transflective color tft display quotation

Phoenix Display International PDI350MTQI-02 is a small-size 3.5” color transflective TFT liquid crystal display (LCD) with a module size of 64.0mm x 85.0mm x 3.0mm and active area of 53.64mm x 71.52mm.This product is a-Si TFT, Positive, transflective glass with a 262K color 320 x 240 resolution. Its brightness is 115 nits with a contrast ratio of 150. Using an ILI9341 driver with an RGB 8bit interface and a ZIFF type interconnect. This product offers improved contrast, color saturation and response time. Similar product(s): PDI350MTQI-02 has lower brightness (80 nits) and has a SPI interface. All our color displays products can be modified to be sunlight-readable, and touch panels can added or removed upon request (there may or may not be tooling associated with sunlight readability or touch-panel changes).

This 3.5" display is transflective, meaning it both reflects light and uses a backlight making it viewable in a wide variety of lighting scenarios without needing a high-powered backlight.

This display also boasts high pixel density at 228 ppi - that means you can pack a ton of detail onto this display. Plus, with the option of using either 65k or 262k color over RGB (with SPI initialization) you"ll have plenty of control over the color depth.

Further, this display offers wide viewing angles in all directions, so you don"t have to worry about the angle the user will be viewing the display at.

This display really offers the best of all worlds - visible in most lighting situations, at just about any angle, and able to display a huge amount of detail - all with low power consumption.

The CFAF480640B-035T-TS has a transflective polarizer, and therefore is sunlight readable. The TFT display resolution is 480x640 (portrait) 640x480 (landscape) (VGA, 480xRGBx640, 640x480xRGB), can display 262,000 colors, uses active matrix addressing, and measures 3.5" diagonally. This display also features a 4-wire resistive touch screen, which allows the use of the touch screen while wearing gloves and other insulating materials. It has 10 bright white, series LEDs and the transflective polarizer looks great both in the sun and in the dark. It uses a polarizer specifically designed to provide a wide viewing cone from all sides of the display. This TFT display is perfectly suited for both indoor and outdoor use. Did we mention that the transflective polarizer makes it fully readable in direct sunlight? That same direct sunlight makes the viewing of ordinary TFT displays extremely difficult, but the CFAF480640B-035T-TS is unaffected.

Do you like the display but don"t need the touch screen? The CFAF480640A-035T is the same TFT without a touch screen. It is slightly thinner and the price is lower.

With an active area of 53.57x71.42mm and a resolution of 640 x 480 (landscape) or 480 x 640 (portrait), this display has a very high pixel density. The Himax HX8363-A or compatible controller in this sunlight readable TFT display is the HX8363A which exposes a generic RGB interface so you won"t run into any trouble getting the display up and running. The logic voltage range of 2.5v to 3.3v allows direct connection to 3.3v processors.

The 10 white LED series backlight ( ~29.5v typical) will require a current-controlled boost LED driver. The series LED configuration guarantees perfect current matching across the 10 LEDs. We have an example of a suitable LED driver circuit shown in the schematic of the CFA10065 breakout board. We think you"ll be pleasantly surprised to see this display looking great for its expected lifetime of at least 20,000 hours -- longer if you dim or turn off the backlight when not in use.

This display is perfect for situations with changing levels of ambient light from darkness to direct sunlight. Examples include in dash or dash mounted electronics, exterior status displays, software keypads, and hypersonic railgun coordinate entry systems.

This display is available as a standalone part but it can also be purchased with a Breakout Board + Display below. This breakout board brings LCD connections out to 0.1" center pins, and includes the current controlled backlight driver. Perfect for prototyping into your project.

Alternatively, if you need something you can take out of the box and plug in, our Demonstration Kit is for you. Simply plug in the supplied power adapter and the demonstration board will start displaying a slide show on the display. No soldering or coding required.

