, display features which have evolved quite a bit over time since TN-effect LCD displays were introduced and ubiquitously used in the 1990s.

To help determine if IPS is best for your computing needs, first you"ll need to understand the display technology TFT LCD. TFT LCD stands for "Thin Film Transistor" and "Liquid Crystal Display." LCD uses polarizing material and liquid crystals to form a display. TFT LCDs, also known as "active matrix", were developed as a variant of LCD. TFT LCDs improved the color, contrast and response times of passive matrix LCDs.

The two most common types of TFT LCDs are IPS TFT LC and TN TFT LCD. TN generally has a faster response time, which provides better entertainment experiences for watching sports or gaming, but IPS was designed to solve TN display flaws, such as a poor viewing angle and low-quality color reproduction. If you use your laptop or smartphone for creative purposes, to watch movies, video chat or upload photo albums, you"ll want an IPS for the best viewing angles and color accuracy.

IPS (In-Plane Switching) is one of the most common types of TFT LCD display. TFT LCD enhances the image quality of a basic LCD display using thin-film transistor technology. IPS LCD, which is a variant of (active matrix) TFT LCDs, further improves display technology by providing better color reproduction and a wider, more accurate viewing angle. IPS TFT LCD technology is widely used for high-performance computers, laptops, tablets and smartphones.

LCD stands for Liquid Crystal Display. It"s a thin screen type that formulates a bright panel display using two layers of polarized panels and a liquid crystal solution. Light projects through the liquid crystals to produce an image, yet because the liquid crystals are unlit, they need a backlight.

TFT LCDs (also known as active matrix LCDs) were developed to produce greater color, contrast and response times in LCD displays. The two most common types of TFT LCDs include TN TFT LCDs (standard non-IPS) and IPS TFT LCDs. A monitor with an IPS display provides enhanced features, such as optimal viewing angles, color accuracy, invariable color reproduction and better power consumption. In summary, IPS is a variant of TFT LCDs that improves upon technological limitations within TN panels that have been flawed by poor viewing angles and color reproduction.

Lenovo"s ThinkPad X Series Laptops offer high-performance lightweight laptops designed with IPS (In-Plane Switching) technologies. The ThinkPad X1 Carbon Ultrabook provides a stunning display produced by the ThinkPad ColorBurst Display, an antiglare screen and 300 nit with IPS features that provides 180-degree, wide-screen viewing. Nit is the standard measurement of luminance or candela per square meter. Units with a nit of 300 produce greater screen brightness and clarity, so you can expect clear text, bright imaging, true coloring and an anti-smudge screen.

The ThinkPad X240 Ultrabook Laptop, also part of the ThinkPad X Series, is equipped with HD display and IPS technology. The ultrabook"s IPS technology ensures exceptional user experiences by providing features that display high levels of brightness, rich and vivid coloring and 180-degree viewing angles.

Lenovo also offers tablets with HD display and IPS multipoint touch screens providing bright and crisp viewing. Experience the high performance of IPS LCD technology with IdeaTab, Yoga, ThinkPad and Lenovo Miix 2 tablet series. The Lenovo Miix 2 8-inch and 10-inch tablets in particular feature spectacular IPS displays with full HD.

For a full list of Lenovo PC desktops with IPS technology, visit the Desktops & All-in-Ones page on the Shop Lenovo page. Learn more about premium performance ThinkCentre and stylish IdeaCentre desktops with HP and frameless IPS displays that create high brightness, color vibrancy and a wide viewing angle.

AMOLED and TFT are two types of display technology used in smartphones. AMOLED (active-matrix organic light-emitting diode) displays are made up of tiny organic light-emitting diodes, while TFT (Thin-Film Transistor) displays use inorganic thin-film transistors.

AMOLEDs are made from organic materials that emit light when an electric current is passed through them, while TFTs use a matrix of tiny transistors to control the flow of electricity to the display.

Refresh Rate: Another key difference between AMOLED and TFT displays is the refresh rate. The refresh rate is how often the image on the screen is updated. AMOLED screens have a higher refresh rate than TFT screens, which means that they can display images more quickly and smoothly.

Response Time: The response time is how long it takes for the pixels to change from one colour to another. AMOLED screens have a shorter response time than TFT screens..

Colour Accuracy/Display Quality: AMOLED screens are more accurate when it comes to displaying colours. This is because each pixel on an AMOLED screen emits its own light, which means that the colours are more pure and true to life. TFT screens, on the other hand, use a backlight to illuminate the pixels, which can cause the colours to appear washed out or less vibrant.

Viewing Angle: The viewing angle is the angle at which you can see the screen. AMOLED screens have a wider viewing angle than TFT screens, which means that you can see the screen from more angles without the colours looking distorted.

Power Consumption: One of the main advantages of AMOLED displays is that they consume less power than TFT displays. This is because the pixels on an AMOLED screen only light up when they need to, while the pixels on a TFT screen are always illuminated by the backlight.

Production Cost: AMOLED screens are more expensive to produce than TFT screens. This is because the manufacturing process for AMOLED screens is more complex, and the materials used are more expensive.

Availability: TFT screens are more widely available than AMOLED screens and have been around for longer. They are typically used in a variety of devices, ranging from phones to TVs.

Usage: AMOLED screens are typically used in devices where power consumption is a concern, such as phones and wearable devices. TFT screens are more commonly used in devices where image quality is a higher priority, such as TVs and monitors.

AMOLED and TFT are two different types of display technology. AMOLED displays are typically brighter and more vibrant, but they are more expensive to produce. TFT displays are cheaper to produce, but they are not as bright or power efficient as AMOLED displays.

The display technology that is best for you will depend on your needs and preferences. If you need a screen that is bright and vibrant, then an AMOLED display is a good choice. If you need a screen that is cheaper to produce, then a TFT display is a good choice. However, if you’re worried about image retention, then TFT may be a better option.

Nauticomp Inc.provides world-class fully customizable touchscreen displays for commercial and industrial settings. With features like sunlight readability, brightness adjustability, infrared lighting, full backlighting, all-weather capabilities, etc., our displays are second to none. Contact us today to learn more.