error code 0326 lcd panel supplier

An error occurred during the tests that may involve the main system board of the computer. When diagnostics fail again after the BIOS is at the most current version, browse to our ePSA online tool.

When the diagnostics still results in an error code, browse to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the main system board of the computer. When diagnostics fail again after the BIOS is at the most current version, browse to our ePSA online tool.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the main system board of the computer. When diagnostics fail again after the BIOS is at the most current version, go to our ePSA online tool.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the main system board of the computer. When diagnostics fail again after the BIOS is at the most current version, go to our ePSA online tool.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the main system board of the computer. When diagnostics fail again after the BIOS is at the most current version, go to our ePSA online tool.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the main system board of the computer. When diagnostics fail again after the BIOS is at the most current version, go to our ePSA online tool.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the main system board of the computer. When diagnostics fail again after the BIOS is at the most current version, go to our ePSA online tool.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the main system board of the computer. When diagnostics fail again after the BIOS is at the most current version, go to our ePSA online tool.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

After performing the steps, and the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the main system board or memory of the computer. When diagnostics fail again after the BIOS is at the most current version, go to our ePSA online tool.

After performing the steps, and the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the main system board or memory of the computer. When diagnostics fail again after the BIOS is at the most current version, go to our ePSA online tool.

After performing the steps, and the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the main system board or memory of the computer. When diagnostics fail again after the BIOS is at the most current version, go to our ePSA online tool.

After performing the steps, and the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the main system board or battery of the computer. When diagnostics fail again after the BIOS is at the most current version, go to our ePSA online tool.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the main system board or battery of the computer. When diagnostics fail again after the BIOS is at the most current version, go to our ePSA online tool.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the main system board or battery of the computer. When diagnostics fail again after the BIOS is at the most current version, go to our ePSA online tool.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the main system board or battery of the computer. When diagnostics fail again after the BIOS is at the most current version, go to our ePSA online tool.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the main system board or battery of the computer. When diagnostics fail again after the BIOS is at the most current version, go to our ePSA online tool.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the main system board or battery of the computer. When diagnostics fail again after the BIOS is at the most current version, go to our ePSA online tool.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the main system board or battery of the computer. When diagnostics fail again after the BIOS is at the most current version, go to our ePSA online tool.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

Desktops, servers: Check the installation of the removable drive, cables, and connections. All computers: If the error persists, ensure that drive firmware and BIOS are current.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the main system board of the computer. When diagnostics fail again after the BIOS is at the most current version, go to our ePSA online tool.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests involving the CMOS battery (This maintains all the settings in the BIOS when there is no power to the computer) On desktop computers this is an easily replaceable watch size battery, some laptops may have a replaceable battery too.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the main system board of the computer. When a memory error is detected, try memory modules individually. When no 2000-0123 memory error occurs, and when diagnostics fail again after the BIOS is at the most current version, go to our ePSA online tool.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the main system board of the computer. When a memory error is detected, try memory modules individually. When no 2000-0123 memory error occurs, and when diagnostics fail again after the BIOS is at the most current version, go to our ePSA online tool.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the main system board of the computer. When a memory error is detected, try memory modules individually. When no 2000-0123 memory error occurs, and when diagnostics fail again after the BIOS is at the most current version, go to our ePSA online tool.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the main system board of the computer. When a memory error is detected, try memory modules individually. When no 2000-0123 memory error occurs, and when diagnostics fail again after the BIOS is at the most current version, go to our ePSA online tool.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the main system board of the computer. When a memory error is detected, try memory modules individually. When no 2000-0123 memory error occurs, and when diagnostics fail again after the BIOS is at the most current version, go to our ePSA online tool.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the main system board of the computer. When a memory error is detected, try memory modules individually. When no 2000-0123 memory error occurs, and when diagnostics fail again after the BIOS is at the most current version, go to our ePSA online tool.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that involve the Real Time Clock (RTC) of the main system board in the computer. When a memory error is detected, try memory modules individually. When no 2000-0123 memory error occurs, and when diagnostics fail again after the BIOS is at the most current version, go to our ePSA online tool.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the main system board of the computer. When a memory error is detected, try memory modules individually. When no 2000-0123 memory error occurs, and when diagnostics fail again after the BIOS is at the most current version, go to our ePSA online tool.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the main system board of the computer. When a memory error is detected, try memory modules individually. When no 2000-0123 memory error occurs, and when diagnostics fail again after the BIOS is at the most current version, go to our ePSA online tool.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the main system board of the computer. When a memory error is detected, try memory modules individually. When no 2000-0123 memory error occurs, and when diagnostics fail again after the BIOS is at the most current version, go to our ePSA online tool.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the main system board of the computer. When a memory error is detected, try memory modules individually. When no 2000-0123 memory error occurs, and when diagnostics fail again after the BIOS is at the most current version, go to our ePSA online tool.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the USB controller or ports of the main system board of the computer. Disconnect any USB devices and run the diagnostic again. Test USB devices in a different port. Try a known-good USB device.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the USB controller or ports of the main system board of the computer. Disconnect any USB devices and run the diagnostic again. Test USB devices in a different port. Try a known-good USB device.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

