dewalt d26960k heat gun kit with lcd display pricelist

This is a decent heat gun, but it"s not as nice as some I"ve used, although it"s cheaper than all the others I"m compare it to. I use it at home, mostly for heat shrink tubing, and window film in the winter. It does the job, but it could be better.It doesn"t get as hot as I expect based on the temperature on the screen. It seems to be about 100-150 degrees cooler than the heat guns I have at work, which are made by Bosch and Steinel. Well, the Bosch one is actually made by Steinel too, but it says Bosch on it. They don"t make that one anymore though. But I need a higher setting on this Dewalt gun to do the same things at the same rate that I do with my Bosch and Steinel guns at work, so the temperature indicator is definitely calibrated differently, and it feels a lot cooler.It doesn"t have presets. Which wouldn"t be a big deal, but it doesn"t always go back to the temperature I had it at after I turn it off. It sometimes does, but it usually doesn"t, and I haven"t figured out why. I guess I just haven"t paid enough attention. But it usually defaults to 150 degrees when I turn it on, and if I hit up or down it goes to 50 degrees above or below where I had it depending on which button I hit. So it doesn"t take long to get back to the temperature I had it at, but it"s kind of a pain. Also, it"s only adjustable in 50 degree increments, which really isn"t that big a deal, but the other guns I use are adjustable in 10 degree increments. I suppose if you were doing some sort of precision work you might need that fine level of adjustment, but I generally don"t.As for positive things, it has a nice long power cord on it, which is good. The kickstand thing works pretty well, and having all the accessories is a plus. The accessories aren"t quite as nice as some, but they"re not bad, and you can always add more. The case has a place for every accessory, which is nice, since it keeps them from floating around in the case. The variable temperature and digital display are nice too, even if the temperature isn"t 100% accurate. It"s at least consistent.All in all, it"s a good gun for the money, and I"d recommend it to people who need a reasonably priced heat gun for general purpose stuff around the house or work. It"s probably better than anything else in this price range. However, if you want a really nice heat gun and have money to burn, I highly recommend the Steinel digital gun like I have at work. But I don"t have $300 laying around at home, so I"m happy enough with this Dewalt gun for personal use.

Having a reliable variable temperature Heat Gun with LCD Display is vital for professional contractors and homeowners. With the release of a whole bunch of new LCD display heat guns for 2019, we thought its time to check out a few top sellers that are affordable, accurate and reliable.

After reviewing a whole heap of mid-range heat guns, it’s now time to check out the best money can buy. They may be slightly expensive but they will last a lifetime with perfect setpoint temperature.

Heat guns are power tools that emit a stream of superheated air at variable temperatures. These extreme temperatures can go as high as 1,300 degrees F (700 C). Many heat guns have an electrical heating element wrapped in ceramic to insulate them and trap the heat. But some heat guns can use gas like butane, these are called cordless heat guns or torch blowers

To control the output temperatures and are flow many heat guns will have adjustable fan motors and variable heating elements. These 2 adjustments will set air velocity and different temperatures. Heat guns with high airflow output (greater than approximately 20 cubic feet per minute) are sometimes called heat blowers.

Heat guns can be used for a huge variety of applications, these range from copper and plastic welding, paint drying, paint stripping, carbon fiber wrapping, activating adhesives, softening compounds, window tinting, sticker removal, to touching up shrink-wrap.

For heat guns to be an effective paint stripper, it must produce extremely high temperatures. The side effect of this is the heated stripper is capable of igniting paper, wood, paint, and varnish residue and similar materials. You should practice on a small area to become more familiar with the tool and develop the proper technique. The very real danger of accidental ignition will be greatly reduced.

To work out the proper temperature and technique, the best thing to do is Practice, Practice, Practice. Work on simple stripping or heating projects, preferably outdoors. (let’s not burn the house down) until you get a feel for the work.

Accessory nozzles are usually provided in the kit, are used to shape the hot air stream over a wider area, direct focused area, or direct it around pipes and tubing for even heating. Protecting the surrounding areas such as panes of glass is vital to make sure you don’t burn or crack them from overheating. These different attachments help in solving some of these little life tasks. Some heat gun models also provide a stand to allow hands-free operation.

The DEWALT D26960K Heavy Duty Heat Gun with LCD Display is what we consider the best heat gun here. Its large LCD display will allow users to adjust the temperature within 50-Degree increments in a range of 150 to 1100-Degree F.

This makes it great to work on temperature-sensitive applications like Vehicle Wraps and soldering. It has built-in overload protection that will instantly shut down the heat gun if it detects overheating. A clever built-in hang ring adds a convenient storage feature, to save on space and innovative kickstand support provides greater stability and makes hands free usage a breeze. The very comfortable hand grip and lightweight design will let you use this heat gun for hours at a time.

The case includes 12 common accessories like scrapers and different nozzle sizes to accommodate the many different types of heating usage you may encounter either at work or at home. Eg Soldering, Enamel or Acrylic paint stripping, welding, defrosting pipes and fridges, heat shrinking, vinyl wrapping, wallpaper stripping and so much more.

If you want the best with the most features and value for money, you should get the DeWalt D26960K Variable Temperature Heat Gun with LCD Display. DeWalt makes some fantastic reliable tools that I love to recommend as I use many myself. I have yet to have a single failure.

I love this heat gun, one of the main reasons I purchased this one for my self-was because of the many positive reviews along with the 5-star ratings. As an electrician it super important to have the correct air temperature when working with heat shrink and bending conduit.

