tft lcd monitor wiring diagram pricelist

General Specification The NMLCD-43M15 is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. It is composed of a...

General Specification NMLCD-43480272-RTP-IPS is a 4.3 inch IPS type TFT LCD with a Resistive Touch, with 480*272 resolution. This product accords with RoHS. Product Pictures 4.3 inch IPS Type TFT...

General Specification This product is a 4.3"" color active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor). It is composed of color TFT-LCD panel, driver IC,...

General Specification NMLCD-43800480-IPS-850 is a TFT LCD with all view angle with high brightness. It is composed of a colour TFT-LCD panel, driver IC, FPC and a back light unit and with/without...

General Specification NMLCD-43480272-CTP-CLB-IPS is a 4.3 inch IPS type TFT LCD with Capacitive Touch and Cover Lens Bezel, with 480*272 resolution. The touch panel is driven by FT5446. This...

General Specification NMLCD-43480272-CTP-IPS is a 4.3 inch IPS type TFT LCD with a Capacitive Touch Panel which is 1:1 scale with the LCD module, with 480*272 resolution. This product accords with...

General Specification NMLCD-43480272-IPS is a 4.3 inch IPS type TFT LCD, with 480*272 resolution. This product accords with RoHS. Product Pictures 4.3 inch IPS Type TFT LCD with WQVGA Resolution...

General Specification Product Pictures 4.3 inch TFT LCD with 540*960 High Resolution 4.3 inch High Resolution TFT LCD with Portrait Mode and MIPI Interface

General Specification This type is a 4.3"" 480*272 full view angle TFT LCD with a Capacaitive Touch Panel with full bonding. Product Picture 4.3"" TFT LCD with Capacitive Touch...

NMLCD-43480272-SB is a colour active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor). It is composed of a colour TFT-LCD panel, driver IC, FPC...

Text: panel type 8.4- inch TFT color LCD monitor , the IV-08MP, realizes power saving, automation and cost , series controller can be directly connected to the backside of the IV-08MP monitor and used as one unit , Monitor cable* (Cable length: 2m) Backside of equipment * Monitor cable IV-S50MC2 is sold , Monitor input connector This connector is connected to the monitor output connector of the controller , ) of the mounting surface (thickness: max. 7 mm) to fit the 0 0 IV-08MP into the surface. (When

Abstract: omron plc to ns screen cables pin diagram V520-RH21-6 basic plc ladder diagram XW2Z-200S-CV CJ1W-CIF11 NSJ5-SQ10B-M3D at enhance v520 CJ1W-IC101 XW2Z-200S-V

Text: reduced,addedthe NSJcontrol panel. on later. Wiring and and can ·The number of design steps can be , Ivory 5.7- inch color TFT LCD No Black Ivory 117.2 × 88.4 mm (W × H) Ivory (5.7 inches , Kwords) EM: None 0.04 µs 1 5.7- inch color High256 KB luminance Ivory TFT LCD (See note 2.) Black 320 × 240 (QVGA) No Yes Ivory 8.4- inch color TFT LCD Yes 170.9 × 128.2 , . Now, even the 5.7- inch class models have 60 MB of screen data capacity as a standard feature and also

Text: 5.7- inch STN 320 u 240 dots Yes No 5.7- inch TFT Yes No NS8-V2 8.4- inch TFT 640 u 480 dots Yes No NS10-V2 10.4- inch TFT 640 u 480 dots Yes No NS12-V2 12.1- inch TFT 800 u 600 dots Yes Number of dots , explanation of the cause of the error as well as the countermeasures x Ladder Monitor come as a Standard , the configuration, wiring , and other conditions of the equipment or control panel in which the PLC is , 256 colors NS5-V2 5.7- inch Color STN 5.7- inch Color TFT Text attributes Functional objects

Abstract: omron -ns5-sq10b-v2 PLC Communication cables pin diagram omron NT Example SIMATIC S7 Programming PID function block NS12-TS01-V2 omron CPM1-CIF01 rs 232 manual NS5-SQ omron plc CJ1M CPU 13 troubleshooting NS8-TV00B-V2 NS15-TX01B-V2

Text: . P12 Greatly Improved Ladder Monitor . Enhanced Visibility and Ease of Use , Link Ladder Monitor NS5-MQ Monochrome STN NS8-TV Color TFT NS12-TS Color TFT , the PT. NS system version 8.2 or higher is required. Specifications 7 Previously, all of the , number of pixels is 1.6 times greater than the NS12. With the Ladder Monitor , ladder diagrams can be , Visibility and Ease of Use. e d Featur Standare note.) (Se Note: Not supported for the 5.7- inch model

Text: ) 764-0839 www.redlion.net GTM - GRAPHICAL TANK MONITOR ! MONITORS THE LEVEL AND TEMPERATURE OF , fuse terminal) Type: 1/4 x 1 1/4 inch (6.3 x 32 mm) slow-blow, glass 2. DISPLAY: 10.4" TFT resistive , The GTM - Graphical Tank Monitor is a ready to use system for tank monitoring, complete with level , either by keying in the current signal, or through the use of its built in learn mode. For nonlinear , Crimson software package. The GTM also accepts two, or three-wire, 100 Ohm platinum RTDs to monitor tank

Abstract: cable diagram mitsubishi plc FX2N SERIES A2SH ge fanuc cpu 331 PLC Communication cables pin diagram fanuc 90-30 Allen Bradley PLC micrologix 1200 wiring diagram PLC to pc Communication cables pin diagram siemens Allen Bradley PLC micrologix 1000 Allen Bradley Micrologix 1500 315-2DP

Text: interface eliminates costly investments in wiring and installation of multiple pushbutton indicators on the , touchscreen to monitor and control PLCs in different locations. Depending on PLC type, a maximum of 31 PLCs , 171CCC96020 N/A = Cable not available at this time. Wiring diagram available at www.idec.com/usa/smarttouch , HG9Z-3C145A N/A N/A = Cable not available at this time. Wiring diagram available in WindO/I-nv2 , time. Wiring diagram available in WindO/I-nv2 manual. Visit www.idec.com/manuals. Download Host

Abstract: PC MOTHERBOARD repair MANUAL fault find ups circuit diagram PC MOTHERBOARD SERVICE MANUAL free home ups wiring diagram wiring diagram of ups home ups circuit diagram Wiring DIAGRAM OF 7 INCH TFT MONITOR 500 UPS diagrams free circuit diagram of hard disk

Text: Wiring diagram Wiring according to the wiring diagram (the circuit of PC_ON and PowerStatus is , Fitting the cable Wiring in accordance with wiring diagram Fit the cables for the power supply of the , connector Wiring diagram Fitting the cable Material for assembling the connectors Assembling the , 7 Product Description Interfaces Interfaces of the Built-in Panel PC CP63xx 1 3 4 7 5 2 6 Serial interfaces RS 232 COM1 - COM2 The basic version of the CP63XX Industrial PC