FSTN White background, White Edge-lit LED backlight, bottom (or 6:00) viewing angle, Transflective polarizer, RoHS Compliant. Available in both 3-volt or 5-volt power supply options.This display has a wide temperature range: -20° Celcius to +70° Celcius which equates to (-4° Fahrenheit to +158° Fahrenheit).

FSTN (Film-compensated Super-twisted Nematic) provides a sharper contrast than STN by adding a film. The cost is approximately 5% higher than STN. FSTN works great for indoor and outdoor applications and is mainly used in graphic displays and higher end products. The Transflective polarizer is a mixture of Reflective and Transmissive. It provides the ability to read the LCD with or without the backlight on. It will work for all lighting conditions from dark with backlight to direct sunlight which makes it the most common choice. There is no cost difference between Transflective, Transmissive and Reflective.

Focus LCDs can provide many accessories to go with your display. If you would like to source a connector, cable, test jig or other accessory preassembled to your LCD (or just included in the package), our team will make sure you get the items you need.Get in touch with a team member today to accessorize your display!

Focus Display Solutions (aka: Focus LCDs) offers the original purchaser who has purchased a product from the FocusLCDs.com a limited warranty that the product (including accessories in the product"s package) will be free from defects in material or workmanship.

Newhaven 16x1 character Liquid Crystal Display shows characters with dark pixels on a bright amber background when powered on. This transflective LCD Display is visible with ambient light or a backlight while offering a wide operating temperature range from -20 to 70 degrees Celsius. This NHD-0116GZ-FSA-FBW display has an optimal view of 6:00. This display operates at 5V supply voltage and is RoHS compliant.

Easily modify any connectors on your display to meet your application’s requirements. Our engineers are able to perform soldering for pin headers, boxed headers, right angle headers, and any other connectors your display may require.

Choose from a wide selection of interface options or talk to our experts to select the best one for your project. We can incorporate HDMI, USB, SPI, VGA and more into your display to achieve your design goals.

Thin-Film Transistor Liquid Crystal Displays use thin-film transistors to control the voltage applied to the liquid crystal layer at a sub-pixel level. The structure of TFT LCDs consists of a TFT “sandwich” and a BLU (Backlight Unit). A typical configuration is shown in the schematic diagram below.

Firstly, between the back and front polarizers, TFT LCD cells are made with two glass substrates – one for color filters, the other for a TFT array – and a liquid crystal layer sandwiched in between.

For normally black TFT LCDs, if we follow along a piece of light setting off from its backlight source, it will bea)guided uniformly by LGP;b)reflected and enhanced by BEF and DBEF;c)polarized by the back polarizer;d)polarization changed by twisted LC under the voltage applied by TFT arrays;e)“tinted” red/green/blue by corresponding color filter of the subpixel;f)let through the front polarizer by matched polarization; andg)finally, it will reach the surface and appears in viewer’s eyes.

For normally white panels, processd)will be the opposite – known as the polarization rotation effect, light is twisted in a voltage-off stage and can pass through the front polarizer by default, thus displaying white normally. However, when the voltage applied increases, this polarization rotation effect would be gradually diminished. And the light would not be able to pass through the front polarizer anymore without changing its polarization. In this way, certain pixels will appear in different colors.

Normally black LCDs have higher contrast and wider viewing angles without grayscale inversion phenomenon compared to their normally white relatives. And whether TFT LCDs are normally black or white depends on their LC switching mode:

2Chen, HW., Lee, JH., Lin, BY.et al.Liquid crystal display and organic light-emitting diode display: present status and future perspectives.Light Sci Appl7,17168 (2018).https://doi.org/10.1038/lsa.2017.168

Schematic diagram of the (a) TN mode, (b) VA mode, (c) FFS mode, and (d) IPS mode. *LC orientations shown are under applied voltages. C/F stands for the color filter.

