ssd1963 tft lcd factories supplier

Our development depends on the advanced equipment ,excellent talents and continuously strengthened technology forces for Ssd1963 Stm32, Tft Monitor Device, Round Lcd, Industrial Control Equipment Touch Screen,Tft Multimedia Color Monitor. With superb service and quality, and an enterprise of foreign trade featuring validity and competitiveness, that will be trusted and welcomed by its clients and creates happiness to its employees. The product will supply to all over the world, such as Europe, America, Australia,Iraq, Bulgaria,Bolivia, Saudi Arabia.In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.

ER-TFTM070-4V2.1 is the updated version of ER-TFTM070-4,that is 800x480 dots 7" color tft lcd module display with ssd1963 controller board,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO, and ARM .It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for7" TFT capacitive touch shield with libraries,examples,schematic diagram for Arduino Due,Mega 2560 and Uno. For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and development kit at the bottom of this page.

ER-TFTM090-1 is 800x480 dots 9"color tft lcd module display with SSD1963 controller board,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051(C51), PIC, AVR, ARDUINO, and ARM and Raspberry PI .It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.Portrait mode is also available.

Of course, we wouldn"t just leave you with a datasheet and a "good luck!".Here is the link for 9 TFT Touch Shield with Libraries, Examples.Schematic Diagram for Arduino Due,Mega 2560,Uno. For 8051 microcontroller user,we prepared the detailed tutorial such as interfacing, demo code and development kit at the bottom of this page.

The WF43QTIBEDBND is a 4.3 inch TFT LCD Display which is Winstar WF43H extended model with SSD1963 controller board plus a 36 pin-out connector on board. The model is available in 8080 family MPU 8 bit or 16 bit interface option and pre-defined pin no. 33 ~ 36 as backlight supply; so there is no need to design extra backlight circuit. This 4.3" TFT LCD panel is feature with Glare coating surface panel having benefited of less-reflective.

Winstar Q series is support with Solomon SSD1963 Which has the traditional inputs and drive TFT by VESA signal. Therefore, there is no need of T-COM circuit on board. Besides, we have integrated all functions including TFT connection, backlight driver, and touch panel into only one connection.

Raystar is a global leading LCD panel supplier and specialized in producing TFT LCD Panel, including Color TFT, Monochrome TFT Display and bar type TFT Display. Raystar Color TFT displays are available in various resolutions and offers a wide product range of small to medium-sized TFT-LCD modules from 0.96” to 12.3". The interface options are in MCU / RGB / SPI / UART / 8080 / LVDS. TFT Panel with control board or TFT LCD Panel with micro controller are also available.

Established in 1998, Winstar Display Co. Ltd has devoted itself to the manufacturing and development of high-quality products for Industrial LCD Displays including monochrome TN/STN/FSTN LCM, COG LCD, VATN-LCD, TFT, and OLED LCD display modules. Winstar has become one of the leading display manufacturing companies in the field of small & medium-sized displays and its continuous innovation allowed it to secure several global patents.

Winstar provides products and services with high price-performance as well as the logistics support to deliver products and services competitively. Winstar Display is an ISO approved manufacturer for both quality ISO9001 and environment ISO14001 certificated manufacturer. Qualified engineers and production management that making Winstar Automotive TS16949 certified. As a leader manufacturer in the display module market, Winstar will continue to be dedicated the research & development, design, of the new technology of LCD, TFT, OLED displays, and embedded systems.

Winstar offers a wide range of standard and full or semi-custom design industrial displays, PMOLED, and LCM modules. Our LCM module product lines are including monochrome TN/STN/FSTN Character LCD and Graphic LCD modules, COG LCD, FSC-LCD, VATN LCM Module, TFT LCD displays, and PMOLED display modules. In order to support these products, Winstar technical team can support customers a total custom solution and a wide range of semi-custom including add connectors, ZIP, FPC, touch panel, interconnect solutions, and development control boards. Winstar Embedded System technical team can offer customers motherboard, and with TFT display solutions.

We have thousands of standard products that are in stock and available from our Seattle, WA and Hong Kong warehouses to support fast product development and preproduction without MOQ. The stock covers TN, STN LCD display panels, COB, COG character LCD display, graphic LCD display, PMOLED, AMOLED display, TFT display, IPS display, high brightness and transflective, blanview sunlight readable display, super high contrast ratio display, lightning fast response displays, efficient low power consumption display, extreme temperature range display, HMI display, HDMI display, Raspberry Pi Display, Arduino display, embedded display, capacitive touch screen, LED backlight etc.  Customers can easily purchase samples directly from our website to avoid time delays with setting up accounts and credit terms and shipping within 24 hours.

Many of our customers require customized OEM display solutions.  With over two decades of experience, we apply our understanding of available display solutions to meet our customer’s requirements and assist from project concept to mass production. Using your ideas and requirements as a foundation, we work side by side with you to develop ideas/concepts into drawings, build prototypes and to final production seamlessly. In order to meet the fast changing world, we can provide the fastest turnaround in the industry, it takes only 3-4 weeks to produce LCD panels samples and 4-6 weeks for LCD display module, TFT LCD, IPS LCD display, and touch screen samples. The production time is only 4-5 weeks for LCD panels and 5-8 weeks for LCD display module, TFT LCD, IPS LCD display, and touch screen.