An error occurred during the tests that may involve the USB controller or ports of the main system board of the computer. Disconnect any USB devices and run the diagnostic again. Test USB devices in a different port. Try a known-good USB device.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

LCD Extended Display Identification Data (EDID) - unable to access the EDID Electrically Erasable Programmable Read-Only Memory (EEPROM) in the LCD display is indicating a data failure. If there is a video on the LCD, then the Display does not need replacement.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

LCD panel - unable to modify brightness. Try to adjust the brightness in Windows using the hotkeys. Boot to the BIOS and see if brightness can be adjusted at that point outside of Windows.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

You may get this error if you answered No to the LCD BIST test instead of Yes. If you could clearly see a red, blue, green. and white screen with text without distortion, lines or color problems, rerun the diagnostic and if the screens appear normal, click Yes.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

You may get this error if you gave no answer to the LCD BIST test. If you could clearly see a red, blue, green. and white screen with text without distortion, lines or color problems, rerun the diagnostic and if the screens appear normal, click Yes.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

You may get this error if you answered No to the color test instead of Yes. If you could clearly see both the vertical and horizontal color bars without distortion, lines, or color problems, rerun the diagnostic and if the bar appears normal, click Yes.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

Normally, the cable that is involved in the error (LCD LVDS CABLE for example) is indicated in the error message. Reseat the cable connection and inspect the cable and connections for damage.

Turn off your computer and reconnect the cable, jumper, connection, or server indicated in the error message. (see your service manual for instructions.)

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

Normally, the cable that is involved in the error (LCD LVDS CABLE for example) is indicated in the error message. Reseat the cable connection and inspect the cable and connections for damage.

Turn off your computer and reconnect the cable, jumper, connection, or server indicated in the error message. (see your service manual for instructions.)

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

Normally, the cable that is involved in the error (LCD LVDS CABLE for example) is indicated in the error message. Reseat the cable connection and inspect the cable and connections for damage.

Turn off your computer and reconnect the cable, jumper, connection, or server indicated in the error message. (see your service manual for instructions.)

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

Turn off your computer and reconnect the cable, jumper, connection, or server indicated in the error message. (see your service manual for instructions.)

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

Normally, the cable that is involved in the error (LCD LVDS CABLE for example) is indicated in the error message. Reseat the cable connection and inspect the cable and connections for damage.

Turn off your computer and reconnect the cable, jumper, connection, or server indicated in the error message. (see your service manual for instructions.)

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

Normally, the cable that is involved in the error (LCD LVDS CABLE for example) is indicated in the error message. Reseat the cable connection and inspect the cable and connections for damage.

Turn off your computer and reconnect the cable, jumper, connection, or server indicated in the error message. (see your service manual for instructions.)

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

The Network (Ethernet) device may be faulty. This may be on the motherboard, or an adapter, or a daughter card, depending on the computer. Errors include "Register test failed" or "Packet loopback test failed," or perhaps others, too.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

When the diagnostics still results in an error code, go to our ePSA online tool. You can get more information about possible resolutions to your issue and even get a part dispatched if needed.

With a special focus on residential and commercial cooling units that are installed all around the world. Offering you a chance to control the environment you create. The company offers powerful, and lightweight climate control units that can easily offer efficient cooling throughout the day and night. Set with small enclosures and command panels each cooling and heating appliance showcase exceptional work. Even though the company pays close attention to detail, there are times when you may experience some errors and issues with their cooling units.

