lcd touch screen development kit quotation

CCS introduces a new Graphics and Touch Library and Interface Designer software in the CCS C Compiler. This package has every thing you need to quickly and easily develop a Graphical User Interface (GUI) using a graphics LCD and touchscreen. The package consists of a C library for drawing on an LCD and handling touch input, a software package for designing a GUI to be displayed using the C library, and a development kit to get started with the package very easily.

The C library displays bitmap images that are stored on an external memory device, for example an external flash. The library provides the functions gfx_LoadImage() and gfx_EraseImage() for easily loading and erasing images from the external memory. In addition the graphics library provides a method for loading and displaying custom fonts. The functions gfx_LoadFont() and gfx_EraseFont() are provided to easily load and remove custom fonts. The following is a list of functions in the library used to control what is displayed on the graphics LCD:gfx_InitGraphics()

For the touch portion of the C library the functions gfx_TouchTask() and gfx_SetTouchCallback() are provided to use it. The gfx_TouchTask() function is a task function that needs to be called at least once per main loop to process touches. The gfx_SetTouchCallback() function is used to set the user function that is called by gfx_TouchTask(). In addition the gfx_InitGraphics() function needs to be called to set the calibration values of the touchscreen.

TouchGFX is a unique software framework that unlocks the graphical user interface (GUI) performance of your low-resource hardware. The revolutionizing technology breaks existing restraints, as it lets you create sophisticated GUIs that fully live up to today’s smartphone standards at a fraction of the cost.

emWin is designed to provide an efficient, processor- and LCD controller-independent graphical user interface (GUI) for any application that operates with a graphical LCD. It is compatible with single-task and multitask environments, with a proprietary operating system or with any commercial RTOS. emWin is shipped as “C” source code. It may be adapted to any size physical and virtual display with any LCD controller and CPU.

Crank™ Software Inc. is an innovator in embedded user interface (UI) solutions. Compared to traditional electronic design automation tools, Crank’s products and services enable R&D teams to more quickly develop rich graphical displays—also called UIs or HMIs—for resource-constrained embedded devices. Applications include in-car graphical displays, animated GPS systems, and rich user interfaces on factory floors. Crank Software bridges the gap between UI design and embedded systems to deliver competitive advantage because streamlining the development lifecycle enables their customers to get products to market faster, with higher ROI and lower TCO, while delivering a superior customer experience. Crank Storyboard™ Designer enables user interface (UI) designers to easily prototype the look and feel of a product, and then deploy a production-ready interface directly to the embedded target. Designers maintain full control over the UI and user experience (UX) without having to perform a hand off to an embedded systems engineer for implementation.

J-Link Product PageSEGGER J-Links are the most widely used line of debug probes available today. They’ve been proven for more than 10 years with over 250,000 units sold, including OEM versions and on-board solutions. This popularity stems from the unparalleled performance, extensive feature set, large number of supported CPUs, and compatibility with all popular development environments.

Development kits include all the downloads and documentation you need to get up-and-running. Watch videos to see how to set up a development kit and then visit product pages to get all the other materials you will need. How to get started varies based on controller board type. Toggle by product type (SLCD, G1C1 or G2H2) below to get more information.

ER-TFTM035-6 is 320x480 dots 3.5" color tft lcd module display with ILI9488 controller and breakout board,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO,ARM and Raspberry PI.It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.

It supports 8080 8-bit /9-bit/16-bit /18-bit parallel ,3-wire,4-wire serial spi interface.Built-in microSD card slot, optional 3.5" 4-wire resistive touch panel with controller XPT2046 and capacitive touch panel with controller FT6236, so you can detect finger presses anywhere on the screen and doesn"t require pressing down on the screen with a stylus and has nice glossy glass cover . It"s optional for font chip, flash chip and microsd card. We offer two types connection,one is pin header and the another is ZIF connector with flat cable mounting on board by default and suggested. Lanscape mode is also available.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for 3.5"TFT Touch Shield with Libraries, EXxamples.Schematic Diagram for Arduino Due,Mega 2560 and Uno . For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and development kit at the bottom of this page.

ER-TFTM070-4V2.1 is the updated version of ER-TFTM070-4,that is 800x480 dots 7" color tft lcd module display with ssd1963 controller board,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO, and ARM .It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.