As previously mentioned, TN mode functions with the polarization rotation effect. Under traditional TN/VA display mode, the liquid crystal molecules are vertically arranged, with a relatively narrow visual angle. When an external force is exerted on the screen, the liquid crystal molecular structure will sink in a herringbone pattern to slowly recover – a pattern called vertical alignment. Therefore, an evident “water ripple” usually appears when the display surface is touched and impacts the user experience. In comparison, the VA mode provides higher contrast. And MVA (multi-domain vertical alignment) is an upgraded version of VA with improved viewing angles.

Sunlight readable tft lcd display included color transflective tft lcd and high brightness tft lcd,both high brightness tft LCD (transmissive display) and transflective lcd are viewable under sunlight conditions, butwhich one would be the most suitable sunlight redable lcd display for your application? let"s see the comparison in the following article.

Compare to transmissive display, transflective TFT has a reflector layer inside tft lcd cell that is in front of the backlight. The incoming light is reflected and used to illuminate the TFT display. Transflective TFT have both "transmissive" and "reflective" modes.

Both display modes work together for enhanced performance, as a result, the performance of the display content in very bright light is perfect even without any backlight on the transmissive tft lcd. Customers using a transflective TFT LCD module can save power by reducing or turning the display"s backlight off during bright environments.

Transflective TFT become more popular since the demand of requiring good performance in bright environments and direct sunlight.so that the transflective TFT displays are perfectly readable under almost any ambient light conditions. In addition, they arevery energy efficient, making them ideal for battery powered devices and mobile applications.

In the following, we make a full comparison about the high brightness tft lcd vs transflective tft lcd display in the technical parameters, display performance, and cost evaluation. After read this article, you would get a deep comprehension about sunlight readable display tft, and how to select sunlight readable tft lcd display, to choose a most suitable transflective tft lcd or high brightness tft lcd (transmisive display) for your outdoor display.

them ideal for battery powered devices and mobile applications.Customers using a transflective screen can save power by reducing or turning off the display’s backlight during bright

ratio only about 2%, they are not a significant transflective tft lcd, it is the alternative transflective lcd solution that the reflective layer is located on the back polarizer, not in the color filter, the 2% reflective ratio is too low to say it is transflective

its cost around 18 USD,So transflective tft lcd is good, but are you ready to pay more cost about your sunlight readable tft lcd display, I hope you had a answer after read this article.

When transflective LCD technology used in regular TFT LCD with a reflective function. via the imposed reflective function, the modified tft LCD can reflect the ambient light passing the LCD cell and utilize the reflected light beams as its illumination. The stronger the ambient light is, the brighter the LCD will be needed.Transflective LCD modules are with both transmissive and reflective properties, and the image display effect depends on the conditions of the ambient environment. for transflective tft lcd, the tft lcd display uses a backlight with a transmissive property in dark environments, and uses external light with a reflective property in bright environments. so the transflective lcd method allows for better color performance than transmissive tft lcd with same backlight brightness, then the transflective lcd provides similar color characteristics similar to the transmissive mode that indoor. The net Reflectance rate of regular Transflective LCD solution is from 0.9% to 8% varied from panels selected. For example, with 1.3% net reflectance rate and under 10,000 ambient sunlight conditions, the brightness gain is around 130 nits added to original backlight brightness.

You could also find more information about "what makes best sunlight readable lcd display" here :https://www.szmaclight.com/new/Sunlight-readable-display.html

When it is a positive and reflective display, it can display without LED backlight; when it is a positive and transmissive/ transflective display, it can’t display without LED backlight,the background color could be grey-white or grey-green, and the letters could be black/purple/blue.

When it is a negative and transmissive/ transflective display, it can’t display without LED backlight, the background could be dark-purple/ blue/ black (not pure) and the color of the letters is the color of LED backlight.

By the way, no matter it is a positive or negative display, the background color is affected by the color of LED backlight on some level. That is why the color of LED backlight is usually white.