To help you out we have listed down some of the most common error codes for Rittal ACs. All you have to do is note down the error code, and match it using the list below. Once you have the error code you can easily work your way to the fix. Keep in mind that every error code is different, and can help identify the issue your appliance is facing. Once the issue has been resolved it will automatically work ideally.

This error indicates that invalid credentials, the API Login ID or Transaction Key, are being submitted. If you have confirmed that your API login ID and Transaction Key are accurate, you may need to confirm that you are submitting to the correct URL. If you are using a test account, please make sure to post to the sandbox URL. If you’re using a live account, make sure to post to the production URL.

If all of these fields are duplicated in an existing subscription, error code E00012 will result. Modifying any of these fields should result in a unique subscription.

This error may occur for merchants on the HSBC or FDI Australia processors when setting validationMode to liveMode as these processors do not support authorization reversals. We recommend HSBC and FDI Australia merchants set validationMode to testMode instead.

The error message “Duplicate Transaction” indicates that a transaction request with the same information has been submitted within two minutes of a previous attempt. Authorize.Net looks for transactions which are likely to be duplicates by matching the data provided with the transaction.

This error indicates you are either posting the incorrect API Login ID within your script, connecting to a server that does not recognize your account, or using an account which is inactive. Please follow these steps to ensure that your software is connecting correctly:

If you are posting your transaction requests to the gateway URLs https://test.authorize.net/gateway/transact.dll and you are using an account given to you by an Authorize.Net Reseller or from Authorize.Net Sales, you may encounter this error. The gateway URLs mentioned above only work with specific test accounts, available upon request by completing the form at https://developer.authorize.net/hello_world/sandbox/

Error 14 occurs for SIM users when one or more URLs are specified in your Default Response/Receipt URL settings, but we receive a URL with your transaction that does not match any listed here. In this case the transaction would include the field x_receipt_link_url if you prefer to view our receipt page but provide a link for the customer to use to return to your site. Alternately, the transaction would include the field x_relay_url to specify which web page on your server should be used as the receipt page your customers see.

By designating a Default Response/Receipt URL, you are telling our system to only return results to one of the listed URLs. If the value of either x_receipt_link_url or x_relay_url does not match one of these designated Default Response/Receipt URLs, Error 14 will occur.

This error may be caused by a refund request if the referenced transaction ID (refTransId) was originally processed through a different Authorize.Net account than the one being used for the refund request. Please submit refund transactions using the gateway account that generated the original transaction.

The error could also indicate a setup problem with a particular card type. Please contact your Merchant Service Provider (MSP) to check on your payment processing setup and to confirm that there are no issues with the configuration for the card type being submitted in the transaction.

This error message is displayed when there is a connection issue between Authorize.Net and the credit card processor. It results from Authorize.Net not receiving data in response to the transaction request we sent to the credit card processor. This type of issue is usually fixed quickly and we continue to work towards eliminating these types of connectivity issues. In some cases it may also be due to Internet congestion, and not related to either of our systems.

When a decline message appears for this card in Virtual Terminal, rather than the “Try again in 5 minutes” error message, this means the connectivity problem has been resolved and transactions can be processed again normally.

This error message is displayed when there is a connection issue between Authorize.Net and the credit card processor. It results from Authorize.Net not receiving data in response to the transaction request we sent to the credit card processor. This type of issue is usually fixed quickly and we continue to work towards eliminating these types of connectivity issues. In some cases it may also be due to Internet congestion, and not related to either of our systems.

When a decline message appears for this card in Virtual Terminal, rather than the “Try again in 5 minutes” error message, this means the connectivity problem has been resolved and transactions can be processed again normally.

1. This error may occur if you use the field currencyCode in your scripting, and you are setting it to a currency code other than what your account is set up for. Only one currency can be set for one account. At this time, Authorize.Net only supports the following currencies: AUD, CAD, CHF, DKK, EUR, GBP, NOK, NZD, PLN, SEK, USD, ZAR.

2. This error may occur when an Authorize.Net account is created without a valid Currency ID. In this situation, processing transactions is not possible through the API or through the Virtual Terminal, regardless of the currency you choose.

Only merchants set up for the FraudScreen.Net service would receive this decline. This code will be returned if a given transaction’s fraud score is higher than the threshold set by the merchant.