Text: INCREASE MEMORY CAPACITY  10.4- INCH TFT 32K VGA 640X480 PIXEL LCD OR SVGA 800X600 LCD  OUTDOOR UNIT , " TFT VGA Display Operator Interface (indoor), USB Host, Isolated Comms CAUTION: Risk of electric , SIZE 10.4- inch 10.4- inch 10.4- inch TYPE TFT TFT TFT COLORS 32K 32K 32K PIXELS 640 X 480 , standard DH485 cable to connect this port to Allen Bradley equipment. A cable and wiring diagram are , core with integrated functionality. This core allows the G310 to perform many of the normal features

Text: current monitor ITH Outputs short circuit protected to GND and VBatt Diagnosis: - Wiring : short circuit to GND ,short circuit to VBATT or Open load - Ignition coil: assessment of current relating to , time or flag time of channel i and i+3 (bit value x 8µs) DIAGCHx: 2 bits wiring and 2 bits BDI , - / functional diagram Ignition Driver with Diagnosis Customer benefits: Excellent system know-how Smart concepts for system safety Secured supply Long- term availability of manufacturing processes and

Abstract: TFT LCD timing controller T-con car rear camera P-TQFP-64-1 full hd tcon with lvds input LCD monitor TCON LCD TCON TCON color QVGA GRAPHICS LCD DISPLAY TCON

Text: linearity between input and output image data. Since the characteristics of TFT LCDs vary from monitor to monitor , the brightness and color hue of an input image can also vary. Gamma correction is used to , to the timing of various TFT LCDs. This function enables compatibility with a wide range of TFT LCDs , passengers seated in the rear seats of a vehicle. Note 7 : Vehicle-mounted camera system Onboard analog , wiring patterns making up a balanced cable or on a printed circuit board (PCB). * Names of companies

Abstract: ZR-RX40A-E ZR-RX40 DATASHEET PT1000 omron temperature sensor pt100 ZR-XRT1 ZRRX40 multi channel voltage measurement with lcd display pt100 usb transistor ZR

Text: AC adapter. Easy-to-see 5.7 inch color TFT LCD. Comes with bright, easy-to-see, high-intensity 5.7 inch TFT large-scale color LCD panel. Its wide field of vision means it can even be seen at an , drive Internal 12 MB flash-memory 5.7 inch TFT color LCD Easy-to-navigate menus 9 hour battery , Internal 3.5MB flash memory 3.5 inch TFT color LCD Easy-to-navigate menus 6 hour battery (option) M3 , 200 channels All channels isolated Thermocouples 12MB internal memory 5.7 inch TFT LCD

Abstract: wiring diagram of ups PC MOTHERBOARD SERVICE MANUAL free home ups wiring diagram home ups circuit diagram C9900 CP7130 fault find ups circuit diagram PC MOTHERBOARD repair MANUAL free circuit diagram of hard disk

Text: according to the wiring diagram (the circuit of PC_ON and PowerStatus is symbolical): Wiring diagram , connector Connecting Power Supply Cable Cross Sections PC_ON, Power-Status Wiring diagram , Instructions Fitting the cable Wiring in accordance with wiring diagram Fit the cables for the power , power-switch in accordance with the wiring diagram , using the included material for assembling the connectors , stripped cable ends into the opening of the terminal of the 7 -pole connector in accordance with the

Text: 8.4- INCH TFT 32K VGA 640X480 PIXEL LCD 7 -BUTTON KEYPAD FOR ON-SCREEN MENUS THREE FRONT PANEL LEDS , TFT 32K 640 X 480 450 cd/m2 CCFL 50,000 HR TYP. G308C1 7.5- inch TFT 32K 640 X 480 112 , Bradley equipment. A cable and wiring diagram are available from Red Lion. G3 to AB SLC 500 (CBLAB003, GENERAL DESCRIPTION CONTENTS OF PACKAGE The G308 Operator Interface Terminal combines unique , performance core with integrated functionality. This core allows the G308 to perform many of the normal

Abstract: Wiring Diagram s7-300 siemens Wiring Diagram s7-200 siemens FATEK PLC Communication cables pin diagram s7-200 cpu 216-2 PLC Communication cables pin diagram fanuc 90-30 Keyence PLC KV 40 R omron sysmac c20 C40H OMRON Operation Manual sysmac c28h

Text: 4. Names of Components 5. Dimensions and Panel Cut-out 6. Mounting Procedure 7 . Wiring 8 , installed within the angle of 0 to 135 degrees as shown below. Display 0° 1 Wiring 7 1 - 17 , . Connection of a wrong power source may cause a fire. · Wiring should be done by qualified electrician , already programmed panel data. You can select the size of panel such as 5.7 inch display, 7.7 inch , -43EM(for ZM-43) for backup of an internal memory. 9) Ladder monitor ability is carried A ladder figure

Text: helpful in the installation, wiring and inspection of Delta HMI. Before using the product, please read , comply with the electrical standard of the country. Do not modify or remove wiring when power is applied , the information of HMI software operation, software installation and hardware wiring , please refer to , Definition of Serial Communication COM1 Port [A, AE and AS57B(C)STD Series] COM Port PIN 1 2 3 4 5 6 7 8 9 , : Please refer to pin definition of actual model for detailed pin assignments. English- 7 Dimensions

Abstract: GT10-C30R4-8P pin configuration FX-232CAB-1 gt01-c30r4-8p mitsubishi rs232 sc09 programming cable GT10-C30R4-8P Allen Bradley PLC Communication cable pin diagram mitsubishi fx plc programming cable pin wiring diagram gt01-c10r4-8p GT10-C30R2-6P cable diagram

Text: height (mm) Freeely defined display Touch Screen Active area of display W x H (mm) / diagonal ( inch , Active area of display W x H (mm) / diagonal ( inch ) Keyboard Function keys Memory for application , test individual parts of the plant. The PLC programs can be monitored graphically (ladder diagram ). , Function card to use additional functionality of GT1500 HMIs and System Q/QnA/A/FX monitor £116.00 , range of E1000 Series & NEW GOT1000 series Portable PCs & Software This document contains list

Text: Monitor input and output contact states. Power-on time ≠Equipment operating time Number of ON , applications 2 3 Compact design Incorporates the functionality and performance of a modular PLC in an outstanding compact format 1 Traceability FP7: Seven steps to higher efficiency 7 5 Traces the values of variables over a certain time frame during program execution 4 , Advanced motion control (cam & gear) Offers a variety of control options, from simple position control

Abstract: c9900-e169 schematic diagram on line UPS WELL outside plant access cabinet home ups wiring diagram schematic diagram UPS PC MOTHERBOARD SERVICE MANUAL ups circuit schematic diagram repair C9900 C9900-K292

Text: (the circuit of PC_ON and PowerStatus is symbolical): Wiring diagram power supply and external wiring , down the PC PC_ON and Power Status functions Wiring diagram Connecting the Network Pre-assembled , . The picture shows the earthing connection in the wiring area of the PC (see arrow). The earthing , diagram of power supply unit wirings Innovative solution for shutting down Industrial PCs , . CP72xx 13 Installation Instructions Connecting Power Supply The external wiring consists of