This 1700W LCD heat gun has some special features that have enabled it to make its way into our top 4 heat gun review. What is most impressive is the quick startup to full heat in only a few seconds. This is due to the special 2 core cable wound elements inside the heat gun.

The selection buttons on the back are easy to use with temperature increase and decrease that are nice and large. You can also control the fan speed easily. If you have preset tasks you can also set these values into memory for easy retrieval at a later time.

It is equipped with four extra heat gun nozzles and three scraper blades to enable this heat gun to be used in a variety of applications. Such as paint scraping, pipe welding, drying, sticker removal, heat shrinking, and much more.

It comes with a 1.8m power cord high is nice and long. Most people will still need an extension lead. With a 24 month warranty, you will know that this tool is well supported.

Now if you want an industrial heat gun for your workshop that is going to get used all day every day then the Steinel brand of Heat Guns with LCD display is for you. These heat guns can do it all. From plastic welding, PVC bending, paint stripping, car wraps, copper soldering, and so much more. There is a heat gun kit specially designed for your specific job.

Set includes Heat Gun, Welding Iron, Reducer Nozzles, 2 pieces of wire mesh, 16 pieces of ThermoFlex™ Rod, Temperature Guard, Guide Book, and Heavy Duty Case

The Steinel auto body welding kit is one of the most powerful LCD heat guns on the market.  The HG 2310 LCD heat gun, which can pump out a whopping 3.6 to 17.6 cubic feet per minute (CFM) of airflow at temperatures ranging from 120 to an extreme 1200 degrees F. This range can make great use of the auto body welding accessories for use in many different applications.

The kit also includes two special reducer nozzles designed for heating small areas. This is for heat concentration like plastic and metal solder welding. A nice heavy-duty carrying case finishes off the package nicely and will provide great protection for your heat gun.

The Steinel brand is a leading manufacturer of heat guns, glue guns, gas torches, and infrared sensors. The company was founded in Germany in 1959 by Heinrich Wolfgang Steinel and is still going strong today thanks to it’s focus on industrial LCD heat guns.

STEINEL is now a worldwide organization dedicated to the development of technology for the delivery of extreme controlled heat. Professionals and home users around the planet have come to expect the best, superior performance, and reliability that only Steinel can provide

For those on a budget the Steinel Anniversary Edition, Heat Gun Kit has been released to celebrate their 25th anniversary. Steinel has wowed everyone by cutting prices by up to 50% on a state-of-the-art HL 2010 E IntelliTemp heat gun and added all the essential accessories you need to do a huge range of jobs.

This LCD heat gun is stored in a rugged quality aluminum carrying case. The Steinel HL 2010 Heat gun has an easy to read LCD screen and features microprocessor control. The large rear LCD display will let you move temperature set-points up or down in 10°F increments to lock in the exact heat you need for any task at hand.

You get an Industrial Heat gun at a cheap price. The exclusive DuraTherm heating element is entirely enclosed in a molded ceramic. This is to provide exact heat to the job, extend the element life, and insulate the heat gun outer shell from this very powerful element. With a huge range of attachment nozzles and accessories included, you will be ready for any job.

The clear LCD display allows you to choose from 5 different fan speed settings and temperatures from ranging from 120 Degrees to 1200 Degrees F This is done in 20 Degree steps. This is the perfect low-temperature heat gun.

The RH650V variable temperature LCD heat gun is the perfect tool for stripping paint, softening or removing adhesives, removing flooring, bending conduit, thawing frozen freezers or pipes, loosening rusted nuts and bolts, molding plastic and PVC, drying paint or plaster, electrical heat shrinking, and much more.

TheHitachi RH650v has 5-speed settings ranging from 8.8 CFM to 17.7 CFM, and a temperature range of 120 Degree – 1200 Degree F, this LCD heat gun has the energy and control needed to tackle a huge range of projects.

The LCD display ensures the accuracy of your desired temperature set-point with a visual feedback, while the constant heat control maintains consistent performance and will prevent overheating.

Electronic heat sensing will allow you to exactly dial in a set temperature, and then select 1 of 5 fan speeds. The inbuilt heat sensing device will precisely regulate the air temperature regardless of the fan setting. Giving you to the right temperature for any given fan speed.

It comes with a few different attachments that fit well, they are not sloppy or hard to put on take off. With many positive 5 star reviews, this will be a great addition to your toolbox.

The New Simplistex LCD Digital Heat Gun didn’t quite make our top 4 list due to it being on backorder at the time of writing. It often sells out fast due to the cheap price and great online reviews.

The large LCD digital temperature control allows you to perfectly adjust the output temperature fast for any task. You can adjust the temperature from 122°F to 932°F.

You are in perfect control of both temperature ( 122°F – 932°F) and the fan speed. Having 6 fan speed settings which you can adjust by using the digital controls on the back of the heat gun. The LCD Screen will display the current temperature setting, units of measurement, fan speed, as well as the current output temperature. You are able to see the temperature between °F & °C

I actually liked this LCD heat gun a lot, it was cheap and felt good in my hand. It doesn’t have the huge range of accessories or the high heat output that the Dewalt LCD heat gun has, but if you are just after value for money they make sure to check out the Simplistex LCD heat gun.

With plenty of 5-star reviews online, its great to find a product that may not be a huge brand name, but will keep up with the competition at a cheaper price.