Regardless of the Card Code Verification filter settings configured for the payment gateway account in the Merchant Interface, the processor may decline transactions submitted with a card code value that does not match the card code on file for the cardholder at the issuing bank. To avoid unnecessary errors when processing live transactions, only valid card code values should be submitted in the card code field (cardCode). If the merchant does not wish to submit card code information, the card code field should not be submitted.

This error would be returned if the transaction received a code from the processor that matched the rejection criteria set by the merchant for both the AVS and Card Code filters.

When Authorize.Net is responding back to a script on your server, our system waits up to 10 seconds for a response. If we do not get a response in 10 seconds, our server will time out and display an error page. The first thing that you will need to look for is the order that your script executes. It is very important that something is printed to the screen before any other process is started. If your script prints to the screen first, we will recognize that you are receiving the information. The most effective method would be to print the headers, and a line of text such as “Processing, please wait.”

Please check to see if there are different processes that are used in your script for approvals, declines, or errors. Check each process to be sure that they will write to the screen before any other functions.

This error is caused when a transaction is submitted with data that the credit card processor does not recognize or is unable to interpret. In most cases our system will prevent this from happening with front-end safeguards, but since every processor is unique in the way they handle data, some transactions could get through to the processor with invalid or missing data. Examples of these types of discrepancies include placing the incorrect number of characters in the Card Verification Value (Card Code), or sending non-alphanumeric characters in the Zip Code.

If you receive an Error 63 repeatedly, please check that the Merchant Business country is set correctly. This is especially pertinent on accounts which use TSYS (formerly Vital or Visanet) as the payment processor, as we have to transmit a number of the Business Information fields on each Transaction attempt. TSYS/Vital/Visanet transactions will fail if all the information is not set correctly.

This error is applicable to Wells Fargo SecureSource merchants only. Credits or refunds cannot be issued against transactions that were not authorized.

The transaction was declined because the merchant configured their account through the Merchant Interface to reject transactions with certain values for a Card Code mismatch.

This error code is applicable to merchants using the Wells Fargo SecureSource product only. This product does not allow transactions of type CAPTURE_ONLY.

This error can occur for several possible reasons, depending on which method your software uses to connect to your Authorize.Net account. Usually it is due to mixing methods in unsupported ways.

1. When using AIM to integrate with Authorize.Net, the HTTP POST request must be made from a script located in a secure location on your server, and not through an HTML page. Submitting an AIM request from an unsecured HTML page may cause this error.

4. Also confirm that you are sending the field, x_relay_response, set to FALSE. Otherwise, we will attempt to use any default Relay Response or receipt links listed in your Response/Receipt URL settings in the Merchant Interface, which causes this error.

1. You will receive this error if there are variables being sent that are not applicable to SIM. Two of the variables that are most commonly incorrect include:

2. You will receive this error if the proper fingerprint hash variables are not being sent with the transaction request. The variables that need to be included (with appropriate values):

Applicable only to the SIM API. Fingerprints are only valid for a short period of time. This code indicates that the transaction fingerprint has expired.

If a customer fills in incorrect information and the transaction is declined, they cannot click Back and re-enter the information as this will attempt to use the same fingerprint hash in resubmitting the transaction request, which will result in error 98.

NOTE: This response is valid only for an integration method that has been sunset and is no longer available. If you encounter this error, please contact Merchant Support for assistance.

If you are receiving this error, it indicates that either x_password or x_tran_key is being submitted with your WebLink request. This represents a security risk as the password or transaction key could be viewed in your source code.

This error is generated when your account is in "Password-Required Mode" and you are not sending a valid password, transaction key or hash fingerprint with your transaction request, which is a recommended security measure.

If you are using a third party shopping cart which uses AIM and are receiving this error, please check with your shopping cart provider to ask if your application can pass the transaction key to the Authorize.Net payment gateway.

If you are using an older Authorize.Net account and you submit a password instead of a transaction key with your transactions, you may experience this error. Please ensure that you are posting a transaction key instead.

Some shopping carts, for backwards compatibility with older connection methods, may provide the means to submit both a transaction key and a password. You should not use both the transaction key and the password simultaneously; doing so may also result in this error. We recommend using the transaction key instead of the password whenever possible, as transaction keys tend to be more secure than passwords. In such a situation, please leave the password field blankIf the shopping cart has a field for the password but no field for the transaction key, please put the transaction key in the password field. Our system will recognize and validate the transaction key properly.