Abstract: NL2432HC17-07B NL8048HL11-01B NL2432HC22-41B 7 inch TFT LCD WVGA NL9654HL06-01J NL2432HC22 NL2432HC22-40A nec display nl4864HL11-02a NL8048HL11-01A

Text: applications and applied their knowledge of the market requirements to the design of small-sized TFT LCD modules. NEC offers a variety of small-size amorphous silicon (a-Si) TFT LCD products as well as , the peripheral wiring of the glass substrate and in the number of connections with external circuits. This results in pixel density that is four times higher than that of conventional 3.5- inch quarter VGA , NL2432HC17-04A 2.7- inch Part Number NL2432HC17-10B Out of concern for the environment, NEC LCD

Text: ® SOCKET FOR DATABASE/RECIPE STORAGE AND DATA LOGGING 15- INCH TFT ACTIVE MATRIX 32K COLOR XGA 1024 X 768 , N-m) 13. WEIGHT: 11.41 lbs (5.17 Kg) 15- inch TFT 32K 1024 X 768 600 cd/m2 50,000 HR TYP , Allen Bradley equipment. A cable and wiring diagram are available from Red Lion. Connections G3 , TFT XGA DISPLAY AND TOUCHSCREEN          C UL , POWERED BY 24 VDC ±20% SUPPLY RESISTIVE ANALOG TOUCHSCREEN CONTENTS OF PACKAGE The G315C Operator

Text: . . 1 2.2 Simultaneous drive of CRT monitor and flatpanel , . . 7 6.3 B/W- / Plasma-Displays / Mono TFT . , WD90C24. 2.2 Simultaneous drive of CRT monitor and flatpanel The Dotcard-Speedcolor only supports a , TFT displays This 24 pin male header with a pitch of 2.54 mm is designed for the connection of 9 , potentiometer Pin grouping 4.8 J3: J4: Wiring proposal Adjustment of the +V0 voltage Pin

Abstract: Connector 30pin lcd 9 watt cfl circuit diagram ITSX95 cfl circuit diagram of 12 volts Connector 30pin lcd jae lcd screen LVDS connector 30 pins lcd screen LVDS connector 40 pins JAE FI-xb30s-hf10 Vsync

Text: following diagram shows the functional block of this Type 15.0 Color TFT /LCD Module. The first LVDS port , Inverter. To update Power Consumption. To update Reference Drawing as of September 1,2000. 1,5,6, 7 6 , is used in this module, take care of static electricity and insure human earth when handling. 7 ) Do , at the far ends of the CFL Reflector edge softly. Otherwise the TFT Module may be damaged. 11) At , Interface Connector of the TFT Module. 12) After installation of the TFT Module into an enclosure

Text: Long Logger System SI Onboard Long Logger System FEATURES • 1% of net payload • Easy to , set-alarm points • Supervisor lock-out • Color TFT graphic display with LED backlight • Optional , cells for the truck and trailer. The easy-to-install and operate system consists of load cells and , transmitters, and all the necessary wiring . APPLICATIONS • Forestry/logging • Bulk hauling • Aggregate SYSTEM BLOCK DIAGRAM Document Number: 11948 Revision: 03-May-12 Technical contact in

Abstract: schema monitor crt 3,3V Spannungsregler fotowiderstand lcd backlight inverter schema schema Lcd monitor schema inverter connettore d-sub circuito stampato lcd panel schema vga pcb D-sub connector

Text: setting for deliver of graphic boards to use with TFT displays. 4. DIP Switch settings With the DIP , and the PCB. 6. Pin out of the connector X9 and X5 (table 1) Pin # 1 2 3 4 5 6 7 8 9 10 , 22 24 5 3 1 9 28 40;42 44 2;4;6;8;14;14;20;26 7 Pin out of connector X7 and X8 (table 2 , ) Monitor (VGA) Stift Nr. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 X9 Rot Grün Blau Nicht , Issued / Herausgegeben / Publicatto V10816 09/00 Digital PCI Bus Interface Card for TFT

Abstract: 6 pins socket mini -din mouse connector Floppy connector 34 pin IDC 8255 connect with led 6 pin MINI DIN VGA pinout 486SX-25 8255 keyboard interfacing interfacing floppy disk drive with microcontroller 386SX GRAPHICAL LCD INTERFACING DIAGRAM

Text: product to make the connection between the module and your monitor . The details of the cable are as , drive CRT displays. Please insure that you follow the follow the above wiring diagram carefully , developed to serve most markets quickly. The limitations of such solutions are well documented but include the difficulty of expansion, limited performance and the frustrations of simulations running , . Despite these hurdles micro-controllers dominated the development labs as the majority of products only

In this Arduino touch screen tutorial we will learn how to use TFT LCD Touch Screen with Arduino. You can watch the following video or read the written tutorial below.

As an example I am using a 3.2” TFT Touch Screen in a combination with a TFT LCD Arduino Mega Shield. We need a shield because the TFT Touch screen works at 3.3V and the Arduino Mega outputs are 5 V. For the first example I have the HC-SR04 ultrasonic sensor, then for the second example an RGB LED with three resistors and a push button for the game example. Also I had to make a custom made pin header like this, by soldering pin headers and bend on of them so I could insert them in between the Arduino Board and the TFT Shield.

Here’s the circuit schematic. We will use the GND pin, the digital pins from 8 to 13, as well as the pin number 14. As the 5V pins are already used by the TFT Screen I will use the pin number 13 as VCC, by setting it right away high in the setup section of code.

I will use the UTFT and URTouch libraries made by Henning Karlsen. Here I would like to say thanks to him for the incredible work he has done. The libraries enable really easy use of the TFT Screens, and they work with many different TFT screens sizes, shields and controllers. You can download these libraries from his website, RinkyDinkElectronics.com and also find a lot of demo examples and detailed documentation of how to use them.

After we include the libraries we need to create UTFT and URTouch objects. The parameters of these objects depends on the model of the TFT Screen and Shield and these details can be also found in the documentation of the libraries.

So now I will explain how we can make the home screen of the program. With the setBackColor() function we need to set the background color of the text, black one in our case. Then we need to set the color to white, set the big font and using the print() function, we will print the string “Arduino TFT Tutorial” at the center of the screen and 10 pixels  down the Y – Axis of the screen. Next we will set the color to red and draw the red line below the text. After that we need to set the color back to white, and print the two other strings, “by HowToMechatronics.com” using the small font and “Select Example” using the big font.

The TFT-LCD (Flat Panel) Antitrust Litigationclass-action lawsuit regarding the worldwide conspiracy to coordinate the prices of Thin-Film Transistor-Liquid Crystal Display (TFT-LCD) panels, which are used to make laptop computers, computer monitors and televisions, between 1999 and 2006. In March 2010, Judge Susan Illston certified two nationwide classes of persons and entities that directly and indirectly purchased TFT-LCDs – for panel purchasers and purchasers of TFT-LCD integrated products; the litigation was followed by multiple suits.