Blanview is OrtusTech’s unique TFT-LCD technology enabling the display to create high contrast and crisp images even in bright circumstances where sunlight hits the display surface directly. Built with high-quality amorphous silicon (a-Si) technology know as HAST (Hyper Amorphous Silicon TFT), which developed through a culmination of 40 years of display expertise. Ortustech has succeeded in generating new type TFT-LCD with a good balance between Sunlight Readability and Low Power Consumption.

Transmissiveis the most common LCD technology that is widely used in many electrical devices. Even though Transmissive can provide clear images in indoor and dark situations, its display readability gets worse in bright outdoor situations. Increasing backlight power can improve the display visibility somewhat, but it boosts total power consumption. This may be a critical impact to battery life in handheld devices.

While Transflectiveis suitable LCD technology for outdoor applications. Transflective has pixels divided into 2 areas, Transmission and Reflection area. The reflection area (reflective electrode) takes a role to reflect incident light from outside. This can give a clear display readability as well as low power consumption. However, the panel transmittance (backlight efficiency) becomes rather lower due to a 2-divided pixel structure. As a result, Transflective inherently has a drawback of large power consumption in indoor or dark conditions. Furthermore, complex pixel structure can cause problems when color levels change from indoors and outdoors. Generally, white color tends to gain yellowish tint outdoors.

This unique technology enables Ortustech to take a “hybrid use” of backlight and incident light from outside. Blanview succeeds in not only ensuring superior display readability in any situation, but also decreasing total power consumption.

Blanview TFT-LCDs are a great choice for electronic equipment, facilities and devices which may be used sometimes outdoors and sometimes indoors. The Low-Power-Consumption advantage will extend a battery life of handheld devices.

Blanview family offers a wide variety of standard off-the-shelf products in varying display sizes, resolutions, interfaces, characteristics and additional functions. Plus Macnica offers a variety of services to enhance our LCD displays, including OPTICAL BONDING, TOUCH SCREEN and COVER GLASS OPTIONS, and CUSTOMIZED WAREHOUSING AND LOGISTICS.

The Macnica ODAC Evaluation Kit is a complete kit for evaluation of Ortustech’s “Blanview Technology” TFT-LCDs. The goal of this kit is to provide an easy and portable environment for demo and evaluation of the LCD lineups offered by Ortustech.

Golden View Display wants you to make an informed choice among our LCD products. The tech center provides you with most of the information you will need to understand liquid crystal displays.

The transflective display consumes low power but still can show the pictures in clear and comfortable way in the strong light, is an alternative solution of sunlight-readable display.

1. We’re interesting in Embedded Display: ENHANCEMENT OF NEW TFT LCDS EQUIPPED WITH EMBEDDED DISPLAY PORT INTERFACE 11.6” – 15.6” – 18.5” – 30”. We would like to order 1 unit for testing and checking if it’s suitable for our needs. Please submit your best price & delivery time. Appreciate to have your soonest reply.

2. Hello, Hope this message finds you well. We are looking for a display that meets the following requirements: Diagonal Size 10.1” (256.5mm), Resolution – Higher than 1280x800, Max thickness 8mm. Annual quantity needed is 10,000/year, Ideal voltage is 24V, Production parts guaranteed to be available for 10 years, Connector interface: eDP. Would you recoment this display? -- TFT Color Display 10.1inch 1920X1200 resolution in Medical system. What is the pricing / lead time for an order of Quantity 100 & 10,000? Thank you for your help

4. Dear Sir/madam, We are interested in two displays that you have listed on your website. Could we please arrange to order one of each for our engineering team to test with them. Regards

5. Hello, My coworker had worked in past with you with regards to the 3.46" 800*340 resolution display. We really liked the samples and I am looking to know more about that display. I also wanted to know if you have a 3.46" 400*170 resolution display as the 800*340 is a bit of overkill for our application. Thank you

11. Hi, I am interested in the above product, but need transflective display. It must be able to be read in sunlight with the backlight off. We are seeking quantity about 5,000 per year. Can you provide this? Thank you