This code is applicable only to merchants that include the authenticationIndicator in the transaction request. The ECI value for a Visa transaction; or the UCAF indicator for a Mastercard transaction submitted in the authenticationIndicator field is invalid.

Also, this error can be received in the event that a special character is included in the cardholder authentication value. To resolve this issue, the special character must be URL encoded.

This code is applicable only to merchants that include the cardholderAuthenticationValue in the transaction request. The CAVV for a Visa transaction or the AVV/UCAF for a Mastercard transaction is invalid or contains an invalid character.

This code is applicable only to merchants that include the authenticationIndicator and cardholderAuthenticationValue in the transaction request. The combination of authenticationIndicator and cardholderAuthenticationValue is invalid.

This code is applicable only to merchants that include the authenticationIndicator and recurringBilling in the transaction request. Transactions submitted with a value in authenticationIndicator while recurringBilling is set to true will be rejected.

This error indicates that a user"s personal Login ID is being used to connect a website or billing software to the payment gateway. Personal login IDs may not be used to connect websites to Authorize.Net, for security reasons. For example, if an Account Owner, Account Administrator, Transaction Manager, or Account Analyst login ID is used for website or software implementation, this error will occur.

When merchants on the FDC Omaha platform encounter a decline due to AVS or CVV mismatch, we will attempt to void the transaction. If FDC Omaha does not reply to the void request, the merchant will see this error. As we did not receive a reply to the void request, there is a possibility that the original authorization will remain on the card for up to 30 days. If necessary, merchants may contact the card issuing bank, provide their merchant account number and the authorization code for the AVS/CVV declined transaction, and request a manual reversal of the authorization.

Transactions submitted from test credit card numbers (both ours and others") by merchants on the TSYS payment processing platform, will return a response of: "(180) An error occurred during processing. Please try again. Invalid processor response format," rather than "(2) Declined. This transaction has been declined."

Note that the TSYS payment processing platform was formerly known as Vital or Visanet. On TSYS/Vital/Visanet, Error 180 is an valid response indicating that a transaction was submitted and correctly received, but rejected due to using a test card number. If the processor is incorrectly configured, the response will be something more generic like a response of 30, 34, or 35.

This error also occurs if you submit a check number for your WEB, TEL, CCD, or PPD eCheck.Net transaction. Check numbers are only valid for ARC and BOC eCheck.Net transactions. See the eCheck.Net User Guide for details on eCheck.Net transaction types and requirements.

The SIM hosted payment form features a Security Code option (sometimes called CAPTCHA) used to confirm that the payment is being entered by a human being. This feature helps protect your site from automated scripts that may try to test credit card numbers through the payment form.

The Security Code works by generating an image that contains random numbers and letters that cannot be read by scripts. The customer is then prompted to enter the letters and numbers exactly as they appear in the image. If the customer enters the correct Security Code, the transaction is accepted as valid.

Error 312 indicates that the customer had entered the wrong Security Code. Should this error occur, a new Security Code is generated, and the customer is prompted to try again until they are successful.

Note: When using Simple Checkout, the customer is always required to verify a Security Code. Even if the Security Code is disabled from the payment form, the customer is required to verify a Security Code on the Simple Checkout order page.

The SIM hosted payment form features a Security Code option (sometimes called CAPTCHA) used to confirm that the payment is being entered by a human being. This feature helps protect your site from automated scripts that may try to test credit card numbers through the payment form.

The Security Code works by generating an image that contains random numbers and letters that cannot be read by scripts. The customer is then prompted to enter the letters and numbers exactly as they appear in the image. If the customer enters the correct Security Code, the transaction is accepted as valid.

Note: When using Simple Checkout, the customer is always required to verify a Security Code. Even if the Security Code is disabled from the payment form, the customer is required to verify a Security Code on the Simple Checkout order page.

NOTE: State and Postal Code are optional if the billing address is not in the U.S. or Canada. If the address is in the U.S. or Canada, the two-digit State/Province code must be provided, along with the Zip/Postal Code."

Verify that the RPC service is online and that Disk Management can connect to VDS. Restart the Virtual Disk service and the obengine service, and then try the backup operation again. For more details and solutions, search for the 0x800706BA code.

Restart the Virtual Disk service and retry the backup operation. Upgrade to latest operating system. For more details and solutions, search for the 0x80004005 code.