TFT-LCDs are used in flat-panel televisions, laptop and computer monitors, mobile phones, personal digital assistants, semiconductors and other devices;

In mid-2006, the U.S. Department of Justice (DOJ) Antitrust Division requested FBI assistance in investigating LCD price-fixing. In December 2006, authorities in Japan, Korea, the European Union and the United States revealed a probe into alleged anti-competitive activity among LCD panel manufacturers.

The companies involved, which later became the Defendants, were Taiwanese companies AU Optronics (AUO), Chi Mei, Chunghwa Picture Tubes (Chunghwa), and HannStar; Korean companies LG Display and Samsung; and Japanese companies Hitachi, Sharp and Toshiba.cartel which took place between January 1, 1999, through December 31, 2006, and which was designed to illegally reduce competition and thus inflate prices for LCD panels. The companies exchanged information on future production planning, capacity use, pricing and other commercial conditions.European Commission concluded that the companies were aware they were violating competition rules, and took steps to conceal the venue and results of the meetings; a document by the conspirators requested everybody involved "to take care of security/confidentiality matters and to limit written communication".

Companies directly affected by the LCD price-fixing conspiracy, as direct victims of the cartel, were some of the largest computer, television and cellular telephone manufacturers in the world. These direct action plaintiffs included AT&T Mobility, Best Buy,Costco Wholesale Corporation, Good Guys, Kmart Corp, Motorola Mobility, Newegg, Sears, and Target Corp.Clayton Act (15 U.S.C. § 26) to prevent Defendants from violating Section 1 of the Sherman Act (15 U.S.C. § 1), as well as (b) 23 separate state-wide classes based on each state"s antitrust/consumer protection class action law.

In November 2008, LG, Chunghwa, Hitachi, Epson, and Chi Mei pleaded guilty to criminal charges of fixing prices of TFT-LCD panels sold in the U.S. and agreed to pay criminal fines (see chart).

The South Korea Fair Trade Commission launched legal proceedings as well. It concluded that the companies involved met more than once a month and more than 200 times from September 2001 to December 2006, and imposed fines on the LCD manufacturers.

Sharp Corp. pleaded guilty to three separate conspiracies to fix the prices of TFT-LCD panels sold to Dell Inc., Apple Computer Inc. and Motorola Inc., and was sentenced to pay a $120 million criminal fine,

Seven executives from Japanese and South Korean LCD companies were indicted in the U.S. Four were charged with participating as co-conspirators in the conspiracy and sentenced to prison terms – including LG"s Vice President of Monitor Sales, Chunghwa"s chairman, its chief executive officer, and its Vice President of LCD Sales – for "participating in meetings, conversations and communications in Taiwan, South Korea and the United States to discuss the prices of TFT-LCD panels; agreeing during these meetings, conversations and communications to charge prices of TFT-LCD panels at certain predetermined levels; issuing price quotations in accordance with the agreements reached; exchanging information on sales of TFT-LCD panels for the purpose of monitoring and enforcing adherence to the agreed-upon prices; and authorizing, ordering and consenting to the participation of subordinate employees in the conspiracy."

On December 8, 2010, the European Commission announced it had fined six of the LCD companies involved in a total of €648 million (Samsung Electronics received full immunity under the commission"s 2002 Leniency Notice) – LG Display, AU Optronics, Chimei, Chunghwa Picture and HannStar Display Corporation.

On July 3, 2012, a U.S. federal jury ruled that the remaining defendant, Toshiba Corporation, which denied any wrongdoing, participated in the conspiracy to fix prices of TFT-LCDs and returned a verdict in favor of the plaintiff class. Following the trial, Toshiba agreed to resolve the case by paying the class $30 million.

In this lesson we’ll try to sort through the confusion in how to use these beautiful, full-colour TFT LCD displays and wire them in preparation for our next lesson.

This ST7735S 1.8" TFT Display features a resolution of 128×160 and SPI (4-wire) communication. Integrated with an SD card slot, it allows you to easily read full-color bitmaps from the SD card.

The module provides users with two wiring methods: pin header wiring and GDI (General Display interface). You can directly connect the display to a FireBeetle main controller using an FPC cable. Plug and play, easy to wire. Besides, the display supports a low refresh rate and offers a good display effect and strong versatility.

, Ltd Address: 4/F, Block 2, Fusen Technology Park, Hangcheng Blvd., Bao"an District, Shenzhen 518126, Guangdong, P.R.China Web: www.szosen.com Tel:+86-0755-61181561 Fax:+86-755-61587308 Email: sandy@szosen.com Price ListMobile: 86-13590463156 Price Terms: EXW ShenzhenSix Channel ECG Unit price (USD)Model: ECG-8160 Standard configuration including: Main unit Electric power source $380 5 inch color TFT LCD screen English software and markTwelve Channel ECG Unit price (USD)Model:ECG-8112 Standard configuration including: Main unit Electric power source $650 7 inch color TFT LCD screen English software and mark12.1 inch Patient Monitor Unit price (USD)Model:OSEN9000 Standard configuration including: Main unit White plastic casing $480 12.1 inch color TFT screen English programme and mark PR.ECG,RESP,NIBP,TEMP,SpO28 inch Patient Monitor Unit price (USD)Model:OSEN9000C Standard configuration including: Main unit White plastic casing $350 8 inch color TFT screen English programme and mark PR.ECG,RESP,NIBP,TEMP,SpO215 inch Patient Monitor Unit price (USD)Model:OSEN-9000D Standard configuration including: Main Unit Cyan plastic casing 15 inch color TFT display $550 English software and mark PR.ECG,RESP,NIBP,TEMP,SpO2Infusion Pump Unit price (USD)Model:OIP-900 Standard configuration including: 4.3 Inch Color TFT display 210 Drug library $280 Optional NIBP and SpO2 Data storageSyringe Pump Unit price (USD)Model:OSP-500 Standard configuration including: 4.3 Inch Color TFT display 4 working modes $280 Remote Control User Manual (English)7 inch Fetal Monitor Unit price (USD)Model:OSEN-9000E Standard configuration including: Compact and light weight design Built-in high do matrix thermal printer with long life $560 7 inch color TFT display, folding 90 degree Optional: Twins monitoring, FAS(fetal acoustic similator) Auto fetal moovement are available

Fetal Monitor Unit price (USD)Model: OSEN-9000A Standard configuration including: 12"1 Inch Color TFT display, 90 degree folding Auto fetal moovement are available $750 Optional: Twins monitoring, FAS(fetal acoustic similator) Build-in interface to the central nurse station

Fetal/Maternal Monitor Unit price (USD)Model: OSEN-9000B Standard configuration including: 12"1 Inch Color TFT display, 90 degree folding Auto fetal moovement are available $1,250 Optional: Twins monitoring, FAS(fetal acoustic similator) Build-in interface to the central nurse station