It supports 6800, 8080 8-bit /9-bit/16-bit/18-bit/24-bit parallel interface.Built-in MicroSD card slot.It"s optional for resistive touch panel and controller XPT2046,capacitive touch panel and controller FT5206, font chip, flash chip and microsd card. We offer two types connection,one is pinheader and the another is ZIF connector with flat cable mounting on board by default and suggested.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for7" TFT capacitive touch shield with libraries,examples,schematic diagram for Arduino Due,Mega 2560 and Uno. For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and development kit at the bottom of this page.

IS-ENG-KIT-7-DS, IS-ENG-KIT-7-FS, IS-ENG-KIT-7-FF, IS-ENG-KIT-8-R, IS-ENG-KIT-6-DH, IS-ENG-KIT-6-SH, IS-ENG-KIT-6-CH, IS-ENG-KIT-5-DC, IS-ENG-KIT-5-SC, IS-ENG-KIT-5-BC.

IS-DEV-KIT-9, IS-DEV-KIT-8, IS-DEV-KIT-7, IS-DEV-KIT-7D, IS-DEV-KIT-6, IS-DEV-KIT-6C, IS-DEV-KIT-6D, IS-DEV-KIT-5, IS-DEV-KIT-5C, IS-DEV-KIT-5D, AT9946-93G, AT9946-091B, AT9946-099A, IS-S0109DEM, IS-CL04FL

Programmable display graphics for alphanumeric characters and animated sequences. 64 colors of backlighting can be controlled dynamically. Pushbutton switch with LCD, RGB LED backlighting.

64 colors of backlighting can be controlled dynamically. Pushbutton switch with LCD, RGB LED backlighting. Low energy. Dust-tight construction. Viewing area: 17.0mm x 13.0mm (horizontal x vertical).

Broad and even light distribution. Consistent backlighting. Low energy consumption. Programmable LCD with a variety of LED backlighting colors. Rubber dome.

Low-energy-consumption programmable LCD with a variety of LED backlighting colors. Rubber dome. High reliability and long life of one million actuations minimum.

Part Number: IS-S04G1LC-S -- Human-Machine Interface with four programmable 64x32 LCD SmartDisplay pushbuttons that monitor and control four 7V-12V fans or lights over eight levels of speed/brightness

1. We would like to get quotation of 21.5" LCD panel and Touchscreen. We can not find Touchscreen 21.5", do you have this one? Also to compare the cost, we will be glad if you give us quotation with 15.6" LCD and touchscreen as well. Thanks and best regards,

8. We are looking for 0.95" to 1.1" Amoled displays with integrated touch. It should be a rectangular shape display with SPI interface. Please share the Datasheet, MOQ details, Sample availability for the proposed display. Best Regards

9. I"m looking for a circular touch screen display for our next product. please send all details about the same disply. the size should not more than 35 mm in diameter. thank you

11. Hello, I am interested in the price of the screen for different volumes and the price for samples. It would be possible obtain the datasheet? It is possible convert the screen in a touch screen? Thanks

M5Paper v1.1 is M5Stacks latest core device with a touch enabled E-ink display. Powered by the ESP32-D0WDQ6-V3 this is our first device to integrate a super sized 540*960 @4.7" E-ink display,which supports 16 gray scale levels. The display is a GT911 capacitive touch screen,which supports two point touch and a variety of gesture controls . Compared to a regular LCD,E-ink displays are easier on the eyes, which makes them a great choice for reading or viewing for longer periods. Other benefits are the low power consumption and the ability to retain the image even if power to the display is terminated. Integrated in the CoreInk are an multi-function button for operation, SHT30 temperature and moisture sensor, physical buttons and an TF-card(microSD) port for data storage.

M5Paper v1.1 adopts flexible e-Ink screen panel, which is the same model as that of M5Paper v1.0 hard e-Ink screen panel. All features and specs are the same for both models. We are using CP2104 and CH9102 as the USB serial chip in alternative. Please install the relevant USB driver according to your device.

Arduino 2.4" TFT LCD Touch shield V2 is an Arduino UNO/ Mega compatible, multicolored TFT display with touch-screen and SD card socket as well. It is available in an Arduino shield compatible pinout for attachment. The TFT driver is based on ILI9341, with 8bit data and 4bit control interface.