Run System File Checker to repair system file errors, reboot as required, and try the operation again. For more information, see Use the System File Checker tool to repair missing or corrupted system.

Run System File Checker to repair system file errors, reboot as required, and try the operation again. For more information, see Use the System File Checker tool to repair missing or corrupted system.

Run System File Checker to repair system file errors, reboot as required and try the operation again. For more information, see Use the System File Checker tool to repair missing or corrupted system.

Run a consistency check and retry the online backup.For more information, see Online recovery point creation of a datasource might fail with error ID 33505 or 100195.

Backup failed because Azure Backup could not initialize the metadata vhd at the configured cache location. This could be due to errors in the disk containing the cache location.

Backup failed because Azure Backup could not prepare the metadata vhd at the configured cache location. This could be due to errors in the disk containing the cache location.

Windows Server failed to take system state backup because specified backup disk could not be found. This can happen if there are critical volumes (EFI or Recovery volume) from old Windows installation present on non-OS disk. Windows Server Backup error message:

Windows Server failed to take system state backup EFI system partition is locked or other application is using files on the system partition. This can be due to some third-party security software. Windows Server Backup error message:

Operation failed as Windows Server Backup could not communicate with VSS writers due to errors in VSS. Windows Server Backup error message:

Operation failed as the shadow copy set contains only a subset of the volumes needed to correctly back up the System State. Windows Server Backup error message:

Current backup operations have been paused because the backup service has recovered from a serious error. As a result of this recovery, backup settings might have been modified.

Verify that the environment setting mentioned in the error message is present in the environment file. You can use the GetADStorage environment management cmdlet to examine the environment file.

Verify that the resource with the friendly name mentioned in the error message is present in the environment file. You can use the GetADStorage environment management cmdlet to examine the environment file.

Solar inverter error codes notify you of a situation threatening the normal operation of your solar power system. Many different things can go wrong and disrupt electricity generation from a solar PV system. The inverter will detect it and generate corresponding error codes to notify you.

You should be interested in inverter codes because their performance and lifespan are intricately linked to inverter error codes and taking appropriate actions.

An inverter error is anything registered issue that causes an interruption to the normal functioning of the solar inverter? It is an issue from within or outside the solar power system that will negatively affect its performance. It is important that you understand when an error has occurred, what the error code means, and how to resolve it.

The term “inverter error” does not mean that the inverter is broken. Yes, the issue could be the inverter, but it can also come from the other solar power system components or factors outside the system.

What better term for an error code flashing on your inverter display than “inverter error code”? These codes can be all numbers or a combination of numbers and letters.

Thus, inverter error codes are numeric or alphanumeric characters generated and displayed by inverters to notify the owner that something is wrong with the solar power system.

But the inverter will not leave you guessing. It will detect the particular reason, then generate and display the code for the particular reason. After seeing the error code, you or your installer will know the problem and solution.

For example, if using a Sungrow inverter, the 070 error code tells you that the inverter is heating up because of a defective fan. But the 037 error code tells you that the inverter is heating up because it is in a poorly ventilated spot, exposed to direct sunlight, or its air inlets are blocked.

Inverter failure can be caused by problems with the inverter itself (like worn out capacitors), problems with some other parts of the solar PV system (like the panels), and even by problems with elements outside the system (like grid voltage disturbances).

The list of installation errors is endless. For example, connecting the inverter backwards can blow the inverter and set the house on fire. Using wrong cables can cause unnecessary inverter shutdown when high demand loads are trying to operate. Using the wrong cable types are also a potential fire hazard.

Regular maintenance will prevent some of the situations that cause inverter failure and improve the lifespan of your inverter. But generally, solar inverters don’t outlast solar panels.

While solar panels have a 25 – 30 years lifespan, solar inverters have about 10 – 15 years. This is because of the limited lifespan of the electrolytic capacitors of inverters.

Fronius Inverters mostly display error codes using numeric characters. However, a few are displayed in plain text. Fronius inverters group their error codes into five classes.

109General grid error.109 is the first error code displayed for grid errors. After reviewing all power sets, the grid error is specified in more detail or remains at 109.

If a 2xx code occurs, the inverter also automatically disconnects from the grid and checks to make sure that conditions have returned to the acceptable range before automatically reconnecting.