Vital Signs Monitor Unit price (USD)Model:OSEN3000E Standard configuration including: Unique outline design, skillful and portable Intelligent measuring of SPO2/PR/PLETH/TEMP $240 Built-in rechargeable li-ion battery can connect to PC for data storage/review/print

Stand/trolley for patient Monitor/Vital Signs Monitor $100 Wall mount for monitor/Vital Signs Monitor $90 IBP for patient Monitor $80 Options for Patient Monitor/vital signs EtCo2 for Patient Monitor $600 monitor Touch Screen $60 Printer/Thermal Recorder $60 Central Monitoring system software (if QTY=20pcs, will supply software free) $80Options for ECG machine ECG work station software $100

A one-terminal unit with a color video camera METAKOM MK-1-XRV-N is designed for installation in the entrances of residential buildings, at the entrance doors of apartments, offices, etc. Together with the subscriber video monitor METAKOM MKV-VM1, COMMAX DPV-4MT (KE, HP), KOCOM KVM-604, etc. the provides video surveillance of the space in front of the entrance door (option with built-in video camera), subscriber"s audio connection with the visitor and remote lock opening. The presence of infrared illumination allows you to get an image on a video monitor (at a distance to the observed object max 1m.) Even in the total absence of illumination.

A one-terminal outdoor panel unit with a color video camera METAKOM MK-1-XRV-E is designed for installation in the entrances of residential buildings, at the entrance doors of apartments, offices, etc. Together with the subscriber video monitor METAKOM MKV-VM1, COMMAX DPV-4MT (KE, HP), KOCOM KVM-604, etc. the outdoor panel provides video surveillance of the space in front of the entrance door (option with built-in video camera), subscriber"s audio connection with the visitor and remote lock opening. The presence of infrared illumination allows you to get an image on a video monitor (at a distance to the observed object max 1m.) Even in the total absence of illumination.

The one-terminal outdoor panel of the video doorphone METAKOM MK-1-XRV-E-TM is designed for installation in the entrances of residential buildings, at the entrance doors of apartments, offices, etc. Together with the subscriber video monitors MKV-VM5, MKV-VM8 and others, the video doorphone outdoor panel provides the subscriber"s audio connection with the visitor, remote lock opening, video surveillance of the space in front of the entrance door. The presence of infrared illumination allows you to obtain an image on a video monitor (at a distance to the observed object max 1 m), even in the total absence of illumination.

The one-terminal outdoor panel of the video doorphone METAKOM MK-1-XRV-E-RF is designed for installation in the entrances of residential buildings, at the entrance doors of apartments, offices, etc. Together with the subscriber video monitors MKV-VM5, MKV-VM8 and others, the video doorphone outdoor panel provides the subscriber"s audio connection with the visitor, remote lock opening, video surveillance of the space in front of the entrance door. The presence of infrared illumination allows you to obtain an image on a video monitor (at a distance to the observed object max 1 m), even in the total absence of illumination.

The two-way video doorphone outdoor panel METAKOM MK2-XV-MF is intended for installation in the entrances of apartment houses, at the entrance doors of apartments, offices, etc. Together with the subscriber video monitors MKV-VM5, MKV-VM8 and others, the video doorphone outdoor panel provides the subscriber"s audio connection with the visitor, remote lock opening and the video surveillance of the space in front of the entrance door. The presence of infrared illumination allows you to obtain an image on a video monitor (at a distance to the observed object not more than 1 m), even in the total absence of illumination.

The video doorphone outdoor panel METAKOM MK2-XV-TM is intended for installation in the entrances of apartment houses, at the entrance doors of apartments, offices, etc. It is possible to work together with subscriber devices manufactured by METAKOM (video monitors MKV-VM1, MKV-VM3, MKV-VM5, MKV-VM6, MKV-VM7, MKV-VM8, MKV-VM9, TKP-14X) and others.

The two-way video doorphone outdoor panel METAKOM MK2-XV-RF is intended for installation in the entrances of apartment houses, at the entrance doors of apartments, offices, etc. Together with the subscriber video monitors MKV-VM5, MKV-VM8 and others, the video doorphone outdoor panel provides the subscriber"s audio connection with the visitor, remote lock opening and the video surveillance of the space in front of the entrance door. The presence of infrared illumination allows you to obtain an image on a video monitor (at a distance to the observed object not more than 1 m), even in the total absence of illumination.

Four-subscriber intercom video outdoor panel METAKOM MK4-XV-TM is designed for installation in the entrances of apartment houses, at the entrance doors of apartments, offices, etc. Together with the subscriber video monitors MKV-VM5, MKV-VM8 and others, the video door phone outdoor panel provides the subscriber"s audio connection with the visitor, remote opening of the lock, and video surveillance of the space in front of the entrance door. The presence of infrared illumination allows you to obtain an image on a video monitor (at a distance to the observed object not more than 1 m), even in the total absence of illumination.

Four-subscriber intercom video outdoor panel METAKOM MK4-XV-RF is designed for installation in the entrances of residential buildings, at the entrance doors of apartments, offices, etc. Together with the subscriber video monitors MKV-VM5, MKV-VM8 and others, the video door phone outdoor panel provides the subscriber"s audio connection with the visitor, remote opening of the lock, video surveillance of the space in front of the entrance door. The presence of infrared illumination allows you to obtain an image on a video monitor (at a distance to the observed object not more than 1 m), even in the total absence of illumination.

Six-subscriber video intercom outdoor panel METAKOM MK6-XV-TM is designed for installation in the entrances of residential buildings, at the entrance doors of apartments, offices, etc. Together with the subscriber video monitors MKV-VM5, MKV-VM8 and others, video intercom outdoor panel provides the subscriber"s audio connection with the visitor, remote opening of the lock, video surveillance of the space in front of the entrance door. The presence of infrared illumination allows you to obtain an image on a video monitor (at a distance to the observed object not more than 1 m), even in the total absence of illumination.

Six-subscriber video intercom outdoor panel METAKOM MK6-XV-RF is designed for installation in the entrances of residential buildings, at the entrance doors of apartments, offices, etc. Together with the subscriber video monitors MKV-VM5, MKV-VM8 and others, the video door phone outdoor panel provides the subscriber"s audio connection with the visitor, remote opening of the lock, video surveillance of the space in front of the entrance door. The presence of infrared illumination allows you to obtain an image on a video monitor (at a distance to the observed object not more than 1 m), even in the total absence of illumination.

Six-subscriber video intercom outdoor panel METAKOM MK6-XV-MF is designed for installation in the entrances of residential buildings, at the entrance doors of apartments, offices, etc. Together with the subscriber video monitors MKV-VM5, MKV-VM8 and others, the video door phone outdoor panel provides the subscriber"s audio connection with the visitor, remote opening of the lock, video surveillance of the space in front of the entrance door. The presence of infrared illumination allows you to obtain an image on a video monitor (at a distance to the observed object not more than 1 m), even in the total absence of illumination.