4.3″ 480 x (RGB) x 272 Transmissive Color TFT Display Phoenix Display International PDI043WQBS-36 is a small-size 4.3” color TFT liquid crystal display (LCD) with a module size of 105.4 x 67.1 x 2.9 mm, and active area 95.04 x 53.86 mm. This product is TFT, Normally White, Transmissive glass with a 480 * RGB * 272 resolution. Its brightness is 500 nits with a contrast ratio of 600. Using a ST7282 driver with a RGB interface and a zero insertion force (ZIF) type flex interconnect. This product offers improved contrast , color saturation and…

4.3″ 480 x (RGB) x 272 Transmissive Color TFT Display Phoenix Display International PDI043WQBS-36C is a small-size 4.3” color TFT liquid crystal display (LCD) with a module size of 123.04 x 84.46 x 4.63 mm, and active area 95.04 x 53.86 mm. This product is TFT, Normally White, Transmissive glass with a 480 * RGB * 272 resolution. Its brightness is 400 nits with a contrast ratio of 600. Using a ST7282 driver with a RGB interface and a zero insertion force (ZIF) type flex interconnect. This product offers improved contrast , color saturation and…

4.30” 192 x 96 Graphic Display The G-1929601C-VA is a 4.30” 192 x 96 Monochrome LCD Display with a module size of 128.0 x 85.6 x 11.0 and an active area of 99.8 x 46.0. The G-1929601C-VA 192 x 96 display uses Super Twisted Nematic or Film Compensated Super Twisted Nematic glass with no backlighting and a reflective, transflective, or transmissive display. View Additional Details Generic Part G-1929601C-VA Display Format 192 x 96 Graphic Display Module Size 128.0 x 85.6 x 11.0 Diagonal 4.30 Active Area 99.8 x 46.0 Pixel Pitch 0.520 x 0.480 Backlight No…

4.60” 320 x 200 Graphic Display The G-32020001T-VA is a 4.60” 320 x 200 Monochrome LCD Display with a module size of 114.9 x 75.4 x 21.0 and an active area of 100.78 x 58.98. The G-32020001T-VA 320 x 200 display uses Super Twisted Nematic or Film Compensated Super Twisted Nematic glass with LED backlighting and a reflective, transflective, or transmissive display. View Additional Details Generic Part G-32020001T-VA Display Format 320 x 200 Graphic Display Module Size 114.9 x 75.4 x 21.0 Diagonal 4.60 Active Area 100.78 x 58.98 Pixel Pitch 0.315 x 0.295 Backlight LED…

320 x 240 4.70” Graphic Display The PDI320240D1-TFH-VZ# is a 4.70” 320 x 240 Monochrome LCD Display with a module size of 142.0 x 96.0 x 15.7 and an active area of 96.0 x 72.0. The PDI320240D1-TFH-VZ# 320 x 240 display uses Super Twisted Nematic or Film Compensated Super Twisted Nematic glass with LED backlighting and a reflective, transflective, or transmissive display. View Additional Details Generic Part PDI320240D1-TFH-VZ# Display Format 320 x 240 Graphic Display Module Size 142.0 x 96.0 x 15.7 Diagonal 4.70 Active Area 96.0 x 72.0 Pixel Pitch 0.300 x 0.300 Backlight…

4.70” 320 x 240 Graphic Display LCD The PDI320240E-TFH-VZ# is a 4.70” 320 x 240 Monochrome LCD Display with a module size of 143.0 x 96.8 x 12.6 and an active area of 96.0 x 72.0. The PDI320240E-TFH-VZ# 320 x 240 display uses Super Twisted Nematic or Film Compensated Super Twisted Nematic glass with LED backlighting and a reflective, transflective, or transmissive display. View Additional Details Generic Part PDI320240E-TFH-VZ# Display Format 320 x 240 Graphic Display Module Size 143.0 x 96.8 x 12.6 Diagonal 4.70 Active Area 96.0 x 72.0 Pixel Pitch 0.300 x 0.300…

320 x 240 4.70” Graphic Display LCD The PDI320240K-TFH-VZ# is a 4.70” 320 x 240 Monochrome LCD Display with a module size of 142.0 x 96.0 x 13.1 and an active area of 96.0 x 72.0. The PDI320240K-TFH-VZ# 320 x 240 display uses Super Twisted Nematic or Film Compensated Super Twisted Nematic glass with LED backlighting and a reflective, transflective, or transmissive display. View Additional Details Generic Part PDI320240K-TFH-VZ# Display Format 320 x 240 Graphic Display Module Size 142.0 x 96.0 x 13.1 Diagonal 4.70 Active Area 96.0 x 72.0 Pixel Pitch 0.300 x 0.300 Backlight…

4.70” 320 x 240 Graphic Display The PDI320240O-TFH-VZ# is a 4.70” 320 x 240 Monochrome LCD Display with a module size of 139.0 x 100.0 x 13.1 and an active area of 99.0 x 72.0. The PDI320240O-TFH-VZ# 320 x 240 display uses Super Twisted Nematic or Film Compensated Super Twisted Nematic glass with LED backlighting and a reflective, transflective, or transmissive display. View Additional Details Generic Part PDI320240O-TFH-VZ# Display Format 320 x 240 Graphic Display Module Size 139.0 x 100.0 x 13.1 Diagonal 4.70 Active Area 99.0 x 72.0 Pixel Pitch 0.300 x 0.300 Backlight LED Display…

4.70” 160 x 128 Graphic Display The G-16012804C-VA is a 4.70” 160 x 128 Monochrome LCD Display with a module size of 129.0 x 102.0 x 14.0 and an active area of 92.76 x 74.2. The G-16012804C-VA 160 x 128 display uses Super Twisted Nematic or Film Compensated Super Twisted Nematic glass with LED backlighting and a reflective, transflective, or transmissive display. View Additional Details Generic Part G-16012804C-VA Display Format 160 x 128 Graphic Display Module Size 129.0 x 102.0 x 14.0 Diagonal 4.70 Active Area 92.76 x 74.2 Pixel Pitch 0.580 x 0.580 Backlight…

TSD as LCD display manufacturer and solution provider always adhering to the vision :Let each piece of LCD display module can be used stably in the client side and make values .