POWER LOW (306)The code appears in plain textIntermediate circuit voltage has dropped below the allowed threshold value for feed in.Check solar panels. This code typically appears in the morning or evening when sunlight is low.

308Intermediate circuit voltage is too highThe inverter returns to the start-up phase. The error is rectified automatically. If it persists, contact a Fronius technician.

These are codes beginning with the number 4. The 4xx errors are caused by faulty hardware or software. So they require the services of a trained Fronius service technician.

412You’ve set a “fixed voltage” setting instead of the MPP voltage setting, and the voltage is lower or exceeds allowed limits.If the error persists, contact a Fronius technician.

414Memory array for Fronius IG type in EEPROM is faultyIt’s a one-off memory error that is rectified automatically. If it doesn’t, there’s an internal fault, and you should contact a Fronius technician.

425Communication is not possible with the power stage setThe operating status LED lights up orange.The system will attempt a restart to fix the error automatically. If it persists, contact a technician.

431Software problem (power stage sets are all in boot mode)This is a critical error fixed by conducting an AC reset or/ and firmware update.Switch AC circuit breaker on and off. If code persists, update firmware using Fronius Solar.update/IG Plus or Bootloader.

439. (plain text) switching between “SLAVE/ DC LOW” and “SLAVE/ POWER LOW”SLAVE/ DC LOW – The MPP master power stage set is switched off because of an error in a slave power stage setSLAVE/ POWER LOW – the MPP master power stage set is switched off because of a faulty GFDI fuseFor the faulty GFDI fuse, you can try replacing it. However, this is a critical error that needs the attention of a Fronius technician.

443Energy transfer failure because intermediate circuit voltage is too low or asymmetricA temporary error that occurs when switching on a power stage set.It’ll fix itself automatically. If not, restart the system, and if it persists, contact a technician.

450The “guard” (power stage set main processor) cannot be foundThese are critical errors that make the red operating status LED flash up.Try restarting the system. If that doesn’t fix the error, contact a Fronius technician.

464Display error (the hardware or software version of the display or both is not compatible with IG brain)Restart the system. If that doesn’t clear the error, update firmware using Fronius Solar.update/IG Plus or Bootloader.

470At high DC voltage, the buck converter relay does not openCheck the system configuration. If the error continues appearing, engage skilled technicians.

These are codes beginning with the number 5. Generally, these errors do not affect feed-in operation. While the error code is displayed, the inverter will continue working normally.

Acknowledge the error code by pressing any key, and it will disappear. However, know that clearing the code does not solve the problem it notifies you about.

553Phase master is deactivated due to frequent errorsThe system will automatically reintegrate the power stage set into the Mix network.If the error persists, contact a Fronius technician.

We’ve also previously explored some Sungrow Inverter error codes. But here, we’ll look at a more comprehensive list of codes, including what they mean and troubleshooting tips.

003The grid transient voltage exceeds the inverter’s acceptable upper limitIt is a temporary error that the inverter will automatically rectify. If it persists, contact Sungrow.

005The grid voltage is too low, even lower than in code 004It is a short-term error due to grid conditions. The inverter will automatically rectify it as grid conditions improve. If it persists, contact Sungrow.

006The AC output current exceeds the inverter’s acceptable upper limitThe inverter resumes if the output current falls within the acceptable range. If the error persists, contact Sungrow.

010IslandingCheck whether the AC circuit breaker is triggered, whether AC cables are firmly connected, and whether the grid is out of service. If the 3 conditions are OK, but the code persists, contact Sungrow.

056The Slave DSP detects that leakage current is beyond the acceptable inverter upper limitCheck if there’s a grounded fault of the PV string. If the error persists, contact Sungrow.

084Sungrow meter’s cable connection is reversedCheck that power cables are connected correctly. If “Existing Inverter” is “ON” via LCD menu, ensure that its rated power is set correctly. For Sungrow single-phase meter, check that the CT clamp of the 1-phase sensor is placed correctly

088Arc fault on PV sideTurn the DC switch “OFF,” then check if there are no damaged cables, fuses, or loose terminals. Replace if necessary. Turn the DC switch “ON,” then clear the error via iSolarCloud or the LCD menu. If the error persists, contact Sungrow

101Grid frequency is too high, even higher than that in code 008Check the grid frequency. Contact your utility grid company if it’s not within the inverter’s acceptable range.