The intercom video outdoor panel METAKOM MK10.2-TM4EVis intended for installation in multi-apartment buildings, offices for the organization of selector communication with coordinate system of addressing with number of subscribers up to 10. Work is carried out in conjunction with subscriber devices manufactured by METAKOM (video monitors MKV-VM5, MKV-VM7, MKV-VM8, hands-free living rooms TKP-01, TKP-05M, TKP-06M, TKP-10M, TKP-12M, TKP-14M or others , Designed for intercoms with coordinate system of addressing)

The intercom video outdoor panel МЕТАКОММК10.2-TM4EVNis intended for installation in apartment houses, offices for the organization of selector communication with coordinate system of addressing with number of subscribers up to 10. Work is carried out in conjunction with subscriber devices manufactured by METAKOM (video monitors MKV-VM5, MKV-VM7, MKV-VM8, hands-free living rooms TKP-01, TKP-05M, TKP-06M, TKP-10M, TKP-12M, TKP-14M or others , Intended for intercoms with coordinate system of addressing).

The intercom video outdoor panel METAKOM MK10.2-MFEV is designed for installation in multi-apartment buildings, offices for organizing intercoms with a coordinate system of addressing with a number of subscribers up to 10. Together with the subscriber video monitors METAKOM MKV-VM5, METAKOM MKV-VM7, METAKOM MKV-VM8 and others designed for work with video intercoms with coordinate system of addressing, the MK10.2-MFEVvideo outdoor panel provides video surveillance of the space in front of the entrance door, With the visitor and remote opening of the lock.

The intercom video outdoor panel МЕТАКОМ МК10.2-MFEVN is designed for installation in multi-apartment buildings, offices for organizing intercoms with a coordinate system of addressing with a number of subscribers up to 10. Together with the subscriber video monitors METAKOM MKV-VM5, METAKOM MKV-VM7, METAKOM MKV-VM8 and others designed for work with video intercoms with coordinate system of addressing, the MK10.2-MFEV video outdoor panel provides video surveillance of the space in front of the entrance door, With the visitor and remote opening of the lock.

The intercom video outdoor panel METAKOM MK20.2-TM4EV is intended for installation in multi-apartment houses, offices for the organization of selector communication with coordinate system of addressing with number of subscribers up to 20. Work is carried out in conjunction with subscriber devices manufactured by METAKOM (video monitors MKV-VM5, MKV-VM7, MKV-VM8, hands-free living rooms TKP-01, TKP-05M, TKP-06M, TKP-10M, TKP-12M, TKP-14M or others , Intended for intercoms with coordinate system of addressing).

The intercom video outdoor panel METAKOM MK20.2-RFEV is intended for installation in multi-apartment buildings, offices for the organization of selector communication with coordinate system of addressing with the number of subscribers up to 20. Work is carried out in conjunction with subscriber devices manufactured by METAKOM (video monitors MKV-VM5, MKV-VM7, MKV-VM8, hands-free living rooms TKP-01, TKP-05M, TKP-06M, TKP-10M, TKP-12M, TKP-14M or others , Intended for intercoms with coordinate system of addressing).

The intercom video outdoor panel METAKOM MK20.2-TM4EVNis intended for installation in multi-apartment houses, offices for the organization of selector communication with coordinate system of addressing with number of subscribers up to 20. Work is carried out in conjunction with subscriber devices manufactured by METAKOM (video monitors MKV-VM5, MKV-VM7, MKV-VM8, hands-free living rooms TKP-01, TKP-05M, TKP-06M, TKP-10M, TKP-12M, TKP-14M or others , Intended for intercoms with coordinate system of addressing).

The intercom video outdoor panel METAKOM MK2.2-MFEVis designed for installation in multi-apartment buildings, offices for organizing intercoms with a coordinate system of addressing with a number of subscribers up to 20. Work is carried out in conjunction with subscriber devices manufactured by METAKOM (video monitors MKV-VM5, MKV-VM7, MKV-VM8, hands-free living rooms TKP-01, TKP-05M, TKP-06M, TKP-10M, TKP-12M, TKP-14M or others , Intended for intercoms with coordinate system of addressing).

The intercom video outdoor panel METAKOMМК20.2-MFEVN is intended for installation in apartment houses, offices for the organization of selector communication with coordinate system of addressing with number of subscribers up to 20. Work is carried out in conjunction with subscriber devices manufactured by METAKOM (video monitors MKV-VM5, MKV-VM7, MKV-VM8, hands-free living rooms TKP-01, TKP-05M, TKP-06M, TKP-10M, TKP-12M, TKP-14M or others , Intended for intercoms with coordinate system of addressing).

The intercom video outdoor panel METAKOM MK20.2-RFEVN is designed for installation in multi-apartment buildings, offices for organizing intercoms with a coordinate system of addressing with a number of subscribers up to 20. Work is carried out together with subscriber devices manufactured by METAKOM (video monitors MKV-VM5, MKV-VM7, MKV-VM8, TKP-01, TKP-05M, TKP-06M, TKP-10M, TKP-12M, TKP-14M or others designed for intercoms with coordinate system of addressing). The MK20.2-RFEVN video intercom outdoor panel provides video surveillance of the space in front of the entrance door, the subscriber"s audio connection with the visitor and remote opening of the lock. The MK20.2-RFEVN video intercom is equipped with a built-in RF proximity reader (frequency 125 kHz). Possibility of the organization of intercom network type 1 Master / 16 Slave.

The intercom video outdoor panel Metakom MK2003.2-TM4EVis designed for installation in apartment houses, offices for organizing intercom system with the coordinate address with the number of subscribers to 999 (using multiple switches). Work is carried out in conjunction with subscriber devices manufactured by METAKOM (video monitors MKV-VM5, MKV-VM7, MKV-VM8, hands-free living rooms TKP-01, TKP-05M, TKP-06M, TKP-10M, TKP-12M, TKP-14M or others , Intended for intercoms with coordinate system of addressing).

The intercom video outdoor panel METAKOM MK2003.2-RFEV is designed for installation in multi-apartment buildings, offices for organizing intercoms with a coordinate system of addressing with a number of subscribers up to 999 (when using several switches). Work is carried out in conjunction with subscriber devices manufactured by METAKOM (video monitors MKV-VM5, MKV-VM7, MKV-VM8, hands-free living rooms TKP-01, TKP-05M, TKP-06M, TKP-10M, TKP-12M, TKP-14M or others , Intended for intercoms with coordinate system of addressing).

The intercom video outdoor panel METAKOM MK2003.2-TM4EVNis designed for installation in multi-apartment buildings, offices for organizing intercoms with a coordinate system of addressing with a number of subscribers up to 999 (when using several switches). Work is carried out in conjunction with subscriber devices manufactured by METAKOM (video monitors MKV-VM5, MKV-VM7, MKV-VM8, hands-free living rooms TKP-01, TKP-05M, TKP-06M, TKP-10M, TKP-12M, TKP-14M or others , Intended for intercoms with coordinate system of addressing).

The intercom video outdoor panel METAKOM MK2003.2-RFEVN is designed for installation in multi-apartment buildings, offices for organizing intercoms with a coordinate system of addressing with a number of subscribers up to 999 (when using several switches). Work is carried out in conjunction with subscriber devices manufactured by METAKOM (video monitors MKV-VM5, MKV-VM7, MKV-VM8, hands-free living rooms TKP-01, TKP-05M, TKP-06M, TKP-10M, TKP-12M, TKP-14M or others , Intended for intercoms with coordinate system of addressing).

The intercom video outdoor panel METAKOM MK2003.2-MFEV is designed for installation in multi-apartment buildings, offices for organizing intercoms with a coordinate system of addressing with a number of subscribers up to 999 (when using several switches). Work is carried out in conjunction with subscriber devices manufactured by METAKOM (video monitors MKV-VM5, MKV-VM7, MKV-VM8, hands-free living rooms TKP-01, TKP-05M, TKP-06M, TKP-10M, TKP-12M, TKP-14M or others , Intended for intercoms with coordinate system of addressing).

The intercom video outdoor panel METAKOM MK2003.2-MFEVN is designed for installation in multi-apartment buildings, offices for organizing intercoms with a coordinate system of addressing with a number of subscribers up to 999 (when using several switches). Work is carried out in conjunction with subscriber devices manufactured by METAKOM (video monitors MKV-VM5, MKV-VM7, MKV-VM8, hands-free living rooms TKP-01, TKP-05M, TKP-06M, TKP-10M, TKP-12M, TKP-14M or others , Intended for intercoms with coordinate system of addressing).

The intercom video outdoor panel METAKOM MK2012-MFEV is designed for installation in multi-apartment buildings, offices for organizing intercoms with a coordinate system of addressing with a number of subscribers up to 999 (when using several switches). Work is carried out in conjunction with subscriber devices manufactured by METAKOM (video monitors MKV-VM5, MKV-VM7, MKV-VM8, hands-free living rooms TKP-01, TKP-05M, TKP-06M, TKP-10M, TKP-12M, TKP-14M or others , Intended for intercoms with coordinate system of addressing).

The intercom video outdoor panel METAKOM MK2012-RFEV is designed for installation in multi-apartment buildings, offices for organizing intercoms with a coordinate system of addressing with a number of subscribers up to 999 (when using several switches). Work is carried out in conjunction with subscriber devices manufactured by METAKOM (video monitors MKV-VM5, MKV-VM7, MKV-VM8, hands-free living rooms TKP-01, TKP-05M, TKP-06M, TKP-10M, TKP-12M, TKP-14M or others , Intended for intercoms with coordinate system of addressing).

The intercom video outdoor panel METAKOM MK2012-TM4EV is designed for installation in multi-apartment buildings, offices for the organization of selector communication with coordinate system of addressing with the number of subscribers up to 999 (when using several switches). Work is carried out in conjunction with subscriber devices manufactured by METAKOM (video monitors MKV-VM5, MKV-VM7, MKV-VM8, hands-free living rooms TKP-01, TKP-05M, TKP-06M, TKP-10M, TKP-12M, TKP-14M or others , Intended for intercoms with coordinate system of addressing).

The intercom video outdoor panel METAKOM MK2012-TM4EVN is designed for installation in multi-apartment buildings, offices for organizing intercoms with a coordinate system of addressing with a number of subscribers up to 999 (when using several switches). Work is carried out in conjunction with subscriber devices manufactured by METAKOM (video monitors MKV-VM5, MKV-VM7, MKV-VM8, hands-free living rooms TKP-01, TKP-05M, TKP-06M, TKP-10M, TKP-12M, TKP-14M or others , Intended for intercoms with coordinate system of addressing).

The intercom video outdoor panel METAKOM MK2012-RFEVNis designed for installation in multi-apartment buildings, offices for organizing intercoms with a coordinate system of addressing with a number of subscribers up to 999 (when using several switches). Work is carried out in conjunction with subscriber devices manufactured by METAKOM (video monitors MKV-VM5, MKV-VM7, MKV-VM8, hands-free living rooms TKP-01, TKP-05M, TKP-06M, TKP-10M, TKP-12M, TKP-14M or others , Intended for intercoms with coordinate system of addressing).

The intercom video outdoor panel METAKOM MK2012-MFEVNis designed for installation in multi-apartment buildings, offices for organizing intercoms with a coordinate system of addressing with a number of subscribers up to 999 (when using several switches). Work is carried out in conjunction with subscriber devices manufactured by METAKOM (video monitors MKV-VM5, MKV-VM7, MKV-VM8, hands-free living rooms TKP-01, TKP-05M, TKP-06M, TKP-10M, TKP-12M, TKP-14M or others , Intended for intercoms with coordinate system of addressing).

Color video monitor METAKOM MKV-VM10 is designed to organize access control and two-way audio and video communication with the visitor. The monitor can be connected to one outdoor panel manufactured by METAKOM (MK1, MK2, MK4, MK6), working on a 4-wire connection system, one outdoor panel manufactured by METAKOM, working with a coordinate system of addressing, and an additional external video camera. The video monitor is fully adapted for connection to coordinate intercoms - METAKOM, VIZIT, CYFRAL and their analogues, without using the interface module.

Single-channel color (TFT 3,5U) video monitor METAKOM MKV-VM7 is designed to work in video intercom systems with coordinate system of addressing METAKOM, video monitor provides maintenance of two video inputs, one of which is combined with an external audio channel, the other - independent. Audio channel is missing. The video monitor is fully adapted for connection to coordinate intercoms - METAKOM, VIZIT, CYFRAL and their analogues, without the use of the interface module.

RVi-VD1 mini - Video monitor; Color display: 3.5 "TFT LCD for four-wire access control systems; Resolution: 320x240; Brightness: 300 cd / cm2; Power: DC 13.5V (PSU included); Color: black; Mounting: Wall (bracket in kit). Dimensions: 160x90x21mm Can be used as a part of the following metakom equipment: MK-1XRV, MK2-XV, MK4-XV, MK6-XV, connected to the coordinate outdoor panels via the MK-032K interface module (not included).

Color video monitor METAKOM MKV-VM8 is designed to organize access control and two-way audio and video communications with the visitor as part of the intercoms METAKOM. One METAKOM outdoor panel, working on a 4-wire connection system, one METAKOM outdoor panel that works with the coordinate system of addressing, as well as an additional external video camera and an optional monitor (option) can be connected to the monitor. The video monitor is fully adapted for connection to coordinate intercoms - METAKOM, VIZIT, CYFRAL and their analogues, without using the interface module.

Video monitor Tantos Amelie with a screen 7 "", hands free, control is carried out by touch buttons. Connection of 2 outdoor panels and 2 cameras, the ability to connect up to 4 monitors in one system with the wide possibilities of the address intercom.Voice mail, photo frame, built-in DVR (motion detector for 1 channel) Ability to set the melody in MP3 format as a ring signal (in firmware above 3.10).