106Both the PE terminal on the AC connection and the second PE terminal on the enclosure are not connected well)Check whether there’s a reliable grounding line. If there’s access to the ground, and the error persists, contact Sungrow.

200The bus voltage is beyond the acceptable rangeThe error is rectified automatically when bus voltage drops. If the error continues, contact Sungrow.

ABB Inverters combine two systems when displaying errors. In addition to the operating status LED that flashes, they show an error code together with an error message. While the error message is in plain text, the error code is in alphanumeric characters.

No codeRed LEDGround FThere’s a DC leakage to groundGet a megohmmeter to measure the insulation resistance in the PV field compared to the ground (you must take the measurement under the same environmental conditions that the error occurred)If the value is lower than one megaohm, call a technician for a check. If it is higher than one megaohm, the error should clear automatically. If it doesn’t, contact ABB customer service.

No codeYellow LED lampNEW COMPONENT REFUSED!Usually occurs after one of the components in the inverter is replacedLink the components by going to “Settings > Service > Accept boards”.If the error persists, contact customer assistance.

No codeNo LEDSET COUNTRY or NO NATIONDuring installation, you didn’t set the inverter’s grid standardSet the country’s grid standard. If the error persists, contact customer service.

No codeYellow LEDVac absentThe inverter does not record output voltage (AC)Check that there’s grid voltage on the inverter’s AC terminal block. If absent, look out for protection work on the line and grid voltage on the supply point.

No codeYellow LEDMem. brokenThere’s a communication fault on the memory board where the inverter saves the value of the power produced daily.Remove the memory board the check the welding work on all the connector’s terminals. Then correctly reinsert the memory board. If the error is not fixed, contact customer service.

No codeGreen LED lampAwaiting sunThe voltage from the PV generator is lower than the activation voltage (Vstart).Check that the input voltage on the inverter does not exceed Vstart, then check if there’s sufficient irradiation. If it surpasses Vstart, contact customer service.

Both an alphanumeric error code and a plain text error message accompany the LED display in this group. However, the distinctive feature of the second group is that the error codes begin with the letter W. They are warnings.

W013Clock brokenThere is a difference of over 1 minute in the time displayed and the internal time of the microprocessors. This indicates that the clock circuit is faulty.If the error persists, contact customer service.

W017String Err.One or more string protection fuses are damaged, causing an error when measuring string current.Use a multimeter to check the state of the fuses. If any is open, replace them, and check that the input current of the string doesn’t surpass the rating of the fuses. If there are no damaged fuses, contact customer service.

W018SPD DC ErrDamaged overvoltage surge arresters are positioned on the DC sideCheck the inspection window on each surge arrester. If it’s red, the surge arrester is damaged, and you must replace the cartridge. Contact customer service if they are all green, but the error persists.

W019SPD AC ErrDamaged overvoltage surge arresters are positioned on the AC sideDamaged overvoltage surge arresters are positioned on the AC side check the inspection window on each surge arrester. If it’s red, the surge arrester is damaged, and you must replace the cartridge. Contact customer service if they are all green, but the error persists.

This group also features alphanumeric error codes and error messages. Unlike the second group, they are not mere warnings; they are errors. So, each error code begins with the letter E.

E005Comm.ErrorThere are communication issues between the control devices inside the inverter.Switch off the inverter and restart it. If the problem persists, contact customer service.

E014Over-TempVery high temperature inside the inverter. It’ll occur if the external temperature is over 60°CEnsure that the inverter isn’t exposed to direct sunlight. Contact customer service if the error persists after the ambient temperature has returned to an acceptable range.

E018Ground FaultA leakage current to the ground is detectedMeasure the insulation resistance. If the value is lower than 1 megaohm, call a technician for a check. The error will automatically be rectified if it’s higher than 1 megaohm. If it persists, call customer service.

E023DC in errorThe current continuously supplied to the grid exceeds the threshold of 0.5% of the normal operating current.A sporadic repetition of the error is a sign of grid distortion. So, it is automatically rectified when conditions normalise.

E025Riso LowThe insulation resistance is very lowMeasure the insulation resistance. If the value is lower than 1 megaohm, call a technician for a check. The error will automatically be rectified if it’s higher than 1 megaohm. If it persists, call customer service.

E036Vout Avg errorThe average of the measur