CTV-M1700M video monitor is designed to organize access control and two-way audio and video communication with the visitor with the connected answer part - the calling panel. The CTV-M1700M monitor allows the operator to communicate without physical contact with a person who wants to enter the premises, and to restrict or allow access to the premises. This provides a high level of convenience and safety.

Color video intercom J2000-DF-Cristina with a 7-inch screen, hands free. Maximum connection: 2 outdoor panels. Classic mechanical control buttons. Power supply monitor 220V (built-in power supply) + power supply from 12V. Mounted fastening. To the coordinate blocks of the call is connected via the interface module MK-032K (not included). Dimensions: 193х122х21 mm.

KW-E400FC Kenwei Color video intercom monitor with handset, LCD TFT 4 ", PAL / NTSC, 12 polyphonic ring tones Touch buttons: Supports full connection to the addressable intercom up to 4 monitors in the system only with KW-E400FC and KW-E401FC (outdoor panel, address calls between the monitors.).

Monitor for color video intercom without handset KW-E401FC Kenwei, LCD TFT 4 ", PAL, 12 polyphonic ringtones .Sensor buttons .It is possible to fully connect to the address intercom up to 4 monitors in the system only with KW-E400FC and KW-E401FC Panels, address calls between monitors.)

Color video intercom monitor with KW-E705FC-W200 Kenwei handset, LCD TFT 7 ", 16: 9, PAL / NTSC, automatic or manual recording of color photos or video to SD card up to 32GB, touch control buttons, advanced intuitive Russian menu. Polyphonic ringtones Max connection: 2 outdoor panels + 2 video cameras + 7 additional KENWEI monitors (support for address calls between monitors), with the possibility of additional connection to each additional monitor of additional video cameras, connection of a door bell, Automatic relay control for gates or other devices, don’t disturb the function, support call forwarding to any phone with the KW-401G with the ability to remotely control the lock, set the screen switching time from infinity to several seconds, power the monitor 220V (built-in power supply) or from 12V, the possibility of powering video cameras from the monitor (output 13.5V, 1.5A) .The coordinate outdoor panelsare connected via the interface module MK-032K (not included).

Color video intercom monitor with KW-E706FC-W200 Kenwei handset, LCD TFT 7 ", 16: 9, PAL / NTSC, automatic or manual recording of color photos or video to SD card up to 32GB, touch control buttons, advanced intuitive Russian menu. Polyphonic ringtones Max connection: 2 outdoor panels + 2 video cameras + 7 additional KENWEI monitors (support for address calls between monitors), with the possibility of additional connection to each additional monitor of additional video cameras, connection of a door bell, Automatic relay control for gates or other devices, don’t disturb the function, support call forwarding to any phone with the KW-401G with the ability to remotely control the lock, set the screen switching time from infinity to several seconds, power the monitor 220V (built-in power supply) or from 12V, the possibility of powering video cameras from the monitor (output 13.5V, 1.5A) .The coordinate outdoor panelsare connected via the interface module MK-032K (not included).

Video monitor Tantos Amelie VZ with a screen 7 "", hands free, control is carried out by touch buttons. Connection of 2 outdoor panels and 2 cameras, the ability to connect up to 4 monitors in one system with the wide possibilities of the address intercom. Voice mail, photo frame, built-in DVR (motion detector for 1 channel) Ability to set the melody in MP3 format as a ring signal (in firmware above 3.10). The video monitor is fully adapted for connection to coordinate door phones - METAKOM, VIZIT, CYFRAL and their analogues, without using the interface module.

Video intercom Tantos LILU lux with color TFT monitor 4.3 inches, hands free. Control is carried out by touch buttons. It is possible to connect 2 outdoor panels, as well as combine up to 4 monitors into one system with wide possibilities of the address intercom. Possibility to control 2 actuators (wicket lock and gate drive) using one external panel and external electronic relay TS-NC05 (not included). In the presence there are 25 melodies that can be set to an incoming call. TantosLilu lux includes intercom functions and listening to other monitors. It is possible to put the device in the "Do Not Disturb" mode, which is most often used at night. To the coordinate blocks of the call is connected via the interface module MK-032K (not included).

Video phone Tantos NEO with color monitor 7 inches, hands free. Control is carried out using a touch screen. It is possible to connect 2 outdoor panels, 2 video cameras, and also combine up to 4 monitors in one system with wide possibilities of the address intercom. It is possible to set the melody in MP3 format as a ringing tone (in firmware above 3.10). Tantos NEO includes voice mail, photo frame and built-in DVR (motion detector for 1 channel). To the coordinate outdoor panels is connected via the interface module MK-032K (not included).

Video phone Tantos PRIME with color TFT monitor 7 inches, hands free. Control is carried out by touch buttons. It is possible to connect 2 outdoor panels and 2 video cameras, as well as combine up to 4 monitors into one system with wide possibilities of the address intercom. Voice mail, photo frame, built-in DVR (motion detector for 1 channel). Ability to set the melody in MP3 format as a ringing tone (in firmware above 3.10). To the coordinate blocks of the call is connected via the interface module MK-032K (not included).

MKV-SET is designed for use in video surveillance systems when transmitting a signal from a video camera or other standard video source over a twisted pair of wires for a distance of up to 1500 m to a consumer (monitor, console, VCR, etc.). Set provides the possibility to use free twisted pairs in existing computer and telephone communication lines. The MKV set devices have a matched input and output resistance, which eliminates image distortion during transmission. The set is powered from unstabilized sources of constant voltage, and voltage ripple doesn’t affect the signal quality.

The METAKOM MKV-D4 (C) video splitter is designed to amplify and distribute a video signal from one source to multiple users, i.e. for connection of user video monitors to the main line of the standard video signal in the intercom system.

The METAKOM MKV-D4 video splitter is designed for distributing video signal from one source to several consumers for a distance of up to 30 m, i.e. for connection of user video monitors to the main video signal line as part of METAKOM intercoms.

Our Allen-Bradley® ASEM™ 6300 is a complete portfolio of open architecture industrial PCs, thin clients and monitors. This broad and adaptable line offers the flexibility you need to meet your specific performance requirements. This product family is a solid match for customers that need a high-performance Human Machine Interface (HMI) solution for industrial environments. By integrating completely with our FactoryTalk® View SE and FactoryTalk View ME software, it allows for seamless assimilation within your facility.

The ASEM 6300M industrial monitor includes a ten-point multitouch screen that can also be operated with gloves. The touch screens are pre-calibrated so that recalibration is not necessary. These monitors are optimized to work with the ASEM 6300 computer and thin client portfolio to create a visualization, maintenance, control or information computing solution.

Design considerations are becoming more important in the machine-builder world. Low Profile bezels on wide screen displays and monitors provide that ultra-modern look to visually set this equipment apart from the crowd. Additionally, ASEM 6300M has various design options available making this robust product family a great choice for plant floor environments.